Articles

Filter results
Brand
Fitting Position

Product

Description

In stock

Price

(incl. VAT)

02943
Gasket, intermediate shaft
FEBI BILSTEIN
  • Engine Code: AFT, AEK
  • Inner Diameter [mm]: 52
  • Outer Diameter [mm]: 56
  • Colour: green
  • Material: FPM (fluoride rubber)
  • Fitting Position: frontal sided
  • Weight [kg]: 0.002
  • Name: RONGASTIHEND
  • Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Orderable
2
1.68
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Tellitav
14
1.93
Kaup on euroopa kesklaos. Tellimuse saadame 17.00
Ord. 1 b-day
1
2.16
Kaup on euroopa kesklaos. Tellimus tööpäeviti enne 17.00
Ord. 1 b-day
10
2.25
Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimused hiljemalt 17.00
Additional information OE codes Linked vehicles
12012709B
Shaft Seal, countershaft
CORTECO
  • Engine Code: AEK, AFT, AKS
  • Fitting Position: frontal sided
  • Material: FPM (fluoride rubber)
  • Inner Diameter 1 [mm]: 32
  • Outer Diameter 1 [mm]: 47
  • Height 1 [mm]: 10
  • Swirl Type: Alternating Twist
  • Dust Cover: with dust lip
  • for OE number: 026103085D
  • Name: VOLLI RONGASTIHEND, NUKKVOLL
  • Manufacturer: COT
  • Additional information: 12012709
  • Lisainfo: 12012709
In Tallinn
0
3.10
 
Tellitav 1 tp
10
2.50
Kaup on euroopa kesklaos. Tarne 2 tööpäeva LakiAuto lattu. Tellimus läheb 17.00 Saabub meie lattu alates 15.00
Orderable
19
2.75
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Ord. 1 b-day
16
2.89
Kaup on euroopa kesklaos. Tellimus tööpäeviti kuni 16.30
Ord. 1 b-day
10
3.10
Kaup on euroopa kesklaos. Tellimus tööpäeviti enne 17.00
Tellitav
26
3.20
Kaup on euroopa kesklaos. Tellimuse saadame 17.00
Ord. 1 b-day
10
3.26
Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimused hiljemalt 17.00
Additional information OE codes Linked vehicles
51335
Shaft Seal, intermediate shaft
AIC
  • Required quantity: 1
  • Fitting Position: frontal sided
  • Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

Orderable
20
2.56
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Additional information OE codes Linked vehicles
325.155
Shaft Seal, intermediate shaft
ELRING
  • Inner Diameter [mm]: 32
  • Outer Diameter [mm]: 47
  • Height [mm]: 10
  • Radial Shaft Seal Design: ASW
  • Swirl Type: Alternating Twist
  • Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
  • Dust Cover: with dust lip
  • Alternative Repair Kit: 325.156
  • Manufacturer: ELRING
  • Lisainfo: 325.155 ELR
  • Additional information: 325.155 ELR
In Tallinn
0
2.79
 
Kaup on euroopa kesklaos. Tellimus tööpäeviti kuni 16.30
Ord. 1 b-day
74
2.79
Kaup on euroopa kesklaos. Tellimus tööpäeviti kuni 16.30
Orderable
50
2.87
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Ord. 1 b-day
10
3.28
Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimused hiljemalt 17.00
Tellitav
26
3.28
Kaup on euroopa kesklaos. Tellimuse saadame 17.00
Additional information OE codes Linked vehicles
V10-3256
Shaft Seal, countershaft
VAICO
  • Thickness [mm]: 10
  • for OE number: 068 103 085 E
  • Fitting Position: frontal sided
  • Inner Diameter [mm]: 32
  • Outer Diameter [mm]: 47
  • Weight [kg]: 0.023
  • Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Orderable
9
2.92
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Additional information OE codes Linked vehicles
15010800
Shaft Seal, intermediate shaft
AJUSA
  • Inner Diameter [mm]: 32
  • Outer Diameter [mm]: 47
  • Height [mm]: 10
  • Swirl Type: Alternating Twist
  • Name: VOLLI RONGASTIHEND, NUKKVOLL
  • Manufacturer: AJU
Tellitav
26
2.94
Kaup on euroopa kesklaos. Tellimuse saadame 17.00
Ord. 1 b-day
1
9.54
Kaup on euroopa kesklaos. Tellimus tööpäeviti enne 17.00
Additional information OE codes Linked vehicles
325.156
Shaft Seal, intermediate shaft
ELRING
  • Inner Diameter [mm]: 32
  • Outer Diameter [mm]: 47
  • Height [mm]: 10
  • Radial Shaft Seal Design: ASW
  • Swirl Type: Alternating Twist
  • Material: FPM (fluoride rubber)
  • Dust Cover: with dust lip
  • Alternative Repair Kit: 325.155
  • Manufacturer: ELRING
Orderable
17
3.86
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Ord. 1 b-day
7
4.06
Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimused hiljemalt 17.00
Additional information OE codes Linked vehicles
85958694
Bearing, balance shaft
KOLBENSCHMIDT
  • Engine Code: AFT
  • for shaft diameter from [mm]: 41.959
  • to shaft diameter [mm]: 41.975
  • for housing diameter from [mm]: 45
  • to housing diameter [mm]: 45.025
  • Repair stage: SEMI
  • Width 1 [mm]: 15
  • General Information: Bushing for intermediary shaft, rear.
  • Name: LAAGER, BALANSIIRVOLL
  • Manufacturer: KS
Ord. 1 b-day
10
6.34
Kaup on euroopa kesklaos. Tellimus tööpäeviti enne 17.00
Additional information OE codes Linked vehicles
V10-3274
Shaft Seal, countershaft
VAICO
  • Outer Diameter [mm]: 47
  • Thickness [mm]: 10
  • Inner Diameter [mm]: 32
  • Fitting Position: transmission sided
  • Weight [kg]: 0.195
  • Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Orderable
1
23.04
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Tellitav
7
26.55
Kaup on euroopa kesklaos. Tellimuse saadame 17.00
Additional information OE codes Linked vehicles