• Charge Type: Exhaust Turbocharger
• Material: Stainless Steel
• Number of mounting bores: 3
• Name: TIHEND,KOMPRESSOR
• Manufacturer: FIS

• Charge Type: Exhaust Turbocharger
• Forward- /Backflow: for backflow
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thread Size 1: M10x1.0x12
• Thread Size 2: M14x1.5x10
• Additionally required articles (article numbers): 527.870.100
• Name: OONESKRUVI, KOMPRESSOR
• Manufacturer: FIS

• Thread Size 1: M10x1.0x12
• Thread Size 2: M14x1.5x10
• Name: Ooneskruvi, kompressor
• Manufacturer: FIS

• Slim Set:
• Manufacturer: FISCHER
• Name: FI KT110011E

• Charge Type: Exhaust Turbocharger
• Lisainfo: Mounting Kit, charger
• Additional information: Mounting Kit, charger

• Model Year from: 2001
• Model Year to: 2002
• Weight [kg]: 0.038
• Inner Diameter [mm]: 42
• Packaging length [cm]: 5.1
• Packaging width [cm]: 5.1
• Packaging height [cm]: 3.5
• Manufacturer: FEBEST

Manufacturer: NRF

• Weight [kg]: 0.12
• Weight [g]: 120
• Manufacturer: METALCAUCHO

• for OE number: 8D0145834A
• Name: Laadimisohu voolik
• Manufacturer: MAX

• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: with bolts/screws
• Manufacturer: ELRING

for OE number: 028 145 702 D, 028 145 702 E, 028 145 702 H, 028 145 702 N, 028 145 702 P, 028 145 702 R, 028 145 702 S, 028 145 702 T, 038 145 702 E, 038 145 702 G, 038 145 702 J, 038 145 702 L, 038 145 702 N, 03G 145 702 F, 03G 145 702 H, 03G 145 702 K, 1094742, 1094743, 454161-0001, 454161-0003, 454161-5003S, 454183-0001, 454183-0002, 454183-0003, 454183-5003S, 454183-5004S, 454231-0001, 454231-0002, 454231-0003, 454231-0004, 454231-0005, 454231-0006, 454231-0007, 454231-0008, 454231-0009, 454231-0010, 454231-5005S, 454231-5007S, 454231-5010S, 5303970-0109, 5303980-0109, 5303988-0109, 5303990-0109, 701854-0002, 701854-5004S, 701855-0001, 701855-0002, 701855-0003, 701855-0004, 701855-0005, 701855-0006, 701855-5005S, 701855-5006S, 706712-0001, 706712-5001S, 712077-0001, 716215-0001, 717858-0001, 717858-0002, 717858-0003, 717858-0004, 717858-0005, 717858-5008S, 717858-5009S, 758219-0002, 758219-0003, 758219-5003S, 761437-0003, 761437-0005

• for OE number: 8D0145834A
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: SAS

• Fabrication Number: GPP-VW-078
• Manufacturer: NTY

• General Information: pressure hose
• Manufacturer: VIKA

• Connector Ø pressure side [mm]: 58.5
• Connector Ø suction side [mm]: 58.5
• Material: Rubber with fabric lining
• Weight [kg]: 0.12
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Alternative Repair Kit: KT110011E, KTE000005
• Name: MONTAA?IKOMPLEKT,KOMPRESSOR
• Manufacturer: FIS

• for OE number: 8D0145834A
• Weight [g]: 150
• Length [mm]: 112
• Inner Diameter 1 [mm]: 50
• Inner Diameter 2 [mm]: 50
• Name: IM 221151
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Lower
• Manufacturer: JP GROUP
• Lisainfo: Charger Intake Hose
• Additional information: Charger Intake Hose

• Fitting Position: Right Rear
• Colour: black
• Material: PE (Polyethylene)
• Cooling Hose: Piping to engine block, Cold Side
• Inner Diameter 1 [mm]: 50
• Inner Diameter 2 [mm]: 50
• Weight [kg]: 0.11
• Warranty: 3 years warranty
• Hose Length [mm]: 90
• Suitable for vehicle type: PC (passenger car)
• Always compare old and new part (in particular OE No.):
• Name: CE 24SKV689
• Manufacturer: ESEN SKV

• Engine Code: AVB
• Manufacturer: MEAT&DORIA

• Engine Code: AVB
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: MONTAA?IKOMPLEKT,KOMPRESSOR
• Manufacturer: AJU
• Additional information: AJUJTC11055
• Lisainfo: AJUJTC11055

• Fitting Position: Charge Air Cooler, Outlet
• for OE number: 8D0145828H
• Name: Laadimisohu voolik
• Manufacturer: NRF

