• Fitting Position: Rear Axle
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Vehicle Identification Number (VIN) to: 31-P-026 435
• Fitting Position: Front Axle
• Material: Plastic
• Colour: black
• Manufacturer: JP-GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Weight [kg]: 0.013
• Outer Diameter [mm]: 19.5
• Width [mm]: 13
• Thread Size: M14 x 1,50
• Manufacturer: 3RG

• Vehicle Identification Number (VIN) to: 31-P-026 435
• new version:
• Length [mm]: 84
• Inner Diameter [mm]: 54
• Outer Diameter [mm]: 75, 67
• Colour: black
• Material: Plastic
• Fitting Position: Front Axle
• Weight [kg]: 0.032
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. GOLF/P

• SVHC: No SVHC present!
• Name: Keermehlss,vedruamort
• Manufacturer: FAG

• Vehicle Identification Number (VIN) to: 31-P-026435
• Fitting Position: Front Axle both sides
• Thread Size: M 14 x 1,5
• Name: Mutter - Rattad PODUSZKI AMORT. VW P. GOLF 2/A80
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) to: 31-P-026 435
• Fitting Position: Front Axle
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Fitting Position: Front Axle
• Inner Diameter [mm]: 19
• Thickness [mm]: 84
• Manufacturer: DELLO AUTOMEGA

• Vehicle Identification Number (VIN) to: 31-P-026 435
• Thickness [mm]: 13
• Outer Diameter [mm]: 19.5
• Internal Thread Size: M14 x 1,5
• Fitting Position: Front Axle
• Weight [kg]: 0.016
• Name: Mutter - Rattad PODUSZKI AMORT. VW P. GOLF 2/A80
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: 31-P-026435
• Material: Thermoplast
• Fitting Position: Front Axle
• Height [mm]: 173
• Manufacturer: MAX

Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. GOLF/P

• Vehicle Identification Number (VIN) from: 31-P-026 436
• Internal Thread Size: M14 x 1,5
• Fitting Position: Front Axle
• Weight [kg]: 0.05
• Manufacturer: FEB
• Additional information: FE14099
• Lisainfo: FE14099

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Mutter - Rattad AMORT. VW P. GOLF III/IV/BORA/CADDY/PASSAT/OCTAVIA

• Required quantity: 2
• Fitting Position: Front Axle
• Inner Diameter [mm]: 18
• Outer Diameter [mm]: 60
• Height [mm]: 86
• Manufacturer: TEDGUM
• Name: TG 00720332

• Vehicle Equipment: for vehicles without leveling control
• Suspension: for vehicles with bad road version
• Material: Rubber
• Fitting Position: Rear Axle
• Inner Diameter 1 [mm]: 48
• Inner Diameter 2 [mm]: 65
• Manufacturer: MAX

Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW T. PASSAT

• Vehicle Identification Number (VIN) to: 31-P-026435
• Fitting Position: Front Axle Left, Front Axle Right
• Height [mm]: 84
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• Bellows Material: Thermoplast
• Height [mm]: 125
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Height [mm]: 155
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Height [mm]: 84
• for OE number: 357412303E
• Manufacturer: SASIC

• Vehicle Identification Number (VIN) to: 31-P-026 435
• Fitting Position: Front Axle
• Material: Thermoplast
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Fitting Position: Rear Axle
• Suspension: for vehicles with bad road version
• Manufacturer: JP-GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Vehicle Identification Number (VIN) to: 31-P-026435
• Fitting Position: Front Axle
• Material: Rubber, Plastic
• Name: PUHVER, VEDRUSTUS
• Manufacturer: MAX

• Vehicle Identification Number (VIN) to: 31-P-026 435
• Thickness [mm]: 84
• Inner Diameter [mm]: 18.5
• Material: Rubber
• Fitting Position: Front Axle
• Weight [kg]: 0.112
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Equipment: for vehicles without leveling control
• Material: PU (Polyurethane)
• Fitting Position: Rear Axle, Front Axle Right, Front Axle Left
• Thickness [mm]: 155
• Name: PUHVER, VEDRUSTUS
• Manufacturer: MAX

• Fitting Position: Rear Axle
• SVHC: No SVHC present!
• Manufacturer: FAG

• Vehicle Identification Number (VIN) to: 31-P-026 435
• Fitting Position: Front Axle
• Lisainfo: Tower rubber stop
• Additional information: Tower rubber stop

• Vehicle Identification Number (VIN) to: 31-P-026 435
• Thickness [mm]: 84
• Inner Diameter [mm]: 18.5
• Material: Rubber
• Fitting Position: Front Axle
• Weight [kg]: 0.112
• Name: PUHVER, VEDRUSTUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: 31-P-026 435
• Fitting Position: Front Axle
• Height [mm]: 84
• Inner Diameter [mm]: 18.5
• Quantity Unit: Piece
• Dust Cover: without dust cover
• replacement in pairs recommended:
• Name: PUHVER, VEDRUSTUS
• Manufacturer: MEY

• Vehicle Identification Number (VIN) to: 31-P-026435
• Fitting Position: Front Axle
• Bellows Material: Thermoplast
• Height [mm]: 215
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Equipment: for vehicles without leveling control
• Suspension: for vehicles with bad road version
• Length [mm]: 180
• Material: Rubber
• Fitting Position: Rear Axle
• Inner Diameter 1 [mm]: 48
• Inner Diameter 2 [mm]: 65
• Weight [kg]: 0.055
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW T. PASSAT

• Fitting Position: Rear Axle
• Height [mm]: 155
• Manufacturer: JP-GROUP
• Lisainfo: Tower rubber stop, rear
• Additional information: Tower rubber stop, rear

• Vehicle Identification Number (VIN) from: 31-P-026 436
• Thickness [mm]: 225
• Material: Thermoplastic polyester elastomer
• Fitting Position: Front Axle
• Weight [kg]: 0.068
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. GOLF/P

• Vehicle Identification Number (VIN) from: 31-P-026 436
• Thickness [mm]: 225
• Material: Thermoplastic polyester elastomer
• Fitting Position: Front Axle
• Weight [kg]: 0.068
• Name: SW 30 60 0038
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Material: PU (Polyurethane)
• Fitting Position: Front Axle
• Weight [kg]: 0.215
• Name: PUHVER, VEDRUSTUS
• Manufacturer: FEB
• Additional information: FE13001
• Lisainfo: FE13001

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Equipment: for vehicles without leveling control
• Thickness [mm]: 155
• Material: PU (Polyurethane)
• Fitting Position: Rear Axle
• Weight [kg]: 0.091
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: 31-P-026 435
• Length [mm]: 172.5
• Material: Thermoplast
• Fitting Position: Front Axle
• Weight [kg]: 0.049
• for OE number: 357 413 175
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 357513425
• Fitting Position: Rear Axle
• Material: Thermoplast
• Weight [g]: 92
• Name: IM 35007
• Manufacturer: ORIGINAL IMPERIUM

• for OE number: 6U6412303
• Fitting Position: Front Axle
• Weight [g]: 60
• Name: IM 32285
• Manufacturer: ORIGINAL IMPERIUM

• Vehicle Identification Number (VIN) from: 31-P-026 435
• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 83
• Manufacturer: LEMFORDER

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front
• Length [mm]: 210
• Weight [kg]: 0.08
• Material: Rubber
• Weight [g]: 80
• Inner Diameter 1 [mm]: 18
• Inner Diameter 2 [mm]: 71
• Manufacturer: METALCAUCHO

• Spanner Size: 18
• Fitting Position: Front Axle
• Thread Size: M12 x 1,5
• Weight [kg]: 0.095
• Name: KRUVIKOMPLEKT,VEDRUAMORT-RATTALAAGRIKORPUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Thickness [mm]: 155
• Required quantity: 2
• Weight [kg]: 0.263
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) from: 31-P-026 436
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer! Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. GOLF/PASSAT/VENTO

• Suspension: for vehicles without bad road version
• Fitting Position: Front Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MAX

• Vehicle Identification Number (VIN) to: P-026435
• Spring Type: for vehicles without air suspension
• Suspension: for vehicles without bad road version
• Fitting Position: Front Axle
• Overall Height [mm]: 170
• Manufacturer: JAPKO

• Vehicle Identification Number (VIN) to: 31-P-026 435
• Fitting Position: Front Axle
• Height [mm]: 84
• Inner Diameter [mm]: 18.5
• Quantity Unit: Set
• Dust Cover: with dust cover
• replacement in pairs recommended:
• Name: PUHVER, VEDRUSTUS
• Manufacturer: MEY

• Construction Year to: 07.1991
• Fitting Position: Front Axle
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Rear Axle
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Front Axle
• Component Number: ugu
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Rear Axle
• Name: CFD PK4760
• Manufacturer: DACO

• Name: Shock absorber protection kit left+right
• Quality class: Q

Lisainfo: "Tootja: POLCAR
SEAT CORDOBA (6K2)
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Suspension: for vehicles without bad road version
• Manufacturer: JP GROUP

• Vehicle Identification Number (VIN) to: 31-P-026 435
• Fitting Position: Front Axle
• Weight [kg]: 0.288
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with protective cap/bellow
• Quantity per axle: 1
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) to: P-026435
• Spring Type: for vehicles without air suspension
• Suspension: for vehicles without bad road version
• Fitting Position: Front Axle
• Overall Height [mm]: 170
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: JPA

• Construction Year to: 07.1991
• Fitting Position: Rear Axle
• for OE number: 60507899
• Manufacturer: KAMOKA

• Vehicle Identification Number (VIN) to: P-026435
• Spring Type: for vehicles without air suspension
• Suspension: for vehicles without bad road version
• Fitting Position: Front Axle
• Overall Height [mm]: 170
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: KYB
• Lisainfo: 915401 KYB
• Additional information: 915401 KYB

Technical Information: Please refer to the technical drawing in "Documents"

• Name: Shock absorber protection kit left+right
• Quality class: Q

Lisainfo: "Tootja: POLCAR
AUDI 50 (86)
(kvaliteediklass: Q)"

• Installatsiooni pool: Tagasild
• Kõrgus (mm): 90
• Lisainfo: Dust Cover Kit, shock absorber
• Additional information: Dust Cover Kit, shock absorber

• Construction Year from: 01.1992
• Vehicle Identification Number (VIN) from: P-026436
• Spring Type: for vehicles without air suspension
• Suspension: for vehicles without bad road version
• Fitting Position: Front Axle
• Overall Height [mm]: 210
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: JPA

• Construction Year from: 01.1992
• Vehicle Identification Number (VIN) from: P-026436
• Spring Type: for vehicles without air suspension
• Suspension: for vehicles without bad road version
• Fitting Position: Front Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: KYB
• Additional information: KYB910088
• Lisainfo: KYB910088

• Fitting Position: Front Axle, Front Axle both sides
• Suspension: for vehicles without bad road version
• Name: Shock absorber protection kit left+right
• Quality class: PJ

Lisainfo: "Tootja: SRL
SEAT/VW
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
SEAT/VW
(kvaliteediklass: PJ)"

• Suspension: for vehicles without bad road version
• Fitting Position: Rear Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MAX

• Suspension: for vehicles without bad road version
• Quantity Unit: Set
• Fitting Position: Rear Axle
• Weight [kg]: 0.254
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Name: Shock absorber protection kit left+right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI/VW
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Manufacturer: DENCKERMANN AMORTYZATORY

• Name: Shock absorber protection kit left+right
• Quality class: Q

Lisainfo: "Tootja: POLCAR
SEAT TOLEDO I (1L)
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Weight [kg]: 0.3
• Warranty: 5 years warranty
• Packaging length [cm]: 22
• Packaging width [cm]: 11
• Packaging height [cm]: 18
• Manufacturer: MONROE

• Material: PU (Polyurethane)
• Fitting Position: Rear Axle
• Weight [kg]: 0.154
• Name: PUHVER, VEDRUSTUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, Rear Axle both sides
• Suspension: for vehicles without bad road version
• Name: Shock absorber protection kit left+right
• Quality class: PJ

Lisainfo: "Tootja: SRL
VOLKS./SKODA/SEAT
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
VOLKS./SKODA/SEAT
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle
• Suspension: for vehicles without bad road version
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Material: PU (Polyurethane)
• Fitting Position: Front Axle
• Weight [kg]: 0.215
• Name: SW 30 56 0011
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Suspension: for vehicles without bad road version
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• for OE number: 191412303A
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: AUT

• Vehicle Identification Number (VIN) from: 3A-R-000 001
• Suspension: for vehicles without bad road version
• Fitting Position: Rear Axle
• Quantity Unit: Set
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Weight [kg]: 0.3
• Warranty: 5 years warranty
• Packaging length [cm]: 22
• Packaging width [cm]: 11
• Packaging height [cm]: 18
• Manufacturer: MONROE

• Suspension: for vehicles without bad road version
• Fitting Position: Rear Axle
• Quantity Unit: Set
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MEY

• for OE number: 6U0513423
• Fitting Position: Rear Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: AUT

• Fitting Position: Front Axle
• for OE number: 357412303F
• Name: SE D5-221
• Manufacturer: AUTOFREN SEINSA

• Fitting Position: Front Axle
• Name: SE D5-153
• Manufacturer: AUTOFREN SEINSA

• Fitting Position: Rear Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: BIL
• Quality class: Q

Suspension: for vehicles with standard suspension, for vehicles without bad road version Additional information: "Tootja: BILSTEIN
SEAT/ VW
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
SEAT/ VW
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: BIL
• Quality class: Q

Suspension: for vehicles with standard suspension, for vehicles without bad road version Lisainfo: "Tootja: BILSTEIN
SEAT/ VW
(kvaliteediklass: Q)" Additional information: "Tootja: BILSTEIN
SEAT/ VW
(kvaliteediklass: Q)"