Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Voltage [V]: 12
- Fitting Position: Front
- Length [mm]: 35.4
- Width [mm]: 47
- Height [mm]: 113.7
- Weight [kg]: 0.088
- Operating Mode: Electric
- Vehicle Equipment: for vehicles without check control system
- Pump Type: Diaphragm Pump
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: CAAE
- Operating Mode: Electric
- Pump Type: Mono Pump
- Number of pins: 2
- Manufacturer: JP GROUP
-
Lisainfo: Washer pump,
headlight cleaning -
Additional information: Washer pump,
headlight cleaning
-
Fitting Position: Left Front,
Right Front - Vehicle Equipment: for vehicles with headlamp cleaning system
- Colour: black
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 15SKV508
- Engine Code: CAAE
- Pump Type: Mono Pump
- Voltage [V]: 12
- Material: Plastic
- Number of pins: 2
-
Name: KLAASIPESUVEE PUMP,
KLAASIPUHASTUS - Manufacturer: MAX
- Voltage [V]: 12
- Operating Mode: Electric
- Number of pins: 2
- Weight [kg]: 0.09
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Connector Shape: oval
- Pump Type: Mono Pump
- Operating Mode: Electric
- Number of pins: 2
- Rated Voltage [V]: 12
-
for OE number: 3B7 955 681,
1 209 387, 955 624 502 00 -
Name: KLAASIPESUVEE PUMP,
TULEPESUR - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: CAAE
- Pump Type: Mono Pump
- Voltage [V]: 12
- Number of connectors: 2
- Material: Plastic
- Weight [kg]: 0.175
- Vehicle Equipment: for vehicles with headlamp cleaning system
-
Name: KLAASIPESUVEE PUMP,
TULEPESUR - Manufacturer: FEB
- Additional information: F26274
- Lisainfo: F26274
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: both sides
-
Mounting Type: Pre-
assembled -
Supplementary Article/Info 2: with integrated washer fluid jet,
with seal ring -
Wash Nozzle Type: Two-
hole Nozzle -
Housing material: Plastic,
POM (Polyoxymethylene) - Housing Colour: black
- Components deviate from OE:
- Consult accessories list for recommended additional repairs:
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Left Front,
Right Front - Vehicle Equipment: for vehicles with headlamp cleaning system
- Colour: black
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Pump Type: Mono Pump
- Pressure [bar]: 2.5
- Flow rate [l/h]: 432
- Voltage [V]: 12
- Operating Mode: Electric
- Weight [kg]: 0.155
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Operating Mode: Electric
- Pump Type: Mono Pump
- Voltage [V]: 12
- Outlet Ø [mm]: 7
- Number of pins: 2
-
Name: KLAASIPESUVEE PUMP,
TULEPESUR - Manufacturer: MEY
- Lisainfo: 3130670001
- Additional information: 3130670001
- Engine Code: CAAE
- Pump Type: Mono Pump
- Voltage [V]: 12
- Number of connectors: 2
- Material: Plastic
- Weight [kg]: 0.175
- Vehicle Equipment: for vehicles with headlamp cleaning system
- Manufacturer: SWAG
- Name: SW 32 92 6274
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Voltage [V]: 12
- Weight [kg]: 0.175
- Number of connectors: 2
- Supplementary Article/Info 2: for headlamp cleaning system
- Pump Type: Mono Pump
- Manufacturer: METALCAUCHO
- Operating Mode: Electric
- Pump Type: Mono Pump
- Plug Type: Blade Terminal
- Fitting Position: Front
- Article number of recommended accessories: 2324118
- Manufacturer: METZGER
- Engine Code: CAAE
- Operating Mode: Electric
- Voltage [V]: 12
- Number of pins: 2
- Pump Type: Mono Pump
- Connector/Clamp: Connector may need adjustment
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Fitting Position: Front,
both sides - Vehicle Equipment: for vehicles with headlamp cleaning system
- Voltage [V]: 12
- Operating Mode: Electric
- Pump Type: Mono Pump
- Plug Type: Blade Terminal
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- General Information: Headlight spray actuator
- Manufacturer: VIKA
- Fitting Position: both sides
-
Name: Pesuveeds,
Tulepesurid - Manufacturer: MD
- Model Year from: 2010
- Fitting Position: both sides
- Weight [kg]: 0.117
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Voltage [V]: 12
- Plug Type ID: 3b
- Pump Type: Mono Pump
- Observe the vehicle manufacturer specifications:
- Always compare old and new part (in particular OE No.):
- Manufacturer: VDO