Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Rear Axle Left,
Rear Axle Right, outer - Inner Diameter [mm]: 27
-
Lisainfo: Grommet for stabilizer,
rear, outer, ®27.0 mm -
Additional information: Grommet for stabilizer,
rear, outer, ®27.0 mm
- Suspension: for vehicles with standard suspension
-
Fitting Position: Rear Axle Left,
Rear Axle Right, inner - Inner Diameter [mm]: 21
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 22
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Fitting Position: Rear Axle,
inner - Material: Rubber
- Thickness [mm]: 42
- Length [mm]: 54
- Width [mm]: 48
- Inner Diameter [mm]: 23
- Outer Diameter [mm]: 48
- Manufacturer: MERTZ
-
Fitting Position: Rear Axle,
outer - Material: Rubber
- Thickness [mm]: 46
- Length [mm]: 43
- Width [mm]: 43
- Inner Diameter [mm]: 21
- Manufacturer: MERTZ
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter [mm]: 23
- Outer Diameter [mm]: 27
- Manufacturer: MERTZ
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 24
- Manufacturer: MERTZ
- Suspension: for vehicles with standard suspension
- Inner Diameter [mm]: 27
-
Fitting Position: inner,
Rear Axle Right, Rear Axle Left - Manufacturer: JP GROUP
-
Lisainfo: Grommet for stabilizer,
rear, inner, ®27.0 mm -
Additional information: Grommet for stabilizer,
rear, inner, ®27.0 mm
- Model Year to: 2006
-
for combined PR number: K4F+0E0,
K4F+0E9 - Fitting Position: Front
- Diameter [mm]: 24
- Weight [kg]: 0.065
- Inner Diameter [mm]: 24
- Packaging length [cm]: 5.1
- Packaging width [cm]: 4.8
- Packaging height [cm]: 4.1
- Manufacturer: FEBEST
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 21
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Fitting Position: Rear Axle
- Material: Rubber
- Thickness [mm]: 50
- Length [mm]: 50
- Width [mm]: 48
- Inner Diameter [mm]: 21
- Outer Diameter [mm]: 47
- Manufacturer: MERTZ
-
Fitting Position: inner,
Front Axle - Inner Diameter [mm]: 24
- Diameter [mm]: 24
- Required quantity: 2
- Mounting Type: Rubber Mount
- Length [mm]: 52
- Weight [kg]: 0.046
-
Name: Paigutus -
Kndmik VW P. T5 03- 24MM - Manufacturer: TED
- Fitting Position: Front Axle
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 21
- SVHC: No SVHC present!
-
Name: Kinnitus,
stabilisaator - Manufacturer: FAG
- Fitting Position: Front Axle
- Inner Diameter [mm]: 21
- Mounting Type: Rubber Mount
- for OE number: 7H0411313
- Manufacturer: DELLO AUTOMEGA
-
Fitting Position: Front Axle,
both sides, Front - Quality: OE Performance
- Material: Rubber
- Colour: black
- Weight [g]: 48
- Inner Diameter [mm]: 21
- Manufacturer: GATES
- Mounting Type: Rubber Mount
-
Fitting Position: Rear Axle,
outer - Required quantity: 2
- Length [mm]: 43
- Weight [kg]: 0.035
- Inner Diameter [mm]: 26
- Manufacturer: TEDGUM
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 24
- Manufacturer: JP GROUP
-
Lisainfo: Grommet for stabilizer,
front, ®24.0 mm -
Additional information: Grommet for stabilizer,
front, ®24.0 mm
- Model Year to: 2005
-
Fitting Position: outer,
Rear Axle - Diameter [mm]: 21
- Weight [kg]: 0.066
- Inner Diameter [mm]: 21
- Packaging length [cm]: 4.7
- Packaging width [cm]: 4.4
- Packaging height [cm]: 4.3
- Manufacturer: FEBEST
for combined PR number: 1BA+K4F, 1BA+K4G, 1BB+K4F, 1BB+K4G, 1BJ+K4F, 1BJ+K4G, 2ML+K4F, 2ML+K4G
- Length [mm]: 50
- Inner Diameter [mm]: 21
- Outer Diameter [mm]: 47
- Material: Rubber
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Thickness [mm]: 50
- Width [mm]: 48
-
Name: Kinnitus,
stabilisaator - Manufacturer: MAX
-
Fitting Position: Rear Axle,
Rear - Quality: OE Performance
- Material: Rubber
- Colour: black
- Weight [g]: 47
- Inner Diameter [mm]: 21
- Manufacturer: GATES
-
