• Number of pins: 2
• Sensor Type: NTC Sensor
• Connector Shape: D Shape
• Colour: black
• for OE number: 06B905379D
• Manufacturer: DELLO AUTOMEGA

• Number of pins: 4
• Socket colour: black
• Connector Shape: D Shape
• Fitted Diameter [mm]: 20
• Diameter [mm]: 25.5
• for OE number: 078 919 501 C
• Manufacturer: MEAT&DORIA

• Fitted Diameter [mm]: 20
• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• General Information: temperature sensor
• Manufacturer: VIKA

• Number of pins: 4
• Connector Shape: D Shape
• Socket colour: green
• Fitted Diameter [mm]: 20
• Diameter [mm]: 25.5
• for OE number: 059 919 501 A
• Manufacturer: MEAT&DORIA

• Engine Code: BGW
• Housing Colour: green
• Corresponds to the original part in colour: black
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Sensor Type: NTC Sensor
• Colour Coding: green
• Manufacturer: MAGNETI MARELLI
• Name: MM SPA109

• Fabrication Number: ECM-AU-001
• Number of pins: 4
• Manufacturer: NTY
• Name: NTY ECM-AU-001

• Engine Code: BGW
• Number of pins: 2
• Connector Shape: D Shape
• Socket colour: black
• Sensor Type: NTC Sensor
• Mounting Type: Clipped
• Fitting Position: Fuel Line
• for OE number: 038 906 081 B, 5033378AA
• Name: Andur, ktusetemperatuur
• Manufacturer: MD

• Weight [kg]: 0.017, 0.027
• Supplementary Article/Supplementary Info: with seal
• for OE number: 059 919 501 A
• Colour Coding: green
• Spring Design: Retaining Spring
• Number of pins: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Housing Type: without housing
• Supplementary Article/Info 2: with bracket, with seal ring
• Connector Shape: D Shape
• Sensor Type: NTC Sensor
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fabrication Number: ECM-AU-003
• Manufacturer: NTY

Lisainfo: ENG. 1.8T,2.0,24,3.0,4.2 AUDI A4 B6/B7/B8 A6 C5/C6, A8 D2/D3,Q7, VW PASSAT B5 Additional information: ENG. 1.8T,2.0,24,3.0,4.2 AUDI A4 B6/B7/B8 A6 C5/C6, A8 D2/D3,Q7, VW PASSAT B5

• Number of connectors: 4
• Manufacturer: JP GROUP
• Lisainfo: Thrust sensor for intercooler
• Additional information: Thrust sensor for intercooler

• Number of pins: 4
• for OE number: 036 906 051 C
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Cable Cross Section [mm²]: 0.75
• Manufacturer Restriction: VAG
• Socket Width [mm]: 2.8
• Number of pins: 3
• Cable Length [mm]: 250
• Contact surface: Tin-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt,
• Manufacturer: HBE

• Engine Code: BGW
• Number of pins: 4
• Connector Shape: D Shape
• Number of mounting bores: 2
• Supplementary Article/Supplementary Info: with seal
• Colour: black
• for OE number: 06B906051
• Manufacturer: DELLO AUTOMEGA

• Engine Code: BGW
• Number of pins: 4
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: MAX
• Lisainfo: 21-0216
• Additional information: 21-0216

• for OE number: 038 906 051 C
• Manufacturer: TRUCKTEC

• Connector Shape: D Shape
• Number of pins: 3
• Housing material: Plastic
• Housing Colour: black
• for OE number: 076906051A
• Manufacturer: DELLO AUTOMEGA

Exhaust System: for vehicles with factory fitted soot -/particulate filter, not for vehicles with retro-fitted soot/particulate filter

• Engine Code: BGW
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 4
• Weight [kg]: 0.04
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Connector Shape: D Shape
• Number of pins: 4
• Sensor Type: NTC Sensor
• Housing material: GRP (Glass fibre Reinforced Plastic), PBT
• Manufacturer: TOPRAN

Supplementary Article/Info 2: with seal ring, with integrated air temperature sensor General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Weight [kg]: 0.04
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Required quantity: 1
• Name: CZUJNIK CI—N. POWIETRZA VW GOLF 1,9TDI 00-
• Manufacturer: BRM

• Engine Code: BGW
• Number of connectors: 3
• Material: Plastic
• for OE number: 07Z 906 051 A
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: MAX
• Lisainfo: 21-0323
• Additional information: 21-0323

• Number of pins: 5
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Supplementary Article/Info 2: with cable
• Length [mm]: 1,000
• Height [mm]: 46
• Resistor [Ohm]: 540
• Number of connectors: 3
• Manufacturer: VERNET

• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAG

• Exhaust System: before soot particulate filter
• Emission Standard: Euro 4 (D4)
• for PR number: 7GG
• Number of pins: 3
• Pressure [Pa] from: 0
• Pressure [Pa] to: 90,000
• Manufacturer: NRF

• Number of pins: 4
• Pressure from [kPA]: 28
• Manufacturer: DELPHI
• Name: DE PS10117

• Engine Code: BGW
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Housing Type: with housing
• Fabrication Number: EPP-AU-001
• Manufacturer: NTY

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Manufacturer: BREMI

• Number of pins: 3
• Weight [kg]: 0.05
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Connector Shape: D Shape
• Number of pins: 3
• Manufacturer: TOPRAN

Exhaust System: for vehicles with factory fitted soot -/particulate filter, not for vehicles with retro-fitted soot/particulate filter General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Colour: black
• Alternatively:
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 4
• Pressure from [kPA]: 11
• Pressure to [kPA]: 254
• Alternative Repair Kit: 550265
• Manufacturer: ERA

• Alternatively:
• Number of connectors: 3
• Alternative Repair Kit: 550704
• Manufacturer: ERA

• Resistor Type: Hall Sensor
• Length [mm]: 1,010
• Supplementary Article/Info 2: with cable
• Manufacturer: VERNET

• Engine Code: BGW
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Voltage [V]: 12
• Fabrication Number: EPP-AU-031

• Engine Code: BGW
• Number of pins: 3
• Number of connectors: 2
• for OE number: 076 906 051 A
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Engine Code: BGW
• for PR number: 7GG
• Emission Standard: Euro 4 (D4)
• Exhaust System: before soot particulate filter
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.297
• Manufacturer: EPS

• General Information: pressure sensor
• Manufacturer: VIKA

• General Information: hall sender camshaft
• Manufacturer: VIKA

• Voltage [V]: 12
• Number of connectors: 2
• Fitting Depth [mm]: 44
• Manufacturer: BERU

• Number of pins: 4
• Connector Shape: D Shape
• Supplementary Article/Info 2: with cable
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Overall Length [mm]: 1,025
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: before catalytic converter
• Observe technical data:
• Manufacturer Restriction: VAG
• Number of pins: 6
• Cable Length [mm]: 250
• Cable Cross Section [mm²]: 1
• Socket Width [mm]: 2.8
• Contact surface: Tin-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, tagatuli
• Manufacturer: HBE

• Engine Code: BGW
• Number of pins: 4
• Manufacturer: MEYLE

• for OE number: 038 906 088 E
• Overall Length [mm]: 915
• Number of pins: 2
• Connector Shape: D Shape
• Socket colour: black
• Fabrication Number: EGT-VW-008
• Cable Length [mm]: 760
• Manufacturer: NTY

• Pressure [Pa] to: 90,000
• Number of pins: 3
• Manufacturer: FAE

• Engine Code: BGW
• Number of pins: 4
• Pressure from [kPA]: 20
• Pressure to [kPA]: 115
• Manufacturer: FAE

• for OE number: 038 906 088 B
• Fabrication Number: EGT-VW-001
• Cable Length [mm]: 1,150
• Manufacturer: NTY

Manufacturer: MAGNETI MARELLI

• Number of pins: 4
• Pressure from [kPA]: 20
• Pressure to [kPA]: 300
• Manufacturer: FAE

• Engine Code: BGW
• Number of connectors: 4
• Weight [kg]: 0.025
• for OE number: 038 906 051 C
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Length [mm]: 935
• Sensor Type: Hall Sensor
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: BGW
• Required quantity: 1
• Length [mm]: 1,010
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Vehicle Identification Number (VIN) from: 3B-2-000 001
• Engine Code: BGW
• for OE number: 28906461
• Number of pins: 5
• Voltage [V]: 12
• Manufacturer: DELLO AUTOMEGA

• Vehicle Identification Number (VIN) from: 3B-2-000 001
• Engine Code: BGW
• for OE number: 038906461C
• Number of pins: 5
• Voltage [V]: 12
• Manufacturer: DELLO AUTOMEGA

• Number of pins: 4
• Version: AM
• Article number of recommended accessories: 2324099
• Manufacturer: METZGER

• Engine Code: BGW
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: BOS

• Number of connectors: 3
• Pressure to [kPA]: 90
• Voltage from [V]: 0.5
• Voltage to [V]: 4.5
• Warranty: 5 years warranty
• Manufacturer: HUCO

• Thread Size: M14x17 mm
• Cable Length [mm]: 840
• Sensor Type: PTC
• Number of pins: 2
• Warranty: 3 years warranty
• Exhaust System: before turbocharger
• Temperature range to [°C]: 900
• Socket colour: black
• Length [mm]: 900
• Fuel Type: Diesel
• Mounting Inclination: 0
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV446

• Engine Code: BGW
• Housing Type: with housing
• Number of pins: 5
• Manufacturer: JP GROUP
• Lisainfo: Air meter
• Additional information: Air meter

• Number of pins: 4
• Mounting Type: Bolted
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PP009400251
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: BGW
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: D Shape
• Supplementary Article/Info 2: with cable
• Weight [kg]: 0.08
• Manufacturer: VALEO

• Engine Code: BGW, BHW
• Block Separation:
• Voltage [V]: 12
• Name: Ohumassimootja
• Manufacturer: MAX

• Sensor Type: Hall Sensor
• Number of pins: 3
• Manufacturer: FAE

• Engine Code: BGW
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: MAX

• Engine Code: BGW, BHW
• Block Separation:
• Number of pins: 5
• Voltage [V]: 12
• Name: OHUMASSIMOOTJA
• Manufacturer: MAX

• Emission Standard: Euro 4 (D4)
• for PR number: 7GG
• Block Separation:
• Engine Code: BGW
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE DPS00002

• Vehicle Identification Number (VIN) from: 3B-2-000 001
• Engine Code: BGW
• for OE number: 1209109
• Manufacturer: DELLO AUTOMEGA

• Engine Code: BGW
• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 5
• Weight [kg]: 0.32
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 07SKV083
• Manufacturer: ESEN SKV

• Engine Code: BGW
• Voltage [V]: 12
• Cable Length [mm]: 1,150
• Number of pins: 2
• Warranty: 3 years warranty
• Weight [kg]: 0.12
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV176

• Required quantity: 1
• Emission Standard: Euro 4 (D4)
• Fitting Position: before soot particulate filter
• for PR number: 7GG
• Connector Shape: D Shape
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 50
• Cable Length [mm]: 1,138
• Thread Size: M14x1.5
• Supplementary Article/Supplementary Info: with synthetic grease
• Name: Andur, heitgaasitemperatuur
• Manufacturer: NRF

• Housing Type: with housing
• Number of pins: 5
• Housing material: Plastic
• Connector Shape: D Shape
• Number of mounting bores: 2
• Supplementary Article/Info 2: with integrated grille
• Recommended additional repairs: Air Filter
• Article number of recommended accessories: 113 883
• New Part:
• Used part return not required:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping range from [mm]: 10, 11, 11.5, 12.5
• Clamping range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Manufacturer: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• Number of pins: 5
• Manufacturer: MEAT&DORIA

• Voltage [V]: 12
• Number of pins: 5
• Weight [kg]: 0.07
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 07SKV501
• Manufacturer: ESEN SKV

• Engine Code: BGW
• Voltage [V]: 12
• Cable Length [mm]: 760
• Number of pins: 2
• Warranty: 3 years warranty
• Weight [kg]: 0.1
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV039

• Engine Code: BGW
• Number of connectors: 2
• Fitting Position: before exhaust turbocharger
• Weight [kg]: 0.07
• for OE number: 038 906 088 E
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.