Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
Lisainfo: "Tootja: TEKNOROT
VW TRANSPOR.T4 9/90-
(kvaliteediklass: PJ)"
- Vehicle type: Caravelle
-
Fitting Position: outer,
Front Axle -
for OE number: 701 407 361,
701 407 361 b - Required quantity: 2
- Diameter [mm]: 25
- Lisainfo: VW TRANSPORTER T4
- Additional information: VW TRANSPORTER T4
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 19
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 20 tk
- Additional information: PAKENDIS 20 tk
-
Fitting Position: Front Axle Left,
Front Axle Right - Material: Rubber
- Inner Diameter [mm]: 19
- Manufacturer: MERTZ
-
Fitting Position: Front Axle Left,
Front Axle Right, inner - Inner Diameter [mm]: 23
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Quantity per packing unit: 10
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity per packing unit: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 23.5
- Shape: slotted
- Quantity per axle: 2
- Replace in pairs only:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 23
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Diameter 4 [mm]: 22.6
-
Installatsiooni pool: esisild vasakul,
esisild paremal -
Siseläbimõõt [mm]: 23,
1 - Manufacturer: 3RG
-
Installatsiooni pool: esisild vasakul,
esisild paremal - Siseläbimõõt [mm]: 16
- Manufacturer: 3RG
- Stabiliser Bar Diameter [mm]: 23
- Observe service information:
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 24
-
Name: Paigutus -
Kndmik VW P. T4 WEW. 90- 03 - Manufacturer: MAX
-
Fitting Position: Front Axle Right,
Front Axle Left - Inner Diameter [mm]: 24
-
Name: Puks -
Kndmik VW P. T4 - Manufacturer: MAX
- Quantity per packing unit: 10
- Diameter [mm]: 22.6
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Vehicle Identification Number (VIN) to: 70-
T- 200 000 - for PR number: 0AB
-
Fitting Position: inner,
Front Axle Left, Front Axle Right - Inner Diameter [mm]: 23
- Required quantity: 2
-
Name: Paigutus -
Kndmik VW P. T4 WEW. 90- 03 - Manufacturer: MEY
-
Fitting Position: Front Axle,
inner - Mounting Type: Rubber Mount
- Inner Diameter [mm]: 23
- SVHC: No SVHC present!
- Manufacturer: FAG
-
Fitting Position: Front,
outer, Left, Right - Diameter [mm]: 23.5
- Quantity per packing unit: 2
- Inner Diameter 1 [mm]: 20
- Outer Diameter 1 [mm]: 35
- Thickness 1 [mm]: 28.5
- Manufacturer: DELPHI
- Vehicle type: Multivan
- Quality: OE Performance
- Fitting Position: Front
- Colour: silver
- Weight [g]: 24
- Manufacturer: GATES
-
Fitting Position: Front Axle,
outer - Mounting Type: Rubber Mount
- Inner Diameter [mm]: 19
- SVHC: No SVHC present!
- Manufacturer: FAG
- Fitting Position: Front Axle both sides
- Required quantity: 2
- paired article number: VKDS 351032
- Height [mm]: 30
- Inner Diameter [mm]: 17.5
- Outer Diameter [mm]: 38.8
- Manufacturer: SKF ZAWIESZENIE
- Installatsiooni pool: ees
-
Pikkus (mm): 23,
1 - Üldine informatsioon: Rubber bush for stabilizer bar; 23.1mm
- Manufacturer: VIKA
- Fitting Position: Front Axle both sides
- Manufacturer: JP GROUP
-
Lisainfo: Bush,
stabilizer -
Additional information: Bush,
stabilizer
-
Fitting Position: Front Axle Left,
Front Axle Right, outer, Upper - Inner Diameter [mm]: 19
- Outer Diameter [mm]: 36
- Length [mm]: 29
- paired article number: 270571
- Weight [kg]: 0.03
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: ABS
-
Fitting Position: Right,
Left - Required quantity: 2
- Manufacturer: CORTECO
-
Installatsiooni pool: esisild vasakul,
esisild paremal, sees - Laagritüüp: Kummipuks
- Siseläbimõõt [mm]: 23
- Garantii: Garantii 3 aastat või kuni 75 000 km
- Manufacturer: METZGER
- Diameter 4 [mm]: 22.6
- Installatsiooni pool: Pealis
-
Laagritüüp: Kummi-
metalllaager - Name: Stabilizer mount left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
VWTRANSPORT.(T4),90-
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
VWTRANSPORT.(T4),90-
(kvaliteediklass: PJ)"
- Quantity per packing unit: 5
- Mounting Type: Rubber Mount
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 701411041D
- Fitting Position: Front
- Weight [g]: 25
- Name: IM 32339
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
-
Vehicle Identification Number (VIN) from: 70-
T- 200 001 - for PR number: 0AB
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 23
- Outer Diameter [mm]: 34
- Stabiliser Bar Diameter [mm]: 24
- Height [mm]: 38
- Required quantity: 2
-
Name: Paigutus -
Kndmik VW P. T4 WEW. 90- 03 23, 5MM - Manufacturer: MEY
- for PR number: 0AC
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 27
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Installatsiooni pool: Esisild
- Siseläbimõõt [mm]: 23
- Välisläbimõõt [mm]: 34
- Laius (mm): 37
- vajaminev tükihulk: 2
- Laagritüüp: Kummipuks
- Name: ALT 82260PAAL
- Manufacturer: ALTE AUTOMOTIVE
- Stabiliser Bar Diameter [mm]: 23.5
- Inner Diameter [mm]: 23
- Fitting Position: Front Axle
- Weight [kg]: 0.03
-
Name: Paigutus -
Kndmik VW P. T4 WEW. 90- 03 - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) from: 70-
T- 199999 -
Installatsiooni pool: esisild vasakul,
esisild paremal - Laagritüüp: Kummipuks
- Siseläbimõõt [mm]: 19
- Garantii: Garantii 3 aastat või kuni 75 000 km
- Manufacturer: METZGER
-
Installatsiooni pool: esisild vasakul,
esisild paremal - Manufacturer: 3RG
- Outer Diameter [mm]: 39
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 25
- Required quantity: 4
- Weight [kg]: 0.03
-
Name: Paigutus -
Kndmik VW T. T4 - Manufacturer: TED
- Stabiliser Bar Diameter [mm]: 23
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 24
- Required quantity: 2
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Vehicle Identification Number (VIN) to: 70-
T- 199 999 - Fitting Position: Front Axle both sides
- Inner Diameter [mm]: 22.5
- Weight [kg]: 0.026
- Length [mm]: 30
- Manufacturer: RTS
- Fitting Position: Front Axle both sides
- Required quantity: 2
- Stabiliser Bar Diameter [mm]: 27
- paired article number: VKDS 351017
- Name: SK VKDS351017
- Manufacturer: SKF
-
Fitting Position: Front Axle Left,
Front Axle Right, inner - Suspension: for vehicles with heavy duty suspension
- Inner Diameter [mm]: 27
- Outer Diameter [mm]: 30
- Length [mm]: 31
- paired article number: 271133
- Weight [kg]: 0.02
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: ABS
-
Fitting Position: Front Axle Left,
Front Axle Right, inner - Suspension: for vehicles without heavy duty suspension
- Inner Diameter [mm]: 24
- Outer Diameter [mm]: 34
- Length [mm]: 31
- paired article number: 270570
- Weight [kg]: 0.03
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: ABS
-
for PR number: 0AC,
0J4, F5H -
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 27
- Stabiliser Bar Diameter [mm]: 27
- Required quantity: 2
- Manufacturer: MEY
Name: Paigutus - Kndmik VW P. T4 WEW. 90-03 27MM (WZMOC. )
- Vehicle Identification Number (VIN) to: ******70*3*250000
- Suspension: for vehicles with reinforced stabiliser bar
- Stabiliser Bar Diameter [mm]: 27
- for PR number: 0AC
- Width [mm]: 30
- Thickness [mm]: 35
- Inner Diameter [mm]: 27
- Colour: white
- Fitting Position: Front Axle
- Weight [kg]: 0.2
-
Name: Paigutus -
Kndmik VW P. T4 WEW. 90- 03 - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Vehicle Identification Number (VIN) to: ******70*3*250000
- Suspension: for vehicles with reinforced stabiliser bar
- Stabiliser Bar Diameter [mm]: 27
- for PR number: 0AC
- Width [mm]: 30
- Thickness [mm]: 35
- Inner Diameter [mm]: 27
- Colour: white
- Fitting Position: Front Axle
- Weight [kg]: 0.2
- Name: SW 32 92 3424
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Colour: red
-
Fitting Position: Rear Axle,
outer, inner - Weight [kg]: 0.035
- Shore-A hardness value, base body: 80
- Supplementary Article/Info 2: with grease cap
- Required quantity: 4
- Outer Diameter [mm]: 39
- Inner Diameter [mm]: 25
-
Material: PU
(Polyurethane) -
Name: Paigutus -
Kndmik VW T. T4 91 !!!POLIURETAN!!! - Manufacturer: TED
-
Fitting Position: Front Axle,
outer - Quantity per axle: 2
- Manufacturer: LEMFORDER
- Name: LMI 1768202
SVHC: No information available, please contact the manufacturer!
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks