Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Inner Diameter [mm]: 50
- Thickness [mm]: 4
-
Material: NBR
(nitrile butadiene rubber) - Manufacturer: METZGER
- Quantity per packing unit: 25
- Thickness [mm]: 3.65
- Weight [kg]: 0.001
- Inner Diameter [mm]: 19.6
- Manufacturer: METALCAUCHO
- Cooling Hose: from connecting pipe to carburettor
- Manufacturer: JP GROUP
-
Lisainfo: Radiator hose,
intake manifold to carburetor -
Additional information: Radiator hose,
intake manifold to carburetor
- Cooling Hose: from water pipe to water pump
- Fitting Position: Lower
- Manufacturer: DELLO AUTOMEGA
- Cooling Hose: from connecting pipe to carburettor
- Fitting Position: Upper
- Manufacturer: DELLO AUTOMEGA
- Cooling Hose: from engine to water pipe
-
Lisainfo: Radiator hose,
engine block to water pipe -
Additional information: Radiator hose,
engine block to water pipe
- Material: Rubber with fabric lining
- Cooling Hose: from water pipe to water pump
- Observe system fill quantity:
- Hose Type: Moulded Hose
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Cooling Hose: from waterpump to connecting pipe
- Weight [kg]: 0.042
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Material: Rubber with fabric lining
- for OE number: 037 121 057
- Observe system fill quantity:
- Hose Type: Moulded Hose
- Name: JAHUTUSVOOLIK
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Material: Rubber
- General Information: coolant hose; rubber
- Manufacturer: VIKA
- Material: Rubber with fabric lining
- Cooling Hose: from water pipe to water pump
- Name: JAHUTUSVOOLIK
- Manufacturer: MAX
- Cooling Hose: from connecting pipe to carburettor
- Manufacturer: JP GROUP
-
Lisainfo: Radiator hose,
connecting pipe to carburetor -
Additional information: Radiator hose,
connecting pipe to carburetor
- Construction Year to: 12.1989
- Cooling Hose: from heat exchanger to engine
- Forward- /Backflow: for backflow
- Manufacturer: DELLO AUTOMEGA
- Material: Rubber with fabric lining
- for OE number: 026 121 056G
- Observe system fill quantity:
- Hose Type: Moulded Hose
- Name: JAHUTUSVOOLIK
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Length [mm]: 113
- Inner Diameter [mm]: 18
- Cooling Hose: from water pump to water pipe
- Weight [kg]: 0.06
- Guarantee: 3 years guarantee
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 24SKV365
- Construction Year to: 07.1989
- Cooling Hose: from expansion tank to water pipe
- Fitting Position: Upper
- Manufacturer: DELLO AUTOMEGA
- Forward- /Backflow: for backflow
-
Lisainfo: Radiator hose,
return, heat exchanger to engine -
Additional information: Radiator hose,
return, heat exchanger to engine
-
Vehicle Identification Number (VIN) to: 1G-
N- 300 000 - Cooling Hose: from thermostat to waterpump
- Manufacturer: DELLO AUTOMEGA
- for OE number: 068121063M
- Weight [g]: 51
- Cooling Hose: from water pump to water pipe
- Length [mm]: 118
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 21
- Name: IM 220733
- Manufacturer: ORIGINAL IMPERIUM
- Material: Rubber with fabric lining
- Cooling Hose: from engine to water pump
- Observe system fill quantity:
- Hose Type: Moulded Hose
- Name: JAHUTUSVOOLIK
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Vehicle Equipment: for vehicles with air conditioning
- Cooling Hose: from engine cooler to water pump
- Fitting Position: Lower Right
- Manufacturer: DELLO AUTOMEGA
- Cooling Hose: from engine to water pump
-
Lisainfo: Radiator hose,
water pump to engine -
Additional information: Radiator hose,
water pump to engine
- Quantity: 1
- General Information: coolant hose
- Manufacturer: VIKA
- Weight [kg]: 0.16
- Guarantee: 3 years guarantee
- Always compare old and new part (in particular OE No.):
- Name: CE 24SKV376
- Manufacturer: ESEN SKV
- Inner Diameter [mm]: 18
- Cooling Hose: from water pump to water pipe
- Hose Length [mm]: 113
- Weight [kg]: 0.041
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Rubber with fabric lining
- Cooling Hose: from engine cooler to water pump
- Fitting Position: Lower
- Observe system fill quantity:
- Hose Type: Moulded Hose
- Name: JAHUTUSVOOLIK
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Vehicle Equipment: for vehicles with air conditioning
- Cooling Hose: from engine cooler to water pump
- Fitting Position: Lower
- Observe system fill quantity:
- Hose Type: Moulded Hose
- Name: JAHUTUSVOOLIK
- Manufacturer: HAN
Material: Rubber with fabric lining, EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Cooling Hose: from engine cooler to water pump
- Manufacturer: JP GROUP
-
Lisainfo: Radiator hose,
lower, radiator to water pump -
Additional information: Radiator hose,
lower, radiator to water pump
- Vehicle Equipment: for vehicles with air conditioning
- Cooling Hose: from engine to engine cooler
- Fitting Position: Upper
- Manufacturer: DELLO AUTOMEGA
- Inner Diameter 1 [mm]: 19
- Inner Diameter 2 [mm]: 24
- Weight [kg]: 0.24
- Colour: black
- Guarantee: 3 years guarantee
- Hose Length [mm]: 516
-
Suitable for vehicle type: PC
(passenger car) - Always compare old and new part (in particular OE No.):
- Name: CE 24SKV370
- Manufacturer: ESEN SKV
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Fitting Position: Lower
- Vehicle Equipment: for vehicles without air conditioning
-
not for country specific design: Sweden,
Switzerland - Fuel Mixture Formation: Carburettor
- Colour: black
- Hose Length [mm]: 220
- Inner Diameter 1 [mm]: 32
- Inner Diameter 2 [mm]: 32
- Observe broschure:
- Manufacturer: GATES PASKI PRZEWODY
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Inner Diameter 1 [mm]: 25
- Inner Diameter 2 [mm]: 24
- Weight [kg]: 0.22
- Colour: black
- Guarantee: 3 years guarantee
- Hose Length [mm]: 350
-
Suitable for vehicle type: PC
(passenger car) - Always compare old and new part (in particular OE No.):
- Name: CE 24SKV368
- Manufacturer: ESEN SKV
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material: Rubber with fabric lining
- Cooling Hose: from engine to water pump
- Name: JAHUTUSVOOLIK
- Manufacturer: MAX
- Construction Year to: 07.1987
- Fitting Position: Lower
- Vehicle Equipment: for vehicles without air conditioning
-
Country Specific Design: Sweden,
Switzerland - Fuel Mixture Formation: Carburettor
- Colour: black
- Hose Length [mm]: 285
- Inner Diameter 1 [mm]: 31
- Inner Diameter 2 [mm]: 35
- Observe broschure:
- Name: Jahutusvoolik
- Manufacturer: GAT
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Cooling Hose: from engine to water pipe
- Supplementary Article/Info 2: without clamps
- Name: JAHUTUSVOOLIK
- Manufacturer: MEY
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Quantity: 1
- Cooling Hose: from engine cooler to water pump
- Material: Rubber with fabric lining
- Fitting Position: Lower
- General Information: coolant hose
- Manufacturer: VIKA
- Quantity: 1
- Cooling Hose: from engine cooler to water pump
- Material: Rubber with fabric lining
- Surface: Rubberized
- Fitting Position: Lower
- General Information: coolant hose; rubber
- Manufacturer: VIKA
- Material: Rubber
- Weight [g]: 109
- Length [mm]: 331
- Name: IM 220726
- Manufacturer: ORIGINAL IMPERIUM
Cooling Hose: from expansion tank to ventilation pipe, from expansion tank to engine cooler
- Material: Rubber with fabric lining
- Cooling Hose: from engine to engine cooler
- Fitting Position: Upper
- for OE number: 191 121 101S
- Observe system fill quantity:
- Hose Type: Moulded Hose
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Quantity: 1
- Cooling Hose: from engine to engine cooler
- Material: Rubber with fabric lining
- Fitting Position: Upper
- General Information: coolant hose
- Manufacturer: VIKA
- for OE number: 027121056A
- Material: Rubber
- Weight [g]: 49
- Length [mm]: 219
- Name: Jahutusvoolik
- Manufacturer: IMP
- Weight [kg]: 0.28
- Guarantee: 3 years guarantee
- Always compare old and new part (in particular OE No.):
- Name: CE 24SKV393
- Manufacturer: ESEN SKV
- Vehicle Equipment: for vehicles with air conditioning
- Cooling Hose: from engine to engine cooler
-
Lisainfo: Radiator hose,
upper, radiator to engine -
Additional information: Radiator hose,
upper, radiator to engine
- Cooling Hose: from radiator to water pipe
- Manufacturer: JP GROUP
-
Lisainfo: Radiator hose,
upper, radiator to water pipe -
Additional information: Radiator hose,
upper, radiator to water pipe
- Quantity: 1
- Cooling Hose: from engine to engine cooler
- Material: Rubber with fabric lining
- Surface: Rubberized
- Fitting Position: Upper
- General Information: coolant hose; rubber
- Manufacturer: VIKA
- Cooling Hose: from connecting pipe to engine cooler
- Name: Jahutusvoolik
- Manufacturer: MAX
- Vehicle Equipment: for vehicles with air conditioning
- Material: Rubber with fabric lining
- Cooling Hose: from engine to engine cooler
- Fitting Position: Upper
- for OE number: 191 121 101Q
- Observe system fill quantity:
- Hose Type: Moulded Hose
- Name: JAHUTUSVOOLIK
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Cooling Hose: from engine cooler to expansion tank
- Supplementary Article/Info 2: without clamps
- Name: JAHUTUSVOOLIK
- Manufacturer: MEY
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Fitting Position: Lower
- Vehicle Equipment: for vehicles with air conditioning
- Cooling Hose: from engine cooler to water pump
- Weight [kg]: 0.178
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 026121053G
- Weight [g]: 171
- Length [mm]: 320
- Inner Diameter 1 [mm]: 25
- Inner Diameter 2 [mm]: 24
- Name: IM 220635
- Manufacturer: ORIGINAL IMPERIUM
Cooling Hose: from coolant regulator housing to auxiliary water pump, from thermostat to waterpump
- Vehicle Equipment: for vehicles without air conditioning
-
not for country specific design: Sweden,
Switzerland - Fuel Mixture Formation: Carburettor
- Fitting Position: Lower
- Cooling Hose: from engine cooler to water pump
- Weight [kg]: 0.16
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Upper
- Vehicle Equipment: for vehicles without air conditioning
- Colour: black
- Hose Length [mm]: 385
- Inner Diameter 1 [mm]: 30.5
- Inner Diameter 2 [mm]: 30.5
- Observe broschure:
- Name: Jahutusvoolik
- Manufacturer: GAT
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- for OE number: 191121051E
- Weight [g]: 176
- Length [mm]: 279
- Inner Diameter 1 [mm]: 31
- Inner Diameter 2 [mm]: 35
- Name: Jahutusvoolik
- Manufacturer: IMP
- Cooling Hose: from heat exchanger to engine
- for OE number: 191819373
- Weight [g]: 135
- Length [mm]: 287
- Inner Diameter 1 [mm]: 19
- Inner Diameter 2 [mm]: 19
- Name: Jahutusvoolik
- Manufacturer: IMP
- Fitting Position: Upper
- Vehicle Equipment: for vehicles with air conditioning
- Colour: black
- Hose Length [mm]: 500
- Inner Diameter 1 [mm]: 31
- Inner Diameter 2 [mm]: 31
- Observe broschure:
- Name: Jahutusvoolik
- Manufacturer: GAT
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Cooling Hose: from engine to water pump
- Supplementary Article/Info 2: without clamps
- Name: JAHUTUSVOOLIK
- Manufacturer: MEY
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Cooling Hose: from connecting pipe to engine cooler
- Supplementary Article/Info 2: without clamps
- Name: JAHUTUSVOOLIK
- Manufacturer: MEY
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Vehicle Equipment: for vehicles with air conditioning
- Cooling Hose: from heat exchanger to engine
- for OE number: 191121051P
- Fitting Position: Lower Right
- Weight [g]: 288
- Length [mm]: 258
- Inner Diameter 1 [mm]: 32
- Inner Diameter 2 [mm]: 32
- Name: IM 220645
- Manufacturer: ORIGINAL IMPERIUM
-
Vehicle Identification Number (VIN) to: 1G-
N- 300 000 - Manufacturer: DELLO AUTOMEGA
- Cooling Hose: from engine to engine cooler
- for OE number: 3293561
- Fitting Position: Upper Right
- Weight [g]: 270
- Length [mm]: 366
- Name: Jahutusvoolik
- Manufacturer: IMP
- Vehicle Equipment: for vehicles with air conditioning
- Fitting Position: Lower
- Supplementary Article/Info 2: without clamps
- Name: JAHUTUSVOOLIK
- Manufacturer: MEY
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Construction Year from: 01.1989
-
Vehicle Identification Number (VIN) from: ..-
L- 000 001 - Cooling Hose: from expansion tank to water pipe
- Supplementary Article/Info 2: without clamps
- Name: JAHUTUSVOOLIK
- Manufacturer: MEY
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Fitting Position: Upper
- Cooling Hose: from radiator to water pipe
- Supplementary Article/Info 2: without clamps
- Name: JAHUTUSVOOLIK
- Manufacturer: MEY
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material: Metal
- Manufacturer: JP GROUP
- Lisainfo: Water pipe
- Additional information: Water pipe
- Cooling Hose: from heat exchanger to engine
- Material: Steel Pipe
- Consult accessories list for recommended additional repairs:
- Name: JAHUTUSVEDELIKU TORUSTIK
- Manufacturer: HAN
- Lisainfo: 100 258 HP
- Additional information: 100 258 HP
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Upper
- Vehicle Equipment: for vehicles with air conditioning
- Supplementary Article/Info 2: without clamps
- Name: JAHUTUSVOOLIK
- Manufacturer: MEY
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material: Steel Pipe
-
Name: OHUTUSVOOLIK,
PAISUPAAK - Manufacturer: MAX
- Material: Metal
- Number of connectors: 4
- Manufacturer: 3RG
-
Vehicle Identification Number (VIN) from: 19-
E- 300 001 -
Vehicle Identification Number (VIN) to: 1G-
N- 300 000 - Shape: Bent
- Weight [kg]: 0.441
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Weight [kg]: 0.52
- Number of Holes: 3
- Weight [g]: 520
- Number of mounting bores: 2
- Manufacturer: METALCAUCHO