• Vehicle Identification Number (VIN) from: 70-X-053925
• Number of pins: 4
• Colour Coding: green
• Manufacturer: JP GROUP
• Lisainfo: Sender for water temperature gauge 4 pins
• Additional information: Sender for water temperature gauge 4 pins

• Vehicle Identification Number (VIN) to: F 70-X-053 924
• Number of pins: 4
• Switch Point [°C]: 88, 93
• Colour: blue, white
• Lisainfo: Thermo switch for cooling system, 93/88 C
• Additional information: Thermo switch for cooling system, 93/88 C

• Number of pins: 3
• Connector Shape: angular
• Lisainfo: Distance sensor
• Additional information: Distance sensor

• General Information: temperature sensor
• Manufacturer: VIKA

• Vehicle Equipment: for vehicles with automatic climate control
• Heating/Cooling: for vehicles with extra heating
• Colour Coding: black/green
• Connector Shape: rectangular
• Number of pins: 2
• Outer Diameter [mm]: 20
• for OE number: 1669949
• Manufacturer: DELLO AUTOMEGA

• for OE number: 1100619
• Manufacturer: KAMOKA

• Housing Colour: red
• Manufacturer: KAMOKA

• Engine Code: AHY
• Vehicle Equipment: for vehicles with parking heater
• Colour Coding: red
• Number of pins: 2
• Temperature range from [°C]: 55
• Temperature range to [°C]: 65
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Fabrication Number: ECT-AU-004
• Number of pins: 4
• Colour Coding: green
• Connector Shape: oval
• Manufacturer: NTY

• Number of pins: 2
• Switch Point [°C]: 55, 65
• Supplementary Article/Info 2: with seal ring
• Housing Colour: brown
• Switch point from [°C]: 65
• Switch point to [°C]: 55
• Weight [kg]: 0.027
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) from: 70-3-000 001, 70-4-000 001
• Vehicle Identification Number (VIN) to: 70-3-250 000, 70-4-099 000
• Number of pins: 4
• Colour: green
• Manufacturer: DELLO AUTOMEGA

• Engine Code: AHY
• Number of pins: 4
• Number of connectors: 4
• Manufacturer: 3RG

• Quantity: 1
• Vehicle Identification Number (VIN) to: 70-X-080 000
• Vehicle Identification Number (VIN) from: 70-X-080 001
• Colour Coding: green
• Weight [kg]: 0.02
• Required quantity: 1
• Number of connectors: 2
• General Information: temperature sensor
• Manufacturer: VIKA

• Housing Colour: black
• Number of pins: 4
• Spanner Size: 0
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: DLP

• Diameter [mm]: 26
• Length [mm]: 35
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• for OE number: 251 919 501 D
• Housing Colour: black
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: D Shape
• Number of pins: 4
• for OE number: 059919501A
• Supplementary Article/Info 2: with mounting parts
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Number of pins: 4
• Switch Point [°C]: 105, 112
• Manufacturer: JP GROUP
• Lisainfo: Thermo switch for cooling system, 105/112 C
• Additional information: Thermo switch for cooling system, 105/112 C

• Required quantity: 1
• Engine Code: AHY
• Trim Level: Standheizung
• Number of pins: 2
• Switch Point [°C]: 55, 65
• Colour: red
• Supplementary Article/Info 2: with seal ring
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Diameter [mm]: 20
• Number of pins: 2
• Manufacturer: ERA

• Quantity: 1
• Vehicle Identification Number (VIN) from: 70-X-053 925
• Colour: green
• Plug Type ID: 4
• Weight [kg]: 0.02
• Required quantity: 1
• Outer Diameter [mm]: 20
• Number of connectors: 4
• General Information: temperature sensor; green; 4 pins
• Manufacturer: VIKA

• Vehicle Identification Number (VIN) from: 70-X-053925
• Colour Coding: green
• Connector Shape: oval
• Sensor Type: NTC Sensor
• Number of pins: 4
• for OE number: 059 919 501A, 1 124 770
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: NTC Sensor
• Colour: black
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Number of connectors: 4
• Weight [kg]: 0.038
• Supplementary Article/Supplementary Info: with seal, with retaining spring
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB
• Additional information: FE32510
• Lisainfo: FE32510

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: rectangular
• Number of pins: 4
• Temperature range from [°C]: 89
• Temperature range to [°C]: 97
• for OE number: 1669990
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Switch Point [°C]: 106, 102
• Connector Shape: rectangular
• Colour Coding: green
• Number of pins: 4
• Fitted Diameter [mm]: 20
• Temperature range from [°C]: 102
• Temperature range to [°C]: 112
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of connectors: 4
• Weight [kg]: 0.038
• Supplementary Article/Supplementary Info: with seal, with retaining spring
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: AHY
• Number of pins: 4
• Colour: green
• Corresponds to the original part in colour: black
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Vehicle Identification Number (VIN) to: 70-X-053924
• Colour Coding: white/blue
• Connector Shape: rectangular
• Temperature range to [°C]: 93
• Temperature range from [°C]: 88
• Number of pins: 4
• Fitted Diameter [mm]: 20
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) from: 70-X-053925
• Colour Coding: blue
• Supplementary Article/Info 2: with seal ring
• Fitted Diameter [mm]: 20
• Temperature range from [°C]: 88
• Temperature range to [°C]: 93
• Connector Shape: angular
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: HAN
• Lisainfo: 111 396 HP
• Additional information: 111 396 HP

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Required quantity: 1
• Engine Code: AHY
• Vehicle Identification Number (VIN) from: 70-X-053 925
• Number of pins: 4
• Supplementary Article/Info 2: with seal ring
• Colour: green
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Vehicle Identification Number (VIN) from: 70-X-053 925
• Sensor Type: NTC Sensor
• Supplementary Article/Info 2: without seal ring
• Colour: green
• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Vehicle Identification Number (VIN) from: 70-X-053 925
• Number of pins: 4
• Colour: green
• Supplementary Article/Supplementary Info: with seal
• Quality: IAM
• Article number of recommended accessories: 0905458
• Power [W]: 0.06
• Manufacturer: METZGER

• Number of pins: 4
• Temperature range to [°C]: 95
• Manufacturer: ERA

• Vehicle Identification Number (VIN) to: 70-Y-200 000
• Voltage [V]: 12
• Number of pins: 3
• Manufacturer: DELLO AUTOMEGA

Vehicle Identification Number (VIN) from: 70-2-000 001, 70-Y-000 001, 70-XH051 760, 70-XX053 083, 70-XX067 240 Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles

• Number of pins: 3
• Connector Shape: rectangular
• Weight [kg]: 0.04
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Housing Colour: black
• Number of pins: 4
• Colour Coding: black, blue
• Switch point from [°C]: 100
• Switch point to [°C]: 95
• Weight [kg]: 0.028
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Weight [kg]: 0.017, 0.027
• Supplementary Article/Supplementary Info: with seal
• for OE number: 059 919 501 A
• Colour Coding: green
• Spring Design: Retaining Spring
• Number of pins: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: Automatic Transmission
• Manufacturer: DELLO AUTOMEGA

• Number of pins: 4
• Supplementary Article/Supplementary Info: with seal
• Supplementary Article/Info 2: with clamp holder
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Transmission Type: 4-Speed Automatic Transmission
• Number of pins: 2
• Name: ANDUR,KIIRUS
• Manufacturer: MAX
• Lisainfo: 095927321C/MG
• Additional information: 095927321C/MG

• Vehicle Equipment: for vehicles with automatic transmission
• Connector Shape: oval
• Number of pins: 3
• Colour: black
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Vehicle Equipment: for vehicles with manual transmission
• Connector Shape: rectangular
• Number of pins: 3
• Colour: black
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Quantity: 1
• Connector Shape: rectangular
• Number of pins: 3
• General Information: distance sensor
• Manufacturer: VIKA

Vehicle Identification Number (VIN) from: 70-1-000 001, 70-2-000 001, 70-XH051 760, 70-XX053 083, 70-XX067 240, 70-Y-000 001, 70-YH094 481, 70-YX088 756 Vehicle Identification Number (VIN) to: 70-1-200 000, 70-X-200 000, 70-XH051 759, 70-XH250 000, 70-XX053 082, 70-XX067 239, 70-XX250 000, 70-Y-200 000, 70-YH094 480, 70-YX088 755

• Quantity: 1
• Outer Diameter [mm]: 20
• Weight [kg]: 0.02
• Number of connectors: 4
• Colour: green
• Required quantity: 1
• General Information: coolant temperature sensor
• Manufacturer: BORSEHUNG

• Transmission Type: 4-Speed Automatic Transmission
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 2
• Weight [kg]: 0.02
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Sensor Type: NTC Sensor
• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY
• Lisainfo: 1008100007
• Additional information: 1008100007

• Sensor Type: NTC Sensor
• Mounting Type: Clipped
• Connector Shape: rectangular
• Number of pins: 4
• Socket colour: black
• for OE number: 1097757
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Vehicle Identification Number (VIN) to: 70-X-053 924
• Sensor Type: NTC Sensor
• Supplementary Article/Info 2: without seal ring
• Colour: blue, white
• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Transmission Type: 4-Speed Automatic Transmission
• Alternatively:
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Weight [kg]: 0.018
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) to: 70-X-053924
• Cable insulation material: Silicone
• Cable Length [mm]: 500
• Manufacturer Restriction: VAG
• Number of pins: 2
• Cable Cross Section [mm²]: 1
• Contact surface: Tin-plated
• Socket Width [mm]: 2.8
• Supplementary Article/Supplementary Info: with socket housing, with seal
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, numbrivalgustus
• Manufacturer: HBE

• Number of pins: 4
• Housing Colour: blue
• Manufacturer: FAE

• Fitting Position: Engine Block
• Number of pins: 3
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Connector Shape: rectangular
• Shape: angled
• Supplementary Article/Info 2: with cable
• Overall Length [mm]: 263
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 4
• Weight [kg]: 0.031
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: Inductive Sensor
• Number of pins: 3
• Voltage [V]: 12
• Name: Andur, v„ntvoll
• Manufacturer: MAX

• Manufacturer Restriction: VAG
• Number of pins: 3
• Cable Length [mm]: 200
• Socket Width [mm]: 1.5
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Contact surface: Gold-plated
• Cable Cross Section [mm²]: 0.75
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, rattap””rete andur
• Manufacturer: HBE

• Vehicle Identification Number (VIN) from: 70-X-000001
• Number of pins: 3
• Connector Shape: D Shape
• Supplementary Article/Info 2: with seal ring
• Number of mounting bores: 3
• Housing Type: Aluminium Housing
• Housing material: Plastic, Polyamid 6.6
• Housing Colour: black
• Vehicle Equipment: for vehicles with oil level sensor
• for OE number: 1 119 169, 1J0 907 660B
• Observe system fill quantity:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

Manufacturer: DELLO AUTOMEGA

• for OE number: 1J0 907 660
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Number of pins: 3
• Connector Shape: D Shape
• Number of mounting bores: 3
• Height [mm]: 83
• Fitting Depth [mm]: 52
• for OE number: 1J0 907 660 B
• Name: Andur,Mootoriolitase
• Manufacturer: MD

• Cable Length [mm]: 190
• Number of pins: 3
• Fitting Depth [mm]: 40
• Manufacturer: ERA

• Transmission Type: 4-Speed Automatic Transmission
• Number of connectors: 2
• Weight [kg]: 0.018
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Manufacturer: MAGNETI MARELLI

• Engine Code: AHY
• Number of pins: 4
• Colour: blue, white
• Warn Temperature [°C]: 100
• Name: EP 1.830.536
• Manufacturer: EPS

• Operating voltage [V]: 12
• Sensor Type: Active sensor
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Manufacturer: JP GROUP
• Lisainfo: Oil level sensor
• Additional information: Oil level sensor

• Vehicle Identification Number (VIN) from: 70-X-053 925
• Number of connectors: 4
• Fitting Depth [mm]: 20
• Manufacturer: BERU BY DRIV

• Number of pins: 3
• Connector Shape: rectangular
• Sensor Type: Inductive Sensor
• Cable Length [mm]: 165
• for OE number: 075 906 433 C
• Manufacturer: MEAT&DORIA

• Number of connectors: 7
• Weight [kg]: 0.12
• Name: LšLITI,KŽIK
• Manufacturer: FEB

Transmission Type: 4-Speed Automatic Transmission, for automatic transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: 4-Speed Automatic Transmission
• Voltage [V]: 12
• Weight [kg]: 0.07
• Operating Mode: Electric
• Number of pins: 7
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 96SKV003

• Fabrication Number: ECP-VW-012
• Manufacturer: NTY

• Transmission Type: 4-Speed Automatic Transmission
• Number of pins: 7
• Weight [kg]: 0.045
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 01.1999
• Vehicle Identification Number (VIN) from: 70-YH-000 949
• Quality: IAM
• Manufacturer: METZGER

• Construction Year from: 01.1999
• Alternatively:
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Weight [kg]: 0.1
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.