• Quantity per packing unit: 10
• Charge Type: Exhaust Turbocharger
• Thickness [mm]: 3.5
• Sealing Ring Diameter [mm]: 45.3
• Material: FPM (fluoride rubber)
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: BMS
• Material: Steel
• Weight [kg]: 0.006
• for OE number: 1J0 145 769 F
• Name: JULGESTUSSTOPPER
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [kg]: 0.006
• Manufacturer: METALCAUCHO

• Engine Code: BNV
• Quantity: 1
• Fitting Position: Throttle Valve
• Spring Clip Diameter [mm]: 52
• Material: Steel
• Manufacturer: METZGER

• Engine Code: BNV
• Thickness [mm]: 62
• Material: Steel
• Weight [kg]: 0.006
• Name: JULGESTUSSTOPPER
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Manufacturer: METALCAUCHO

• Quantity: 1
• Engine Code: BNV
• Quantity per packing unit: 10
• Diameter [mm]: 53.5
• Fitting Position: Charge Air Hose
• Spring Clip Diameter [mm]: 52
• Weight [kg]: 0.005
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity per packing unit: 10
• Charge Type: Exhaust Turbocharger
• Forward- /Backflow: for backflow
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Valve type: Non-Return Valve
• Operating Mode: Pressure Controlled
• General Information: non-return valve
• Manufacturer: VIKA

• Engine Code: BNV
• Turbocharger Line: Hot Side, Piping to charge air cooler
• Hose Length [mm]: 200
• Inner Diameter 1 [mm]: 49
• Inner Diameter 2 [mm]: 49
• Manufacturer: DENCKERMANN FILTRY

• Fitting Position: Charge Air Cooler, Inlet
• Manufacturer: NRF

• Length [mm]: 247
• for OE number: 6Q0 145 832 G
• Fitting Position: Charge Air Cooler, Lower
• Outer Diameter [mm]: 59
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: BUG

• Engine Code: BNV
• Turbocharger Line: Cold Side, Charge air cooler to piping
• Hose Length [mm]: 300
• Inner Diameter 1 [mm]: 46
• Inner Diameter 2 [mm]: 46
• Manufacturer: DENCKERMANN FILTRY

• Production date from: 05/05
• Fitting Position: Outlet
• for OE number: 6Q0145828P
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: SAS

• Fitting Position: Charge Air Cooler, Outlet
• Manufacturer: NRF

• Production date from: 05/05
• Fitting Position: Charge Air Cooler, Inlet
• for OE number: 6Q0145832J
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: SAS

• Engine Code: BNV
• Weight [kg]: 0.29
• Weight [g]: 290
• Manufacturer: METALCAUCHO

• Fitting Position: Charge Air Cooler, Outlet
• Turbocharger Line: Hot Side
• Name: Laadimisohu voolik
• Manufacturer: NRF

• Fitting Position: Charge Air Cooler, Upper
• Hose Type: Moulded Hose
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• General Information: pressure hose
• Manufacturer: VIKA

• for OE number: 6Q0145832J
• Weight [g]: 229
• Length [mm]: 202
• Inner Diameter 1 [mm]: 49
• Inner Diameter 2 [mm]: 49
• Name: IM 221825
• Manufacturer: ORIGINAL IMPERIUM

• Engine Code: BNV
• Turbocharger Line: Hot Side, Turbocharger to piping
• Material: PE (Polyethylene)
• Colour: black
• Hose Length [mm]: 350
• Inner Diameter 1 [mm]: 38
• Inner Diameter 2 [mm]: 36
• Observe broschure:
• Manufacturer: GATES

• Production date from: 05/05
• Fitting Position: Charge Air Cooler, Outlet
• for OE number: 6Q0145834
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: SAS

• Engine Code: BNV, BMS
• Turbocharger Line: Cold Side, Charge air cooler to piping
• Block Separation:
• Material: Polychloroprene (Neoprene)
• Colour: black
• Hose Length [mm]: 300
• Inner Diameter 1 [mm]: 46
• Inner Diameter 2 [mm]: 46
• Observe broschure:
• Manufacturer: GATES

• Engine Code: BNV
• Turbocharger Line: Hot Side, Piping to charge air cooler
• Material: PE (Polyethylene)
• Colour: black
• Hose Length [mm]: 200
• Inner Diameter 1 [mm]: 49
• Inner Diameter 2 [mm]: 49
• Observe broschure:
• Manufacturer: GATES

• Engine Code: BNV
• Fitting Position: Right Rear
• Cooling Hose: Turbocharger to piping, Hot Side
• Guarantee: 3 years guarantee
• Weight [kg]: 0.24
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN

• Engine Code: BNV
• Charge Type: Exhaust Turbocharger
• Slim Set:

• Fitting Position: Charge Air Cooler
• Fabrication Number: GPP-VW-033
• Manufacturer: NTY

• Engine Code: BNV
• Charge Type: Exhaust Turbocharger
• Lisainfo: Mounting Kit, charger
• Additional information: Mounting Kit, charger

• Fabrication Number: GPP-VW-104
• Manufacturer: NTY

• Engine Code: BNV
• Colour: black
• Material: PE (Polyethylene)
• Inner Diameter 1 [mm]: 38
• Inner Diameter 2 [mm]: 36
• Manufacturer: BORG & BECK

• for OE number: 6Q0145838H
• Fitting Position: Charge Air Cooler
• Length [mm]: 293
• Outer Diameter 1 [mm]: 53
• Outer Diameter 2 [mm]: 55
• Name: Laadimisohu voolik
• Manufacturer: MAX

• Supplementary Article/Info 2: with clamp
• Material: Rubber with fabric lining
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Upper, engine sided
• Turbocharger Line: Pipe connection to the throttle body
• Supplementary Article/Supplementary Info: with gasket/seal, with quick coupling
• Hose Type: Moulded Hose
• Consult accessories list for recommended additional repairs:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: BMS
• Forward- /Backflow: Supply Line
• Lisainfo: Oil Pipe, charger
• Additional information: Oil Pipe, charger

• Name: Laadimisohu voolik
• Manufacturer: NRF

• Engine Code: BNV
• Charge Type: Exhaust Turbocharger
• Alternative Repair Kit: KT110100E
• Name: MONTAA?IKOMPLEKT,KOMPRESSOR
• Manufacturer: FIS

• Engine Code: BMS
• Spanner Size: 17
• Number of connectors: 2
• Material: Steel
• Weight [kg]: 0.168
• Forward- /Backflow: for foreflow
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: BNV
• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: with bolts/screws
• Manufacturer: ELRING

• Fitting Position: Right Front
• Cooling Hose: Piping to engine block, Cold Side
• Guarantee: 3 years guarantee
• Weight [kg]: 0.22
• Always compare old and new part (in particular OE No.):
• Name: CE 24SKV089
• Manufacturer: ESEN SKV

• General Information: pressure hose
• Manufacturer: VIKA

• Engine Code: BMS
• Forward- /Backflow: Supply Line
• Name: Olihendus,kompressor
• Manufacturer: DRM

• Engine Code: BNV
• only in connection with: 70-41369-00
• Name: MONTAA?IKOMPLEKT,KOMPRESSOR
• Manufacturer: REI

• Length [mm]: 293
• for OE number: 6Q0145838H
• Fitting Position: Charge Air Cooler
• Outer Diameter 1 [mm]: 53
• Outer Diameter 2 [mm]: 55
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: BUG

• Supplementary Article/Supplementary Info: without EGR cooler
• Operating Mode: Electric-pneumatic
• Number of pins: 2
• Fabrication Number: EGR-AU-021
• Manufacturer: NTY

• Engine Code: BNV
• Turbocharger Line: Cold Side, Piping to engine block
• Material: AEM (Ethylene Acrylate Rubber)
• Colour: black
• Hose Length [mm]: 230
• Inner Diameter 1 [mm]: 39.5
• Inner Diameter 2 [mm]: 47
• Observe broschure:
• Manufacturer: GATES

• Engine Code: BMS
• Vehicle Identification Number (VIN) from: 9N-5-500001
• Valve type: Solenoid Valve
• Operating Mode: Electric-pneumatic
• Voltage [V]: 12
• Name: SURVEMUUNDUR, HEITGAASIDE JUHTIMINE
• Manufacturer: MAX

• Production date from: 05/05
• for OE number: 6Q0145838H
• Manufacturer: SASIC

• Connection Diameter (suction side) [mm]: 55
• Connection Diameter (pressure side) [mm]: 49
• Compression ring material: Stainless Steel
• Material: Rubber with fabric lining
• Weight [kg]: 0.262
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: BMS
• Forward- /Backflow: Supply Line
• Name: OLIšHENDUS,KOMPRESSOR
• Manufacturer: AJU

• Engine Code: BMS
• Forward- /Backflow: Supply Line
• Manufacturer: METZGER

• Operating Mode: Electric-pneumatic
• Manufacturer: JPN

• Fabrication Number: GPP-VW-092
• Fitting Position: Charge Air Cooler, Left, Upper
• Supplementary Article/Supplementary Info: with quick coupling
• Manufacturer: NTY

• Version: 1
• Engine Code: BNV
• Material: Stainless Steel
• Manufacturer: NISSENS

• Engine Code: BNV
• for OE number: 045145771K
• Forward- /Backflow: Supply Line
• Name: OLIšHENDUS,KOMPRESSOR
• Manufacturer: AJU

• Engine Code: BMS
• Slim Set:

• Engine Code: BMS
• Charge Type: Exhaust Turbocharger
• Lisainfo: Mounting Kit, charger
• Additional information: Mounting Kit, charger

• Engine Code: BMS
• Supplementary Article/Supplementary Info: with gaskets/seals
• Alternative Repair Kit: JTC11528
• Name: MONTAA?IKOMPLEKT,KOMPRESSOR
• Manufacturer: AJU

• Engine Code: BMS
• Material: Stainless Steel
• Manufacturer: NISSENS
• Name: NI 935034

• Engine Code: BMS
• Number of connectors: 3, 2
• Operating Mode: Electric-pneumatic
• Weight [kg]: 0.2
• Name: SURVEMUUNDUR, HEITGAASIDE JUHTIMINE
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: BMS
• only in connection with: 70-41369-00
• Name: MONTAA?IKOMPLEKT,KOMPRESSOR
• Manufacturer: REI
• Additional information: 04-10171-01
• Lisainfo: 04-10171-01

• Thickness [mm]: 5
• Inner Diameter [mm]: 47
• Outer Diameter [mm]: 65
• Guarantee: 3 years guarantee
• Weight [kg]: 0.22
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Vehicle Identification Number (VIN) from: 9N-5-500 001
• Engine Code: BMS
• Operating Mode: Electric-pneumatic
• Voltage [V]: 12
• Name: SURVEMUUNDUR,TURBOKOMPRESSOR
• Manufacturer: PIE
• Lisainfo: 7.00868.02.0
• Additional information: 7.00868.02.0

• Valve type: Solenoid Valve
• Operating Mode: Electric-pneumatic
• Voltage [V]: 12
• Number of pins: 2
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Guarantee: 3 years guarantee
• Weight [kg]: 0.22
• Always compare old and new part (in particular OE No.):
• Name: CE 24SKV647
• Manufacturer: ESEN SKV

• Voltage [V]: 12
• Operating Mode: Electric-pneumatic
• Valve type: Solenoid Valve
• Alternatively:
• Number of pins: 2
• Supplementary Article/Info 2: with clip
• Housing Colour: black
• Connector Shape: oval
• Alternative Repair Kit: 555171
• Manufacturer: ERA

• Engine Code: BMS
• Vehicle Identification Number (VIN) from: 9N-5-500 001
• for OE number: 1K0906627A
• Manufacturer: MEAT&DORIA

• Engine Code: BMS
• Voltage [V]: 12
• Operating Mode: Electric-pneumatic
• Valve type: Solenoid Valve
• Number of pins: 2
• Weight [kg]: 0.225
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Operating Mode: Electric-pneumatic
• Voltage [V]: 12
• for OE number: 1K0 906 627 E
• Width [mm]: 70
• Height [mm]: 50
• Length [mm]: 110
• Weight [g]: 369
• Guarantee: 3 years guarantee
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Engine Code: BMS
• Vehicle Identification Number (VIN): 9N-5-500 001
• Number of pins: 2
• Housing Colour: black
• Socket colour: white
• Manufacturer: FAE

• Engine Code: BMS
• Alternative Repair Kit: KT110480E
• Name: MONTAA?IKOMPLEKT,KOMPRESSOR
• Manufacturer: FIS

• Version: 2
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Engine Code: BNV
• Material: Stainless Steel
• Manufacturer: NISSENS

• Engine Code: BMS
• Vehicle Identification Number (VIN) from: 9N-5-500 001
• Valve type: Solenoid Valve
• Operating Mode: Electric-pneumatic
• Voltage [V]: 12
• Article number of recommended accessories: 1J0 973 722, 000 979 133, 6N0 906 102
• Version: OE
• Manufacturer: METZGER

• Charge Type: Exhaust Turbocharger
• Manufacturer: KAMOKA

• for article number: 60276
• for OE number: 1720111030
• Name: Turbolaadija, laadija
• Manufacturer: MD

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Engine Code: BNV
• Charge Type: Turbo
• Quality: Remanufactured
• Guarantee: 2 years guarantee

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Engine Code: BNV
• Charge Type: Turbo
• Quality: Remanufactured
• Guarantee: 2 years guarantee
• Supplementary Article/Supplementary Info: Incl. Gasket Set