• for PR number: 1BA, 1BE
• Block Separation:
• Spring Type: for vehicles without air suspension
• Bellows Material: Thermoplast
• Height [mm]: 210
• Manufacturer: TOPRAN

Fitting Position: Rear Axle Left, Rear Axle Right, Front Axle Left, Front Axle Right General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Block Separation:
• Spring Type: for vehicles with air suspension
• Bellows Material: Thermoplast
• Height [mm]: 210
• Manufacturer: TOPRAN

Fitting Position: Front Axle Left, Front Axle Right, Rear Axle Left, Rear Axle Right General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for PR number: 1BA
• Shock Absorber Mounting Type: Bottom eye
• Manufacturer: FEBEST

• Suspension: for vehicles without electronic suspension control
• for PR number: 1BA, 1BE
• Block Separation:
• Thickness [mm]: 210
• Material: Thermoplast
• Fitting Position: Front Axle, Rear Axle
• Weight [kg]: 0.09
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear
• Observe technical data:
• Manufacturer Restriction: VAG
• Cable Length [mm]: 200
• Number of pins: 6
• Socket Width [mm]: 1.6
• Cable Cross Section [mm²]: 0.75
• Supplementary Article/Info 2: with plug
• Supplementary Article/Supplementary Info: with gaskets/seals
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, rattap””rete andur
• Manufacturer: HBE

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Bore Diameter [mm]: 35
• Length 1 [mm]: 392
• Length 2 [mm]: 540
• Piston Rod Diameter [mm]: 15.8
• Packaging length [cm]: 56.8
• Packaging width [cm]: 17.2
• Name: CFD 564212
• Manufacturer: DACO

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Manufacturer: KAVO

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Name: AMORTYZATOR VW T. TOUAREG/CAYENNE
• Manufacturer: MAX

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• paired article number: 32349472
• Manufacturer: GSP AMORTYZATOR

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• paired article number: 32349471
• Manufacturer: GSP AMORTYZATOR

• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Packaging length [cm]: 71.5
• Packaging width [cm]: 22
• Name: CFD 453928L
• Manufacturer: DACO

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Packaging length [cm]: 71.5
• Packaging width [cm]: 22
• Name: CFD 453928R
• Manufacturer: DACO

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• General Information: Rear shock absorber; gas
• Manufacturer: VIKA

• Suspension: for vehicles with standard suspension
• for PR number: 1BA
• Quantity per packing unit: 2
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Quantity per axle: 1
• Manufacturer: TRW AMORTYZATORY
• Additional information: TRWJGS1084T
• Lisainfo: TRWJGS1084T

SVHC: No information available, please contact the manufacturer!

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• paired article number: ssa-10562
• Manufacturer: KAVO PARTS

• Spring Type: for vehicles without air suspension
• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• paired article number: 11-0636
• Name: Amort
• Manufacturer: MAX

• Spring Type: for vehicles without air suspension
• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• paired article number: 11-0635
• Name: Amort
• Manufacturer: MAX

• Suspension: for vehicles without sports suspension
• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Bottom Fork, Top pin
• Manufacturer: KAMOKA AMORTYZATORY

• Suspension: for vehicles without sports suspension
• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Bottom Fork, Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: KAMOKA AMORTYZATORY

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Article number of recommended accessories: 100 740 0023, 100 641 0012
• Replace in pairs only:
• Name: AMORT
• Manufacturer: MEY

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• General Information: Front shock absorber; right; gas
• Manufacturer: VIKA

• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• Article number of recommended accessories: 100 640 0023, 100 641 0012
• Replace in pairs only:
• paired article number: 126 625 0007
• Name: AMORT
• Manufacturer: MEY

