• Fitting Position: Front Axle
• Rod/Strut: Coupling Rod
• Diameter [mm]: 15
• Length [mm]: 75
• Net weight [kg]: 0.24
• Name: Ootshoovad - K„„ndmik VW P. POLO/L
• Manufacturer: NK

• Fitting Position: Front Axle
• Material: Rubber
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38
• Height [mm]: 14
• Manufacturer: DELLO AUTOMEGA

• Quantity per packing unit: 10
• Mounting Type: Rubber Mount
• Fitting Position: Front Axle both sides
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle, at axle link
• Inner Diameter [mm]: 11
• Weight [kg]: 0.016
• Required quantity: 4
• Name: Kinnitus,stabilisaatori otsavarras
• Manufacturer: TED

• Quantity per packing unit: 10
• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Rubber Mount
• Weight [kg]: 0.04
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle Right, Front Axle Left
• Inner Diameter [mm]: 10
• Name: Paigutus - K„„ndmik VW P. GOLF/POLO 83-
• Manufacturer: MAX

• Stabiliser Diameter [mm]: 20
• for PR number: 0AD
• Fitting Position: Front Axle Right, Front Axle Left
• Rod/Strut: Coupling Rod
• Weight [kg]: 0.02
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38
• Manufacturer: 3RG

• Fitting Position: Front Axle, Right, Left
• Vehicle Identification Number (VIN) from: 6N-Y-500 001
• Vehicle Identification Number (VIN) to: 6N-2-010 000
• Outer Diameter [mm]: 40
• Inner Diameter [mm]: 10
• Weight [kg]: 0.01
• Manufacturer: CORTECO

• for PR number: 0AB
• Stabiliser Diameter [mm]: 18
• Fitting Position: Front Axle Left, Front Axle Right
• Rod/Strut: Coupling Rod
• Inner Diameter [mm]: 18
• Manufacturer: JP-GROUP

Lisainfo: Connecting link for stabilizer, front, 18 mm stabilizer Additional information: Connecting link for stabilizer, front, 18 mm stabilizer

• Fitting Position: Front Axle
• Rod/Strut: Coupling Rod
• Inner Diameter [mm]: 16
• Manufacturer: DELLO AUTOMEGA

• Length [mm]: 60
• Rod/Strut: Coupling Rod
• Fitting Position: Front Axle
• Fabrication Number: ZLP-VW-015
• Name: NTY ZLP-VW-015
• Manufacturer: NTY

• Fitting Position: Front Axle Left, Front Axle Right
• Rod/Strut: Coupling Rod
• Mounting Type: Rubber Mount
• Supplementary Article/Info 2: with fastening material
• Manufacturer: MERTZ

• Fitting Position: Front Axle Left, Front Axle Right
• Rod/Strut: Coupling Rod
• Length [mm]: 73
• Supplementary Article/Info 2: with nut
• Manufacturer: MERTZ

• for PR number: 0AB
• Fitting Position: Front Axle
• Rod/Strut: Coupling Rod
• Length [mm]: 73
• Inner Diameter [mm]: 16
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle Left, Front Axle Right
• for OE number: 6N0 411 315 CS1
• Rod/Strut: Push Rod
• Manufacturer: GSP

• Stabiliser Diameter [mm]: 20, 22
• for PR number: 0AD, 0AH
• Block Separation:
• Length [mm]: 96
• Thickness [mm]: 29
• Inner Diameter [mm]: 18
• Outer Diameter [mm]: 40
• Rod/Strut: Coupling Rod
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.131
• Observe service information:
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Ootshoovad - K„„ndmik VW P. POLO/LUPO 94- LE/PR 18MM BEZ GUMEK

• Diameter [mm]: 20, 22
• Fitting Position: Front Axle Right, Front Axle Left
• Rod/Strut: Suspension Rod
• Name: COC 49400131
• Manufacturer: CORTECO

• Fitting Position: Front Axle Left, Front Axle Right
• for OE number: 6N0 411 315 A
• Rod/Strut: Push Rod
• Manufacturer: GSP

• Stabiliser Diameter [mm]: 20, 22
• for PR number: 0AD, 0AH
• Block Separation:
• Length [mm]: 96
• Thickness [mm]: 29
• Inner Diameter [mm]: 18
• Outer Diameter [mm]: 40
• Rod/Strut: Coupling Rod
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.131
• Observe service information:
• Name: SW 32 92 3030
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, both sides
• Rod/Strut: Coupling Rod
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Stabiliser Diameter [mm]: 18
• for PR number: 0AB
• Inner Diameter [mm]: 18
• Material: Metal
• Rod/Strut: Coupling Rod
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.115
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Rod/Strut: Coupling Rod
• Length [mm]: 72
• Pipe Diameter [mm]: 10
• Manufacturer: KAMOKA

• Stabiliser Diameter [mm]: 18
• Fitting Position: Front Axle Right, Front Axle Left
• Rod/Strut: Coupling Rod
• Supplementary Article/Info 2: with fastening material
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for PR number: 0AH, 0AD
• Stabiliser Diameter [mm]: 22, 20
• Block Separation:
• Fitting Position: Front Axle Right, Front Axle Left
• Rod/Strut: Coupling Rod
• Length [mm]: 76
• Thread Size: M8x1,25
• Manufacturer: QUARO

Name: Ootshoovad - K„„ndmik VW P. POLO/LUPO 94- 18MM LE/PR

• Fitting Position: at axle link, Front Axle both sides
• Inner Diameter [mm]: 11
• Weight [kg]: 0.015
• Supplementary Article/Info 2: with grease cap
• Material: PU (Polyurethane)
• Rod/Strut: for coupling rod
• Colour: red
• Required quantity: 4
• Shore-A hardness value, base body: 80
• Manufacturer: TEDGUM

• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 74.5
• Rod/Strut: Push Rod
• Thread Size 1: M8X1,25
• Manufacturer: GSP ZAWIESZENIE

• Diameter [mm]: 18
• Fitting Position: Front Axle Left, Front Axle Right
• Rod/Strut: Coupling Rod
• Quantity Unit: Set
• Material: Steel
• Name: Stabilizer link left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Stabiliser Diameter [mm]: 18
• Rod/Strut: Coupling Rod
• Fitting Position: Front Axle
• Diameter [mm]: 18
• Manufacturer: MAX

Name: Ootshoovad - K„„ndmik VW P. POLO/LUPO 94- 18MM LE/PR

• Vehicle Identification Number (VIN) to: 6N-Y-050 000
• Fitting Position: Left, Right, Front Axle
• Required quantity: 2
• Weight [g]: 172
• Name: IM 37295
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle Left, Front Axle Right, outer
• Rod/Strut: Suspension Rod
• Diameter [mm]: 16
• Thread Size: MM8X1,25
• Manufacturer: OYODO

• for PR number: 0AH, 0AD
• Stabiliser Diameter [mm]: 22, 20
• Block Separation:
• Fitting Position: Front Axle Right, Front Axle Left
• Rod/Strut: Coupling Rod
• Length [mm]: 76
• Thread Size: M8x1,25
• Diameter [mm]: 18
• Manufacturer: MAX

Name: Ootshoovad - K„„ndmik VW P. POLO/LUPO 94- LE/PR 18MM KPL

• Fitting Position: Front Axle
• Stabiliser Diameter [mm]: 18
• Rod/Strut: Coupling Rod
• Width [mm]: 40
• Height [mm]: 60
• Manufacturer: DELPHI
• Name: DE TC2027

• Fitting Position: Front Axle Left, Front Axle Right, outer
• Length [mm]: 71
• Thread Size: MM8X1,25 RHT
• Diameter [mm]: 16
• Rod/Strut: Suspension Rod
• paired article number: 260141
• Weight [kg]: 0.16
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Rod/Strut: Coupling Rod
• Diameter [mm]: 18
• Length [mm]: 75
• Thread Size: M8x1,25
• Net weight [kg]: 0.19
• Manufacturer: NK

Name: Ootshoovad - K„„ndmik VW P. POLO/LUPO 94- LE/PR 18MM KPL

• Fitting Position: Front Axle
• Rod/Strut: Coupling Rod
• Length [mm]: 77
• Inner Diameter [mm]: 17
• Name: ALT 78555AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle
• Rod/Strut: Coupling Rod
• Supplementary Article/Supplementary Info: with accessories
• Length [mm]: 76
• Thread Size: M8x1,25
• Pipe Diameter [mm]: 10
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left, Front Axle Right
• Rod/Strut: Coupling Rod
• Length [mm]: 30
• Diameter [mm]: 16
• Material: Cast Steel
• Weight [kg]: 0.12
• Name: DY 30-88131
• Manufacturer: DYS

• Fitting Position: Front Axle
• Rod/Strut: Coupling Rod
• Thread Size: M8 x 1,25
• Length [mm]: 77
• Pipe Diameter [mm]: 14
• Inner Diameter [mm]: 18
• Name: ALT 80772AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle
• Stabiliser Diameter [mm]: 18
• Rod/Strut: Coupling Rod
• Inner Diameter [mm]: 16
• SVHC: No SVHC present!
• Name: Stabilisaator,Stabilisaator
• Manufacturer: FAG

