Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Oxygen Sensor: Diagnostic Probe,
Planar Sensor, Heated - Fitting Position: after catalytic converter
- Quantity: 1
-
Cable Length [mm]: 1,
530 - Name: LAMBDA ANDUR
- Manufacturer: DLP
Additional information: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)"
-
Fitting Position: Front,
after catalytic converter - Quantity: 1
-
Line insulation design: with silicone-
coated woven- fibre insulation - Cable Length [mm]: 720
-
Oxygen Sensor: Diagnostic Probe,
Thread pre- greased - Number of circuits: 4
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Oxygen Sensor: Diagnostic Probe
- Voltage [V]: 12
- Length [mm]: 760
- Guarantee: 3 years guarantee
- Number of circuits: 4
- Weight [kg]: 0.15
- Resistor [Ohm]: 9
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV694
- Oxygen Sensor: Unheated
- Number of pins: 4
- Cable Length [mm]: 630
- Quality: OE EQUIVALENT
- for OE number: 06A906262AS
- Manufacturer: MEAT&DORIA
- Transmission Type: Automatic Transmission
- Fitting Position: after catalytic converter
- Cable Length [mm]: 954
-
Oxygen Sensor: Planar Sensor,
Heated - Manufacturer: DELPHI
-
Name: DE ES20169-
12B1
-
Oxygen Sensor: Diagnostic Probe,
Planar Sensor, Heated - Fitting Position: after catalytic converter
- Quantity: 1
-
Cable Length [mm]: 1,
200 - Name: LAMBDA ANDUR
- Manufacturer: DLP
- Quality class: PJ
Additional information: "Tootja: DELPHI
OCTAVIA (1U2), 09.96
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
OCTAVIA (1U2), 09.96
(kvaliteediklass: PJ)"
- Oxygen Sensor: Diagnostic Probe
- Voltage [V]: 12
- Length [mm]: 800
- Guarantee: 3 years guarantee
- Number of circuits: 4
- Weight [kg]: 0.15
- Resistor [Ohm]: 6
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Manufacturer Restriction: DENSO
- Quality: OE
- Weight [g]: 93
- Gross Weight [g]: 140
- Manufacturer: DENSO
- Name: Lambda sensor
- Quality class: Q
Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
- Transmission Type: Automatic Transmission
-
Line insulation design: with silicone-
coated woven- fibre insulation - Number of pins: 4
- Socket colour: black
- Connector Shape: D Shape
- Length [mm]: 700
- for OE number: 030 906 262 L
-
Thread Size: M18 x 1,
5 - Cable Length [mm]: 700
- Number of circuits: 4
- Manufacturer: VEMO GERMANY
Oxygen Sensor: Diagnostic Probe, Regulating Sensor, Thread pre-greased Fitting Position: after catalytic converter, before catalytic converter General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Thread Size: M18x1.5
- Cable Length [mm]: 800
- Number of pins: 4
- Manufacturer Restriction: DENSO
- for OE number: 06C906265
- Quality: OE
- Weight [g]: 115
- Gross Weight [g]: 148
- Manufacturer: DENSO
-
Name: DN DOX-
2008 - Quality class: Q
Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor
Additional information: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)"
-
Oxygen Sensor: Diagnostic Probe,
Planar Sensor - Fitting Position: after catalytic converter
- Required quantity: 1
- Cable Length [mm]: 750
- Number of pins: 4
- Assy./disassy. by qualified personnel required!:
- Name: Lambda andur
- Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Oxygen Sensor: Regulating Sensor
- Fitting Position: before catalytic converter
-
Length [mm]: 1,
500 - Number of pins: 6
- Manufacturer: FAE
- Fitting Position: before catalytic converter
- Rated Voltage [V]: 12
- Number of pins: 6
- Connector Shape: oval
-
Cable Length [mm]: 1,
510 -
Overall Length [mm]: 1,
538 - Spanner Size: 22
- Thread Size: M 18
- Thread Pitch [mm]: 1.5
- Supplementary Article/Supplementary Info: with cable tie
-
Supplementary Article/Info 2: with plastic socket,
with heat shield pipe - Lubrication: with grease lubrication
- Full Set:
- Manufacturer: TOPRAN
Oxygen Sensor: Regulating Sensor, Broadband Oxygen Sensor, Heated, Planar Sensor General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Oxygen Sensor: Diagnostic Probe,
Regulating Sensor - Fitting Position: after catalytic converter
- Required quantity: 1
-
Cable Length [mm]: 1,
750 - Number of pins: 4
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PA358066391
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Construction Year from: 05.2002
- Construction Year to: 05.2005
-
Oxygen Sensor: Planar Sensor,
Thread pre- greased, Heated - Number of pins: 4
-
Cable Length [mm]: 1,
800 -
Thread Size: M18x1,
5 - Switch Pressure [bar]: 4
- Connector Shape: oval
- Manufacturer: VALEO
Fitting Position: before catalytic converter, after catalytic converter
- Oxygen Sensor: Heated
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Number of pins: 4
- Overall Length [mm]: 750
- General Information: Lambda sensor
- Manufacturer: BORSEHUNG
-
Oxygen Sensor: Switching-
type Oxygen Sensor - Voltage [V]: 12
- Colour: red
- Guarantee: 3 years guarantee
- Number of circuits: 5
- Weight [kg]: 0.15
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV905
- Number of pins: 5
- Connector Shape: D Shape
-
Cable Length [mm]: 1,
360 - Fitting Position: Exhaust Manifold
- Oxygen Sensor: Broadband Oxygen Sensor
- Quality: OE EQUIVALENT
- for OE number: 022906262H
- Manufacturer: MEAT&DORIA
-
Oxygen Sensor: Switching-
type Oxygen Sensor - Voltage [V]: 12
-
Length [mm]: 1,
510 - Guarantee: 3 years guarantee
- Number of circuits: 5
- Weight [kg]: 0.22
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV852
- Fitting Position: before catalytic converter
- Quantity: 1
- Cable Length [mm]: 950
- Name: LAMBDA ANDUR
- Manufacturer: DLP
Oxygen Sensor: Regulating Sensor, Switching-type Oxygen Sensor, Heated
- Construction Year to: 05.2005
- Oxygen Sensor: Regulating Sensor
- Fitting Position: before catalytic converter
- Number of circuits: 5
- Overall Length [mm]: 760
-
Recommended change interval [km]: 160,
000 - Name: BS 0258007057
- Manufacturer: BOSCH
-
Oxygen Sensor: Diagnostic Probe,
Broadband Oxygen Sensor - Fitting Position: after catalytic converter
- Required quantity: 1
- Cable Length [mm]: 800
- Number of pins: 6
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Name: Lambda andur
- Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
-
Oxygen Sensor: Switching-
type Oxygen Sensor - Guarantee: 3 years guarantee
- Weight [kg]: 0.15
- Always compare old and new part (in particular OE No.):
- Technical Information: Universal
- Name: CE 09SKV915
- Manufacturer: ESEN SKV
-
Oxygen Sensor: Regulating Sensor,
Switching- type Oxygen Sensor - Exhaust System: before catalytic converter
- Voltage [V]: 12
- Guarantee: 3 years guarantee
- Weight [kg]: 0.16
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV907
- Fitting Position: before catalytic converter
- Required quantity: 1
- Oxygen Sensor: Regulating Sensor
-
Cable Length [mm]: 1,
500 - Number of pins: 6
- Exhaust System: before catalytic converter
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years. Name: SONDA LAMBDA VV GOLF IV, TRANSPORTER, PHAETON 1,4-6,0 97-
- Oxygen Sensor: Heated
- Conductor Number: 5
- General Information: lambda probe; 5 wire
- Manufacturer: VIKA
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks