• Thread Size: M10x1,0
• Colour: black
• Number of connectors: 1
• Weight [kg]: 0.019
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: 2E
• Number of pins: 2
• Connector Shape: rectangular
• Socket colour: blue
• Outer Diameter [mm]: 25.5
• Inner Diameter [mm]: 20
• for OE number: 025 906 041 A, 95VW-12A648-BA, A 002 542 07 18
• Manufacturer: MEAT&DORIA

• General Information: temperature sensor
• Manufacturer: VIKA

• Number of pins: 3
• Socket colour: blue
• Fabrication Number: ESS-AU-001
• Manufacturer: NTY

• Number of pins: 2
• Socket colour: black
• Connector Shape: rectangular
• External Thread [mm]: M 12x1,5
• Spanner Size: 19
• Manufacturer: MEAT&DORIA

for OE number: 13 62 1 711 371, 046 905 379, 37880-P5T-G00, 1430.80, 504366815

• Engine Code: 2E
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Engine Code: ADY
• Sensor Type: NTC Sensor
• Number of pins: 2
• Voltage [V]: 12
• Name: Andur,sisendohu temperatuur
• Manufacturer: MAX

• Engine Code: 2E
• Name: EP 1.830.086
• Manufacturer: EPS

• Engine Code: ADY
• Sensor Type: Active sensor
• for OE number: 06A 905 161 B
• Manufacturer: KAMOKA

• for OE number: 28 906 081, 95VW 12A697 DA
• Colour: black
• Number of pins: 2
• Connector Shape: rectangular
• Fabrication Number: ECT-AU-002
• Manufacturer: NTY

• Construction Year to: 09.1994
• Cable Length [mm]: 520
• Number of pins: 3
• Colour: blue, black
• Manufacturer: DELLO AUTOMEGA

• Construction Year to: 12.1993
• Engine Code: 2E
• Mounting Type: Plugged
• Voltage [V]: 12
• Resistor [Ohm]: 2,080, 322
• Supplementary Article/Supplementary Info: with seal
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Colour: blue
• Sensor Type: NTC Sensor
• Number of pins: 2
• Supplementary Article/Info 2: with retaining ring
• Corresponds to the original part in colour: blue
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009107551

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 2
• Housing Colour: blue
• Fitted Diameter [mm]: 20
• Manufacturer: FAE

• General Information: temperature sensor
• Manufacturer: VIKA

• Number of pins: 4
• Fitted Diameter [mm]: 20
• Manufacturer: FAE

• Number of pins: 2
• Connector Shape: rectangular
• Socket colour: black
• External Thread [mm]: M 12x1,5
• Manufacturer: ERA

• Number of pins: 2
• Connector Shape: rectangular
• Colour: black
• Mounting Type: Pressed
• for OE number: 028 906 081, 95VW 12A697 DA
• Manufacturer: MEAT&DORIA

• Engine Code: ADY
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Engine Code: ADY, AGG
• Voltage [V]: 12
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Engine Code: 2E
• Corresponds to the original part in colour: yellow, blue, black
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Number of pins: 3
• Connector Shape: rectangular
• Cable Length [mm]: 550
• for OE number: 054 905 377 G, 480EE-1002060
• Manufacturer: MEAT&DORIA

• Diameter [mm]: 90
• Length [mm]: 835
• Height [mm]: 37
• General Information: knock sensor
• Manufacturer: VIKA

• Engine Code: ADY
• Colour: black
• Number of pins: 2
• Weight [kg]: 0.058
• Manufacturer: ERA

• Cable Length [mm]: 520
• Number of pins: 3
• Weight [kg]: 0.08
• Manufacturer: ERA

• Engine Code: 2E
• Construction Year to: 09.1994
• Number of pins: 3
• Connector Shape: rectangular
• Number of mounting bores: 2
• Rotation Direction: Clockwise rotation
• Rated Voltage [V]: 5
• Supplementary Article/Info 2: without cable
• for OE number: 044 907 385 A
• Quality: OE EQUIVALENT
• Name: Andur,drosselklapiasend
• Manufacturer: MD