• Fitting Position: Front Axle both sides
• Required quantity: 2
• paired article number: VKDS 341015
• Length [mm]: 77
• Bore Diameter [mm]: 17.7
• Rod/Strut: Coupling Rod
• Name: SK VKDS341015
• Manufacturer: SKF

• for PR number: 0AH, 0AD
• Stabiliser Diameter [mm]: 22, 20
• Block Separation:
• Fitting Position: Front Axle Right, Front Axle Left
• Rod/Strut: Coupling Rod
• Length [mm]: 76
• Thread Size 1: M8x1,25
• Required quantity: 2
• replacement in pairs recommended:
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation. Name: Ootshoovad - K„„ndmik VW P. POLO/LUPO 94- LE/PR 18MM KPL

• Stabiliser Diameter [mm]: 18
• for PR number: 0AB
• Length [mm]: 73
• Rod/Strut: Coupling Rod
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.1
• Supplementary Article/Supplementary Info: with lock nut
• Observe service information:
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Ootshoovad - K„„ndmik VW P. POLO/LUPO Z GUMAMI KPL.

• Fitting Position: Front Axle
• Weight [kg]: 0.166
• Rod/Strut: Coupling Rod
• Width [mm]: 40
• Height [mm]: 50
• max. length [mm]: 96
• Material: Steel
• Thread Size 1: M8x1,25
• Name: Stabilizer link left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VW POLO/LUPO/S.AROSA
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VW POLO/LUPO/S.AROSA
(kvaliteediklass: PJ)"

• Stabiliser Diameter [mm]: 20, 22
• for PR number: 0AD, 0AH
• Block Separation:
• Rod/Strut: Coupling Rod
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.161
• Supplementary Article/Supplementary Info: with rubber mounts
• Observe service information:
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Ootshoovad - K„„ndmik VW P. POLO/LUPO 94- LE/PR 18MM KPL

• for PR number: 0AB
• Stabiliser Diameter [mm]: 18
• Fitting Position: Front Axle Right, Front Axle Left
• Rod/Strut: Coupling Rod
• Length [mm]: 76
• Thread Size 1: M8x1,25
• Inner Diameter [mm]: 16
• Required quantity: 2
• replacement in pairs recommended:
• Name: Ootshoovad - K„„ndmik VW P. POLO/LUPO 16MM
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Stabiliser Diameter [mm]: 18
• Rod/Strut: Coupling Rod
• Fitting Position: Front Axle
• Material: Plastic
• Manufacturer: QUARO

Name: Ootshoovad - K„„ndmik VW P. POLO/LUPO 94- 18MM LE/PR

• Fitting Position: Front Axle both sides
• Rod/Strut: Coupling Rod
• Outer Diameter 1 [mm]: 17
• External Thread 2 [mm]: M8
• Length [mm]: 77
• Weight [kg]: 0.174
• Manufacturer: RTS

• Fitting Position: Front Axle both sides
• Required quantity: 2
• paired article number: VKDS 341014
• Rod/Strut: Coupling Rod
• Name: SK VKDS341014
• Manufacturer: SKF

• Fitting Position: Front Axle
• Stabiliser Diameter [mm]: 20, 22
• Block Separation:
• Rod/Strut: Coupling Rod
• Inner Diameter [mm]: 18
• SVHC: No SVHC present!
• Name: Stabilisaator,Stabilisaator
• Manufacturer: FAG

• Fitting Position: Front Axle Left, Front Axle Right
• Diameter [mm]: 16
• Weight [kg]: 0.2
• Rod/Strut: Coupling Rod
• Packaging length [cm]: 14.5
• Packaging width [cm]: 9.5
• Packaging height [cm]: 5
• Manufacturer: MONROE

• Stabiliser Diameter [mm]: 18
• Rod/Strut: Coupling Rod
• Fitting Position: Front Axle
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer! Name: Ootshoovad - K„„ndmik VW P. POLO/LUPO D/E 10/94- 18MM

• Fitting Position: Front Axle both sides
• Rod/Strut: Coupling Rod
• Length [mm]: 76
• Thread Size: M8x1,25
• Manufacturer: PROFIPOWER

• Fitting Position: Front Axle both sides
• Rod/Strut: Coupling Rod
• Length [mm]: 77
• Outer Diameter 1 [mm]: 17
• External Thread 2 [mm]: M8
• Manufacturer: PROFIPOWER

• Fitting Position: outer, Front Axle
• Material: PU (Polyurethane)
• Outer Diameter [mm]: 34
• Shore-A hardness value, base body: 90
• Supplementary Article/Info 2: with grease cap
• Inner Diameter [mm]: 15
• Required quantity: 2
• Weight [kg]: 0.028
• Colour: yellow
• Name: TG TED55210
• Manufacturer: TEDGUM