• Block Separation:
• Material: PE (Polyethylene)
• Colour: black
• Hose Length [mm]: 90
• Inner Diameter 1 [mm]: 50
• Inner Diameter 2 [mm]: 50
• Observe broschure:
• Name: Laadimisohu voolik
• Manufacturer: GAT

Turbocharger Line: Cold Side, Piping 1 to piping 2, Piping to engine block

• for OE number: 8D0 145828 L
• Length [mm]: 454
• Outer Diameter 1 [mm]: 56
• Outer Diameter 2 [mm]: 44
• Name: Laadimisohu voolik
• Manufacturer: MAX

• Fitting Position: Outlet
• for OE number: 8D0145828L
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: SAS

• Fitting Position: Lower, engine sided
• Hose Type: Moulded Hose
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fabrication Number: ECD-VW-042
• Manufacturer: NTY
• Name: NTY ECD-VW-042

• for OE number: 8D0 145828 L
• Length [mm]: 454
• Outer Diameter 1 [mm]: 56
• Outer Diameter 2 [mm]: 44
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: BUG

• Material: Rubber with fabric lining
• Fitting Position: Upper

• Material: Rubber with fabric lining
• Fabrication Number: GPP-VW-051
• Manufacturer: NTY

• Engine Code: AVB
• Name: Olihendus,kompressor
• Manufacturer: MAX

• Fitting Position: Left Rear
• Length [mm]: 454
• Cooling Hose: Turbocharger to piping, Hot Side
• Outer Diameter 1 [mm]: 56
• Outer Diameter 2 [mm]: 44
• Weight [kg]: 0.3
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 24SKV106

• for OE number: 3B0 145834 L
• Fitting Position: Charge Air Cooler, Lower
• Length [mm]: 252
• Outer Diameter 1 [mm]: 65
• Outer Diameter 2 [mm]: 58
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: MAX

• Turbocharger Line: Hot Side, Turbocharger to piping
• Material: PE (Polyethylene)
• Colour: black
• Hose Length [mm]: 420
• Inner Diameter 1 [mm]: 48
• Inner Diameter 2 [mm]: 35
• Observe broschure:
• Name: Laadimisohu voolik
• Manufacturer: GAT

• Charge Type: Exhaust Turbocharger
• Supplementary Article/Supplementary Info: with gaskets/seals
• Cooling Type: Air cooled
• Fabrication Number: ECD-VW-021

• for OE number: 058145856K
• Quantity Unit: Piece
• Weight [g]: 540
• Material, 1st layer: NBR (nitrile butadiene rubber)
• Material, 2nd layer: Aramid
• Material, 3rd layer: CR (chloroprene rubber)
• Name: Laadimisohu voolik
• Manufacturer: IBR

• Fitting Position: Lower
• Lisainfo: Charger Intake Hose
• Additional information: Charger Intake Hose

• Material: Rubber with fabric lining
• Component Number: 053-028-023
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Left Front
• Cooling Hose: Charge air cooler to piping, Cold Side
• Weight [kg]: 0.44
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 24SKV033

• for OE number: 3B0 145834 R
• Fitting Position: Charge Air Cooler, Upper
• Length [mm]: 490
• Outer Diameter 1 [mm]: 60
• Outer Diameter 2 [mm]: 65
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: MAX

• Fitting Position: Charge Air Cooler, Upper
• Supplementary Article/Supplementary Info: with seal, with quick coupling
• Hose Type: Moulded Hose
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Upper
• Lisainfo: Charger Intake Hose
• Additional information: Charger Intake Hose

• Supplementary Article/Supplementary Info: without EGR cooler
• Operating Mode: Electric-pneumatic
• Number of pins: 2
• Fabrication Number: EGR-AU-020
• Manufacturer: NTY
• Name: NTY EGR-AU-020

• Fitting Position: Charge Air Cooler, Inlet
• for OE number: 3B0145834L
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: SAS

• Name: Laadimisohu voolik
• Manufacturer: NRF

• Fitting Position: Lower, Left
• Material: ACM (Polyacrylate)
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: MEY

• Valve type: Solenoid Valve
• Operating Mode: Electric-pneumatic
• Connector Shape: rectangular, D Shape
• Number of pins: 2
• Number of connectors: 3
• Rated Voltage [V]: 12
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Turbocharger Line: Piping to charge air cooler, Hot Side
• Fitting Position: Left Front
• Cooling Hose: Piping to charge air cooler, Hot Side
• Weight [kg]: 0.32
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Turbocharger Line: Hot Side, Piping to charge air cooler
• Material: AEM (Ethylene Acrylate Rubber)
• Colour: black
• Hose Length [mm]: 205
• Inner Diameter 1 [mm]: 49
• Inner Diameter 2 [mm]: 49
• Observe broschure:
• Manufacturer: GATES

