Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Vehicle Equipment: for vehicles with gearshift linkage
- Fitting Position: Connector rod to console
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Fitting Position: at the intermediate lever
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Vehicle Equipment: for vehicles with gearshift linkage
- Fitting Position: Centre
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Fitting Position: transmission sided
-
Manufacturer: JP GROUP A/
S - Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Transmission Type: Manual Transmission
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Fitting Position: Front
- Vehicle Equipment: for vehicles with gearshift linkage
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Vehicle Equipment: for vehicles with gearshift linkage
- Fitting Position: Rear
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Installatsiooni pool: Ühendusvarras konsoolil
- Manufacturer: 3RG
- Installatsiooni pool: Vahehooval
- Manufacturer: 3RG
- Vehicle Equipment: for vehicles with gearshift linkage
- Quantity per packing unit: 10
- Weight [kg]: 0.003
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity per packing unit: 10
-
Fitting Position: at gearshift linkage,
Connector rod to console - Colour: Milk White
- Manufacturer: TOPRAN
Vehicle Equipment: for vehicles with gearshift linkage, for vehicles with manual transmission General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Quantity per packing unit: 5
-
Fitting Position: at the intermediate lever,
at gearshift linkage - Colour: Ivory White
- Vehicle Equipment: for vehicles with manual transmission
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Transmission Type: Manual Transmission
- for OE number: 1H0711595
- Manufacturer: DELLO AUTOMEGA
- Vehicle Equipment: for vehicles with gearshift linkage
-
Material: GRP
(Glass fibre Reinforced Plastic) - Housing material: Polyamid 6.6
- Overall Length [mm]: 64.1
- Mounting Type: Clipped
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Quantity per packing unit: 4
- Pikkus (mm): 60
-
Kaal (kg): 0,
009 - vajaminev tükihulk: 1
- Kaal (g): 9
- Manufacturer: METALCAUCHO
- Quantity per packing unit: 10
- for OE number: 191 711 135 A
- Weight [kg]: 0.02
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Transmission Type: Manual Transmission
- Manufacturer: DELLO AUTOMEGA
- Vehicle Equipment: for vehicles with gearshift linkage
-
Housing material: GRP
(Glass fibre Reinforced Plastic) - Shaft Material: Metal
- Mounting Type: Clipped
- Shaft Form: straight
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Vehicle Equipment: for vehicles with gearshift linkage
- Quantity per packing unit: 20
- Weight [kg]: 0.008
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity per packing unit: 10
-
Fitting Position: Upper,
Lower - Inner Diameter [mm]: 14.1
- Outer Diameter [mm]: 23.7
- Height [mm]: 15.1
- Material: Plastic
- Transmission Type: for manual transmission
- Colour: Milk White
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Installatsiooni pool: ees
- Pikkus (mm): 220
-
Kaal (kg): 0,
06 - vajaminev tükihulk: 1
- Kaal (g): 60
- Manufacturer: METALCAUCHO
- Manufacturer: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Vehicle Equipment: for vehicles with gearshift linkage
- Material: Plastic
-
Colour: Orange,
black - for OE number: 191711190B
- Manufacturer: DELLO AUTOMEGA
- Vehicle Equipment: for vehicles with gearshift linkage
- Mounting Type: Bushing
- Supplementary Article/Supplementary Info: with Plastic Bushing
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Vehicle Equipment: for vehicles with gearshift linkage
- Manufacturer: 3RG
Manufacturer: METALCAUCHO
- Üldine informatsioon: bearing ring
- Manufacturer: VIKA
- Vehicle Equipment: for vehicles with gearshift linkage
- Fitting Position: at gearshift linkage
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Värv: must
- Manufacturer: DPA
Üldine informatsioon: gearstick knob with boot for gearstick lever; black
- Colour: black
-
Transmission Type: 5-
Speed Manual Transmission - Manufacturer: JP GROUP
-
Lisainfo: Gear knob,
1- 5 + R -
Additional information: Gear knob,
1- 5 + R
- Transmission Type: Manual Transmission
- Manufacturer: DELLO AUTOMEGA
- Käikude arv: 8 käiku
- Piirangutega toode/piirangu info 2: ilma kaitsekummita
- Üldine informatsioon: 5 speed; black knob
- Manufacturer: DPA
-
Kaal (kg): 0,
25 - Manufacturer: 3RG
- Vehicle Equipment: for vehicles with gearshift linkage
- Lisainfo: Relay shaft for shift mechanism
- Additional information: Relay shaft for shift mechanism
- Vehicle Equipment: for vehicles with manual transmission
- Colour: black
- Colour Code: C22
- Surface: Synthetic leather
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Vehicle Equipment: for vehicles with manual transmission
- Colour: black
- Manufacturer: JP GROUP
-
Lisainfo: Boot for gear shift lever,
black -
Additional information: Boot for gear shift lever,
black
- Transmission Type: Manual Transmission
- for OE number: 1H0711116A
- Manufacturer: DELLO AUTOMEGA
- Vehicle Equipment: for vehicles with gearshift linkage
- Weight [kg]: 0.27
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Transmission Type: for manual transmission
- Installatsiooni pool: Käiguhoovastiku süsteemil
- Pikkus (pikk külg) [mm]: 110
- Manufacturer: 3RG
- Sõidukivarustus: sõidukitele ilma automaatkäigukastita
- Üldine informatsioon: gearshift lever
- Manufacturer: VIKA
-
Kaal (kg): 0,
03 - Siseläbimõõt [mm]: 8
- Manufacturer: METALCAUCHO
-
Kaal (kg): 0,
04 - Siseläbimõõt [mm]: 10
- Manufacturer: METALCAUCHO
- Siseläbimõõt [mm]: 8
- Manufacturer: 3RG
- Üldine informatsioon: gearstick knob
- Manufacturer: VIKA
- Käigukasti liik: Käigukast 5 käiku
- Värvimarkeering: must
- Manufacturer: METALCAUCHO
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks