• Construction Year from: 08.1994
• Installatsiooni pool: Esisild
• Lisainfo: Antud 1 tk hind.
• Additional information: Antud 1 tk hind.

• Construction Year from: 08.1994
• Construction Year to: 07.1995
• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: 1H-SB019475, 1H-SW062538
• Suspension: for vehicles with standard suspension
• Amorditüüp: Õlisurve
• Amort-Ehitusliik: Vedruamort
• Amort-süsteem: kaks toru
• Amort-kinnitusliik: ülemine tihvt, Rõngaskinnituse all
• Kaal (kg): 3,9
• Ava läbimõõt [mm]: 27
• Kolvivarda läbimõõt [mm]: 20
• soovitava lisavarustuse artiklinumber: MK067, PK001
• pakendi pikkus [cm]: 51,5
• pakendi laius [cm]: 16,2
• pakendi kõrgus [cm]: 16,2
• Manufacturer: MONROE
• Lisainfo: 11250 MON
• Additional information: 11250 MON

Garantii: Paarikaupa vahetamisel garantii koos lisadega 5 aastat

• Installatsiooni pool: Esisild
• Materjal: Plastik
• Värv: must
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Jämedus/Tugevus (mm): 90
• Materjal: Plastik
• Installatsiooni pool: Tagasild
• Kaal (kg): 0,03
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• uus mudel:
• Pikkus (mm): 84
• Siseläbimõõt [mm]: 54
• Välisläbimõõt [mm]: 75, 67
• Värv: must
• Materjal: Plastik
• Installatsiooni pool: Esisild
• Kaal (kg): 0,032
• Manufacturer: FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Weight [kg]: 0.068
• Thickness [mm]: 225
• Material: Thermoplastic polyester elastomer
• Required quantity: 2
• General Information: protective pipe; front
• Manufacturer: VIKA

• Engine Code: ABD
• Vehicle Identification Number (VIN) to: 1H-SB019 475, 1H-SW062 538
• Installatsiooni pool: Esisild
• Materjal: Termoplast
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Vehicle Identification Number (VIN) from: ******1H*SB019476, ******1H*SW062539
• Jämedus/Tugevus (mm): 225
• Materjal: termoplastilised polüester-elastomeerid
• Installatsiooni pool: Esisild
• Kaal (kg): 0,068
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 1H-SB019 476, 1H-SW062 539
• Quantity per packing unit: 2
• Installatsiooni pool: Esisild
• Kaal (kg): 0,069
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) to: ******1H*SB019475, ******1H*SW062538
• Pikkus (mm): 172,5
• Materjal: Termoplast
• Installatsiooni pool: Esisild
• Kaal (kg): 0,049
• OE-numbri jaoks: 357 413 175
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: esisild mõlemapoolselt
• Üldine informatsioon: dust boot
• Manufacturer: BORSEHUNG

• Fitting Position: Front
• Length [mm]: 210
• Weight [kg]: 0.08
• Material: Rubber
• Weight [g]: 80
• Inner Diameter 1 [mm]: 18
• Inner Diameter 2 [mm]: 71
• Manufacturer: METALCAUCHO

• Vehicle Identification Number (VIN) to: ******1H*SB019475, ******1H*SW062538
• Suspension: for vehicles with bad road version
• Jämedus/Tugevus (mm): 228,5
• Materjal: Termoplast
• Installatsiooni pool: Esisild
• Kaal (kg): 0,064
• OE-numbri jaoks: 1H0 413 175
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 1H-S-062 539
• Installatsiooni pool: esisild vasakul, esisild paremal
• Manufacturer: LEMFORDER

• Suspension: for vehicles without bad road version
• Installatsiooni pool: Tagasild
• Piirangutega toode/piirangu info: koos vedrutaldrikuga
• Amorditüüp: Õlisurve
• Amort-kinnitusliik: Silma all, ülemine tihvt
• Amort-Ehitusliik: Vedruamort
• Manufacturer: KAMOKA AMORTYZATORY

• Construction Year to: 07.1995
• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Article number of recommended accessories: MK133, PK017
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• max. length [mm]: 636
• Name: CFD 529995
• Manufacturer: DACO

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Amort-Ehitusliik: Teleskoop-amort
• Amort-kinnitusliik: ülemine tihvt, Silma all
• Amorditüüp: Õlisurve
• Amort-süsteem: kaks toru
• Manufacturer: ABAKUS DEPO/LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Suspension: for vehicles without bad road version
• Installatsiooni pool: Tagasild
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamordi kasutus
• Amort-kinnitusliik: ülemine tihvt, Silma all
• Amort-süsteem: kaks toru
• Manufacturer: JP GROUP
• Lisainfo: Shock Absorber
• Additional information: Shock Absorber

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Oil Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-694705
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Manufacturer: AUTO-GH

• Suspension: for vehicles without bad road version
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: DACO GERMANY

• Installatsiooni pool: Tagasild
• Amorditüüp: Õlisurve
• Amort-Ehitusliik: Vedruamort
• Amort-kinnitusliik: ülemine tihvt, Silma all
• Manufacturer: JP GROUP
• Lisainfo: Shock absorber, rear
• Additional information: Shock absorber, rear

• Suspension: for vehicles with bad road version
• Installatsiooni pool: Tagasild
• Amorditüüp: Õlisurve
• Amort-Ehitusliik: Vedruamordi kasutus
• Amort-kinnitusliik: ülemine tihvt, Silma all
• Amort-süsteem: kaks toru
• Manufacturer: JP GROUP
• Lisainfo: Shock absorber, rear, heavy duty
• Additional information: Shock absorber, rear, heavy duty

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Manufacturer: DENCKERMANN AMORTYZATORY

• Shock Absorber Type: Oil Pressure
• Fitting Position: Rear Axle
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Name: Oil shock absorber
• Quality class: PJ

Lisainfo: "Tootja: SRL
VW GOLF II /III
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
VW GOLF II /III
(kvaliteediklass: PJ)"

• Installatsiooni pool: Tagasild
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamordi kasutus
• Amort-kinnitusliik: ülemine tihvt, Silma all
• Amort-süsteem: kaks toru
• Lisainfo: Shock absorber, rear, gas
• Additional information: Shock absorber, rear, gas

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Amorditüüp: Õlisurve
• Amort-Ehitusliik: vedrukandev amort
• Amort-süsteem: kaks toru
• Amort-kinnitusliik: ülemine tihvt, Silma all
• Läbimõõt [mm]: 39
• Pikkus 1 [mm]: 636
• Pikkus 2 [mm]: 422
• Kolvivarda läbimõõt [mm]: 12
• Hulk telje kohta: 1
• Tehnilisi andmeid jälgida:
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Manufacturer: TRW AMORTYZATORY

• Suspension: for vehicles with standard suspension
• Construction Year to: 08.1994
• Shock Absorber Type: Gas Pressure
• Fitting Position: Rear Axle
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Name: Gas shock absorber
• Quality class: PJ

Lisainfo: "Tootja: SRL
VW GOLF II/III
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
VW GOLF II/III
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort
• Amort-süsteem: kaks toru
• Amort-kinnitusliik: ülemine tihvt
• Manufacturer: ABAKUS DEPO/LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Construction Year to: 07.1994
• Vehicle Identification Number (VIN) to: 1H-SB019475, 1H-SW062538
• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Article number of recommended accessories: MK033
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Name: CFD 429950
• Manufacturer: DACO

• Construction Year to: 07.1995
• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Manufacturer: OYODO

• Installatsiooni pool: Tagasild
• Amort-süsteem: kaks toru
• Amort-kinnitusliik: ülemine tihvt, Silma all
• Amorditüüp: Gaasirõhk
• soovitava lisavarustuse artiklinumber: SMA0242
• Amort-Ehitusliik: Teleskoop-amort
• Manufacturer: ASHIKA-AMORTYZATORY

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Construction Year to: 08.1994
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Pin
• Shock Absorber System: Twin-Tube
• Manufacturer: DENCKERMANN AMORTYZATORY

• Suspension: for vehicles without bad road version
• Installatsiooni pool: Esisild
• Amorditüüp: Õlisurve
• Amort-kinnitusliik: ülemine tihvt
• Amort-Ehitusliik: Vedruamort
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Type: Gas Pressure
• Article number of recommended accessories: SMJ0242
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: JAPKO

• Installatsiooni pool: Tagasild
• Amort-kinnitusliik: ülemine tihvt, Silma all
• Amorditüüp: Õlisurve
• soovitava lisavarustuse artiklinumber: SMA0242
• Amort-Ehitusliik: Vedruamort
• Manufacturer: ASHIKA-AMORTYZATORY

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: vedrukandev amort
• Amort-süsteem: kaks toru
• Amort-kinnitusliik: ülemine tihvt, Silma all
• Läbimõõt [mm]: 39
• Pikkus 1 [mm]: 636
• Pikkus 2 [mm]: 422
• Kolvivarda läbimõõt [mm]: 12
• Hulk telje kohta: 1
• Tehnilisi andmeid jälgida:
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Manufacturer: TRW AMORTYZATORY

• Installatsiooni pool: Tagasild
• Amort-Ehitusliik: vedrukandev amort
• Amort-kinnitusliik: ülemine tihvt
• Amorditüüp: Gaasirõhk
• Amort-süsteem: kaks toru
• Vedrustustüüp: Kruvivedrustusega sõidukile
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Construction Year from: 09.1994
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Pin
• Shock Absorber System: Twin-Tube
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Amorditüüp: Õlisurve
• Amort-Ehitusliik: Vedruamort
• Amort-süsteem: kaks toru
• Amort-kinnitusliik: ülemine tihvt
• Manufacturer: ABAKUS DEPO/LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-694705
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Manufacturer: AUTO-GH

• Suspension: for vehicles without bad road version
• Installatsiooni pool: Esisild
• Amorditüüp: Gaasirõhk
• Amort-kinnitusliik: ülemine tihvt
• Amort-süsteem: kaks toru
• Amort-Ehitusliik: Vedruamort
• Manufacturer: KAMOKA AMORTYZATORY
• Additional information: 2000198 KAMOKA
• Lisainfo: 2000198 KAMOKA

• Vehicle Identification Number (VIN) to: 1H SB019475, 1H SW062 538
• Installatsiooni pool: Esisild
• Amorditüüp: Õlisurve
• Amort-Ehitusliik: Vedruamort
• Amort-kinnitusliik: ülemine tihvt
• Manufacturer: JP GROUP
• Lisainfo: Suspension strut, complete, front
• Additional information: Suspension strut, complete, front

• Suspension: for vehicles without bad road version
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Name: CFD 454786
• Manufacturer: DACO

• Name: Oil shock absorber
• Quality class: PJ

Lisainfo: "Tootja: MAGNETI MARELLI
VW GOLF III 90-91
(kvaliteediklass: Q)"

• Fitting Position: Rear Axle
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Type: Oil Pressure
• Article number of recommended accessories: SMJ0242
• Shock Absorber Design: Suspension Strut
• Manufacturer: JAPKO

• Construction Year to: 08.1994
• Installatsiooni pool: Esisild
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort
• Amort-süsteem: kaks toru
• Amort-kinnitusliik: ülemine tihvt
• Lisainfo: Suspension strut, complete, front
• Additional information: Suspension strut, complete, front

• Suspension: for vehicles without bad road version
• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Manufacturer: DACO GERMANY

• Installatsiooni pool: Esisild
• Amorditüüp: Õlisurve
• Amort-kinnitusliik: ülemine tihvt
• Amort-süsteem: kaks toru
• Amort-Ehitusliik: Vedruamort
• Manufacturer: KAMOKA AMORTYZATORY
• Additional information: 2001047 KAMOKA
• Lisainfo: 2001047 KAMOKA

• Construction Year to: 07.1995
• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Amorditüüp: Õlisurve
• Amort-Ehitusliik: vedrukandev amort
• Amort-süsteem: kaks toru
• Amort-kinnitusliik: Silma all, ülemine tihvt
• Kaal (kg): 2,2
• Ava läbimõõt [mm]: 25
• Pikkus 1 [mm]: 423
• Pikkus 2 [mm]: 636
• Kolvivarda läbimõõt [mm]: 11
• soovitava lisavarustuse artiklinumber: MK133, PK017
• pakendi pikkus [cm]: 62
• pakendi laius [cm]: 13,8
• pakendi kõrgus [cm]: 13,8
• Manufacturer: MONROE

Garantii: Paarikaupa vahetamisel garantii koos lisadega 5 aastat

• Name: Gas shock absorber
• Quality class: PJ

Lisainfo: "Tootja: MAGNETI MARELLI
VW GOLF/JETTA/VENTO
(kvaliteediklass: Q)"

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Construction Year from: 09.1994
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Pin
• Shock Absorber System: Twin-Tube
• Manufacturer: DENCKERMANN AMORTYZATORY

• Construction Year to: 07.1994
• Vehicle Identification Number (VIN) to: 1H-SB019475, 1H-SW062538
• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Specification: Sport
• Article number of recommended accessories: MK033
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Name: CFD 459950
• Manufacturer: DACO

• Construction Year to: 07.1995
• Suspension: for vehicles with standard suspension
• Amorditüüp: Õlisurve
• Amort-Ehitusliik: Vedruamort
• Amort-kinnitusliik: Silma all, ülemine tihvt
• Pikkus (mm): 528
• Kaal (kg): 3,39
• Installatsiooni pool: Tagasild
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Name: Gas shock absorber
• Quality class: PJ

Lisainfo: "Tootja: SRL
VW GOLF III 94-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
VW GOLF III 94-
(kvaliteediklass: PJ)"

• Suspension: for vehicles without bad road version
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Manufacturer: KAVO PARTS

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Amort-Ehitusliik: Teleskoop-amort
• Amort-süsteem: kaks toru
• Amorditüüp: Gaasirõhk
• Tunnussuurus: SXOV25/12.5X214
• Amort-kinnitusliik: ülemine tihvt, Silma all
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Manufacturer: SACHS

