• Inner Diameter [mm]: 50
• Thickness [mm]: 4
• Material: NBR (nitrile butadiene rubber)
• Manufacturer: METZGER

• Vehicle Identification Number (VIN) to: 1H-NW550000
• Observe system fill quantity:
• Hose Type: Moulded Hose
• Cooling Hose: from water pipe to water pump
• Material: Rubber with fabric lining
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 12.1994
• Cooling Hose: from engine to water pipe
• Manufacturer: JP GROUP
• Lisainfo: Radiator hose, engine block to water pipe
• Additional information: Radiator hose, engine block to water pipe

• Vehicle Identification Number (VIN) to: 1H-NW550000
• Observe system fill quantity:
• Hose Type: Moulded Hose
• Cooling Hose: from oil cooler to water pipe
• Material: Rubber with fabric lining
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: 1Z
• Vehicle Identification Number (VIN) to: 1H-NW550 000
• Cooling Hose: from waterpump to connecting pipe
• Weight [kg]: 0.042
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Weight [kg]: 0.04
• Weight [g]: 40
• Cooling Hose: from water pump to water pipe
• Manufacturer: METALCAUCHO

• Vehicle Identification Number (VIN) to: 1H-NW550000
• Cooling Hose: from oil cooler to water pipe
• Lisainfo: Radiator hose, water pipe to oil cooler
• Additional information: Radiator hose, water pipe to oil cooler

• Weight [kg]: 0.06
• Weight [g]: 60
• Manufacturer: METALCAUCHO

• Inner Diameter 1 [mm]: 16
• Inner Diameter 2 [mm]: 16
• Guarantee: 3 years guarantee
• Weight [kg]: 0.08
• Colour: black
• Hose Length [mm]: 163
• Suitable for vehicle type: PC (passenger car)
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 24SKV366

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• Length [mm]: 113
• Inner Diameter [mm]: 18
• Cooling Hose: from water pump to water pipe
• Guarantee: 3 years guarantee
• Weight [kg]: 0.06
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 24SKV365

• Production date from: 01/92
• Production date to: 12/94
• Cooling Hose: from connecting pipe to heat exchanger
• Fitting Position: Centre right
• for OE number: 068121063M
• Manufacturer: SASIC

• Transmission Type: Manual Transmission
• Cooling Hose: from engine cooler to water pump
• Fitting Position: Lower
• Manufacturer: DELLO AUTOMEGA

• Cooling Hose: Piping to heat exchanger
• Forward- /Backflow: for foreflow
• Fitting Position: Upper
• Manufacturer: DELLO AUTOMEGA

• Transmission Type: Manual Transmission
• Fitting Position: Lower
• Observe system fill quantity:
• Hose Type: Moulded Hose
• Cooling Hose: from engine cooler to water pump
• Material: Rubber with fabric lining
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Length [mm]: 420
• Cooling Hose: from engine to heat exchanger
• Guarantee: 3 years guarantee
• Weight [kg]: 0.18
• Always compare old and new part (in particular OE No.):
• Name: CE 43SKV710
• Manufacturer: ESEN SKV

• Engine Code: 1Z
• Vehicle Identification Number (VIN) to: 1H-NW550 000
• Inner Diameter [mm]: 18
• Cooling Hose: from water pump to water pipe
• Hose Length [mm]: 113
• Weight [kg]: 0.041
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: 1Z
• Vehicle Identification Number (VIN) to: 1H-SW385 334
• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 22
• Cooling Hose: from expansion tank to water pipe
• Weight [kg]: 0.1
• Manufacturer: FEBI BILSTEIN

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Cooling Hose: from engine to heat exchanger
• Forward- /Backflow: for foreflow
• Manufacturer: JP GROUP
• Lisainfo: Radiator hose, feed, heat exchanger to engine
• Additional information: Radiator hose, feed, heat exchanger to engine

• Transmission Type: Manual Transmission
• Cooling Hose: from engine cooler to water pump
• Manufacturer: JP GROUP
• Lisainfo: Radiator hose, lower, radiator to water pump
• Additional information: Radiator hose, lower, radiator to water pump

• Cooling Hose: from engine to engine cooler
• Forward- /Backflow: for foreflow
• Fitting Position: Upper Right
• Manufacturer: DELLO AUTOMEGA

• Vehicle Equipment: for vehicles with automatic climate control
• Number of inlets/outlets: 3
• for pipe diameter [mm]: 20
• Heating/Cooling: with thermal switch connector
• Shape: T Shape (T Piece)
• Material: Plastic
• Manufacturer: METZGER

• Cooling Hose: from engine to heat exchanger
• Hose Length [mm]: 420
• Weight [kg]: 0.17
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Cooling Hose: from engine to heat exchanger
• Hose Length [mm]: 420
• Weight [kg]: 0.17
• Name: SW 30 93 3535
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Production date from: 01/92
• Cooling Hose: from connecting pipe to heat exchanger
• Fitting Position: Centre left
• for OE number: 1H0819373C
• Manufacturer: SASIC

• Fitting Position: Lower
• Vehicle Equipment: for vehicles with air conditioning
• Colour: black
• Hose Length [mm]: 325
• Inner Diameter 1 [mm]: 31
• Inner Diameter 2 [mm]: 31
• Observe broschure:
• Manufacturer: GATES

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• Material: Rubber
• General Information: coolant hose; rubber
• Manufacturer: VIKA

• Vehicle Equipment: for vehicles with air conditioning
• Fitting Position: Lower
• Observe system fill quantity:
• Hose Type: Moulded Hose
• Cooling Hose: from engine cooler to water pump
• Material: Rubber with fabric lining
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Type: Manual Transmission
• Cooling Hose: from engine to engine cooler
• Fitting Position: Upper
• Manufacturer: JP GROUP
• Lisainfo: Radiator hose, upper, radiator to engine
• Additional information: Radiator hose, upper, radiator to engine

• Transmission Type: Manual Transmission
• Fitting Position: Upper
• Observe system fill quantity:
• Hose Type: Moulded Hose
• Cooling Hose: from engine to engine cooler
• Material: Rubber with fabric lining
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 1H0819371
• Weight [g]: 223
• Cooling Hose: from distributor to heat exchanger
• Length [mm]: 433
• Inner Diameter 1 [mm]: 24
• Inner Diameter 2 [mm]: 19
• Name: IM 221114
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Upper
• Transmission Type: Manual Transmission
• Colour: black
• Hose Length [mm]: 540
• Inner Diameter 1 [mm]: 31
• Inner Diameter 2 [mm]: 31
• Observe broschure:
• Manufacturer: GATES

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• for OE number: 1H0121051B
• Weight [g]: 221
• Cooling Hose: from engine cooler to water pump
• Length [mm]: 284
• Inner Diameter 1 [mm]: 32
• Inner Diameter 2 [mm]: 32
• Name: IM 222016
• Manufacturer: ORIGINAL IMPERIUM

• Cooling Hose: from engine to oil cooler and water pump
• Fitting Position: Lower
• Manufacturer: DELLO AUTOMEGA

Manufacturer: DELLO AUTOMEGA

• Transmission Type: Manual Transmission
• Vehicle Equipment: for vehicles without air conditioning
• Length [mm]: 133
• Weight [kg]: 0.25
• Required quantity: 1
• Weight [g]: 250
• Manufacturer: METALCAUCHO

• Transmission Type: Manual Transmission
• Vehicle Equipment: for vehicles without air conditioning
• Number of inlets/outlets: 3
• Observe system fill quantity:
• Hose Type: Moulded Hose
• Cooling Hose: from engine to oil cooler and water pump
• Material: Rubber with fabric lining
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) from: 1H-NW550 001
• Cooling Hose: from water pump to water pipe
• Manufacturer: JP GROUP

Lisainfo: Radiator hose, oil cooler to water pipe and water pump Additional information: Radiator hose, oil cooler to water pipe and water pump

• Production date from: 09/93
• Cooling Hose: from connecting pipe to engine cooler
• Fitting Position: Upper Right
• for OE number: 1H0121101B
• Manufacturer: SASIC

• Number of inlets/outlets: 3
• Observe system fill quantity:
• Hose Type: Moulded Hose
• Material: Rubber with fabric lining
• Manufacturer: TOPRAN

Cooling Hose: from oil cooler to water pump, from water pipe to oil cooler General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Cooling Hose: from water pipe to water pump
• for OE number: 028121053Q
• Manufacturer: SASIC

• Fitting Position: Upper
• Outer Diameter [mm]: 31
• Cooling Hose: from engine to engine cooler
• Guarantee: 3 years guarantee
• Weight [kg]: 0.3
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Upper
• Transmission Type: Manual Transmission
• Cooling Hose: from thermostat to radiator
• Weight [kg]: 0.25
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: Manual Transmission
• Vehicle Equipment: for vehicles without air conditioning
• Cooling Hose: from thermostat to waterpump
• Inner Diameter 1 [mm]: 23
• Inner Diameter 2 [mm]: 23
• Guarantee: 3 years guarantee
• Weight [kg]: 0.24
• Colour: black
• Hose Length [mm]: 337
• Suitable for vehicle type: PC (passenger car)
• Always compare old and new part (in particular OE No.):
• Name: CE 24SKV341
• Manufacturer: ESEN SKV

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• Transmission Type: Manual Transmission
• Vehicle Equipment: for vehicles without air conditioning
• Cooling Hose: from engine to oil cooler and water pump
• Manufacturer: JP GROUP

Lisainfo: Radiator hose, water pump to oil cooler and water flange Additional information: Radiator hose, water pump to oil cooler and water flange

• Transmission Type: Automatic Transmission
• Fitting Position: Upper
• Observe system fill quantity:
• Hose Type: Moulded Hose
• Heating/Cooling: with thermal switch connector
• Supplementary Article/Info 2: with clip, with seal ring
• Cooling Hose: from engine to engine cooler
• Material: Rubber with fabric lining
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Equipment: for vehicles with air conditioning
• Cooling Hose: from engine cooler to water pump
• Outer Diameter 1 [mm]: 39
• Outer Diameter 2 [mm]: 39
• Inner Diameter 1 [mm]: 31
• Weight [kg]: 0.194
• Inner Diameter 2 [mm]: 31
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Manual Transmission
• Vehicle Equipment: for vehicles without air conditioning
• Outer Diameter [mm]: 31
• Cooling Hose: from engine to engine cooler
• Fitting Position: Upper
• Weight [kg]: 0.25
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Material: Metal
• Manufacturer: JP GROUP
• Lisainfo: Water pipe
• Additional information: Water pipe

• Cooling Hose: from engine cooler to water pump
• Fitting Position: Lower Right
• Vehicle Equipment: for vehicles with air conditioning
• Transmission Type: Automatic Transmission
• Manufacturer: METZGER

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• Material: Steel Pipe
• Number of inlets/outlets: 3
• Supplementary Article/Supplementary Info: with holder
• Consult accessories list for recommended additional repairs:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Equipment: for vehicles without air conditioning
• Cooling Hose: from engine to oil cooler and water pump
• Hose Length [mm]: 133
• Weight [kg]: 0.165
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 4
• Material: Metal
• Manufacturer: 3RG

• Material: Rubber
• Weight [g]: 214
• new version:
• Length [mm]: 320
• Inner Diameter 1 [mm]: 23
• Inner Diameter 2 [mm]: 23
• Name: IM 220764/1
• Manufacturer: ORIGINAL IMPERIUM

• for OE number: 37122058
• Weight [g]: 230
• Cooling Hose: from water pump to water pipe
• Inner Diameter 1 [mm]: 20
• Inner Diameter 2 [mm]: 19
• Name: IM 221834
• Manufacturer: ORIGINAL IMPERIUM

• Quantity: 1
• Material: Steel Pipe
• General Information: coolant pipe; iron
• Manufacturer: VIKA

• Weight [kg]: 0.51
• Number of Holes: 4
• Weight [g]: 510
• Number of mounting bores: 3
• Manufacturer: METALCAUCHO

• Guarantee: 3 years guarantee
• Weight [kg]: 0.3
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Cooling Hose: from engine to oil cooler and water pump
• Supplementary Article/Info 2: without clamps
• Manufacturer: MEYLE

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• Weight [kg]: 0.52
• Number of Holes: 4
• Weight [g]: 520
• Number of mounting bores: 3
• Manufacturer: METALCAUCHO

• Cooling Hose: from engine to oil cooler and water pump
• Material: Rubber with fabric lining
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.