• Number of pins: 2
• Colour: blue
• Lisainfo: Temperature sensor for cooling system, 2 pins
• Additional information: Temperature sensor for cooling system, 2 pins

• Number of connectors: 2
• Colour Coding: green
• Weight [kg]: 0.02
• Manufacturer: SWAG
• Name: SW 30 91 8666

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• General Information: temperature sensor
• Manufacturer: VIKA

• Number of connectors: 2
• Material: Plastic
• Weight [kg]: 0.01
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 2
• Colour Coding: green
• Weight [kg]: 0.02
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: AAA
• Housing Colour: white
• Temperature range to [°C]: 150
• Thread Size: M10x1
• Spanner Size: 13
• Corresponds to the original part in colour: white
• Name: EP 1.830.154
• Manufacturer: EPS

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• for OE number: 251919501A
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Sensor Type: NTC Sensor
• Mounting Type: Clipped
• Connector Shape: rectangular
• Number of pins: 2
• for OE number: 025906041A
• Supplementary Article/Info 2: with mounting parts
• Manufacturer: NRF

• Diameter [mm]: 20
• Number of pins: 2
• Manufacturer: ERA

• Number of connectors: 2
• Colour: blue
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with retaining spring, with seal
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Equipment: for vehicles with automatic climate control
• Engine Code: AAA
• Housing Colour: black
• Number of pins: 2
• Spanner Size: 0
• Manufacturer: DELPHI

• Connector Shape: rectangular
• Material: Brass
• Number of pins: 2
• Plug Type: Male
• Sensor Type: NTC Sensor
• Spanner Size: 20 mm
• Thread Size: not have
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Engine Code: AAA
• Housing Colour: blue
• Name: EP 1.830.101
• Manufacturer: EPS

• Housing Colour: red
• Number of pins: 2
• Spanner Size: 0
• Manufacturer: DELPHI
• Name: DE TS10286

• Thread Size: 20 mm
• Manufacturer: VERNET

• Connector Shape: rectangular
• Material: Brass
• Number of pins: 2
• Plug Type: Male
• Sensor Type: NTC Sensor
• Spanner Size: 20 mm
• Thread Size: not have
• Name: NI 207024
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Connector Shape: rectangular
• Material: Brass
• Number of pins: 1
• Plug Type: Male
• Sensor Type: NTC Sensor
• Spanner Size: 14 mm
• Thread Size: M10x1,0
• Name: NI 207058
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Switch Point [°C]: 100
• Thread Size: 20 mm
• Manufacturer: VERNET

• Engine Code: AAA
• Colour Coding: green
• Manufacturer: EPS

• Engine Code: AAA
• Thread Size: M10 x 1
• Spanner Size: 13
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 1
• Weight [kg]: 0.02
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: NTC Sensor
• Mounting Type: Clipped
• Connector Shape: rectangular
• Number of pins: 4
• Socket colour: black
• for OE number: 1097757
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Mounting Type: Plugged
• Voltage [V]: 12
• Resistor [Ohm]: 1,000, 148
• Supplementary Article/Supplementary Info: with seal
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Colour: black
• Sensor Type: NTC Sensor
• Number of pins: 2
• Supplementary Article/Info 2: with retaining ring
• Colour Coding: green
• Corresponds to the original part in colour: black
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009107241
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Supplementary Article/Supplementary Info: with seal
• Voltage [V]: 12
• Number of connectors: 1
• Corresponds to the original part in colour: white
• Colour: black
• Spanner Size: 13
• Sensor Type: NTC Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009107691

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• General Information: temperature sensor
• Manufacturer: VIKA

• Required quantity: 2
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Fitting Position: Front Axle
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 475
• Manufacturer: DELPHI
• Name: DE SS20020

• Fitting Position: Front Axle Left, Front Axle Right
• Number of pins: 2
• Cable Length [mm]: 470
• Sensor Type: Passive sensor
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0464

• Number of pins: 1
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Instruments: with water temperature gauge
• Housing Colour: blue, black
• Number of pins: 4
• Spanner Size: 0
• Manufacturer: DELPHI
• Name: DE TS10274

• Engine Code: AAA
• Housing Colour: blue
• Number of pins: 4
• Spanner Size: 0
• Manufacturer: DELPHI
• Name: DE TS10275

• Fitting Position: Front, Front Axle
• Required quantity: 2
• Model Year to: 2000
• Braking/Drive Dynamics: for vehicles with ABS
• Rated Voltage [V]: 12
• Weight [kg]: 0.065
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 1,095
• Manufacturer: DELPHI
• Name: DE SS20028
• Quality class: PJ

• Quantity: 2
• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Rated Voltage [V]: 12
• Weight [kg]: 0.105
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of connectors: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.6
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 263000
• Height [mm]: 22.5
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Number of connectors: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.5
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Overall Length [mm]: 1,165
• Length [mm]: 28
• Sensor Type: Passive sensor
• Socket colour: black
• Cable Length [mm]: 1,090
• paired article number: 30027
• Weight [kg]: 0.12
• Manufacturer: A.B.S.

• Voltage [V]: 12
• Number of pins: 3
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: with cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Length [mm]: 213
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PG013114481
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Vehicle Identification Number (VIN) from: 263000
• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Number of pins: 3
• Manufacturer: DELPHI

• Construction Year to: 02.2000
• Manufacturer: BOSCH

• Cable Length [mm]: 361
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11020

• Fitting Position: Rear Axle Right, Rear Axle Left
• Number of pins: 2
• Sensor Type: Passive sensor
• Cable Length [mm]: 1,090
• Manufacturer: AUTOFREN SEINSA

• Transmission Type: 4-Speed Automatic Transmission
• Number of connectors: 2
• Weight [kg]: 0.018
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 43
• Outer Diameter [mm]: 25.5
• Number of connectors: 4
• Colour Coding: blue
• Weight [kg]: 0.025
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: AAA
• Housing Colour: blue
• Warn Temperature [°C]: 100
• Name: EP 1.830.536
• Manufacturer: EPS

• Construction Year to: 02.2000
• Fitting Position: Front Axle
• Sensor Type: Passive sensor
• Supplementary Article/Info 2: with cable
• Overall Length [mm]: 550
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Manufacturer: BOSCH

• Construction Year to: 02.2000
• Fitting Position: Rear Axle
• Sensor Type: Passive sensor
• Supplementary Article/Info 2: with cable
• Overall Length [mm]: 1,150
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Manufacturer: BOSCH

• General Information: fuel pressure regulator
• Manufacturer: BORSEHUNG

• Engine Code: AAA
• Housing Colour: white
• Length [mm]: 570
• Name: EP 1.957.015
• Manufacturer: EPS

• Engine Code: AAA
• Housing Colour: brown
• Length [mm]: 350
• Name: EP 1.957.064
• Manufacturer: EPS

• Engine Code: AAA
• Length [mm]: 370
• Manufacturer: EPS

• Required quantity: 2
• Voltage [V]: 12
• Resistor [Ohm]: 1,130
• Cable Length [mm]: 1,070
• Sensor Type: Inductive Sensor
• Fitting Position: Rear Axle
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Braking/Drive Dynamics: for vehicles with ABS
• Fitting Position: Right, Left, Rear Axle
• Cable Length [mm]: 1,130
• Manufacturer: SNR /NTN-SNR/

• Braking/Drive Dynamics: for vehicles with ABS
• Fitting Position: Right, Left, Front Axle
• Cable Length [mm]: 525
• Manufacturer: SNR

• Construction Year to: 01.1998
• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Vehicle Identification Number (VIN) from: 7M-V 021 999
• Vehicle Identification Number (VIN) to: 7M-W 050 000
• Cable Length [mm]: 740
• Manufacturer: DELPHI

• Fabrication Number: ECP-VW-012
• Manufacturer: NTY
• Name: NTY ECP-VW-012

• Required quantity: 2
• Fitting Position: Rear Axle
• Length [mm]: 1,031
• Wear Warning Contact: not prepared for wear indicator
• MAPP code available:
• Manufacturer: ATE

• Engine Code: AAA
• Vehicle Identification Number (VIN) from: 263000
• Manufacturer: EPS

• Construction Year from: 12.1997
• Construction Year to: 02.2000
• Engine Number from: AAA 263 000
• Manufacturer: BOSCH

• Required quantity: 2
• Fitting Position: Rear Axle
• Length [mm]: 1,031
• Wear Warning Contact: prepared for wear indicator
• MAPP code available:
• Manufacturer: ATE

• Engine Number from: 263 000
• Length [mm]: 50
• Number of connectors: 3
• Weight [kg]: 0.025
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 02.1998, 02.2000
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) from: 7M..T..021 999, 7M..W..050 001
• Vehicle Identification Number (VIN) to: 7M..W..050 000
• Block Separation:
• Construction Year from: 03.1998
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986505

• Vehicle Identification Number (VIN) to: 7M-3-030000
• Fitting Position: Rear Axle Right
• Length [mm]: 1,026
• Wear Warning Contact: prepared for wear indicator
• MAPP code available:
• Manufacturer: ATE

• Fitting Position: Front Axle
• Required quantity: 2
• Length [mm]: 479
• Wear Warning Contact: not prepared for wear indicator
• MAPP code available:
• Manufacturer: ATE

• Fitting Position: Front Axle
• Required quantity: 2
• Length [mm]: 479
• Wear Warning Contact: prepared for wear indicator
• MAPP code available:
• Manufacturer: ATE

• Construction Year to: 02.2000
• Manufacturer: BOSCH

• Braking/Drive Dynamics: for vehicles with ESP
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Fitting Position: Brake Booster
• Brake System: ATE
• Manufacturer: ATE

• Construction Year to: 02.1998
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) from: 7M..T..021 999
• Vehicle Identification Number (VIN) to: 7M..W..050 000
• Number of circuits: 4
• Overall Length [mm]: 750
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH
• Name: BS 0258003842

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: rectangular
• Number of pins: 4
• Temperature range from [°C]: 89
• Temperature range to [°C]: 97
• for OE number: 1669990
• Supplementary Article/Info 2: with seal ring