• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Lisainfo: AUDI A4 AVANT / QUATTRO
• Additional information: AUDI A4 AVANT / QUATTRO

• Quantity per axle: 2
• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle, Lower, Front, inner, both sides
• Article number of recommended accessories: 39430 01
• Observe service information:
• Manufacturer: LEMFORDER
• Name: LMI 1454101

SVHC: No information available, please contact the manufacturer!

• Vehicle Identification Number (VIN) to: 3B-3-072 000
• Manufacturer: JP GROUP
• Lisainfo: Bolts, nuts and washer for JP item no. 1140100210
• Additional information: Bolts, nuts and washer for JP item no. 1140100210

• Fitting Position: Front Axle Left, Front Axle Right, inner
• Mounting Type: Rubber-Metal Mount
• Manufacturer: JP-GROUP
• Lisainfo: Rubber mount for wishbone, front, rear
• Additional information: Rubber mount for wishbone, front, rear

• Suspension: for vehicles without sports suspension
• Fitting Position: Upper Front Axle, inner
• Manufacturer: JP GROUP
• Lisainfo: Rubber mount for wishbone, front
• Additional information: Rubber mount for wishbone, front

• Fitting Position: Front Axle Left, Front Axle Right, Upper, inner
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 4
• Axle alignment required after fitting:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Left, Front Axle Right, Lower, inner
• Manufacturer: JP GROUP
• Lisainfo: Rubber mount for wishbone, front, inner
• Additional information: Rubber mount for wishbone, front, inner

• Fitting Position: Lower Front Axle, Front, outer
• Manufacturer: JP GROUP
• Lisainfo: Rubber mount for wishbone, front, outer
• Additional information: Rubber mount for wishbone, front, outer

• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2
• Outer Diameter [mm]: 50
• Inner Diameter [mm]: 12
• Width [mm]: 31
• Manufacturer: TOPRAN

Fitting Position: Front Axle Left, Front Axle Right, Lower, Front, inner General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle, Upper
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 46
• Width [mm]: 40
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 829009410

• Quantity per packing unit: 5
• Control/Trailing Arm Type: for control arm
• Axle alignment required after fitting:
• Fitting Position: inner, Upper, Front Axle
• Mounting Type: Rubber-Metal Mount
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Lisainfo: Rubber mount for wishbone, front

• Fitting Position: Front Axle
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Height [mm]: 40
• Outer Diameter [mm]: 46
• Inner Diameter [mm]: 10
• Material: Rubber/Metal
• Weight [kg]: 0.07
• Name: DY 37-06034-5
• Manufacturer: DYS

• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2
• Outer Diameter [mm]: 40
• Inner Diameter [mm]: 12
• Width [mm]: 42
• Axle alignment required after fitting:
• Manufacturer: TOPRAN

Fitting Position: Front Axle Left, Front Axle Right, Lower, Front, outer General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle, Front, Lower, outer, both sides
• Required quantity: 2
• Weight [kg]: 0.1
• Outer Diameter [mm]: 40.3
• Inner Diameter [mm]: 12
• Manufacturer: TEDGUM

• Fitting Position: Front Axle, Lower
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Width [mm]: 50
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 829009810

• Fitting Position: Front Axle, Centre
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Height [mm]: 50
• Outer Diameter [mm]: 40
• Inner Diameter [mm]: 12
• Material: Rubber/Metal
• Weight [kg]: 0.11
• Name: DY 37-06046-6
• Manufacturer: DYS

• Fitting Position: Front Axle, Rear, Upper
• Inner Diameter 1 [mm]: 10
• Outer Diameter 1 [mm]: 47
• Thickness 1 [mm]: 40
• Manufacturer: DELPHI
• Name: DE TD437W

• Fitting Position: Front Axle, Rear, Upper
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 46.5
• for OE number: 4D0407515C
• Manufacturer: SASIC

• Fitting Position: Front, Lower Front Axle, outer
• Weight [kg]: 0.095
• Material: Rubber/Metal
• Thickness [mm]: 49
• Required quantity: 2
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40, 24
• General Information: control arm bush
• Manufacturer: VIKA

• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle, Upper, both sides, Front, Rear, inner
• Length [mm]: 40
• Inner Diameter [mm]: 10.1
• Outer Diameter [mm]: 46.4
• Quantity per axle: 4
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Lower Front Axle
• Fabrication Number: ZTP-AU-005A
• Manufacturer: NTY

• Fitting Position: Front Axle both sides, Upper
• Inner Diameter [mm]: 10.2
• Outer Diameter [mm]: 46
• Height [mm]: 40
• Name: ALT 80928AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle both sides, Upper, inner
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 46.4
• Inner Diameter [mm]: 10
• Weight [kg]: 0.086
• Length [mm]: 40
• Manufacturer: RTS

• Fitting Position: Front Axle, outer, Lower
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 40
• Thickness 1 [mm]: 50
• Name: DE TD441W
• Manufacturer: DELPHI

• Fitting Position: Front Axle, Lower
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 50
• Width 1 [mm]: 32
• Width 2 [mm]: 60
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 829009710

• Thickness [mm]: 49
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40, 24
• Material: Rubber/Metal
• Weight [kg]: 0.095
• Observe service information:
• Manufacturer: FEBI BILSTEIN

Fitting Position: Front Axle Left, Lower, Front, outer, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: inner, Upper Front Axle
• Weight [kg]: 0.078
• Material: Rubber/Metal
• Thickness [mm]: 40
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 47, 23
• General Information: control arm bush
• Manufacturer: VIKA

• Inner Diameter [mm]: 10
• Fitting Position: Front, Rear, both sides, Upper Front Axle
• Outer Diameter [mm]: 46.4
• Weight [kg]: 0.08
• Required quantity: 2
• Manufacturer: TEDGUM

• Length [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 50
• Material: Rubber/Metal
• Weight [kg]: 0.202
• Observe service information:
• Manufacturer: FEBI BILSTEIN

Fitting Position: Front Axle Left, Lower, Front, inner, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: outer, Front Axle both sides, Lower, Front
• Required quantity: 2
• paired article number: VKDS 331012
• Height [mm]: 50
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 40.2
• Name: SK VKDS331012
• Manufacturer: SKF

• Thickness [mm]: 49
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40, 24
• Material: Rubber/Metal
• Weight [kg]: 0.092
• Observe service information:
• Name: SW 32 69 0003
• Manufacturer: SWAG

Fitting Position: Front Axle Left, Lower, Front, outer, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, inner, Lower
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 50
• Thickness 1 [mm]: 60
• Manufacturer: DELPHI
• Name: DE TD440W

• Length [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 50
• Material: Rubber/Metal
• Weight [kg]: 0.202
• Observe service information:
• Name: SW 30 60 0031
• Manufacturer: SWAG

Fitting Position: Front Axle Left, Lower, Front, inner, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"

• Fitting Position: inner, Front, Front Axle both sides, Lower
• Weight [kg]: 0.202
• Length [mm]: 60
• Material: Rubber/Metal
• Required quantity: 2
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 50
• General Information: control arm bush
• Manufacturer: VIKA

• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle both sides, Lower, inner, Front
• Outer Diameter [mm]: 50.3
• Inner Diameter [mm]: 12.2
• Length [mm]: 60
• Weight [kg]: 0.202
• Manufacturer: RTS

• Fitting Position: Front Axle, outer
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Height [mm]: 60
• Outer Diameter [mm]: 50
• Inner Diameter [mm]: 12
• Material: Rubber/Metal
• Weight [kg]: 0.22
• Name: DY 37-06046-5
• Manufacturer: DYS

• Fitting Position: Lower, inner, Front
• Material: Rubber/Metal
• Outer Diameter [mm]: 50
• Manufacturer: KAMOKA

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, Lower, Front, inner
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 24
• Height [mm]: 60
• Name: ALT 80990AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle, Upper, both sides, Front, Rear
• Quantity per axle: 4
• Manufacturer: LEMFORDER
• Name: LMI 2590901

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle both sides, Lower, Front, inner
• Required quantity: 2
• paired article number: VKDS 331013
• Height [mm]: 60
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 24
• Name: SK VKDS331013
• Manufacturer: SKF

• Model Year to: 2002
• Fitting Position: Front, Rear, Upper Front Axle, outer
• Weight [kg]: 0.135
• Packaging length [cm]: 4.6
• Packaging width [cm]: 4.6
• Packaging height [cm]: 4
• Manufacturer: FEBEST

for PR number: 1BA, 1BB, 1BE, 1BF, 1BH, D3E, G0C, G0E, G0F, G0K, K8B, K8D, M70, MC9, MK6, MR2, MS7, MT0, MT1, MW2, MW6, MW8, MW9

• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 50.4
• Length [mm]: 60
• paired article number: 270327
• Weight [kg]: 0.21
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: in front of axle, Front Axle Left, Front Axle Right, Lower

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, both sides, Upper
• Control/Trailing Arm Type: Control Arm
• Required quantity: 4
• Height [mm]: 40
• Outer Diameter [mm]: 46.3
• Inner Diameter [mm]: 10.1
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.102
• Packaging length [cm]: 11
• Packaging width [cm]: 6
• Packaging height [cm]: 6
• Manufacturer: MONROE

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
A.A8 03-/VW PHEATON
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
A.A8 03-/VW PHEATON
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, Rear, Lower
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 65
• Thickness 1 [mm]: 80
• Manufacturer: DELPHI
• Name: DE TD439W

• Special Purpose Vehicle: not for armoured vehicles, not for police vehicles
• not for PR number: F4S, F4G
• Block Separation:
• for OE number: KIT 02
• Fitting Position: Front Axle both sides
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 1.6
• Control/Trailing Arm Type: Control Arm
• Manufacturer: SKV GERMANY
• Name: CE 04SKV111

• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 64
• Length [mm]: 80
• paired article number: 270437
• Weight [kg]: 0.51
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: behind the axle, Front Axle Left, Front Axle Right, Lower

• Quality: OE Performance
• Fitting Position: Front
• Colour: silver
• Weight [g]: 483
• Manufacturer: GATES

• Fitting Position: Front Axle
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Height [mm]: 81
• Outer Diameter [mm]: 65
• Inner Diameter [mm]: 12
• Material: Rubber/Metal
• Weight [kg]: 0.52
• Name: DY 37-06044-5
• Manufacturer: DYS

• Fitting Position: Rear, inner, Lower, Front Axle both sides
• Required quantity: 2
• paired article number: VKDS 331014
• Height [mm]: 80
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 64.9
• Name: SK VKDS331014
• Manufacturer: SKF

• Fitting Position: Front Axle Right, Lower, Rear
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 65
• Height [mm]: 80
• Name: ALT 80927AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle, both sides, Lower, Rear
• Control/Trailing Arm Type: Control Arm
• Required quantity: 2
• Height [mm]: 80
• Outer Diameter [mm]: 65
• Inner Diameter [mm]: 12.1
• Mounting Type: Hydro Mount
• Weight [kg]: 0.6
• Packaging length [cm]: 13.5
• Packaging width [cm]: 9.5
• Packaging height [cm]: 7
• Manufacturer: MONROE

• Mounting Type: Hydro Mount
• Fitting Position: both sides, Rear, Lower Front Axle
• Control/Trailing Arm Type: for control arm
• Axle alignment required after fitting:
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear, inner, Lower Front Axle
• Weight [kg]: 0.486
• Material: Rubber/Metal
• Thickness [mm]: 80
• Required quantity: 2
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 64
• General Information: control arm bush
• Manufacturer: VIKA

• Fitting Position: Front Axle, Lower
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 65
• Width [mm]: 80
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 829009610

• Quality: OE Performance
• Fitting Position: Front
• Colour: silver
• Weight [g]: 773
• Manufacturer: GATES

• new version:
• Thickness [mm]: 80
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 64
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Weight [kg]: 0.486
• for OE number: 4D0 407 183 AC
• Observe service information:
• Manufacturer: FEBI BILSTEIN

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• new version:
• Thickness [mm]: 80
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 65
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Weight [kg]: 0.484
• Observe service information:
• Name: SW 30 60 0041
• Manufacturer: SWAG

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mounting Type: Hydro Mount
• Fitting Position: Front Axle, Lower, both sides, Rear
• Length [mm]: 80
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 65
• Quantity per axle: 2
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, Lower, both sides, Rear
• Mounting Type: Hydro Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 65
• Inner Diameter [mm]: 12
• Width [mm]: 80
• Quantity per axle: 2
• Manufacturer: LEMFORDER
• Name: LMI 1765901

SVHC: No information available, please contact the manufacturer!

• Weight [kg]: 1.5
• Fitting Position: Rear Axle Left, Lower, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 15.3
• Manufacturer: RTS

• Weight [kg]: 1.5
• Fitting Position: Rear Axle Right, Lower, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 15.3
• Manufacturer: RTS

• Fitting Position: Front Axle
• General Information: Bush kit for control arm; 12 pcs
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with coupling rod
• Steering: with tie rod ends
• Fabrication Number: ZWD-VW-000
• Manufacturer: NTY
• Name: NTY ZWD-VW-000