• Number of pins: 2
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: MAX

• Engine Code: BBG
• Housing Colour: green
• Corresponds to the original part in colour: black
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Fabrication Number: ECP-AU-003
• Manufacturer: NTY

• Engine Code: BBG
• Required quantity: 1
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Sensor Type: Active sensor
• for OE number: 058 905 161 B
• Manufacturer: KAMOKA

• Thread Size: 12 mm
• Manufacturer: CALORSTAT BY VERNET

• Weight [kg]: 0.017, 0.027
• Supplementary Article/Supplementary Info: with seal
• for OE number: 059 919 501 A
• Colour Coding: green
• Spring Design: Retaining Spring
• Number of pins: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of connectors: 2
• Weight [kg]: 0.015
• for OE number: 058 905 379
• Name: Andur,sisendohu temperatuur
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fabrication Number: ECM-AU-003
• Manufacturer: NTY

Lisainfo: ENG. 1.8T,2.0,24,3.0,4.2 AUDI A4 B6/B7/B8 A6 C5/C6, A8 D2/D3,Q7, VW PASSAT B5 Additional information: ENG. 1.8T,2.0,24,3.0,4.2 AUDI A4 B6/B7/B8 A6 C5/C6, A8 D2/D3,Q7, VW PASSAT B5

• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Quantity: 2
• Voltage [V]: 12
• Number of pins: 3
• Name: Andur,steimpulss
• Manufacturer: MAX

• Sensor Type: Hall Sensor
• Connector Shape: rectangular
• Number of pins: 3
• General Information: hall sender camshaft
• Manufacturer: VIKA

• Required quantity: 1
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA
• Name: HE 6PT009109181

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 2
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: grey
• Manufacturer: BREMI

• General Information: pressure sensor
• Manufacturer: VIKA

• Number of pins: 4
• Supplementary Article/Supplementary Info: with seal
• Colour: black
• for OE number: 06B906051
• Manufacturer: DELLO AUTOMEGA

• Sensor Type: Hall Sensor
• Connector Shape: rectangular
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Plug housing design: Plug sleeve housing
• Manufacturer Restriction: BMW, Volvo, VAG
• Number of pins: 3
• Cable Length [mm]: 250
• Cable Cross Section [mm²]: 1
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• SVHC: No SVHC present!
• Manufacturer: HBE

Name: Kaabliparanduskomplekt, seadeelement- tulede ulatuse regul

• Sensor Type: Hall Sensor
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MEY

• Quantity: 2
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-AU-003
• Manufacturer: NTY

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Engine Code: BBG
• Housing Colour: brown
• Length [mm]: 570
• Manufacturer: EPS

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe, Heated
• Number of pins: 4
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: BOS

• Quantity: 2
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Required quantity: 2
• Voltage [V]: 12
• Sensor Type: Hall Sensor
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU012681021
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Diagnostic Probe
• Number of circuits: 4
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Number of connectors: 3
• Weight [kg]: 0.062
• for OE number: 058 905 161 B
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Cable Length [mm]: 485
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE AS10203

• Fitting Position: before catalytic converter
• Observe technical data:
• Manufacturer Restriction: VAG
• Number of pins: 6
• Cable Length [mm]: 250
• Cable Cross Section [mm²]: 1
• Socket Width [mm]: 2.8
• Contact surface: Tin-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, tagatuli
• Manufacturer: HBE

• Number of pins: 4
• Fabrication Number: EPP-AU-021
• Manufacturer: NTY

• Length [mm]: 570
• Number of connectors: 3
• Weight [kg]: 0.069
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [kg]: 0.27
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV154

• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.09
• Manufacturer: VALEO
• Name: VA 253814

• Engine Code: BBG
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Weight [kg]: 0.096
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Length [mm]: 1,500
• Name: Lambda andur
• Manufacturer: MAX

• Construction Year from: 05.2002
• Lambda Sensor: Heated
• Number of circuits: 4
• Overall Length [mm]: 1,700
• Name: Lambda andur
• Manufacturer: MAX

Fitting Position: before catalytic converter, after catalytic converter

• Construction Year from: 05.2002
• Lambda Sensor: Heated
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

Fitting Position: before catalytic converter, after catalytic converter

• Required quantity: 1
• Number of pins: 4
• Suction pipe connector diameter [mm]: 82
• Quality class: PJ
• Name: Air flow sensor

• Quantity: 2
• Block Separation:
• Cable Length [mm]: 620
• Manufacturer: DELPHI
• Name: DE ES20160-12B1

Lambda Sensor: Regulating Probe, Diagnostic Probe, Planar probe, Heated Fitting Position: before catalytic converter, Left, Right, Front, after catalytic converter

• Construction Year from: 05.2002
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, Left
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Fitting Position: Right
• Lambda Sensor: Diagnostic Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 1,700
• Weight [kg]: 0.15
• Name: SW 33 10 3156
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 04.2002
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, Left
• Number of circuits: 3
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda Sensor: Heated
• Overall Length [mm]: 1,700
• Number of pins: 4
• Recommended change interval [km]: 160,000
• General Information: lambda probe; 4 wire
• Manufacturer: VIKA

• Engine Code: BBG
• Required quantity: 2
• Block Separation:
• Cable Length [mm]: 250
• Conductor Number: 4
• Number of circuits: 4
• Manufacturer: EPS

Fitting Position: before catalytic converter, Left, Right, Front, after catalytic converter Lambda Sensor: Regulating Probe, Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Engine Code: BBG
• Required quantity: 2
• Manufacturer: EPS

• General Information: camshaft position sensor
• Manufacturer: BORSEHUNG

• Quantity: 2
• Block Separation:
• Cable Length [mm]: 1,690
• Manufacturer: DELPHI
• Name: DE ES20164-12B1

Lambda Sensor: Regulating Probe, Diagnostic Probe, Planar probe, Heated Fitting Position: before catalytic converter, Left, Right, Front, after catalytic converter

• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• Lambda Sensor: Heated
• Overall Length [mm]: 1,700
• Number of pins: 4
• Recommended change interval [km]: 160,000
• General Information: lambda probe; 4 wire
• Manufacturer: VIKA

• Construction Year from: 05.2002
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, Left
• Number of circuits: 4
• Overall Length [mm]: 1,700
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Overall Length [mm]: 1,700
• Recommended change interval [km]: 160,000
• Number of pins: 4
• Lambda Sensor: Heated
• General Information: lambda probe
• Manufacturer: BORSEHUNG

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 4
• Name: OHUMASSIMOOTJA
• Manufacturer: BRM

• Lambda Sensor: Heated
• Overall Length [mm]: 1,700
• Number of pins: 4
• Recommended change interval [km]: 160,000
• General Information: lambda probe; 4 wire
• Manufacturer: VIKA

• Quantity: 1
• Housing Type: without housing
• Number of pins: 4
• Plug Type: Male
• Housing Colour: black/silver
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: Ohumassimootja
• Manufacturer: DLP

• for PR number: 0L2
• Number of mounting bores: 3
• Number of pins: 6
• Transmission Type: Automatic Transmission
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, SOIDUPEDAALIASEND
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Transmission Type: 5-Speed Manual Transmission, Manual Transmission
• for PR number: 0L2
• Number of mounting bores: 3
• Number of pins: 6
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, SOIDUPEDAALIASEND
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 1
• Mounting Type: Bolted
• Number of pins: 4
• Suction pipe connector diameter [mm]: 82
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 8ET009142241

Brief Information: *** HELLA Electronics OE competence for over 60 years.