Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Construction Year from: 11.1990
-
Vehicle Identification Number (VIN) to: 80-
M- 100000 - Number of Cylinders: 4
- Manufacturer Restriction: Bosch
- Connector type: Pin
- Manufacturer: JP GROUP
- Lisainfo: Distributor cap
- Additional information: Distributor cap
- Manufacturer Restriction: BOSCH
- Resistor [kOhm]: 1
- Length [mm]: 37
- Height [mm]: 22
- Support plate diameter [mm]: 10.2
- Manufacturer: DELLO AUTOMEGA
-
Construction Year from: 10.1990,
11.1990 - Construction Year to: 11.1990
- Vehicle Identification Number (VIN) to: 80 M 100 000
- Block Separation:
- Vehicle Identification Number (VIN) from: 80 M 100 001
- Colour: red
- Weight [kg]: 0.023
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
for OE number: 26905207,
27905207 - Manufacturer: DELLO AUTOMEGA
- Construction Year from: 11.1990
-
Vehicle Identification Number (VIN) from: 80-
M- 100 001 - for OE number: 51905207
- Manufacturer: DELLO AUTOMEGA
- Manufacturer Restriction: System BOSCH
-
Resistor [Ohm]: 1,
000 - Material: Polyester
- Mounting Type: Plugged
- Support plate diameter [mm]: 10.2
- Manufacturer: BERU BY DRIV
- Lisainfo: BEREVL134
- Additional information: BEREVL134
- Engine Code: PY
- Manufacturer Restriction: Bosch
-
Resistance Rotor [Ohm]: 1,
000 - Name: EP 1.406.121R
- Manufacturer: EPS
- Construction Year from: 10.1990
- Construction Year to: 11.1990
- Vehicle Identification Number (VIN) to: 80 M 100 000
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Vehicle Identification Number (VIN) to: -
80M100000 - Distributor Number: 0237521029
- Manufacturer Restriction: System BOSCH
- Ignition Cable: Connector Type M4
- Manufacturer: BREMI
-
Vehicle Identification Number (VIN) to: -
80M100000 - Distributor Number: 0237521029
- Colour: black
- Weight [kg]: 0.031
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 055 905 207
- Manufacturer Restriction: BOSCH
- Weight [kg]: 0.094
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 11.1990
-
Vehicle Identification Number (VIN) to: 80-
M- 100 000 - Manufacturer Restriction: System BOSCH
- Material: Polyester
- Surface: Painted
-
Distributor/ Rotor: Connector Type,
saw teeth - Version: without shielding
- Manufacturer: BERU
-
Construction Year from: 10.1990,
11.1990 - Construction Year to: 11.1990
- Vehicle Identification Number (VIN) to: 80 M 100 000
- Block Separation:
- Vehicle Identification Number (VIN) from: 80 M 100 001
- Resistor [kOhm]: 1
- Manufacturer: BOSCH
- Engine Code: PY
- Manufacturer Restriction: Bosch
-
Vehicle Identification Number (VIN) to: 80-
M- 100000 - Name: EP 1.306.094
- Manufacturer: EPS
-
Vehicle Identification Number (VIN) from: 80M100001-
- Distributor Number: 0237521048
- Manufacturer Restriction: System BOSCH
- Distributor/ Rotor: Covered
- Ignition Cable: Connector Type M4
- Manufacturer: BREMI
- Additional information: BRE6027R
- Lisainfo: BRE6027R
- Construction Year from: 11.1990
-
Vehicle Identification Number (VIN) from: 80-
M- 100 001 - Manufacturer Restriction: System BOSCH
- Material: Polyester
- Mounting Type: Clipped
- Surface: inner painted
-
Distributor/ Rotor: Covered,
Connector Type, saw teeth - Manufacturer: BERU
- Lisainfo: BERVK407S
- Additional information: BERVK407S
- Engine Code: PY
- Manufacturer Restriction: Bosch
-
Vehicle Identification Number (VIN) from: 80-
M- 100001 - Name: EP 1.306.266
- Manufacturer: EPS
- Construction Year from: 10.1990
- Construction Year to: 11.1990
- Vehicle Identification Number (VIN) to: 80 M 100 000
- Number of Cylinders: 4
- Manufacturer: BOSCH
- Construction Year from: 11.1990
- Vehicle Identification Number (VIN) from: 80 M 100 001
- Number of Cylinders: 4
- Manufacturer: BOSCH
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks