Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 17
- Length from [mm]: 33
- Material: Rubber
Lisainfo: "Tootja: SRL
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"
- Stabiliser Diameter [mm]: 22
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 19
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 10
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Vehicle Identification Number (VIN) to: 1E2015000
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Fitting Position: Front Axle
- Inner Diameter [mm]: 19
- Manufacturer: DENCKERMANN ZAWIESZENIE
- Quantity per packing unit: 10
-
Fitting Position: Front Axle Left,
Front Axle Right - Mounting Type: Rubber Mount
- Weight [kg]: 0.04
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
- Length [mm]: 33
- Inner Diameter [mm]: 17
- Manufacturer: DENCKERMANN ZAWIESZENIE
-
Vehicle Identification Number (VIN) to: 1H-
SB019 475, 1H- SW062 538 -
Fitting Position: inner,
Front -
Vehicle Identification Number (VIN) from: F 1H-
SW062 539, F 1H- SB019 476 - Mounting Type: Rubber Mount
- Manufacturer: DELLO AUTOMEGA
- Construction Year from: 01.1994
-
Fitting Position: Front Axle Left,
Front Axle Right, inner - Inner Diameter [mm]: 17
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Fitting Position: Front Axle Left,
Front Axle Right - Material: Rubber
- Length [mm]: 33
- Inner Diameter [mm]: 17
- Manufacturer: MERTZ
-
Stabiliser Diameter [mm]: 20,
21.5 - Block Separation:
- Quantity per packing unit: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Mounting Type: Rubber Mount
- Inner Diameter [mm]: 19
- Replace in pairs only:
- Shape: slotted
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Rod/Strut: Coupling Rod
- Fitting Position: Front Axle
- Weight [kg]: 0.015
- General Information: rubber bush
- Manufacturer: VIKA
- Length [mm]: 33
- Inner Diameter [mm]: 17
- Material: Rubber
- Fitting Position: Front Axle
- Weight [kg]: 0.026
-
Name: Paigutus -
Kndmik VW P. GOLF/ POLO WEW - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Inner Diameter [mm]: 18
- Mounting Type: Rubber Mount
- Length [mm]: 28
- Required quantity: 2
- Weight [kg]: 0.025
- Fitting Position: Front Axle
-
Name: Paigutus -
Kndmik VW P. GOLF/ POLO/ CAD - Manufacturer: TED
- Required quantity: 2
-
Fitting Position: inner,
Front Axle - Weight [kg]: 0.03
- Length [mm]: 28
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 17
-
Name: Kinnitus,
stabilisaator - Manufacturer: TED
- Construction Year from: 01.1994
-
Fitting Position: inner,
Front Axle Left, Front Axle Right - Inner Diameter [mm]: 17
- Required quantity: 2
-
Name: Paigutus -
Kndmik VW P. GOLF/ POLO WE - Manufacturer: MEY
- Fitting Position: Front Axle
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 19
- SVHC: No SVHC present!
- Manufacturer: FAG
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: GSP ZAWIESZENIE
- Quantity per packing unit: 2
-
Fitting Position: Front Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Diameter [mm]: 20
- Inner Diameter [mm]: 18.5
- Length [mm]: 32
- Width [mm]: 34
- Height [mm]: 35
- for OE number: 1H0411314
- Manufacturer: SASIC
- Stabiliser Diameter [mm]: 21.5
-
Fitting Position: inner,
Front Axle Left, Front Axle Right - Inner Diameter [mm]: 19
- Required quantity: 2
-
Name: Paigutus -
Kndmik VW P. GOLF/ POLO WE - Manufacturer: MEY
- Quantity per packing unit: 2
-
Fitting Position: Front Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Diameter [mm]: 17
- Inner Diameter [mm]: 15.5
- Length [mm]: 36
- Width [mm]: 28
- Height [mm]: 37
- for OE number: 191411314
- Manufacturer: SASIC
-
Stabiliser Diameter [mm]: 22,
20 -
for PR number: 0AB,
0AF, 0AH, 0AJ - Block Separation:
- Inner Diameter [mm]: 19
- Material: Rubber
- Fitting Position: Front Axle
- Weight [kg]: 0.026
-
Name: Paigutus -
Kndmik VW P. GOLF/ POLO WEW - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle,
Right, Left - Stabiliser Diameter [mm]: 21.5
- Diameter [mm]: 19
- Weight [kg]: 0.02
- Manufacturer: CORTECO
- Fitting Position: Front Axle both sides
- Required quantity: 2
- Inner Diameter [mm]: 17
- paired article number: VKDS 351006
- Manufacturer: SKF
- Fitting Position: Front Axle both sides
- Required quantity: 2
- paired article number: VKDS 351022
- Height [mm]: 36
- Inner Diameter [mm]: 19
- Manufacturer: SKF
-
Fitting Position: Front,
Left, Right - Diameter [mm]: 17
- Quantity per packing unit: 2
- Inner Diameter 1 [mm]: 17
- Outer Diameter 1 [mm]: 35
- Thickness 1 [mm]: 32
- Manufacturer: DELPHI
-
Fitting Position: Front,
Left, Right - Diameter [mm]: 19
- Quantity per packing unit: 2
- Inner Diameter 1 [mm]: 19
- Thickness 1 [mm]: 32.5
- Manufacturer: DELPHI ZAWIESZENIE
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Stabilizer mount left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
VW GOLF 4/OCTAV/LEON
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
VW GOLF 4/OCTAV/LEON
(kvaliteediklass: PJ)"
- Fitting Position: Axle beam
- General Information: Rubber bush
- Manufacturer: BORSEHUNG
- Diameter 4 [mm]: 17
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Stabilizer mount left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"
- Stabiliser Diameter [mm]: 21.5
-
Fitting Position: Front Axle Left,
Front Axle Right, inner - Mounting Type: Rubber Mount
- Quantity per axle: 2
- Manufacturer: LEMFORDER
- Name: LMI 2746101
SVHC: No information available, please contact the manufacturer!
- Mounting Type: Rubber Mount
- Fitting Position: Front Axle both sides
- Weight [kg]: 0.014
- Inner Diameter [mm]: 11
- Length [mm]: 15
- Manufacturer: RTS
- Length [mm]: 48
- Width [mm]: 30
- Thickness [mm]: 30
- Inner Diameter [mm]: 16.2
- Material: Rubber
- Fitting Position: Rear Axle
- Weight [kg]: 0.037
-
Name: Kinnitus,
stabilisaator - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle both sides
- Mounting Type: Rubber Mount
- Length [mm]: 35
- Inner Diameter [mm]: 19
- Weight [kg]: 0.026
- Manufacturer: RTS
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks