• External Thread [mm]: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 510
• Oxygen Sensor: Planar Sensor
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• External Thread [mm]: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 620
• Oxygen Sensor: Heated
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• External Thread [mm]: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 480
• Oxygen Sensor: Planar Sensor
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Number of pins: 2
• Connector Shape: D Shape
• Socket colour: dark grey
• Fitted Diameter [mm]: 25
• Sensor Type: NTC Sensor
• Fitting Depth [mm]: 20
• for OE number: 06A919501A
• Manufacturer: MEAT&DORIA

• Engine Code: BJN
• Colour: grey
• Block Separation:
• Colour Coding: grey
• for article number: 1.660.015K, 1.830.278K, 1.879.946
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS
• Additional information: 1-830-278
• Lisainfo: 1-830-278

• Engine Code: BJN
• Colour: grey
• Block Separation:
• Colour Coding: grey
• for article number: 26.0015K, 7.3278K, 7.7946
• Manufacturer: FACET

• Mounting Type: Plugged
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour: black
• Sensor Type: NTC Sensor
• Number of pins: 2
• Supplementary Article/Info 2: with retaining ring
• Corresponds to the original part in colour: black, grey
• Fitting Depth [mm]: 20
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: NTC Sensor
• Voltage [V]: 12
• Length [mm]: 20
• Colour Coding: grey
• Manufacturer: MAGNETI MARELLI
• Name: MM SPA111

• General Information: Boost pressure sensor
• Manufacturer: VIKA

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.03
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV237

• Number of pins: 3
• Connector Shape: oval
• General Information: Camshaft position sensor
• Manufacturer: VIKA

• Diameter [mm]: 26
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Spring Design: Retaining Spring
• Length [mm]: 20
• Housing Colour: blue
• Height [mm]: 57
• Colour: grey
• Number of connectors: 2
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV489
• Manufacturer: ESEN SKV

• Height [mm]: 22.5
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Manufacturer Restriction: VAG
• Number of pins: 3
• Cable Length [mm]: 200
• Socket Width [mm]: 1.5
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Contact surface: gold-plated
• Cable Cross Section [mm²]: 0.75
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, rattap””rete andur
• Manufacturer: HBE

• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• General Information: Camshaft position sensor
• Manufacturer: VIKA

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• General Information: Camshaft position sensor
• Manufacturer: VIKA

• Fitting Position: before catalytic converter
• Observe technical data:
• Manufacturer Restriction: VAG
• Number of pins: 6
• Cable Length [mm]: 250
• Cable Cross Section [mm²]: 1
• Socket Width [mm]: 2.8
• Contact surface: Tin-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, tagatuli
• Manufacturer: HBE

• Transmission Type: 6-Speed Manual Transmission
• Transmission ID: GXB
• Length [mm]: 62
• Width [mm]: 23
• for OE number: 036 907 601 E
• Height [mm]: 45
• Required quantity: 1
• Colour: black
• Operating Mode: Electric
• Sensor Type: Active sensor, Hall Sensor
• Number of pins: 3
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: with seal ring, without cable
• Housing Colour: black
• Connector Shape: D Shape
• Manufacturer: VIEROL

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: 6-Speed Manual Transmission
• Transmission ID: GXB
• Number of connectors: 3
• Weight [kg]: 0.035
• for OE number: 036 907 601 E
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• Construction Year from: 06.2005
• Oxygen Sensor: Diagnostic Probe, Heated
• Fitting Position: Left, Rear, after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 750
• Name: Lambda andur
• Manufacturer: MAX

• Transmission Type: 6-Speed Manual Transmission
• Transmission ID: GXB
• Number of connectors: 3
• Weight [kg]: 0.035
• for OE number: 036 907 601 E
• Name: SW 30 93 7510
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Fitting Depth [mm]: 22.6
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Takistus [oom]: 9
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV909
• Manufacturer: ESEN SKV

• Number of pins: 3
• Fitting Depth [mm]: 24
• Housing Colour: black
• Weight [kg]: 0.035
• Manufacturer: ERA

• Oxygen Sensor: Diagnostic Probe, Finger-type Sensor
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

Fitting Position: Left, Rear, Front, Right, after catalytic converter

Manufacturer: DELLO AUTOMEGA

• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 5
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.29
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Engine Code: BJN, CFRA
• for model code: 7LA/7L6
• Oxygen Sensor: Diagnostic Probe
• Length [mm]: 940
• Number of connectors: 4
• Manufacturer: VERNET

Fitting Position: for cylinder 7, for cylinder 8, for cylinder 9, Right Front

• Engine Code: BJN
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Length [mm]: 721
• Conductor Number: 4
• Number of circuits: 4
• Resistor [Ohm]: 9
• Cable Length [mm]: 721
• Oxygen Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Pinge [V]: 12
• Pistikkontaktide arv: 5
• Garantii: 3 aastat garantii
• Uus osa:
• Vana detaili tagastus mittevajalik:
• Kaal (kg): 0,07
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV504

• Fitting Position: Left, Rear
• Construction Year to: 05.2005
• Engine Code: BJN
• Oxygen Sensor: Unheated
• Number of pins: 4
• Cable Length [mm]: 630
• Quality: OE EQUIVALENT
• for OE number: 06A906262AS
• Manufacturer: MEAT&DORIA

• Conductor Number: 4
• Resistor [Ohm]: 9
• Length [mm]: 721
• Number of circuits: 4
• Cable Length [mm]: 721
• Oxygen Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Oxygen Sensor: Diagnostic Probe, Unheated
• Fitting Position: Right Front
• Number of pins: 4
• Cable Length [mm]: 1,050
• Quality: OE EQUIVALENT
• for OE number: 058906265B
• Manufacturer: MEAT&DORIA

• Oxygen Sensor: Diagnostic Probe, Planar Sensor, Heated
• Engine Code: BJN, CFRA
• for model code: 7LA/7L6
• Cable Length [mm]: 740
• Name: LAMBDA ANDUR
• Manufacturer: DLP

Fitting Position: Right Front, for cylinder 7, for cylinder 8, for cylinder 9, for cylinder 10, for cylinder 11, for cylinder 12, after catalytic converter

• Length [mm]: 50
• Number of connectors: 3
• Weight [kg]: 0.025
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Left Rear
• Construction Year to: 05.2005
• Engine Code: BJN
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Oxygen Sensor: Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: after catalytic converter, Left, Rear, Front, Right

• Lambda andur: soojendatud
• Pistikkontaktide arv: 4
• Kaablipikkus (mm): 620
• Kvaliteet: OE EQUIVALENT
• OE-numbri jaoks: 1K0998262S
• Manufacturer: MEAT&DORIA

• Lambda andur: Bistabiilne andur
• Kaablipikkus (mm): 290
• valikuliselt:
• Ülekandeliinide arv: 4
• alternatiivne remondikomplekt: 570112
• Manufacturer: ERA

• Construction Year from: 06.2005
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, Left, Front
• Number of circuits: 4
• Overall Length [mm]: 1,320
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH

• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Manufacturer: FAE

• Engine Code: BJN
• Fitting Position: before catalytic converter
• Cable Length [mm]: 250
• Conductor Number: 4
• Number of circuits: 4
• Name: EP 1.998.235
• Manufacturer: EPS

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased

• Oxygen Sensor: Heated
• Number of pins: 4
• Cable Length [mm]: 1,160
• Quality: OE EQUIVALENT
• for OE number: 0258006986
• Manufacturer: MEAT&DORIA

• Engine Code: BJN
• Fitting Position: before catalytic converter
• Cable Length [mm]: 250
• Conductor Number: 4
• Number of circuits: 4
• Manufacturer: FACET

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased

• Engine Code: BJN
• Construction Year to: 05.2005
• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Sensor
• Length [mm]: 780
• Number of pins: 5
• Lisainfo: Lambda Sensor
• Additional information: Lambda Sensor

• Engine Code: BJN
• Cable Length [mm]: 1,300
• Conductor Number: 4
• Supplementary Article/Info 2: with fastening material
• Oxygen Sensor: Heated, Planar Sensor, Thread pre-greased
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: EP 1.998.245
• Manufacturer: EPS

• Fitting Position: Right, Front, Left
• Construction Year to: 05.2005
• Engine Code: BJN
• Line insulation design: with silicone-coated woven-fibre insulation
• Overall Length [mm]: 1,800
• Number of pins: 4
• Recommended change interval [km]: 160,000
• Oxygen Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Housing Type: without housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: DE AF10385-12B1
• Manufacturer: DELPHI

• Oxygen Sensor: Switching-type Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.2
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV423

• Construction Year from: 06.2005
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, Left, Rear
• Number of circuits: 4
• Overall Length [mm]: 750
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: BJN
• for model code: 7LA
• Construction Year to: 05.2005
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, Left, Front, Right
• Block Separation:
• Number of circuits: 4
• Overall Length [mm]: 1,720
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Name: OHUMASSIMOOTJA
• Manufacturer: MAG

• Number of pins: 5
• for OE number: 07D906461X
• Manufacturer: MEAT&DORIA

• Housing Type: with housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: DLP

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Length [mm]: 800
• Number of pins: 6
• for article number: 77030
• Manufacturer: FAE
• Additional information: 75357 FAE
• Lisainfo: 75357 FAE

• Construction Year from: 06.2005
• Oxygen Sensor: Regulating Sensor, Heated
• Resistor [Ohm]: 4.9
• Conductor Number: 5
• Number of circuits: 5
• Length [mm]: 800
• Cable Length [mm]: 800
• Manufacturer: MAGNETI MARELLI

• Required quantity: 2
• Voltage [V]: 12
• Number of pins: 5
• Manufacturer: BREMI

• Oxygen Sensor: Heated
• General Information: Lambda sensor; 5 wire
• Manufacturer: VIKA

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Värv: punane
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 5
• Kaal (kg): 0,15
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Construction Year from: 06.2005
• Oxygen Sensor: Regulating Sensor, Broadband Oxygen Sensor, Heated
• Engine Code: BJN, CFRA
• for model code: 7LA/7L6
• Cable Length [mm]: 331
• Name: DE ES21069-12B1
• Manufacturer: DELPHI

Fitting Position: Right Front, for cylinder 7, for cylinder 8, for cylinder 9, before catalytic converter

• Oxygen Sensor: Heated, Regulating Sensor
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 6
• Cable Length [mm]: 907
• Weight [kg]: 0.13
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 06.2005
• Oxygen Sensor: Regulating Sensor, Broadband Oxygen Sensor, Heated
• for model code: 7LA/7L6
• Engine Code: BJN, CFRA
• Cable Length [mm]: 615
• Name: DE ES21368-12B1
• Manufacturer: DELPHI

Fitting Position: Right Front, for cylinder 7, for cylinder 8, for cylinder 9, before catalytic converter

• Engine Code: BJN
• Fitting Position: after catalytic converter, Left Rear
• Oxygen Sensor: Heated
• Voltage [V]: 12
• Conductor Number: 4
• Cable Length [mm]: 700
• Manufacturer: PIERBURG

• Engine Code: BJN, CFRA
• Block Separation:
• Vehicle Identification Number (VIN) from: 7L6***
• Oxygen Sensor: Heated
• Conductor Number: 5
• Cable Length [mm]: 740
• Fitting Position: before catalytic converter
• Manufacturer: PIERBURG

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Sensor, Heated
• Model Year from: 2005
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 6
• Cable Length [mm]: 805
• Weight [kg]: 0.121
• Name: SW 33 10 4126
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Left
• Vehicle Identification Number (VIN) to: 5-090 000
• Engine Code: BJN
• Oxygen Sensor: Unheated
• Number of pins: 5
• Cable Length [mm]: 600
• Quality: OE EQUIVALENT
• for OE number: 06A906262AE
• Manufacturer: MEAT&DORIA

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Length [mm]: 800
• Number of pins: 6
• Socket colour: black
• for article number: 77030
• Manufacturer: FAE

• Oxygen Sensor: Heated, Regulating Sensor
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 6
• Cable Length [mm]: 907
• Weight [kg]: 0.13
• Name: SW 33 10 4124
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.