• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Oxygen Sensor: Switching-type Oxygen Sensor, Thread pre-greased
• Fabrication Number: ESL-UV-001
• Manufacturer: NTY
• Name: NTY ESL-UV-001

• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Thread Size: M18x1.5
• Cable Length [mm]: 570
• Number of pins: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-AU-016
• Manufacturer: NTY

• Oxygen Sensor: Diagnostic Probe, Switching-type Oxygen Sensor
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Oxygen Sensor: Diagnostic Probe
• Fabrication Number: ESL-SK-004
• Cable Length [mm]: 545
• Manufacturer: NTY

• Oxygen Sensor: Diagnostic Probe, Switching-type Oxygen Sensor
• Cable Length [mm]: 260
• Guarantee: 3 years guarantee
• Weight [kg]: 0.11
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV134
• Manufacturer: ESEN SKV

Fitting Position: after catalytic converter, before catalytic converter

• Oxygen Sensor: Switching-type Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.12
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Engine Code: BZG
• Construction Year to: 04.2009
• Oxygen Sensor: Regulating Sensor, Heated
• Number of circuits: 4
• Length [mm]: 481
• Name: Lambda andur
• Manufacturer: MAX

• Fitting Position: Front, before catalytic converter
• Oxygen Sensor: Regulating Sensor, Heated
• Length [mm]: 480
• Number of circuits: 4
• Name: Lambda andur
• Manufacturer: MAX

• Fitting Position: Front
• Oxygen Sensor: Diagnostic Probe
• Number of connectors: 4
• Length [mm]: 250
• Manufacturer: VERNET

• Oxygen Sensor: Regulating Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.13
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Oxygen Sensor: Switching-type Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.12
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV121

• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0119
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Finger-type Sensor, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)"

• Oxygen Sensor: Regulating Sensor, Finger-type Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Oxygen Sensor: Heated, Diagnostic Probe
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 250
• Weight [kg]: 0.086
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Heated, Diagnostic Probe
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 250
• Weight [kg]: 0.086
• Name: SW 33 10 3194
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Resistor [Ohm]: 6
• Conductor Number: 4
• Length [mm]: 260
• Number of circuits: 4
• Cable Length [mm]: 260
• Oxygen Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 95
• Gross Weight [g]: 139
• Manufacturer: DENSO
• Name: DN DOX-0121
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Finger-type Sensor, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
MONDEO I SEDAN (GBP)
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
MONDEO I SEDAN (GBP)
(kvaliteediklass: Q)"

• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 480
• Name: LAMBDA ANDUR
• Manufacturer: DLP

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Oxygen Sensor: Switching-type Oxygen Sensor
• Cable Length [mm]: 290
• Alternatively:
• Supplementary Article/Info 2: without plug
• Number of circuits: 4
• Alternative Repair Kit: 570111
• Manufacturer: ERA

• Construction Year to: 04.2009
• Oxygen Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 681
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV672

• Construction Year to: 04.2009
• Oxygen Sensor: Regulating Sensor
• Voltage [V]: 12
• Length [mm]: 530
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV636

• Oxygen Sensor: Regulating Sensor, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 570
• Weight [kg]: 0.106
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Diagnostic Probe, Heated
• Number of pins: 4
• Cable Length [mm]: 500
• Quality: OE EQUIVALENT
• for OE number: 460002144910
• Manufacturer: MEAT&DORIA

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: BZG
• Fitting Position: before catalytic converter
• Length [mm]: 481
• Cable Length [mm]: 500
• Conductor Number: 4
• Supplementary Article/Info 2: with fastening material
• Available as universal article as well, see article no.: 1.997.007
• Number of circuits: 4
• Name: EP 1.998.072
• Manufacturer: EPS

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased

• Oxygen Sensor: Regulating Sensor, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 570
• Weight [kg]: 0.106
• Name: SW 33 10 3138
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Oxygen Sensor: Switching-type Oxygen Sensor
• Cable Length [mm]: 290
• Alternatively:
• Number of circuits: 4
• Alternative Repair Kit: 570112
• Manufacturer: ERA

• Thread Size: M18x1.5
• Cable Length [mm]: 255
• Number of pins: 4
• Manufacturer Restriction: DENSO
• for OE number: 03C906262
• Quality: OE
• Weight [g]: 94
• Gross Weight [g]: 124
• Manufacturer: DENSO
• Quality class: Q
• Name: Lambda sensor

Oxygen Sensor: Diagnostic Probe, Heated, Finger-type Sensor, Switching-type Oxygen Sensor

• Fitting Position: before catalytic converter
• Number of pins: 4
• Cable Length [mm]: 500
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: oval
• Weight [kg]: 0.14
• Name: VA 368083
• Manufacturer: VALEO

Oxygen Sensor: Regulating Sensor, Planar Sensor, Thread pre-greased, Heated

• Oxygen Sensor: Diagnostic Probe, Planar Sensor, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 260
• Manufacturer: DELPHI
• Name: DE ES20271-12B1

Additional information: "Tootja: DELPHI
FABIA (6Y2), 08.99-0
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
FABIA (6Y2), 08.99-0
(kvaliteediklass: PJ)"

• Line insulation design: with silicone-coated woven-fibre insulation
• Socket colour: black
• Number of circuits: 4
• Cable Length [mm]: 540
• Connector Shape: D Shape
• for OE number: 06A 906 265 AP
• Thread Size: M18 x 1,5
• Length [mm]: 680
• Number of pins: 4
• Manufacturer: VEMO GERMANY

Oxygen Sensor: Diagnostic Probe, Regulating Sensor, Thread pre-greased Fitting Position: after catalytic converter, before catalytic converter General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Connector Shape: D Shape
• for OE number: 03D 906 265 B
• Thread Size: M18 x 1,5
• Socket colour: black
• Number of circuits: 4
• Length [mm]: 650
• Number of pins: 4
• Number of connectors: 4
• Manufacturer: VEMO GERMANY

Oxygen Sensor: Diagnostic Probe, Regulating Sensor, Thread pre-greased Fitting Position: after catalytic converter, before catalytic converter General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Exhaust System: for pre-catalytic converter
• for OE number: 03E906262B, 04E906262
• Thread Size: M18x1.5
• Cable Length [mm]: 570
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 96
• Gross Weight [g]: 127
• Manufacturer: DENSO
• Name: DN DOX-1707
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Finger-type Sensor, Switching-type Oxygen Sensor

• Oxygen Sensor: Regulating Sensor
• Construction Year to: 04.2009
• Number of pins: 4
• Length [mm]: 550
• Housing Colour: black
• Alternative Repair Kit: 0893355
• Manufacturer: METZGER

• Engine Code: BZG
• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 500
• Thread Size: M18 x 1,5
• Connector Shape: D Shape
• Number of pins: 4
• Number of circuits: 4
• Oxygen Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Regulating Sensor, Heated
• Fitting Position: Exhaust Manifold
• Number of pins: 4
• Connector Shape: D Shape
• Socket colour: black
• Cable Length [mm]: 640
• Quality: OE EQUIVALENT
• for OE number: 04E906262A
• Name: Lambda andur
• Manufacturer: MD

• Line insulation design: with silicone-coated woven-fibre insulation
• Number of circuits: 4
• Connector Shape: D Shape
• Thread Size: M18 x 1,5
• Socket colour: black
• for OE number: 03C 906 262
• Cable Length [mm]: 160
• Length [mm]: 250
• Number of pins: 4
• Number of connectors: 4
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fitting Position: after catalytic converter
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Diagnostic Probe
• Construction Year to: 04.2009
• Length [mm]: 300
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Oxygen Sensor: Diagnostic Probe, Heated
• Voltage [V]: 12
• Conductor Number: 4
• Cable Length [mm]: 550
• Manufacturer: PIERBURG

• Engine Code: BME
• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Fitting Position: Exhaust Manifold, after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Connector Shape: D Shape
• Conductor Number: 4
• Cable Length [mm]: 450
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.