• Fitting Position: Front Axle, inner, Lower, Upper, Front, Rear
• Quantity Unit: Piece
• Mounting Type: Rubber-Metal Mount
• Net weight [kg]: 0.1

• Fitting Position: inner, Front Axle, Lower, Front
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Lisainfo: AUDI A4 AVANT / QUATTRO
• Additional information: AUDI A4 AVANT / QUATTRO

• Quantity per axle: 2
• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle, Lower, Front, inner, both sides
• Article number of recommended accessories: 39430 01
• Observe service information:
• Name: Puks - K„„ndmik VW P. A4/PASSAT 97-
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

Lisainfo: Rubber mount for wishbone, front, rear

• Suspension: for vehicles without sports suspension
• Fitting Position: Upper Front Axle, inner
• Manufacturer: JP GROUP
• Lisainfo: Rubber mount for wishbone, front
• Additional information: Rubber mount for wishbone, front

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Stabilizer link mount left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"

• Material: Rubber/Metal
• Thickness [mm]: 49
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40, 24
• Manufacturer: MERTZ

Fitting Position: Front Axle Left, Front Axle Right, Lower, Front, outer

• Fitting Position: Lower, Front, Front Axle Left, Front Axle Right
• Material: Rubber/Metal
• Thickness [mm]: 49
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40, 24
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left, Front Axle Right, Upper, inner
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 4
• Axle alignment required after fitting:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2
• Outer Diameter [mm]: 50
• Inner Diameter [mm]: 12
• Width [mm]: 31
• Manufacturer: TOPRAN

Fitting Position: Front Axle Left, Front Axle Right, Lower, Front, inner General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle, Upper
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 46
• Width [mm]: 40
• SVHC: No SVHC present!
• Name: Puks
• Manufacturer: FAG

• Fitting Position: Front Axle
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.07
• Name: DY 37-06034-5
• Manufacturer: DYS

• Fitting Position: Front Axle Left, Upper, Front Axle Right
• Manufacturer: GSP

• Fitting Position: Front Axle, inner, Upper, Front, Rear
• Required quantity: 4
• Inner Diameter 1 [mm]: 10
• Outer Diameter 1 [mm]: 47
• Thickness 1 [mm]: 40
• Manufacturer: DELPHI

• Fitting Position: Lower Front Axle
• Fabrication Number: ZTP-AU-005A

• Length [mm]: 60
• Material: Rubber/Metal
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 50
• Manufacturer: MERTZ

Fitting Position: Front Axle Left, Front Axle Right, Lower, Front, inner

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"

• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2
• Outer Diameter [mm]: 40
• Inner Diameter [mm]: 12
• Width [mm]: 42
• Axle alignment required after fitting:
• Manufacturer: TOPRAN

Fitting Position: Front Axle Left, Front Axle Right, Lower, Front, outer General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle, Centre
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.11
• Name: DY 37-06046-6
• Manufacturer: DYS

• Fitting Position: Front Axle, Front, outer, Right, Left
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 40.3
• Weight [kg]: 0.09
• Name: COC 21652796
• Manufacturer: CORTECO

• Fitting Position: Front Axle, Lower
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Width [mm]: 50
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Front Axle, Lower, Front, outer, both sides
• Control/Trailing Arm Type: for control arm
• Name: Puks - K„„ndmik VW P. A4/A6/A8/PASSAT 97- DOLNA
• Manufacturer: MAX

• Fitting Position: Front, Lower Front Axle, outer
• Material: Rubber/Metal
• Thickness [mm]: 49
• Weight [kg]: 0.095
• Required quantity: 2
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40, 24
• General Information: control arm bush
• Manufacturer: VIKA

• Fitting Position: Front Axle, outer, Lower, Front
• Required quantity: 2
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 40
• Thickness 1 [mm]: 50
• Name: DE TD441W
• Manufacturer: DELPHI

• Fitting Position: Lower, Front, Front Axle Left, Front Axle Right
• Material: Rubber/Metal
• Length from [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 50
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, Lower, Front, outer
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Height [mm]: 50
• Name: ALT 80989AL
• Manufacturer: ALTE AUTOMOTIVE

• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle, Lower, Front, inner, both sides
• Name: Puks - K„„ndmik VW P. A4/PASSA
• Manufacturer: MAX

• Thickness [mm]: 49
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40, 24
• Material: Rubber/Metal
• Weight [kg]: 0.095
• Observe service information:
• Name: Puks - K„„ndmik VW P. A4/A6/A8
• Manufacturer: FEB

Fitting Position: Front Axle Left, Lower, Front, outer, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 50
• Material: Rubber/Metal
• Weight [kg]: 0.202
• Observe service information:
• Name: Puks - K„„ndmik VW P. A4/PASSA
• Manufacturer: FEB

Fitting Position: Front Axle Left, Lower, Front, inner, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Lower
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 50
• Width 1 [mm]: 32
• Width 2 [mm]: 60
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 829009710

• Outer Diameter 1 [mm]: 40
• Inner Diameter 1 [mm]: 12
• Thickness 1 [mm]: 50
• Manufacturer: BGA

Fitting Position: outer, Lower, Front, Front Axle Left, Front Axle Right

• Thickness [mm]: 49
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40, 24
• Material: Rubber/Metal
• Weight [kg]: 0.092
• Observe service information:
• Name: SW 32 69 0003
• Manufacturer: SWAG

Fitting Position: Front Axle Left, Lower, Front, outer, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Lower, outer, Front, Front Axle both sides
• Required quantity: 2
• paired article number: VKDS 331012
• Height [mm]: 50
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 40.2
• Name: SK VKDS331012
• Manufacturer: SKF

• Fitting Position: Front Axle, Front, inner, Right, Left
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 50.2
• Weight [kg]: 0.2
• Manufacturer: CORTECO
• Name: COC 21652815

• Fitting Position: Front Axle, inner, Lower, Front
• Required quantity: 2
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 50
• Thickness 1 [mm]: 60
• Manufacturer: DELPHI
• Name: DE TD440W

• Length [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 50
• Material: Rubber/Metal
• Weight [kg]: 0.202
• Observe service information:
• Manufacturer: SWAG
• Name: SW 30 60 0031

Fitting Position: Front Axle Left, Lower, Front, inner, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, inner, Lower, Front
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 50
• Length [mm]: 60
• Quantity Unit: Piece
• Mounting Type: Rubber-Metal Mount
• Net weight [kg]: 0.19
• Manufacturer: NK

Name: Puks - K„„ndmik VW P. A4/PASSAT 97- DOLNEGO LE/PR (PRO)

• Fitting Position: inner, Upper Front Axle
• Material: Rubber/Metal
• Thickness [mm]: 40
• Weight [kg]: 0.078
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 47, 23
• General Information: control arm bush
• Manufacturer: VIKA

• Fitting Position: inner, Front, Front Axle both sides, Lower
• Material: Rubber/Metal
• Length [mm]: 60
• Weight [kg]: 0.202
• Required quantity: 2
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 50
• General Information: control arm bush
• Manufacturer: VIKA

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, Lower, Front, inner
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 24
• Height [mm]: 60
• Name: ALT 80990AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Lower, inner, Front
• Material: Rubber/Metal
• Outer Diameter [mm]: 50
• Manufacturer: KAMOKA

• Fitting Position: Front Axle, outer
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.22
• Name: DY 37-06046-5
• Manufacturer: DYS

• Suspension: for vehicles without sports suspension
• Fitting Position: Upper, Front Axle Left, Front Axle Right
• Height [mm]: 40
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 47
• Supplementary Article/Supplementary Info: without holder
• reinforced version:
• Required quantity: 2
• Replace in pairs only:
• with environmental seal: Carbon neutral
• Name: Puks - K„„ndmik VW P. A4/A6/A8 97-
• Manufacturer: MEY

General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.

• for OE number: 4D0 407 182 E
• Fitting Position: Lower Front Axle
• Manufacturer: GSP

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"

• Model Year from: 2003
• Fitting Position: Front, Rear, Upper Front Axle, outer
• Weight [kg]: 0.135
• Packaging length [cm]: 4.6
• Packaging width [cm]: 4.6
• Packaging height [cm]: 4
• Manufacturer: FEBEST

• Fitting Position: Front Axle, inner, Front, Rear
• Height [mm]: 40
• Weight [kg]: 0.102
• Required quantity: 4
• Inner Diameter [mm]: 10.1
• Outer Diameter [mm]: 46.3
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Packaging length [cm]: 11
• Packaging width [cm]: 6
• Packaging height [cm]: 6
• Manufacturer: MONROE

• Fitting Position: Front Axle both sides, Front, Lower, inner
• Required quantity: 2
• paired article number: VKDS 331013
• Height [mm]: 60
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 24
• Name: SK VKDS331013
• Manufacturer: SKF

• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 50.4
• Length [mm]: 60
• paired article number: 270327
• Weight [kg]: 0.21
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: in front of axle, Front Axle Left, Front Axle Right, Lower

• Fitting Position: Front Axle, Upper, both sides, Front, Rear
• Quantity per axle: 4
• Name: Puks - K„„ndmik VW P. A4/PASSAT 01-
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"

• Construction Year to: 11.2000
• Fitting Position: Front Axle Left, Front Axle Right, Rear, inner
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2
• Outer Diameter [mm]: 65
• Inner Diameter [mm]: 12
• Width [mm]: 65
• Axle alignment required after fitting:
• old version:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: inner, Lower Front Axle
• Manufacturer: GSP

• Fitting Position: Lower, Rear, Front Axle Left, Front Axle Right
• for OE number: 4D0 407 183 AC
• Material: Rubber/Metal
• Thickness [mm]: 80
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 64
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, Lower, Front, outer, both sides
• Control/Trailing Arm Type: for control arm
• Quantity per axle: 2
• Manufacturer: LEMFÖRDER

SVHC: No information available, please contact the manufacturer!

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, Lower, both sides, Rear
• Mounting Type: Hydro Mount
• Control/Trailing Arm Type: for control arm
• Width [mm]: 80
• Outer Diameter [mm]: 65
• Inner Diameter [mm]: 12
• Name: Puks - K„„ndmik VW P. A4/PASSA
• Manufacturer: MAX

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
A.A8 03-/VW PHEATON
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
A.A8 03-/VW PHEATON
(kvaliteediklass: PJ)"

• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 64
• Length [mm]: 80
• paired article number: 270437
• Weight [kg]: 0.51
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: behind the axle, Front Axle Left, Front Axle Right, Lower

• Fitting Position: Rear, Lower, Front Axle Left, Front Axle Right
• Thickness [mm]: 80
• Outer Diameter 1 [mm]: 64
• Inner Diameter 1 [mm]: 12
• Manufacturer: BGA

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.52
• Name: DY 37-06044-5
• Manufacturer: DYS

• Fitting Position: Front Axle, Rear, inner, Right, Left
• Total Length [mm]: 80
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 65
• Weight [kg]: 0.53
• Manufacturer: CORTECO
• Name: COC 21652814

• Fitting Position: Front Axle, inner
• Axle: 1st RA
• Height [mm]: 80
• Weight [kg]: 0.6
• Required quantity: 2
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 65
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Hydro Mount
• Packaging length [cm]: 13.5
• Packaging width [cm]: 9.5
• Packaging height [cm]: 7
• Manufacturer: MONROE

• Fitting Position: Front Axle, inner, Lower, Rear
• Required quantity: 2
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 65
• Thickness 1 [mm]: 80
• Manufacturer: DELPHI

• Fitting Position: Front Axle Right, Lower, Rear
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 65
• Height [mm]: 80
• Name: ALT 80927AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear, inner, Front Axle both sides, Lower
• Required quantity: 2
• paired article number: VKDS 331014
• Height [mm]: 80
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 64.9
• Manufacturer: SKF
• Name: SK VKDS331014

• Special Purpose Vehicle: not for armoured vehicles, not for police vehicles
• not for PR number: F4S, F4G
• Block Separation:
• for OE number: KIT 02
• Fitting Position: Front Axle both sides
• Weight [kg]: 1.6
• Control/Trailing Arm Type: Control Arm
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 04SKV111

• Fitting Position: Rear, inner, Lower Front Axle
• Material: Rubber/Metal
• Thickness [mm]: 80
• Weight [kg]: 0.486
• Required quantity: 2
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 64
• General Information: control arm bush
• Manufacturer: VIKA

• Mounting Type: Hydro Mount
• Fitting Position: both sides, Rear, Lower Front Axle
• Control/Trailing Arm Type: Control Arm
• Axle alignment required after fitting:
• Weight [kg]: 0.508
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle, Lower
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 65
• Width [mm]: 80
• SVHC: No SVHC present!
• Name: Puks
• Manufacturer: FAG

• new version:
• Thickness [mm]: 80
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 64
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Weight [kg]: 0.486
• for OE number: 4D0 407 183 AC
• Observe service information:
• Name: Puks - K„„ndmik VW P. A4/PASSA
• Manufacturer: FEB

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• new version:
• Thickness [mm]: 80
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 65
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Weight [kg]: 0.484
• Observe service information:
• Manufacturer: SWAG
• Name: SW 30 60 0041

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mounting Type: Hydro Mount
• Fitting Position: Front Axle, Lower, both sides, Rear
• Length [mm]: 80
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 65
• Quantity per axle: 2
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, Lower, both sides, Rear
• Mounting Type: Hydro Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 65
• Inner Diameter [mm]: 12
• Width [mm]: 80
• Quantity per axle: 2
• Name: Puks - K„„ndmik VW P. A4/A6/A8/PASSAT 97- DOLNEGO
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• General Information: repair kit for contrl arm rubber bush
• Manufacturer: VIKA