• Fitting Position: Front Axle, Rear Axle
• Manufacturer: JP GROUP A/S
• Lisainfo: PAKENDIS 10 tk, kuvatakse 1tk hind
• Additional information: PAKENDIS 10 tk, kuvatakse 1tk hind

Net weight [kg]: 0.01

• Fitting Position: Front Axle
• Length [mm]: 315
• Thread Size: M10x1
• Manufacturer: JP GROUP
• Lisainfo: Brake hose, 310 mm, front
• Additional information: Brake hose, 310 mm, front

• Fitting Position: Front, Rear
• Material: Metal
• for OE number: 4D0 611 715B, 171611715, 3D0611715B
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle, Rear Axle
• Block Separation:
• Material: Spring Steel
• for OE number: 4D0 611 715B, 955 355 325 00
• Name: KINNITUS,PIDURIVOOLIK
• Manufacturer: HAN
• Lisainfo: 108 718 HP
• Additional information: 108 718 HP

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• Quantity per packing unit: 10
• Material: Spring Steel
• for OE number: 191 611 715
• Name: KINNITUS,PIDURIVOOLIK
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle, Front Axle
• Weight [kg]: 0.009
• Name: KINNITUS,PIDURIVOOLIK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 10
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Quantity per packing unit: 10
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle, Front Axle
• Quantity per packing unit: 25
• Weight [kg]: 0.015
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Length [mm]: 160
• Thread Size: M10x1
• Manufacturer: DELLO AUTOMEGA

• Vehicle configuration line / variant: GT, GTI
• Braking System: for vehicles with disc brakes on the rear axle
• Braking/Drive Dynamics: for vehicles with ABS
• Fitting Position: Rear Axle
• Length [mm]: 160
• Thread Size: M10x1
• Manufacturer: DELLO AUTOMEGA

Left-/right-hand drive vehicles: for right-hand drive vehicles, for left-hand drive vehicles

• Length [mm]: 180
• Thread Size: M10 x 1
• for OE number: 433 611 775 A
• Fitting Position: Rear Axle both sides
• Manufacturer: TRUCKTEC

• Fitting Position: Rear Axle
• Length [mm]: 185
• Internal Thread 1 [mm]: M10x1
• Internal Thread 2 [mm]: M10x1
• Required quantity: 2
• Name: PIDURIVOOLIK
• Manufacturer: MAX

• Fitting Position: Rear Axle Left, Rear Axle Right
• Length [mm]: 160
• Manufacturer: JP GROUP
• Lisainfo: Brake Hose
• Additional information: Brake Hose

• Fitting Position: Rear Axle
• Length [mm]: 183
• Thread Size 1: INN M10x 1.0
• Thread Size 2: INN. M10x1
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• Length [mm]: 183
• Thread Size 1: INN M10x1.0
• Thread Size 2: INN M10x1.0
• Weight [kg]: 0.07
• Manufacturer: A.B.S.

• Braking/Drive Dynamics: for vehicles with ABS
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Fitting Position: Front Axle
• Length [mm]: 335
• Thread Size: M10X1
• Thread Type: with internal thread, with external thread
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear Axle Left, Rear Axle Right
• Internal Thread 1 [mm]: M 10 x 1,0
• Internal Thread 2 [mm]: M 10 x 1,0
• Length [mm]: 164
• Observe system fill quantity:
• Manufacturer: TOPRAN

Material: Rubber with fabric lining, EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Length [mm]: 340
• Thread Size 1: OUT. M10x1
• Thread Size 2: INN. M10x1
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle, Left, Right
• Length [mm]: 160
• Internal Thread [mm]: M10x1
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Braking/Drive Dynamics: for vehicles with ABS
• Fitting Position: Front Axle
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Length [mm]: 350
• Thread Size: M10x1
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle
• Length [mm]: 340
• Internal Thread [mm]: M10x1
• External Thread [mm]: M10x1
• Required quantity: 2
• Name: PIDURIVOOLIK
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Length [mm]: 185
• Net weight [kg]: 0.07
• Name: PIDURIVOOLIK
• Manufacturer: NK

• Fitting Position: Front Axle Left
• Length [mm]: 315
• Thread Size 1: M10x1
• Thread Type: with internal thread, with external thread
• Thread Size 2: M10x1
• Manufacturer: QUICK BRAKE

• Fitting Position: Front Axle
• Length [mm]: 340
• Thread Size 1: OUT M10x1.0
• Thread Size 2: INN M10x1.0
• Weight [kg]: 0.1
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle Left
• Length [mm]: 182
• Thread Size 1: M10x1
• Thread Size 2: M10x1
• Thread Type: with internal thread
• Manufacturer: QUICK BRAKE

• Fitting Position: Rear Axle, Left, Right
• Length [mm]: 185
• Internal Thread [mm]: M10x1
• Guarantee: 3 years guarantee
• Weight [kg]: 0.06
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN PRZEWODY HAMULCOWE

• Fitting Position: Front Axle, Left, Right
• Length [mm]: 340
• Internal Thread [mm]: M10x1
• Guarantee: 3 years guarantee
• Weight [kg]: 0.09
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN PRZEWODY HAMULCOWE

• Fitting Position: Front Axle
• Length [mm]: 340
• Net weight [kg]: 0.09
• Name: PIDURIVOOLIK
• Manufacturer: NK

• Fitting Position: Rear Axle, Left, Right
• Length [mm]: 180, 210
• Thread Size 1: F10X1
• Thread Size 2: F10X1
• Manufacturer: BREMBO
• Name: BR T 85 016

• Fitting Position: Rear Axle
• for OE number: 171 611 775
• Thread Size 1: M10x1 Int SF
• Thread Size 2: M10x1 Int SF
• Length [mm]: 203
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: Brake hose
• Quality class: PJ

Lisainfo: "Tootja: DELPHI
CORRADO (53I), 08.87
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Length [mm]: 160
• Internal Thread 1 [mm]: M10x1
• Internal Thread 2 [mm]: M10x1
• Required quantity: 2
• Name: PIDURIVOOLIK
• Manufacturer: MEY

• Fitting Position: Front Axle
• Overall Length [mm]: 345
• Thread Size 1: F10x1
• Thread Size 2: M10x1
• Name: PIDURIVOOLIK
• Manufacturer: TRI
• Lisainfo: AUDI, VW
• Additional information: AUDI, VW

• Fitting Position: Left, Right, Front Axle
• Length [mm]: 210
• Thread Size 1: F10X1
• Thread Size 2: F10X1
• Manufacturer: BREMBO
• Name: BR T 85 018

• Fitting Position: Rear Axle, Rear
• Required quantity: 2
• Quantity per packing unit: 2
• Internal Thread 2 [mm]: M 10x1
• Length [mm]: 160
• Spanner Size: 14/14
• Internal Thread 1 [mm]: M 10x1
• Weight [kg]: 0.059
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Braking/Drive Dynamics: for vehicles without ABS
• Fitting Position: Front Axle
• Length [mm]: 312
• Manufacturer: CORTECO
• Name: COB 19018186

• Fitting Position: Front Axle
• Length [mm]: 336
• Internal Thread Size: M10 x 1
• External Thread Size: M10 x 1
• Weight [kg]: 0.09
• Observe service information:
• Name: PIDURIVOOLIK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Required quantity: 2
• Length [mm]: 310
• Internal Thread [mm]: M10x1
• External Thread [mm]: M10x1
• Assy./disassy. by qualified personnel required!:
• Name: HE 8AH355460161
• Manufacturer: HELLA PAGID

• Fitting Position: Rear Axle
• Overall Length [mm]: 187
• Thread Size 1: F10x1
• Thread Size 2: F10x1
• Name: PIDURIVOOLIK
• Manufacturer: TRI
• Lisainfo: AUDI, VW
• Additional information: AUDI, VW

• Fitting Position: Rear Axle
• Length [mm]: 180
• Internal Thread Size: M10 x 1
• Weight [kg]: 0.062
• Observe service information:
• Name: PIDURIVOOLIK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 2
• Fitting Position: Rear Axle, both sides
• Braking System: for vehicles with disc brakes on the rear axle
• Quantity per packing unit: 2
• Length [mm]: 185
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Left, Right, Front Axle
• Length [mm]: 340
• Thread Size 1: F10X1
• Thread Size 2: M10X1
• Manufacturer: BREMBO

• Fitting Position: Front Axle
• Length [mm]: 340
• Internal Thread [mm]: M10x1
• External Thread [mm]: M10x1
• Required quantity: 2
• Name: PIDURIVOOLIK
• Manufacturer: MEY

• Brake Type: Drum Brake
• Braking/Drive Dynamics: for vehicles with ABS, for vehicles without ABS
• Fitting Position: Rear Axle
• Length [mm]: 161
• Manufacturer: CORTECO

• Fitting Position: Rear Axle
• Required quantity: 2
• Length [mm]: 160
• Internal Thread [mm]: M10x1
• Assy./disassy. by qualified personnel required!:
• Name: HE 8AH355460081
• Manufacturer: HELLA PAGID

• Fitting Position: Front Axle
• Braking/Drive Dynamics: for vehicles without ABS
• Length [mm]: 310
• External Thread 1 [mm]: M10x1
• Internal Thread 2 [mm]: M10x1
• Manufacturer: BOSCH UK£ADY HAMULCOWE

• Required quantity: 2
• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Length [mm]: 340
• Internal Thread [mm]: M10x1
• External Thread [mm]: M10x1
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Length [mm]: 340
• Manufacturer Restriction: BOSCH
• Thread Size 1: M10x1
• Thread Type: External Thread, Internal Thread
• Thread Size 2: M10x1
• Name: PIDURIVOOLIK
• Manufacturer: TRW
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Length [mm]: 160
• Internal Thread 1 [mm]: M10x1
• Internal Thread 2 [mm]: M10x1
• Manufacturer: BOSCH

Braking System: for vehicles with drum brakes on the rear axle, for vehicles with disc brakes on the front axle

• Fitting Position: Left, Right, Front Axle
• Length [mm]: 360
• Thread Size 1: F10X1
• Thread Size 2: F10X1
• Manufacturer: BREMBO

• Fitting Position: Rear Axle
• Length [mm]: 180
• Internal Thread 1 [mm]: M10x1
• Internal Thread 2 [mm]: M10x1
• Manufacturer: BOSCH UK£ADY HAMULCOWE

• Fitting Position: Front Axle
• for OE number: 171 611 701L
• Manufacturer Restriction: Lucas
• Thread Size 1: M10x1 Int SF
• Thread Size 2: M10x1
• Length [mm]: 314
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: Brake hose
• Quality class: PJ

Lisainfo: "Tootja: DELPHI
GOLF I (17), 04.74-1
(kvaliteediklass: PJ)" Additional information: "Tootja: DELPHI
GOLF I (17), 04.74-1
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Length [mm]: 185
• Thread Size 1: M10x1
• Thread Type: Internal Thread
• Name: PIDURIVOOLIK
• Manufacturer: TRW
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Braking System: for vehicles with disc brakes on the rear axle
• Length [mm]: 160
• External Thread 1 [mm]: M10x1
• Internal Thread 2 [mm]: M10x1
• Manufacturer: BOSCH UK£ADY HAMULCOWE

• Required quantity: 2
• Fitting Position: Front Axle
• Length [mm]: 315
• External Thread [mm]: M10x1
• Internal Thread [mm]: M10x1
• MAPP code available:
• Spanner Size 1 [mm]: 14
• Name: Pidurivoolik
• Manufacturer: ATE

• Fitting Position: Front Axle, Left, Right, Rear Axle
• Quantity per packing unit: 2
• Internal Thread [mm]: M10x1
• Overall Length [mm]: 340.5
• External Thread [mm]: M10x1
• Spanner Size: 14
• Length [mm]: 315
• Weight [kg]: 0.128
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Required quantity: 2
• Fitting Position: Rear Axle
• Length [mm]: 164
• Internal Thread 1 [mm]: M10x1
• Internal Thread 2 [mm]: M10x1
• MAPP code available:
• Spanner Size 1 [mm]: 14
• Name: Pidurivoolik
• Manufacturer: ATE