• Engine Code: AVB
• Valve type: Solenoid Valve
• Operating Mode: Electric-pneumatic
• Voltage [V]: 12
• Technical Information Number: SI 0096
• Name: Survemuundur,turbokompressor
• Manufacturer: MAX

• Connector Ø suction side [mm]: 58
• Connector Ø pressure side [mm]: 43
• Material: Rubber with fabric lining
• for OE number: 8D0 145 828 L
• Fitting Position: Lower
• Weight [kg]: 0.315
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AVB
• for OE number: 038145771L
• Forward- /Backflow: Supply Line
• Name: OLIšHENDUS,KOMPRESSOR
• Manufacturer: AJU
• Additional information: AJUOP10082
• Lisainfo: AJUOP10082

• for OE number: 3B0 145834 L
• Fitting Position: Charge Air Cooler, Lower
• Length [mm]: 252
• Outer Diameter 1 [mm]: 65
• Outer Diameter 2 [mm]: 58
• Material: AEM (Ethylene Acrylate Rubber)
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: BUG

• Fitting Position: Centre
• Cooling Hose: Charge air cooler to piping, Cold Side
• Weight [kg]: 0.46
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 24SKV070

• for OE number: 8D0145834J
• Weight [g]: 320
• Connector Manufacturer: HENN
• Length [mm]: 170
• Inner Diameter 1 [mm]: 51
• Inner Diameter 2 [mm]: 51
• Manufacturer: IMPERGOM
• Name: IM 221860

Manufacturer: METALCAUCHO

• Material: Rubber with fabric lining
• Fitting Position: Lower
• General Information: pressure hose
• Manufacturer: VIKA

• for OE number: 3B0145834R
• Weight [g]: 453
• Connector Manufacturer: HENN
• Length [mm]: 414
• Inner Diameter 1 [mm]: 38
• Inner Diameter 2 [mm]: 47
• Manufacturer: IMPERGOM

• Fitting Position: Exhaust Turbocharger
• Article number of recommended accessories: 2400580
• Manufacturer: METZGER

• Engine Code: AVB
• Vehicle Identification Number (VIN) from: 3B-V-000001
• Operating Mode: Electric-pneumatic
• Voltage [V]: 12
• Name: SURVEMUUNDUR, HEITGAASIDE JUHTIMINE
• Manufacturer: MAX

• Fitting Position: Lower, Right
• Manufacturer: FAST

• Turbocharger Line: Cold Side, Charge air cooler to piping
• Material: AEM (Ethylene Acrylate Rubber)
• Colour: black
• Hose Length [mm]: 435
• Inner Diameter 1 [mm]: 38
• Inner Diameter 2 [mm]: 47
• Observe broschure:
• Manufacturer: GATES

• Connector Ø pressure side [mm]: 50
• Connector Ø suction side [mm]: 50
• Compression ring material: Stainless Steel
• Material: Rubber with fabric lining
• Fitting Position: Lower
• Weight [kg]: 0.27
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Manufacturer: 3RG

• Fitting Position: Charge Air Cooler, Outlet
• for OE number: 3B0145834R
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: SAS

• Fitting Position: Lower Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Left Front
• Cooling Hose: Piping to charge air cooler, Hot Side
• Weight [kg]: 0.28
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 24SKV750

• Engine Code: AVB
• Valve type: Solenoid Valve
• Operating Mode: Electric-pneumatic
• Voltage [V]: 12
• Manufacturer: PIERBURG

• for OE number: 3B0 145834 R
• Fitting Position: Charge Air Cooler, Upper
• Length [mm]: 490
• Outer Diameter 1 [mm]: 60
• Outer Diameter 2 [mm]: 65
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: BUG

• General Information: pressure hose
• Manufacturer: VIKA

• Connector Ø pressure side [mm]: 46
• Connector Ø suction side [mm]: 59
• Compression ring material: Stainless Steel
• for OE number: 3B0 145 828 G
• Material: Rubber with fabric lining
• Weight [kg]: 0.39
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Valve type: Solenoid Valve
• Operating Mode: Electric-pneumatic
• Voltage [V]: 12
• Number of pins: 2
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Forward- /Backflow: Supply Line
• Fitting Position: Exhaust Turbocharger
• Manufacturer: METZGER

• Model Year from: 2001
• Voltage [V]: 12
• Diameter 1 [mm]: 6
• Diameter 2 [mm]: 6
• Diameter 3 [mm]: 4
• Operating Mode: Electric-pneumatic
• Alternatively:
• Number of pins: 2
• Alternative Repair Kit: 555173
• Manufacturer: ERA

• Engine Code: AVB
• for OE number: 038145771L
• Manufacturer: MEAT&DORIA

• Supplementary Article/Info 2: with mounting kit
• Name: FI 611901Z
• Manufacturer: FA1