• Cable Length [mm]: 535
• Number of pins: 3
• Housing Colour: blue
• Lisainfo: Knock sensor
• Additional information: Knock sensor

• Number of pins: 3
• Colour: black
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Transmission Type: Manual Transmission
• Engine Code: 2E
• Number of pins: 3
• Operating Mode: Mechanical
• Rotation Direction: Clockwise rotation
• Name: ANDUR,DROSSELKLAPIASEND
• Manufacturer: DLP

• Plug housing design: Plug sleeve housing
• Manufacturer Restriction: BMW, Volvo, VAG
• Number of pins: 3
• Cable Length [mm]: 250
• Cable Cross Section [mm²]: 1
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• SVHC: No SVHC present!
• Manufacturer: HBE

Name: Kaabliparanduskomplekt, seadeelement- tulede ulatuse regul

• Engine Code: ADY
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009109281
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Colour: black
• Cable Length [mm]: 290
• Number of pins: 3
• Weight [kg]: 0.058
• Manufacturer: ERA

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Connector/Clamp: Connector may need adjustment
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-UV-000
• Manufacturer: NTY

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Length [mm]: 340
• Number of connectors: 3
• Colour: brown
• Weight [kg]: 0.69
• Name: DETONATSIOONIANDUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• General Information: fuel pressure regulator
• Manufacturer: BORSEHUNG

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Construction Year to: 10.1993
• Engine Code: 2E
• Voltage [V]: 12
• Number of circuits: 3
• Weight [kg]: 0.08
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV903

• Engine Code: 2E
• Vehicle Identification Number (VIN) from: 3A-RB176779, 3A-RE207369
• Length [mm]: 350
• Name: DETONATSIOONIANDUR
• Manufacturer: EPS

• Engine Code: 2E
• Construction Year from: 10.1990
• Construction Year to: 09.1994
• Colour: blue
• Name: DETONATSIOONIANDUR
• Manufacturer: BOS

• Engine Code: 2E
• Vehicle Identification Number (VIN) to: 3A-RB176778, 3A-RE207368
• Sensor Type: Piezoelectric Sensor
• Cable Length [mm]: 540
• Number of pins: 3
• Name: Detonatsiooniandur
• Manufacturer: MEY

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Construction Year to: 10.1993
• Engine Code: 2E
• Exhaust System: for pre-catalytic converter
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 13
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV913

• Engine Code: 2E
• Construction Year from: 10.1990
• Construction Year to: 09.1994
• Lambda Sensor: Regulating Probe, Planar probe
• Fitting Position: before catalytic converter
• Number of circuits: 3
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: 2E
• Construction Year from: 08.1993
• Construction Year to: 09.1994
• Lambda Sensor: Regulating Probe, Heated
• Catalytic Converter Type: for vehicles with catalytic converter
• Vehicle Identification Number (VIN) from: 3A-R-150000
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: ADY, AGG
• Construction Year from: 10.1994
• Construction Year to: 12.1995
• Lambda Sensor: Regulating Probe, Heated
• Catalytic Converter Type: for vehicles without catalytic convertor
• Block Separation:
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: AGG, ADY
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of circuits: 4
• Socket colour: black
• Connector Shape: D Shape
• Cable Length [mm]: 770
• Weight [kg]: 0.177
• for OE number: 021 906 265 R
• Thread Size: M18 x 1,5
• Length [mm]: 1,000
• Number of pins: 4
• Number of connectors: 4
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Exhaust System: before catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Cable Length [mm]: 550
• Number of pins: 3
• Housing Colour: blue
• Manufacturer: FAE

• Construction Year to: 07.1994
• Catalytic Converter Type: without catalytic convertor
• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 583
• Number of circuits: 4
• Weight [kg]: 0.15
• Resistor [Ohm]: 4.5
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

