Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)





















































- Model Year from: 2003
- Model Year to: 2005
- Weight [kg]: 0.013
- Packaging length [cm]: 4
- Packaging width [cm]: 2
- Packaging height [cm]: 1.5
- Manufacturer: FEBEST




- Fitting Position: Rear Axle
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Supplementary Article/Info 2: with retaining ring
- Valve type: Pressure Limiting Valve
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.




- Valve type: Multiport Valve
- New part without deposit:
- Used part return not required:
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.


- Valve type: Control Valve
- General Information: valve unit
- Manufacturer: VIKA



- Spring Type: for vehicles with air suspension
- Valve type: Solenoid Valve
-
Name: Klapp,
suruohuseade - Manufacturer: JPA






-
Fabrication Number: EZC-
PS- 016 - Fitting Position: Front Axle Right
-
paired article number: EZC-
PS- 015 - Manufacturer: NTY






-
Fabrication Number: EZC-
PS- 015 - Fitting Position: Front Axle Left
-
paired article number: EZC-
PS- 016 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.



- Fitting Position: Front Axle Right
-
paired article number: 131-
02- 203 - New part without deposit:
- Used part return not required:
- Assy./disassy. by qualified personnel required!:
-
Name: AB 131-
02- 204 - Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.



- Fitting Position: Front Axle Left
-
paired article number: 131-
02- 204 - New part without deposit:
- Used part return not required:
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
-
Name: AB 131-
02- 203
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.






-
Fabrication Number: EZC-
PS- 017 - Fitting Position: Rear Axle both sides
- Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.



-
Fitting Position: Rear Axle Left,
Rear Axle Right - New part without deposit:
- Used part return not required:
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
-
Name: AB 131-
02- 116
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.


- Valve type: Control Valve
- for OE number: 95535890300
-
Name: Klapp,
suruohuseade - Manufacturer: MD


- for OE number: 7L8 616 403 B
- Fitting Position: Front Axle Left
- Manufacturer: TRUCKTEC



- for OE number: 7L8 616 503 B
- Fitting Position: Rear Axle both sides
-
Name: Ohkvedru,
vedrustus - Manufacturer: MAX


- Valve type: Control Valve
- for OE number: 97035815302
-
Name: Klapp,
suruohuseade - Manufacturer: MD




- Fitting Position: Front Axle Left
- Guarantee: 3 years guarantee
- paired article number: 58SKV037
- Weight [kg]: 4.6
- Always compare old and new part (in particular OE No.):
- Name: CE 58SKV036
- Manufacturer: ESEN SKV





- Fitting Position: Rear Axle
- Manufacturer: KAMOKA


- Valve type: Solenoid Valve
- Spring Type: for vehicles with air suspension
- Supplementary Article/Supplementary Info: without holder
- for OE number: 7L0 698 014
- Width [mm]: 82
- Height [mm]: 142
- Length [mm]: 88
- paired article number: at10278
- Guarantee: 3 years guarantee
- Number of connectors: 6
- See accessories list for additionally required parts:
-
Article number of recommended accessories: at14319,
at14320, at14171, at14172 - Article number of the recommended special tool: at14132
- Version: IAM
- Manufacturer: AT AUTOTEILE GERMANY
General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.




- Fitting Position: Rear Axle
- Guarantee: 3 years guarantee
- Weight [kg]: 4
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 58SKV035


- Spring Type: for vehicles with air suspension
- Suspension: for vehicles with electronic suspension control
- Fitting Position: Front Axle Left
- Spring Design: Air Spring
- Manufacturer: DENCKERMANN FILTRY


- Spring Type: for vehicles with air suspension
- Suspension: for vehicles with electronic suspension control
- Fitting Position: Front Axle Right
- Spring Design: Air Spring
- Manufacturer: DENCKERMANN FILTRY










- Spring Type: for vehicles with air suspension
-
Supplementary Article/Info 2: with dryer,
without clip - Guarantee: 3 years guarantee
- Always compare old and new part (in particular OE No.):
- Weight [kg]: 5





- Fitting Position: Left Front
-
Shock Absorber Mounting Type: Top yoke,
Bottom Yoke - Spring Type: for vehicles with air suspension
- Manufacturer: KAMOKA





- Fitting Position: Right Front
-
Shock Absorber Mounting Type: Top yoke,
Bottom Yoke - Spring Type: for vehicles with air suspension
- Manufacturer: KAMOKA




- Suspension: for vehicles with electronic suspension control
- Spring Type: for vehicles with air suspension
- Fitting Position: Front Axle Left
-
paired article number: MA-
AS052 -
Manufacturer: ASHIKA-
AMORTYZATORY


- Fitting Position: Front Axle Left
- paired article number: 35200131
- Manufacturer: GSP


- Fitting Position: Front Axle Right
- paired article number: 35200132
- Manufacturer: GSP




- Suspension: for vehicles with electronic suspension control
- Spring Type: for vehicles with air suspension
- Fitting Position: Front Axle Left
- paired article number: MJAS052
- Manufacturer: JAPKO




- Suspension: for vehicles with electronic suspension control
- Spring Type: for vehicles with air suspension
- Fitting Position: Front Axle Right
- paired article number: MJAS053
- Manufacturer: JAPKO




- Fitting Position: Front Axle Right
- Guarantee: 3 years guarantee
- paired article number: 58SKV036
- Weight [kg]: 4.4
- Always compare old and new part (in particular OE No.):
- Manufacturer: ESEN SKV



- Spring Type: for vehicles with air suspension
-
Name: Kompressor,
suruohussteem - Manufacturer: MAX
-
Lisainfo: 27-
5004 -
Additional information: 27-
5004













































































- Valve type: Solenoid Valve
- Spring Type: for vehicles with air suspension
- Packaging length [cm]: 11.5
- Packaging width [cm]: 9.5
- Packaging height [cm]: 8
- Weight [kg]: 0.8
- Net weight [kg]: 0.7
- Manufactured in: China
- Manufacturer: ARNOTT




- Suspension: for vehicles with electronic suspension control
- Spring Type: for vehicles with air suspension
- Fitting Position: Front Axle Left
-
paired article number: MM-
AS052 -
Name: Loots,
ohkvedrustus - Manufacturer: JPA




- Suspension: for vehicles with electronic suspension control
- Spring Type: for vehicles with air suspension
- Fitting Position: Front Axle Right
-
paired article number: MM-
AS053 -
Name: Loots,
ohkvedrustus - Manufacturer: JPA



- Spring Type: for vehicles with air suspension
- Manufacturer: DENCKERMANN FILTRY




- Suspension: for vehicles with electronic suspension control
- Spring Type: for vehicles with air suspension
- Fitting Position: Rear Axle
-
Name: Loots,
ohkvedrustus - Manufacturer: JPA






- Spring Type: for vehicles with air suspension
- Supplementary Article/Info 2: with dryer
-
Supplementary Article/Supplementary Info: Relay replacement necessary,
with relay - Manufacturer: KAMOKA










- Spring Type: for vehicles with air suspension
- Supplementary Article/Info 2: with dryer
- Guarantee: 3 years guarantee
- Always compare old and new part (in particular OE No.):
- Weight [kg]: 5.8
- Manufacturer: SKV GERMANY
- Name: CE 58SKV516










- Spring Type: for vehicles with air suspension
- Supplementary Article/Info 2: with dryer
- Guarantee: 3 years guarantee
- Always compare old and new part (in particular OE No.):
- Weight [kg]: 5.8
- Name: CE 58SKV520
- Manufacturer: ESEN SKV





- Valve type: Solenoid Valve
- Spring Type: for vehicles with air suspension
- Packaging length [cm]: 16
- Packaging width [cm]: 9.5
- Packaging height [cm]: 9
- Weight [kg]: 0.7
- Net weight [kg]: 0.6
- Manufactured in: Germany
- Manufacturer: ARNOTT


- Voltage [V]: 12
- Spring Type: for vehicles with air suspension
- for OE number: 4L0698007B
-
Name: Kompressor,
suruohussteem - Manufacturer: MD


- General Information: air compressor
- Manufacturer: VIKA



- Spring Type: for vehicles with air suspension
- Supplementary Article/Info 2: with dryer
- Manufacturer: JPA
Name: KOMPRESOR ZAWIESZENIA PNEUMATYCZNEGO AUDI Q7 3,0-6,0 06-15/PORSCHE CAYENNE 3,0-4,8 02-10/VW TOUAREG 2,5-6,0 02-10


- replacement in pairs recommended:
-
Supplementary Article/Supplementary Info: with valve,
Incl. Gasket Set - Fitting Position: Front Axle Left
- paired article number: at10496
- Spring Type: for vehicles with air suspension
- Width [mm]: 180
- Length [mm]: 450
- Guarantee: 3 years guarantee
- See accessories list for additionally required parts:
-
Article number of recommended accessories: at14319,
at14320, at14171, at14172 - Article number of the recommended special tool: at14132
- Manufacturer: AT AUTOTEILE GERMANY
General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.




- Valve type: Multiport Valve
- Number of connectors: 6
- for OE number: A212 320 03 58
- Width [mm]: 117
- Height [mm]: 85
- Length [mm]: 131
- paired article number: at11338
- Guarantee: 3 years guarantee
- See accessories list for additionally required parts:
-
Article number of recommended accessories: at14319,
at14320, at14171, at14172 - Article number of the recommended special tool: at14132
-
Version: OEM -
Quality - Line - Manufacturer: AT AUTOTEILE GERMANY
General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.








-
Fitting Position: Front Axle,
Right - Guarantee: 3 years guarantee
- New Part:
- paired article number: 58SKV703
- Weight [kg]: 12.2
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 58SKV704








-
Fitting Position: Front Axle,
Left - Guarantee: 3 years guarantee
- New Part:
- paired article number: 58SKV704
- Weight [kg]: 12
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY













































































- Fitting Position: Rear
- Spring Type: for vehicles with air suspension
-
Shock Absorber Mounting Type: Top yoke,
Bottom Yoke - replacement in pairs recommended:
- Manufactured in: The Netherlands
- Packaging length [cm]: 38
- Packaging width [cm]: 18.5
- Packaging height [cm]: 18.5
- Weight [kg]: 4.1
- Net weight [kg]: 3.5
- Manufacturer: ARNOTT
Lisainfo: 02-10 VW, 06-15 Audi, 02-10 Porsche SUVs vasak või parem Additional information: 02-10 VW, 06-15 Audi, 02-10 Porsche SUVs vasak või parem




- Spring Type: for vehicles with air suspension
- Suspension: for vehicles with electronic suspension control
- Fitting Position: Front Axle Left
- Shock Absorber Type: Gas Pressure
- Shock Absorber Mounting Type: Bottom Fork
-
paired article number: MA-
AS013 - Manufacturer: ASHIKA



- Spring Type: for vehicles with air suspension
- Fitting Position: Rear Axle Left
- Shock Absorber Type: Gas Pressure
- Shock Absorber Mounting Type: Bottom eye
-
paired article number: 11-
0789 - Name: Ohuamort
- Manufacturer: MAX































































- Valve type: Multiport Valve
- Number of pins: 10
- Number of connectors: 6
- Supplementary Article/Info 2: with retaining ring
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.




- Spring Type: for vehicles with air suspension
- Suspension: for vehicles with electronic suspension control
- Fitting Position: Front Axle Left
- Shock Absorber Type: Gas Pressure
- Shock Absorber Mounting Type: Bottom Fork
- paired article number: MJAS013
- Manufacturer: JAPKO





- Spring Type: for vehicles with air suspension
- Suspension: for vehicles with electronic suspension control
- Fitting Position: Front Axle Right
- Shock Absorber Type: Gas Pressure
- Shock Absorber Mounting Type: Bottom Fork
- paired article number: MJAS012
- Manufacturer: JAPKO



- Manufacturer: WAB
Name: KOMPRESOR ZAWIESZENIA PNEUMATYCZNEGO AUDI Q7 05- NOWY Z KAUCJ¤ !
Price of the deposit will be added in the sum of 77.26€
















































































- Fitting Position: Right Front
- Spring Type: for vehicles with air suspension
-
Shock Absorber Mounting Type: Top yoke,
Bottom Yoke - replacement in pairs recommended:
-
paired article number: A-
2572 - Manufactured in: USA
- Packaging length [cm]: 38.5
- Packaging width [cm]: 18.5
- Packaging height [cm]: 18.5
- Weight [kg]: 4.7
- Net weight [kg]: 4
- Manufacturer: ARNOTT
-
Lisainfo: 02-
10 VW, 06- 15 Audi, 02- 10 Porsche SUVs -
Additional information: 02-
10 VW, 06- 15 Audi, 02- 10 Porsche SUVs















































































- Fitting Position: Left Front
- Spring Type: for vehicles with air suspension
-
Shock Absorber Mounting Type: Top yoke,
Bottom Yoke - replacement in pairs recommended:
-
paired article number: A-
2571 - Manufactured in: USA
- Packaging length [cm]: 39.5
- Packaging width [cm]: 18.5
- Packaging height [cm]: 19
- Weight [kg]: 4.6
- Net weight [kg]: 3.9
-
Lisainfo: 02-
10 VW, 06- 15 Audi, 02- 10 Porsche SUVs -
Additional information: 02-
10 VW, 06- 15 Audi, 02- 10 Porsche SUVs



- Spring Type: for vehicles with air suspension
- Fitting Position: Rear Axle Right
- Shock Absorber Type: Gas Pressure
- Shock Absorber Mounting Type: Bottom eye
-
paired article number: 11-
0790 - Name: Ohuamort
- Manufacturer: MAX


-
Supplementary Article/Supplementary Info: with valve,
Incl. Gasket Set - replacement in pairs recommended:
- Fitting Position: Front Axle Right
- paired article number: at10497
- Spring Type: for vehicles with air suspension
- Width [mm]: 180
- Length [mm]: 450
- Guarantee: 3 years guarantee
- See accessories list for additionally required parts:
-
Article number of recommended accessories: at14319,
at14320, at14171, at14172 - Article number of the recommended special tool: at14132
- Manufacturer: AT AUTOTEILE GERMANY
General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.


-
Supplementary Article/Info 2: with dryer,
with integrated relay - Spring Type: for vehicles with air suspension
- for OE number: 7L0 698 007 A
- Supplementary Article/Supplementary Info: Relay replacement necessary
- Guarantee: 3 years guarantee
- Voltage [V]: 12
- See accessories list for additionally required parts:
-
Article number of recommended accessories: at14319,
at14320, at14171, at14172 - Article number of the recommended special tool: at14132
- Manufacturer: AT AUTOTEILE GERMANY
General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.









- Fitting Position: Front Axle Right
- Manufacturer: METALCAUCHO





- Spring Type: for vehicles with air suspension
- Suspension: for vehicles with electronic suspension control
- Fitting Position: Front Axle Right
- Shock Absorber Type: Gas Pressure
- Shock Absorber Mounting Type: Bottom Fork
-
paired article number: MM-
AS012 - Name: Ohuamort
- Manufacturer: JPA


- Fitting Position: Front Axle Right
- paired article number: 30900132
- Manufacturer: GSP




- Spring Type: for vehicles with air suspension
- Suspension: for vehicles with electronic suspension control
- Fitting Position: Front Axle Left
- Shock Absorber Type: Gas Pressure
- Shock Absorber Mounting Type: Bottom Fork
-
paired article number: MM-
AS013 - Name: Ohuamort
- Manufacturer: JPA





- Fitting Position: Front Axle Left
- Manufacturer: KAMOKA





- Fitting Position: Front Axle Right
- Manufacturer: KAMOKA



- Fitting Position: Rear Axle Right
- Manufacturer: METALCAUCHO


- Spring Type: for vehicles with air suspension
- Suspension: for vehicles with electronic suspension control
- Fitting Position: Rear Axle Left
- Shock Absorber Type: Gas Pressure
- Shock Absorber Mounting Type: Bottom eye
- Manufacturer: DENCKERMANN AMORTYZATORY


- Spring Type: for vehicles with air suspension
- Suspension: for vehicles with electronic suspension control
- Fitting Position: Rear Axle Right
- Shock Absorber Type: Gas Pressure
- Shock Absorber Mounting Type: Bottom eye
- Manufacturer: DENCKERMANN AMORTYZATORY




- Spring Type: for vehicles with air suspension
- Suspension: for vehicles with electronic suspension control
- Fitting Position: Rear Axle Left
- paired article number: MJAS050
- Manufacturer: JAPKO




- Suspension: for vehicles with electronic suspension control
- Spring Type: for vehicles with air suspension
- Fitting Position: Rear Axle Right
-
paired article number: MM-
AS051 - Name: Ohuamort
- Manufacturer: JPA




- Spring Type: for vehicles with air suspension
- Suspension: for vehicles with electronic suspension control
- Fitting Position: Rear Axle Left
-
paired article number: MM-
AS050 - Name: Ohuamort
- Manufacturer: JPA





- Spring Type: for vehicles with air suspension
-
Supplementary Article/Supplementary Info: Relay replacement necessary,
with relay - Supplementary Article/Info 2: with dryer
- Manufactured in: China
- Overheating protection: Yes
- Packaging length [cm]: 38.1
- Packaging width [cm]: 16.5
- Weight [kg]: 5.4
- Packaging height [cm]: 28.9
- Net weight [kg]: 4.8
- Manufacturer: ARNOTT
Vehicle Equipment: for vehicles without optional tyre inflation connector













































































- Spring Type: for vehicles with air suspension
-
Supplementary Article/Supplementary Info: Relay replacement necessary,
with relay - Supplementary Article/Info 2: with dryer
- Manufactured in: Germany
- Packaging length [cm]: 30
- Packaging width [cm]: 19
- Weight [kg]: 4.8
- Packaging height [cm]: 22
- Net weight [kg]: 4.5
- Manufacturer: ARNOTT
-
Lisainfo: 02-
10 VW, 06- 15 Audi, 02- 10 Porsche SUVs -
Additional information: 02-
10 VW, 06- 15 Audi, 02- 10 Porsche SUVs





- Fitting Position: Left Front
- Spring Type: for vehicles with air suspension
-
Shock Absorber Mounting Type: Top yoke,
Bottom Fork - replacement in pairs recommended:
-
paired article number: AS-
3164 - Manufactured in: USA
- Packaging length [cm]: 78
- Packaging height [cm]: 25
- Packaging width [cm]: 41
- Weight [kg]: 11.5
- Net weight [kg]: 9.8
- Manufacturer: ARNOTT





- Fitting Position: Right Front
- Spring Type: for vehicles with air suspension
-
Shock Absorber Mounting Type: Top yoke,
Bottom Fork - replacement in pairs recommended:
-
paired article number: AS-
3165 - Manufactured in: USA
- Packaging length [cm]: 78
- Packaging height [cm]: 25
- Packaging width [cm]: 41
- Weight [kg]: 11.5
- Net weight [kg]: 9.8
- Manufacturer: ARNOTT