• Installatsiooni pool: Esisild
• Amorditüüp: Õlisurve
• Amort-Ehitusliik: Vedruamort
• soovitava lisavarustuse artiklinumber: SMA0133, SMA0143, SMA0145, SMA0168
• Amort-kinnitusliik: ülemine tihvt
• Manufacturer: ASHIKA-AMORTYZATORY

• Installatsiooni pool: Esisild
• Amort-süsteem: kaks toru
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort
• soovitava lisavarustuse artiklinumber: SMA0133, SMA0143, SMA0145, SMA0168
• Amort-kinnitusliik: ülemine tihvt
• Manufacturer: ASHIKA-AMORTYZATORY

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Shock Absorber Type: Oil Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-694701
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin
• Manufacturer: AUTO-GH

• Fitting Position: Front Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Article number of recommended accessories: SMJ0133, SMJ0143, SMJ0145, SMJ0168
• Shock Absorber Mounting Type: Top pin
• Manufacturer: JAPKO

• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Article number of recommended accessories: SMJ0133, SMJ0143, SMJ0145, SMJ0168
• Shock Absorber Mounting Type: Top pin
• Manufacturer: JAPKO

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-694701
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin
• Manufacturer: AUTO-GH

• Construction Year to: 07.1995
• Fitting Position: Rear Axle
• Suspension: for vehicles with sports suspension
• Article number of recommended accessories: MK133, PK017
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: vedrukandev amort
• Amort-süsteem: kaks toru
• Amort-kinnitusliik: Silma all, ülemine tihvt
• Kaal (kg): 2,2
• Ava läbimõõt [mm]: 25
• Pikkus 1 [mm]: 419
• Pikkus 2 [mm]: 613
• Kolvivarda läbimõõt [mm]: 11
• soovitava lisavarustuse artiklinumber: MK133, PK017
• pakendi pikkus [cm]: 62
• pakendi laius [cm]: 13,8
• pakendi kõrgus [cm]: 13,8
• Manufacturer: MONROE

Garantii: Paarikaupa vahetamisel garantii koos lisadega 5 aastat

• Construction Year to: 08.1994
• Shock Absorber Type: Oil Pressure
• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Name: Oil shock absorber
• Quality class: PJ

Lisainfo: "Tootja: SRL
VW GOLF II/III
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
VW GOLF II/III
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• reinforced version:
• Alternatively:
• Amort-Ehitusliik: Teleskoop-amort
• Amort-süsteem: kaks toru
• Amorditüüp: Õlisurve
• Amort-kinnitusliik: ülemine tihvt, Silma all
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Manufacturer: SACHS

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• General Information: shock absorber; rear; gas
• Manufacturer: VIKA

• Construction Year to: 08.1994
• Installatsiooni pool: Esisild
• Amorditüüp: Õlisurve
• Amort-Ehitusliik: Vedruamort
• Amort-kinnitusliik: ülemine tihvt, Rõngaskinnituse all
• Amort-süsteem: kaks toru
• Manufacturer: BILSTEIN
• Name: BI 17-047142
• Quality class: Q

Lisainfo: "Tootja: BILSTEIN
SEAT/VW 96-
(kvaliteediklass: Q)"

• Name: Oil shock absorber
• Quality class: Q

Lisainfo: "Tootja: BILSTEIN
VW GOLF II/III
(kvaliteediklass: Q)"

• Name: Gas shock absorber
• Quality class: PJ

Lisainfo: "Tootja: SRL
VW PASSAT 91-
(kvaliteediklass: PJ)"

• Suspension: for vehicles without bad road version
• Installatsiooni pool: Tagasild
• Amort-süsteem: kaks toru
• Amort-kinnitusliik: ülemine tihvt, Silma all
• Amorditüüp: Gaasirõhk
• Piirangutega toode/piirangu info: ilma vedrutaldrikuta
• Amort-Ehitusliik: Teleskoop-amort
• Manufacturer: KAYABA AMORTYZATORY

Tehniline informatsioon: SP-001 is available to replace the old spring seat if damaged or unable to be reused.

• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• General Information: shock absorber; front; oil
• Manufacturer: VIKA

• Construction Year to: 08.1994
• Suspension: for vehicles with standard suspension
• Installatsiooni pool: Tagasild
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: vedrukandev amort
• Amort-kinnitusliik: Silma all, ülemine tihvt
• Amort-süsteem: kaks toru
• Manufacturer: BILSTEIN
• Name: BI 19-019741

Lisainfo: "Tootja: BILSTEIN
VW GOLF II/III /SEAT
(kvaliteediklass: Q)"