• Engine Code: 2E
• Construction Year to: 10.1993
• Transmission Type: Manual Transmission
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 3
• Weight [g]: 95
• Gross Weight [g]: 144
• Name: DN DOX-0116
• Manufacturer: DENSO
• Lisainfo: DOX-0116 DENSO
• Additional information: DOX-0116 DENSO

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor

• Engine Code: 2E
• Construction Year to: 10.1993
• Transmission Type: Manual Transmission
• Catalytic Converter Type: for vehicles with catalytic converter
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 3
• Weight [g]: 95
• Gross Weight [g]: 144
• Manufacturer: DENSO

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)"

• Engine Code: 2E
• Construction Year from: 01.1994
• Construction Year to: 09.1994
• Transmission Type: Manual Transmission
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 100
• Gross Weight [g]: 149
• Manufacturer: DENSO
• Name: DN DOX-0120

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)"

• Construction Year from: 10.1994
• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 885
• Number of circuits: 4
• Weight [kg]: 0.19
• Resistor [Ohm]: 2.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV599
• Manufacturer: ESEN SKV

• Construction Year to: 07.1994
• Exhaust System: for pre-catalytic converter
• Vehicle Identification Number (VIN) to: 3A-R-300 000
• Engine Code: 2E
• Cable Length [mm]: 985
• Lambda Sensor: Finger probe, Heated
• Name: DE ES11010-12B1
• Manufacturer: DELPHI

• Construction Year from: 10.1994
• Engine Code: AGG, ADY
• Block Separation:
• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Cable Length [mm]: 885
• Manufacturer: DELPHI
• Name: DE ES10967-12B1

• Resistor [Ohm]: 2.1
• Conductor Number: 4
• Length [mm]: 885
• Number of circuits: 4
• Cable Length [mm]: 885
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Engine Code: 2E
• Construction Year to: 07.1994
• Vehicle Identification Number (VIN) to: 3A-R-300 000
• Catalytic Converter Type: without catalytic convertor
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: ADY, AGG
• Construction Year from: 10.1994
• Construction Year to: 12.1995
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Catalytic Converter Type: for vehicles without catalytic convertor
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 10.1994
• Engine Code: ADY, AGG
• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: 2E
• Construction Year from: 08.1993
• Construction Year to: 09.1994
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Catalytic Converter Type: for vehicles with catalytic converter
• Vehicle Identification Number (VIN) from: 3A-R-150 000
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 01.1994
• Engine Code: ADY, AGG
• Number of pins: 3
• Housing Type: with housing
• Lisainfo: Air meter
• Additional information: Air meter

• Catalytic Converter Type: for vehicles with catalytic converter
• Engine Code: ADY, AGG
• Lambda Sensor: Finger probe
• Thread Size: M18 x 1,5
• Cable Length [mm]: 950
• Number of pins: 4
• Name: Lambda andur
• Manufacturer: MEY

• Engine Code: 2E
• Construction Year from: 10.1990
• Construction Year to: 07.1993
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Catalytic Converter Type: for vehicles with catalytic converter
• Number of circuits: 3
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: ADY, AGG
• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 3
• Weight [kg]: 0.46
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 07SKV144
• Manufacturer: ESEN SKV

• Engine Code: 2E
• Construction Year from: 10.1990
• Construction Year to: 09.1994
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Catalytic Converter Type: for vehicles without catalytic convertor
• Number of circuits: 3
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: 2E
• Rotation Direction: Anticlockwise rotation
• Number of pins: 3
• Manufacturer: ERA

• Engine Code: ADY, AGG
• Construction Year from: 10.1994
• Lambda Sensor: Regulating Probe
• Length [mm]: 1,000
• Number of pins: 4
• Technical Information Number: Universal 77008
• Fitting Position: before catalytic converter
• Manufacturer: FAE

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Engine Code: ADY, AGG
• Housing Type: without housing
• Number of pins: 3
• Plug Type: Male
• Housing Colour: black/silver
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: DLP

• Recommended additional repairs: Air Filter
• General Information: air mass meter
• Manufacturer: VIKA

• Length [mm]: 340
• Number of connectors: 3
• Colour: brown