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• Article number of recommended accessories: 100 640 0023, 100 641 0012
• Replace in pairs only:
• paired article number: 126 625 0006
• Name: AMORT
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SEXOV32/15X157A
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Name: AMORT
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle Left
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• Name: AMORT
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle Right
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• Name: AMORT
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Suspension: for vehicles without sports suspension
• Spring Type: for vehicles with air suspension
• Quantity per packing unit: 2
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Length 1 [mm]: 392
• Length 2 [mm]: 540
• Bore Diameter [mm]: 35
• Piston Rod Diameter [mm]: 15.8
• Article number of recommended accessories: MK341
• Weight [kg]: 3.5
• Packaging length [cm]: 54.3
• Packaging width [cm]: 21.7
• Packaging height [cm]: 12.5
• Manufacturer: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Fitting Position: Rear Axle
• Suspension: for vehicles without sports suspension
• Spring Type: for vehicles with air suspension
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Length 1 [mm]: 392
• Length 2 [mm]: 540
• Bore Diameter [mm]: 35
• Piston Rod Diameter [mm]: 15.8
• Weight [kg]: 3.5
• Packaging length [cm]: 56.8
• Packaging width [cm]: 17.2
• Packaging height [cm]: 17.2
• Manufacturer: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Spring Type: for vehicles without air suspension
• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• paired article number: 19-194462
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 19-194479
• Lisainfo: 19-194479
• Additional information: 19-194479

• Fitting Position: Front Axle Right
• Suspension: for vehicles without sports suspension
• Spring Type: for vehicles with air suspension
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• paired article number: D0304L
• Article number of recommended accessories: MK341, PK329
• Weight [kg]: 4.9
• Packaging length [cm]: 71.5
• Packaging width [cm]: 22
• Packaging height [cm]: 21.9
• Manufacturer: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Fitting Position: Front Axle Left
• Suspension: for vehicles without sports suspension
• Spring Type: for vehicles with air suspension
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• paired article number: D0303R
• Article number of recommended accessories: MK341, PK329
• Weight [kg]: 4.9
• Packaging length [cm]: 71.5
• Packaging width [cm]: 22
• Packaging height [cm]: 21.9
• Manufacturer: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Spring Type: for vehicles without air suspension
• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: Gas shock absorber
• Quality class: Q

Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Construction Year to: 12.2009
• Vehicle Identification Number (VIN) to: 7L-9-045000
• Spring Type: for vehicles without air suspension
• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• paired article number: 35-110552
• Shock Absorber System: Single Tube Upside Down
• Name: BI 35-110569
• Manufacturer: BILSTEIN

Lisainfo: "Tootja: BILSTEIN
VW TOUAREG (7LA)
(kvaliteediklass: Q)"

• Construction Year to: 12.2009
• Vehicle Identification Number (VIN) to: 7L-9-045000
• Spring Type: for vehicles without air suspension
• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• paired article number: 35-110569
• Shock Absorber System: Single Tube Upside Down
• Name: BI 35-110552
• Manufacturer: BILSTEIN
• Quality class: Q

Additional information: "Tootja: BILSTEIN
VW TOUAREG (7LA)
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
VW TOUAREG (7LA)
(kvaliteediklass: Q)"

• Spring Type: for vehicles with air suspension
• Suspension: for vehicles with electronic suspension control
• Check OE number:
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: TT36/18X167ED
• Shock Absorber Design: Suspension Strut
• Fitting Position: Rear Axle Left
• paired article number: 319 024
• Shock Absorber Mounting Type: Top pin
• Manufacturer: SACHS AMORTYZATORY

SVHC: No information available, please contact the manufacturer!

• Spring Type: for vehicles with air suspension
• Suspension: for vehicles with electronic suspension control
• Check OE number:
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: TT36/18X167ED
• Shock Absorber Design: Suspension Strut
• Fitting Position: Rear Axle Right
• paired article number: 319 023
• Shock Absorber Mounting Type: Top pin
• Manufacturer: SACHS AMORTYZATORY

SVHC: No information available, please contact the manufacturer!

• Spring Type: for vehicles with air suspension
• Suspension: for vehicles with electronic suspension control
• Check OE number:
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: TT36/18X127ED
• Shock Absorber Design: Suspension Strut
• Fitting Position: Front Axle Left
• paired article number: 319 022
• Shock Absorber Mounting Type: Top pin
• Manufacturer: SACHS AMORTYZATORY

SVHC: No information available, please contact the manufacturer!