Fitting Position: both sides,
Rear - Quality: OE Performance
- Material: Rubber
- Colour: black
- Weight [g]: 41
- Inner Diameter [mm]: 23
- Manufacturer: GATES
-
Fitting Position: Rear Axle,
Rear - Quality: OE Performance
- Material: Rubber
- Colour: black
- Weight [g]: 35
- Inner Diameter [mm]: 27
- Manufacturer: GATES
-
Fitting Position: Front Axle Left,
Front Axle Right - Stabiliser Bar Diameter [mm]: 21
- Observe dimensions:
-
Name: Paigutus -
Kndmik VW P. T5 03- - Manufacturer: MAX
- Inner Diameter [mm]: 21
- Length [mm]: 52
-
Fitting Position: inner,
Front Axle, Rear Axle - Mounting Type: Rubber Mount
- Required quantity: 2
- Weight [kg]: 0.046
-
Name: Paigutus -
Kndmik VW P. T5 03- 22MM - Manufacturer: TED
- Fitting Position: Rear
-
Mounting Type: Rubber-
Metal Mount - Length [mm]: 50
-
Diameter [mm]: 48,
21 - Weight [kg]: 0.05
-
Name: DY 75-
27020 - Manufacturer: DYS
-
Fitting Position: both sides,
Front - Quality: OE Performance
- Material: Rubber
- Colour: black
- Weight [g]: 42
- Inner Diameter [mm]: 24
- Manufacturer: GATES
-
Fitting Position: both sides,
Rear - Quality: OE Performance
- Material: Rubber
- Colour: black
- Weight [g]: 40
- Inner Diameter [mm]: 27
- Manufacturer: GATES
-
Fitting Position: both sides,
Front - Quality: OE Performance
- Material: Rubber
- Colour: black
- Weight [g]: 48
- Inner Diameter [mm]: 22
- Manufacturer: GATES
- Suspension: for vehicles with standard suspension
-
Fitting Position: Rear Axle Left,
Rear Axle Right, inner - Inner Diameter [mm]: 23
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Fitting Position: both sides,
Rear - Quality: OE Performance
- Material: Rubber
- Colour: black
- Weight [g]: 46
- Inner Diameter [mm]: 21
- Manufacturer: GATES
- Fitting Position: Rear Axle both sides
-
Payload [kg]: 3,
200 -
Vehicle Identification Number (VIN) to: 7H-
4H089181, 7H- 5X002613, 7H- 8H033811 - Block Separation:
- Length [mm]: 31
- Inner Diameter [mm]: 16
- Manufacturer: KAVO PARTS
Braking System: for vehicles with brake force regulator, for vehicles without brake force regulator
- Fitting Position: Front Axle
- for OE number: 7H0 411 313
- Manufacturer: GSP AUTOMOTIVE
- Quantity per packing unit: 4
- Fitting Position: Front Axle both sides
- Length [mm]: 52
- Width [mm]: 52
- Weight [kg]: 0.063
- Inner Diameter [mm]: 21
- Outer Diameter [mm]: 49
- Mounting Type: Rubber Mount
- Weight [g]: 62
- Manufacturer: METALCAUCHO
- Fitting Position: Front
- Inner Diameter [mm]: 24
- Observe dimensions:
-
Name: Paigutus -
Kndmik VW P. T5 03- 24MM - Manufacturer: MAX
-
Fitting Position: Rear Axle Left,
Rear Axle Right, inner - Height [mm]: 49.2
- Manufacturer: GSP ZAWIESZENIE
-
Fitting Position: Rear Axle Left,
Rear Axle Right, outer, Lower - Inner Diameter [mm]: 27
- Outer Diameter [mm]: 38
- Length [mm]: 44
- paired article number: 274033
- Weight [kg]: 0.04
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: ABS
- Weight [kg]: 0.045
-
Fitting Position: outer,
Rear Axle - Required quantity: 2
- Diameter [mm]: 23
- Outer Diameter [mm]: 37
- Inner Diameter [mm]: 22
-
Name: Paigutus -
Kndmik VW T. T5 03- - Manufacturer: TED
- Quantity per packing unit: 4
- Fitting Position: Front Axle
- Length [mm]: 54
- Weight [kg]: 0.05
- Inner Diameter [mm]: 23.5
- Outer Diameter [mm]: 48.5
- Mounting Type: Rubber Mount
- Weight [g]: 50
- Manufacturer: METALCAUCHO
- Quantity per packing unit: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 25
- Replace in pairs only:
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle both sides
- Inner Diameter [mm]: 22
- Outer Diameter [mm]: 35
- Length [mm]: 52
- Required quantity: 2
- Name: ALT 93654AL
- Manufacturer: ALTE AUTOMOTIVE
- Quantity per packing unit: 2
-
Fitting Position: Front Axle Left,
Front Axle Right, outer - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 24
- Inner Diameter [mm]: 23
- Quantity per axle: 2
- Replace in pairs only:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Stabiliser Bar Diameter [mm]: 23
- Quantity per packing unit: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Mounting Type: Rubber Mount
- Replace in pairs only:
- Quantity per axle: 2
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Stabiliser Bar Diameter [mm]: 22
-
for PR number: 0WM,
0WN - Quantity per packing unit: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Mounting Type: Rubber Mount
- Replace in pairs only:
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter [mm]: 21
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Fitting Position: Rear
- Inner Diameter [mm]: 23
- General Information: Rubber bush for stabilizer bar; 23mm
- Manufacturer: VIKA
- Fitting Position: Front Axle
- Required quantity: 2
- Inner Diameter [mm]: 24
- Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 25
- Manufacturer: OPTIMAL ZAWIESZENIE
- Fitting Position: Front Axle
- Inner Diameter [mm]: 22
- General Information: Rubber bush for stabilizer bar; 22mm
- Manufacturer: VIKA
- Fitting Position: Rear
- Inner Diameter [mm]: 21
- General Information: Rubber bush for stabilizer bar; 21mm
- Manufacturer: VIKA
- Quantity per packing unit: 2
-
Fitting Position: Front Axle Left,
Front Axle Right, outer - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 28
- Replace in pairs only:
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 23
- General Information: Rubber bush for stabilizer bar; 23mm
- Manufacturer: VIKA
- Quantity per packing unit: 2
-
Fitting Position: Front Axle Left,
Front Axle Right, inner - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 24
- Inner Diameter [mm]: 23
- Quantity per axle: 2
- Replace in pairs only:
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Rear Axle,
inner - Stabiliser Bar Diameter [mm]: 24
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 27
- Outer Diameter [mm]: 47
- Width 1 [mm]: 49
- Width 2 [mm]: 40
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 819023410
- Fitting Position: Front Axle
- for OE number: 7H5 411 313 A
- Manufacturer: GSP ZAWIESZENIE
-
Fitting Position: Rear Axle Left,
Rear Axle Right, outer - Inner Diameter [mm]: 23
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Fitting Position: Front
-
Mounting Type: Rubber-
Metal Mount - Length [mm]: 52
-
Diameter [mm]: 48,
22 - Weight [kg]: 0.05
-
Name: DY 75-
25028 - Manufacturer: DYS
- Quantity per packing unit: 2
-
Fitting Position: Rear Axle both sides,
inner - Material: Sheet Steel
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle both sides
- Width [mm]: 48
- Height 1 [mm]: 42
- Height 2 [mm]: 35
- Inner Diameter [mm]: 22
- Mounting Type: Rubber Mount
- Length [m]: 52
- Manufacturer: OPTIMAL ZAWIESZENIE
- Model Year to: 2005
- Fitting Position: Front Axle
- Diameter [mm]: 22
- Weight [kg]: 0.069
- Inner Diameter [mm]: 22
- Packaging length [cm]: 5.1
- Packaging width [cm]: 4.6
- Packaging height [cm]: 4.2
- Manufacturer: FEBEST
for combined PR number: 1BA+K4F, 1BA+K4G, 1BB+K4F, 1BB+K4G, 1BJ+K4F, 1BJ+K4G, 2ML+K4F, 2ML+K4G
-
for PR number: 2MF,
2MG -
Fitting Position: Rear Axle Right,
outer, Rear Axle Left - Inner Diameter [mm]: 26.5
- Required quantity: 2
-
Name: Paigutus -
Kndmik VW T. TRANSPORTER T5 27MM - Manufacturer: MEY
-
for PR number: 1BA,
1BB, 1BJ -
Fitting Position: Rear Axle Right,
outer, Rear Axle Left - Inner Diameter [mm]: 23
- Required quantity: 2
- Manufacturer: MEY
Name: Paigutus - Kndmik VW TRANSPORTER V (04/03-11/09), TRANSPORTER VI (04/15-?)
- Fitting Position: Front Axle
- Inner Diameter [mm]: 21
- Width [mm]: 42
- Mounting Type: Rubber Mount
- Name: ALT 80876AL
- Manufacturer: ALTE AUTOMOTIVE
- Model Year to: 2005
-
Fitting Position: inner,
Rear Axle - Diameter [mm]: 21
- Weight [kg]: 0.068
- Inner Diameter [mm]: 21
- Packaging length [cm]: 5
- Packaging width [cm]: 4.8
- Packaging height [cm]: 4.2
- Manufacturer: FEBEST
for combined PR number: 1BA+K4F, 1BA+K4G, 1BB+K4F, 1BB+K4G, 1BJ+K4F, 1BJ+K4G, 2ML+K4F, 2ML+K4G
- Inner Diameter [mm]: 27
-
Fitting Position: inner,
Rear Axle - Required quantity: 2
- Length [mm]: 49
- Mounting Type: Rubber Mount
- Weight [kg]: 0.04
- Manufacturer: TEDGUM
- Fitting Position: Front Axle
- Inner Diameter [mm]: 24
- General Information: Rubber bush for stabilizer bar; 24mm
- Manufacturer: VIKA
-
Fitting Position: Front Axle both sides,
Lower - Inner Diameter [mm]: 21
- Length [mm]: 51
- Weight [kg]: 0.05
- Manufacturer: RTS
- Model Year to: 2005
- Fitting Position: Front Axle
- Diameter [mm]: 21
- Weight [kg]: 0.074
- Inner Diameter [mm]: 21
- Packaging length [cm]: 5.2
- Packaging width [cm]: 4.9
- Packaging height [cm]: 4.2
- Manufacturer: FEBEST
for combined PR number: 1BA+K4F, 1BA+K4G, 1BB+K4F, 1BB+K4G, 1BJ+K4F, 1BJ+K4G, 2ML+K4F, 2ML+K4G
-
Fitting Position: Rear Axle,
outer - Stabiliser Bar Diameter [mm]: 22
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 21
- Outer Diameter [mm]: 22
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 819020110
- Fitting Position: Front
- Inner Diameter [mm]: 22
- Observe dimensions:
-
Name: Paigutus -
Kndmik VW P. T5 03- 22MM - Manufacturer: MAX
- Length [mm]: 44
- Width [mm]: 47
- Thickness [mm]: 37
- Inner Diameter [mm]: 27
- Outer Diameter [mm]: 47
- Material: Rubber
- Fitting Position: Rear Axle
- Weight [kg]: 0.3
-
Name: Kinnitus,
stabilisaator - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: BKK
-
Gross vehicle weight [kg]: 3,
200 - for PR number: 0WR
- Block Separation:
- Inner Diameter [mm]: 15.5
- Material: Rubber
- Fitting Position: Rear Axle
- Weight [kg]: 0.03
- Manufacturer: FEBI BILSTEIN
Vehicle Identification Number (VIN) to: ******7H*8H033811, ******7H*4H089181, ******7H*5X002613 Braking System: for vehicles without brake force regulator, for vehicles with brake force regulator General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Material: Rubber
- Thickness [mm]: 49.7
- Length [mm]: 50
- Width [mm]: 48
- Inner Diameter [mm]: 20.9
- Outer Diameter [mm]: 47
- Manufacturer: DENCKERMANN FILTRY
- Fitting Position: Front Axle
- Required quantity: 2
- Weight [g]: 57
- Inner Diameter [mm]: 24
- Name: IM 37641
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
-
Fitting Position: outer,
Rear Axle both sides - Inner Diameter [mm]: 23
- Outer Diameter [mm]: 27
- Manufacturer: FAST
- Fitting Position: Front Axle
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 22
- Width [mm]: 52
- SVHC: No SVHC present!
- Name: LU 819023210
- Manufacturer: FAG
-
Fitting Position: Rear Axle,
outer - Stabiliser Bar Diameter [mm]: 24
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 23
- Outer Diameter [mm]: 24
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 819021210
- Observe dimensions:
-
Fitting Position: Rear Axle Right,
outer, Rear Axle Left - Inner Diameter [mm]: 21
- Required quantity: 2
- Manufacturer: MEY
Name: Paigutus - Kndmik VW T. T5 04/03-11/09, T6 04/15- 21MM
- Quantity per packing unit: 2
-
Fitting Position: Front Axle Left,
Front Axle Right, inner - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 28
- Replace in pairs only:
- Shape: slotted
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Rear Axle,
outer - Stabiliser Bar Diameter [mm]: 24
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 27
- Outer Diameter [mm]: 47
- Width 1 [mm]: 44
- Width 2 [mm]: 33
- SVHC: No SVHC present!
- Manufacturer: FAG
- Fitting Position: Rear Axle both sides
- Inner Diameter [mm]: 21
- Material: Rubber
- Required quantity: 1
- Manufacturer: FAST
- Fitting Position: Front Axle both sides
- Required quantity: 2
- paired article number: VKDS 351018
- Height [mm]: 42
- Inner Diameter [mm]: 21
- Manufacturer: SKF
- Name: SK VKDS351018
- Stabiliser Bar Diameter [mm]: 25
- Quantity per packing unit: 2
- Required quantity: 2
- Inner Diameter [mm]: 24
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
for PR number: 1BA,
1BB, 1BJ -
Fitting Position: inner,
Rear Axle Right, Rear Axle Left - Inner Diameter [mm]: 23
- Required quantity: 2
-
Name: Paigutus -
Kndmik VW T. T5 03- 23MM WEWN. - Manufacturer: MEY
- Length [mm]: 53.5
- Width [mm]: 48
- Thickness [mm]: 41.7
- Inner Diameter [mm]: 23
- Outer Diameter [mm]: 48
- Material: Rubber
-
Fitting Position: Rear Axle,
inner - Weight [kg]: 0.3
-
Name: Kinnitus,
stabilisaator - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: BKK
- Stabiliser Bar Diameter [mm]: 21
- for PR number: 2MD
-
for combined PR number: 0WL+0WM+0WN,
1BA+1BB+1BJ, 0WN+0WN, 1BA+1BB+2ML - Block Separation:
- Width [mm]: 52
- Thickness [mm]: 35
- Inner Diameter [mm]: 21
- Fitting Position: Front Axle
- Weight [kg]: 0.054
-
Name: Paigutus -
Kndmik VW P. T5 03- - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: BKK
- Stabiliser Bar Diameter [mm]: 24
-
for PR number: 1BA,
2MK, 1BB - Block Separation:
- Inner Diameter [mm]: 23
- Outer Diameter [mm]: 27
-
Fitting Position: Rear Axle,
outer - Weight [kg]: 0.054
-
Name: Paigutus -
Kndmik VW T. T5 03- - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle,
inner - Stabiliser Bar Diameter [mm]: 24
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 23
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 819018110
- Stabiliser Bar Diameter [mm]: 22
- Length [mm]: 43
- Width [mm]: 43
- Thickness [mm]: 46
- Inner Diameter [mm]: 21
- Material: Rubber
-
Fitting Position: Rear Axle,
outer - Weight [kg]: 0.04
- Name:
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle,
inner - Stabiliser Bar Diameter [mm]: 22
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 21
- Outer Diameter [mm]: 47
- Width 1 [mm]: 50
- Width 2 [mm]: 40
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 819023510
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 21
- Outer Diameter [mm]: 48
- Width [mm]: 44
- Mounting Type: Rubber Mount
- Name: ALT 86131AL
- Manufacturer: ALTE AUTOMOTIVE
- Inner Diameter [mm]: 23
-
Fitting Position: outer,
Rear Axle Left, Rear Axle Right - Outer Diameter [mm]: 27
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: BKK
- Stabiliser Bar Diameter [mm]: 21
- for PR number: 2MD
-
for combined PR number: 0WL+0WM+0WN,
1BA+1BB+1BJ, 0WN+0WN, 1BA+1BB+2ML - Block Separation:
- Width [mm]: 52
- Thickness [mm]: 35
- Inner Diameter [mm]: 21
- Fitting Position: Front Axle
- Weight [kg]: 0.054
- Name: SW 30 92 6540
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 53.5
- Width [mm]: 47.6
- Thickness [mm]: 41.7
- Inner Diameter [mm]: 23
- Outer Diameter [mm]: 48
- Material: Rubber
-
Fitting Position: Rear Axle,
inner - Weight [kg]: 0.3
- Name: SW 30 10 1931
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: BKK
- Stabiliser Bar Diameter [mm]: 24
-
for PR number: 1BA,
2MK, 1BB - Block Separation:
- Inner Diameter [mm]: 23
- Outer Diameter [mm]: 27
-
Fitting Position: Rear Axle,
outer - Weight [kg]: 0.054
- Name: SW 30 92 6541
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Inner Diameter [mm]: 22
- Outer Diameter [mm]: 35
- Length [mm]: 52
- Required quantity: 1
- Mounting Type: Rubber Mount
- Name: ALT 93654PAAL
- Manufacturer: ALTE AUTOMOTIVE
- Fitting Position: Front
- Quantity per packing unit: 2
- Inner Diameter 1 [mm]: 23
- Thickness 1 [mm]: 49.2
- Name: DE TD2058W
- Manufacturer: DELPHI
- Stabiliser Bar Diameter [mm]: 22
- Length [mm]: 43
- Width [mm]: 43
- Thickness [mm]: 46
- Inner Diameter [mm]: 21
- Material: Rubber
-
Fitting Position: Rear Axle,
outer - Weight [kg]: 0.04
- Name: SW 30 10 0076
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle Left,
Front Axle Right, inner - Inner Diameter [mm]: 23
- Outer Diameter [mm]: 34
- Length [mm]: 52
- paired article number: 271055
- Weight [kg]: 0.05
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: ABS
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 21
- Stabiliser Bar Diameter [mm]: 21
- Required quantity: 2
-
Name: Paigutus -
Kndmik VW P. T5 03- - Manufacturer: MEY
- Stabiliser Bar Diameter [mm]: 23
- Inner Diameter [mm]: 22
- Fitting Position: Front Axle
- Mounting Type: Rubber Mount
- Weight [kg]: 0.05
-
Name: Paigutus -
Kndmik VW P. T5 03- 22MM - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 50
- Width [mm]: 48
- Thickness [mm]: 49.7
- Inner Diameter [mm]: 20.9
- Outer Diameter [mm]: 47
- Material: Rubber
- Fitting Position: Rear Axle
- Weight [kg]: 0.5
- Name:
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle both sides
- Required quantity: 2
- Inner Diameter [mm]: 22
- paired article number: VKDS 351019
- Manufacturer: SKF ZAWIESZENIE
-
Fitting Position: Front Axle Left,
Front Axle Right - Required quantity: 2
- Weight [kg]: 0.075
- Packaging length [cm]: 6
- Packaging width [cm]: 10
- Packaging height [cm]: 6
- Manufacturer: MONROE
- Quantity per packing unit: 2
- Fitting Position: Rear Axle
- Length [mm]: 48
- Weight [kg]: 0.08
- Inner Diameter [mm]: 27
- Outer Diameter [mm]: 46.5
- Mounting Type: Rubber Mount
- Weight [g]: 80
- Manufacturer: METALCAUCHO
- Engine Code: BKK
- Stabiliser Bar Diameter [mm]: 24
-
for PR number: 1BA,
2MK -
Fitting Position: Rear Axle,
outer - Weight [kg]: 0.04
- Inner Diameter [mm]: 23
- Outer Diameter [mm]: 27
- Manufacturer: DENCKERMANN FILTRY
- Fitting Position: Front Axle both sides
- Required quantity: 2
-
Inner Diameter [mm]: 24,
23 - paired article number: VKDS 351020
- Length [mm]: 54
- Height [mm]: 42.5
- Name: SK VKDS351020
- Manufacturer: SKF
- Quantity per packing unit: 2
- Fitting Position: Rear Axle
- Length [mm]: 50
- Weight [kg]: 0.105
- Inner Diameter [mm]: 21
- Outer Diameter [mm]: 42
- Mounting Type: Rubber Mount
- Weight [g]: 105
- Manufacturer: METALCAUCHO
- Observe dimensions:
-
Fitting Position: Rear Axle Right,
inner, Rear Axle Left - Inner Diameter [mm]: 21
- Required quantity: 2
-
Name: Paigutus -
Kndmik VW T. T5 03- - Manufacturer: MEY
- Engine Code: BKK
- Stabiliser Bar Diameter [mm]: 24
-
for PR number: 1BA,
2MK, 1BB - Block Separation:
- Inner Diameter [mm]: 23
- Outer Diameter [mm]: 27
-
Fitting Position: outer,
Rear Axle Left, Rear Axle Right - Observe service information:
-
Name: Kinnitus,
stabilisaator - Manufacturer: MAX
- Stabiliser Bar Diameter [mm]: 23
- Inner Diameter [mm]: 22
- Fitting Position: Front Axle
- Mounting Type: Rubber Mount
- Weight [kg]: 0.05
- Name: SW 30 93 1347
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Stabiliser Bar Diameter [mm]: 28
- Length [mm]: 48
- Width [mm]: 50
- Thickness [mm]: 42
- Inner Diameter [mm]: 27
- Outer Diameter [mm]: 48
- Material: Rubber
-
Fitting Position: Rear Axle,
inner - Weight [kg]: 0.039
-
Name: Kinnitus,
stabilisaator - Manufacturer: FEB
- Quantity per packing unit: 2
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Stabiliser Bar Diameter [mm]: 25
- Inner Diameter [mm]: 24
- Fitting Position: Front Axle
- Weight [kg]: 0.05
-
Name: Paigutus -
Kndmik VW P. T5 03- 24MM - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
for PR number: 1BA,
1BB, 1BJ -
Fitting Position: Front Axle Right,
Front Axle Left - Inner Diameter [mm]: 22
- Required quantity: 2
-
Name: Paigutus -
Kndmik VW P. T5 03- 22MM - Manufacturer: MEY
-
for PR number: 2MF,
2MG -
Fitting Position: inner,
Rear Axle Right, Rear Axle Left - Inner Diameter [mm]: 27
- Required quantity: 2
-
Name: Paigutus -
Kndmik VW T. T5 03- 27MM WEWN. - Manufacturer: MEY
- Lisainfo: 1007150019
- Additional information: 1007150019
-
Fitting Position: Front,
inner, Left, Right, Lower - Stabiliser Bar Diameter [mm]: 24
- Quantity per packing unit: 2
- Inner Diameter 1 [mm]: 24
- Thickness 1 [mm]: 51.5
- Manufacturer: DELPHI ZAWIESZENIE
-
Fitting Position: Right,
Left, Front Axle - Total Length [mm]: 42
- Outer Diameter [mm]: 51
- Inner Diameter [mm]: 22
- Manufacturer: CORTECO
- Name: COC 80005456
- Width [mm]: 105
- Bolt Hole Circle Ø [mm]: 13.5
- Material: Metal
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.19
- Name:
- Manufacturer: FEB
- Quantity per packing unit: 2
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
for PR number: 2MF,
2MG -
Fitting Position: Front Axle Right,
Front Axle Left - Inner Diameter [mm]: 24
- Required quantity: 2
-
Name: Paigutus -
Kndmik VW P. T5 03- 24MM - Manufacturer: MEY
- Lisainfo: 1146150008
- Additional information: 1146150008
-
Fitting Position: Front Axle Left,
Front Axle Right - Required quantity: 2
- Mounting Type: Rubber Mount
- Weight [kg]: 0.06
- Packaging length [cm]: 5.15
- Packaging width [cm]: 4.8
- Packaging height [cm]: 4.2
- Manufacturer: MONROE
- Fitting Position: Front Axle
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 24
- Width [mm]: 52
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 819023110
-
Fitting Position: Rear Axle Left,
Rear Axle Right, outer - Inner Diameter [mm]: 23
- Quantity per axle: 2
- Observe dimensions:
- Manufacturer: LEMFORDER
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front Axle Left,
Front Axle Right, inner - Inner Diameter [mm]: 21
- Outer Diameter [mm]: 35
- Length [mm]: 52
- paired article number: 270649
- Weight [kg]: 0.06
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: ABS
-
Fitting Position: Front Axle Left,
Front Axle Right - Stabiliser Bar Diameter [mm]: 21
- Quantity per axle: 2
- Observe dimensions:
-
Name: Paigutus -
Kndmik VW P. T5 03- 21MM - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
- Stabiliser Bar Diameter [mm]: 25
- Inner Diameter [mm]: 24
- Fitting Position: Front Axle
- Weight [kg]: 0.05
- Name: SW 30 93 1346
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Model Year to: 2005
- Fitting Position: Rear Axle
- Diameter [mm]: 23
- Weight [kg]: 0.239
- Packaging length [cm]: 9
- Packaging width [cm]: 8.3
- Packaging height [cm]: 4.7
- Manufacturer: FEBEST
for combined PR number: 1BA+K4F, 1BA+K4G, 1BB+K4F, 1BB+K4G, 1BJ+K4F, 1BJ+K4G, 2ML+K4F, 2ML+K4G
- Quantity per packing unit: 2
- Fitting Position: Rear Axle
- Weight [kg]: 0.054
- Inner Diameter [mm]: 23
- Mounting Type: Rubber Mount
- Weight [g]: 54
- Manufacturer: METALCAUCHO
-
Fitting Position: Front Axle Left,
Front Axle Right, inner - Inner Diameter [mm]: 22
- Outer Diameter [mm]: 35
- Length [mm]: 52
- paired article number: 271056
- Weight [kg]: 0.05
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: ABS
- Model Year to: 2008
-
for combined PR number: 1BH+K4F,
1BH+K4G - Fitting Position: Rear Axle both sides
- Weight [kg]: 0.203
- Inner Diameter [mm]: 27
- Packaging length [cm]: 8.8
- Packaging width [cm]: 8.2
- Packaging height [cm]: 4.8
- Manufacturer: FEBEST
- Quantity per packing unit: 2
- Fitting Position: Front Axle both sides
- Material: Sheet Steel
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Front Axle Left,
Front Axle Right - Width [mm]: 48
- Height 1 [mm]: 42
- Height 2 [mm]: 35
- Inner Diameter [mm]: 22
- Mounting Type: Rubber Mount
- Quantity Unit: Set
- Length [m]: 52
- Manufacturer: OPTIMAL ZAWIESZENIE
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 22
- Quantity per axle: 2
- Observe dimensions:
-
Name: Paigutus -
Kndmik VW P. T5 03- 22MM - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 24
- Quantity per axle: 2
- Observe dimensions:
-
Name: Kinnitus,
stabilisaator - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
- Inner Diameter 1 [mm]: 21
- Manufacturer: CORTECO
Fitting Position: Front Axle, Right, Left, Front Axle Left, Front Axle Right
-
Fitting Position: Rear Axle Left,
Rear Axle Right, outer - Inner Diameter [mm]: 21
- Quantity per axle: 2
- Observe dimensions:
-
Name: Kinnitus,
stabilisaator - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front,
Left, Right, Lower - Stabiliser Bar Diameter [mm]: 22
- Quantity per packing unit: 2
- Inner Diameter 1 [mm]: 22
- Thickness 1 [mm]: 48.5
- Manufacturer: DELPHI
- Name: DE TD1144W
-
Fitting Position: inner,
Rear Axle, Front Axle -
Material: PU
(Polyurethane) - Colour: red
- Weight [kg]: 0.048
- Length [mm]: 52
- Shore-A hardness value, base body: 80
- Supplementary Article/Info 2: with grease cap
- Required quantity: 2
- Inner Diameter [mm]: 22
- Manufacturer: TED
Name: Paigutus - Kndmik VW P. T5 03- 21MM !!!POLIURETAN!!!
-
Fitting Position: Rear Axle Left,
Rear Axle Right, inner - Inner Diameter [mm]: 27
-
Name: Kinnitus,
stabilisaator - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Rear Axle Left,
Rear Axle Right, inner - Inner Diameter [mm]: 27
- Outer Diameter [mm]: 34
- Length [mm]: 50
- paired article number: 274062
- Weight [kg]: 0.04
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: ABS
-
Fitting Position: Rear,
outer, Left, Right - Stabiliser Bar Diameter [mm]: 23
- Quantity per packing unit: 2
- Inner Diameter 1 [mm]: 23
- Thickness 1 [mm]: 44
- Manufacturer: DELPHI
- Name: DE TD1085W
- Supplementary Article/Info 2: with grease cap
-
Fitting Position: Front Axle,
inner - Length [mm]: 52
- Shore-A hardness value, base body: 80
-
Material: PU
(Polyurethane) - Diameter [mm]: 24
- Required quantity: 2
- Weight [kg]: 0.046
- Colour: red
- Inner Diameter [mm]: 24
- Manufacturer: TED
Name: Paigutus - Kndmik VW P. T5 03- 24MM !!!POLIURETAN!!!
-
Fitting Position: Rear,
outer, Left, Right - Stabiliser Bar Diameter [mm]: 21
- Quantity per packing unit: 2
- Inner Diameter 1 [mm]: 21
- Thickness 1 [mm]: 44
- Manufacturer: DELPHI
- Name: DE TD1084W
-
Fitting Position: Rear Axle Left,
Rear Axle Right, inner - Inner Diameter [mm]: 23
- Quantity per axle: 2
- Observe dimensions:
-
Name: Kinnitus,
stabilisaator - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front
- Quantity per packing unit: 2
- Inner Diameter 1 [mm]: 27
- Thickness 1 [mm]: 44
- Manufacturer: DELPHI ZAWIESZENIE
-
Fitting Position: Rear,
inner, Left, Right, Lower - Stabiliser Bar Diameter [mm]: 21
- Quantity per packing unit: 2
- Inner Diameter 1 [mm]: 21
- Outer Diameter 1 [mm]: 35
- Thickness 1 [mm]: 52.5
- Manufacturer: DELPHI ZAWIESZENIE
- Fitting Position: Front Axle
- Manufacturer: MAGNETI MARELLI
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks