• Lülituspunkt alates [bar]: 0,15
• Lülituspunkt kuni [bar]: 0,35
• Värvimarkeering: sinine
• Ühenduste arv: 1
• Väliskeere [mm]: M10x1
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Catalytic Converter Type: for vehicles with catalytic converter
• Pistikkontaktide arv: 2
• Värv: sinine
• Manufacturer: JP GROUP A/S
• Lisainfo: Temperature sensor for cooling system, 2 pins
• Additional information: Temperature sensor for cooling system, 2 pins

• Pistikkontaktide arv: 2
• Korpusevärv: must
• Pistikukatte kuju: nurgeline
• Manufacturer: JP GROUP A/S
• Lisainfo: Temperature sensor for cooling system, 2 pins
• Additional information: Temperature sensor for cooling system, 2 pins

• Pistikkontaktide arv: 7
• Mähised-Süütesüsteem: Transistorsüüde(TZ)
• Lisainfo: Switch unit for TCI
• Additional information: Switch unit for TCI

• Construction Year from: 08.1988
• Construction Year to: 07.1990
• Transmission Type: Automatic Transmission
• Oxygen Sensor: Regulating Probe
• Exhaust System: for pre-catalytic converter
• OE-numbri jaoks: 030906265
• Kvaliteet: OE
• Tootja piirang: DENSO
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 986
• Pistikkontaktide arv: 3
• Kaal (g): 113
• Lambda andur: soojendatud, Sõrmesensor, Bistabiilne andur
• Brutokaal [g]: 143
• Manufacturer: DENSO

Additional information: "Tootja: DENSO
POLO (86C, 80), 10.8
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
POLO (86C, 80), 10.8
(kvaliteediklass: Q)"

• Keermemõõt: M10
• Värvimarkeering: pruun
• Pistikkontaktide arv: 1
• Võtmekaugus: 24
• Piirangutega toode/piirangu info: koos tihendiga
• OE-numbri jaoks: 056919081C
• Manufacturer: DELLO AUTOMEGA

• Vehicle Identification Number (VIN) from: 31-J-000 001
• Keermemõõt: M10x1
• Värv: hall
• Pistikkontaktide arv: 1
• Võtmekaugus: 24
• Manufacturer: DELLO AUTOMEGA

• Vehicle Identification Number (VIN) from: 31-J-000 001
• Keermemõõt: M10x1
• Pikkus (mm): 46
• Võtmekaugus: 24
• Pistikkontaktide arv: 1
• Värv: must
• Manufacturer: DELLO AUTOMEGA

• Keermemõõt: M10x1
• Pikkus (mm): 46
• Võtmekaugus: 24
• Värvimarkeering: valge
• Pistikkontaktide arv: 1
• Manufacturer: DELLO AUTOMEGA

• Keermemõõt: M10x1
• Värv: must
• Pistikkontaktide arv: 1
• Võtmekaugus: 14
• Pikkus (mm): 25
• Manufacturer: DELLO AUTOMEGA

• Keermemõõt: M10x1
• Pikkus (mm): 46
• Võtmekaugus: 24
• Värv: sinine
• Pistikkontaktide arv: 1
• Manufacturer: DELLO AUTOMEGA

• Pistikute teostus: Lamepistik
• Rakendustüüp: hüdrauliline
• Värvimarkeering: pruun
• Keermemõõt: M 10
• Keerme samm (mm): 1
• Pistikkontaktide arv: 1
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Lülituspunktid [bar]: 0,3
• Manufacturer: TOPRAN HANS PRIES

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Pistikute teostus: Lamepistik
• Rakendustüüp: hüdrauliline
• Värvimarkeering: valge
• Keermemõõt: M 10
• Keerme samm (mm): 1
• Pistikkontaktide arv: 1
• Lülitusulatus (bar): 1,6 - 2,0
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Pistikute teostus: Lamepistik
• Rakendustüüp: hüdrauliline
• Värvimarkeering: sinine
• Keermemõõt: M 10
• Keerme samm (mm): 1
• Pistikkontaktide arv: 1
• Lülitusulatus (bar): 0,15 - 0,35
• Manufacturer: TOPRAN
• Lisainfo: 100 345 HP
• Additional information: 100 345 HP

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Pistikute teostus: Lamepistik
• Rakendustüüp: hüdrauliline
• Värvimarkeering: hall
• Keermemõõt: M 10
• Keerme samm (mm): 1
• Pistikkontaktide arv: 1
• Lülitusulatus (bar): 0,75 - 1,05
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Pistikute teostus: Lamepistik
• Rakendustüüp: hüdrauliline
• Värvimarkeering: must
• Keermemõõt: M 10
• Keerme samm (mm): 1
• Pistikkontaktide arv: 1
• Lülitusulatus (bar): 1,2 - 1,6
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: PF
• Colour: blue
• Surve (bar): 0,3
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Name: EP 1.800.108
• Manufacturer: EPS
• Additional information: 1-800-108
• Lisainfo: 1-800-108

• Engine Code: PF
• Colour: blue
• Surve (bar): 0,3
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Manufacturer: FACET

• Lülituspunkt alates [bar]: 1,6
• Lülituspunkt kuni [bar]: 2
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Catalytic Converter Type: for vehicles with catalytic converter
• Pistikukatte kuju: ristkülik
• Anduritüüp: NTC-andur
• Pistikkontaktide arv: 2
• Värvimarkeering: sinine
• Manufacturer: TOPRAN HANS PRIES
• Lisainfo: 100 191 HP
• Additional information: 100 191 HP

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Pikkus (mm): 46
• Lülituspunkt alates [bar]: 0,15
• Lülituspunkt kuni [bar]: 0,35
• Siseläbimõõt [mm]: 2,54
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 13
• Võtmekaugus: 24
• Ühenduste arv: 1
• Värvimarkeering: sinine
• Pealispind: tsingitud
• Kaal (kg): 0,031
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pistikukatte kuju: ristkülik
• Anduritüüp: NTC-andur
• Pistikkontaktide arv: 2
• Värvimarkeering: must/roheline
• Manufacturer: TOPRAN
• Lisainfo: 103 327 HP
• Additional information: 103 327 HP

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Equipment: for vehicles with air conditioning
• Pistikkontaktide arv: 2
• Lülituspunkt [°C]: 119
• Lisainfo: Thermo switch for air condition 119 C
• Additional information: Thermo switch for air condition 119 C

• Lülituspunkt alates [bar]: 0,15
• Pikkus (mm): 46
• Lülituspunkt kuni [bar]: 0,35
• Siseläbimõõt [mm]: 2,54
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 13
• Võtmekaugus: 24
• Ühenduste arv: 1
• Värvimarkeering: sinine
• Pealispind: tsingitud
• Kaal (kg): 0,031
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Name: SW 30 23 0002
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Korpusevärv: sinine
• OE-numbri jaoks: 025906041A
• Manufacturer: KAMOKA

• Keermemõõt: M10x1,0
• Värv: must
• Ühenduste arv: 1
• Kaal (kg): 0,019
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• OE-numbri jaoks: 251919501A
• Manufacturer: KAMOKA

• Lülituspunkt alates [bar]: 0,75
• Lülituspunkt kuni [bar]: 1,05
• Väliskeere [mm]: M10x1
• Ühenduste arv: 1
• Värvimarkeering: hall
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Pikkus (mm): 46
• Lülituspunkt alates [bar]: 1,6
• Lülituspunkt kuni [bar]: 2
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 13
• Võtmekaugus: 24
• Ühenduste arv: 1
• Värvimarkeering: valge
• Pealispind: tsingitud
• Kaal (kg): 0,03
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Värvimarkeering: must/roheline
• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 2
• Välisläbimõõt [mm]: 20
• OE-numbri jaoks: 1669949
• Manufacturer: DELLO AUTOMEGA

• Korpusevärv: punane
• Manufacturer: KAMOKA

• Surve (bar): 3,5
• Korpusevärv: sinine
• Keermemõõt: M10×1-6g
• Läbimõõt [mm]: 24
• Võtmekaugus: 24
• Pistikkontaktide arv: 1
• Name: DE SW90009
• Manufacturer: DELPHI
• Lisainfo: SW90009
• Additional information: SW90009

• Construction Year to: 07.1990
• Pressure from [bar]: 0.15
• Pressure to [bar]: 0.45
• Colour: blue
• Surve (bar): 0,3
• Keermemõõt: M10 x 1
• Kaal (kg): 0,036
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Korpusevärv: valge
• OE-numbri jaoks: 191 919 369 A S1
• Manufacturer: KAMOKA

• Construction Year to: 06.1993
• Lülitusrõhk [bar]: 0,3
• Keermemõõt: M10x1.0
• Anduritüüp: kinnine anduri ehitusviis
• Manufacturer: VERNET

• Lülitusrõhk [bar]: 1,8
• Keermemõõt: M10x1.0
• Anduritüüp: lahtine anduri ehitusviis
• Manufacturer: VERNET

• Number of pins: 1
• Switch pressure from [bar]: 0.15
• Switch pressure to [bar]: 0.43
• Thread Size: M 10x1
• Colour: black, brown
• Supplementary Article/Supplementary Info: with gasket/seal
• Spanner Size: 24
• Version: Neue Version
• Manufacturer: METZGER

• Colour: grey
• Pressure [bar]: 0.9
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Pikkus (mm): 46
• Lülituspunkt alates [bar]: 1,6
• Lülituspunkt kuni [bar]: 2
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 13
• Võtmekaugus: 24
• Ühenduste arv: 1
• Värvimarkeering: valge
• Pealispind: tsingitud
• Kaal (kg): 0,03
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Name: SW 30 23 0001
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M 10x1
• Colour: brown
• Spanner Size: 24
• Number of pins: 1
• Supplementary Article/Info 2: with seal ring
• Pressure [bar]: 0.25
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Temperatuurivahemik kuni [°C]: 125
• Pikkus (mm): 25
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 10,9
• Võtmekaugus: 14
• Ühenduste arv: 1
• Värvimarkeering: must
• Kaal (kg): 0,012
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Colour: blue
• Shifting Points [bar]: 0.25
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Colour: white
• Pressure [bar]: 1.8
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year from: 05.1988
• Lülitusrõhk [bar]: 1,4
• Keermemõõt: M10x1.0
• Anduritüüp: lahtine anduri ehitusviis
• Manufacturer: VERNET

• Catalytic Converter Type: for vehicles with catalytic converter
• Vehicle Identification Number (VIN) from: 31-J-000 001
• Keermemõõt: M10x1
• Värv: valge
• Pistikkontaktide arv: 2
• Manufacturer: DELLO AUTOMEGA

• Construction Year from: 06.1988
• Lülitusrõhk [bar]: 0,9
• Keermemõõt: M10x1.0
• Anduritüüp: lahtine anduri ehitusviis
• Manufacturer: VERNET

• Engine Code: PF
• Colour: white
• Surve (bar): 1,8
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Name: EP 1.800.045
• Manufacturer: EPS

• Pressure [bar]: 0.3
• Thread Size: M10 x 1
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Engine Code: PF
• Colour: white
• Surve (bar): 1,8
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Manufacturer: FACET

• Pressure [bar]: 1.4
• Thread Size: M10 x 1
• Technical Information Number: circuit N.O.
• Manufacturer: ERA

• Piirangutega toode/piirangu info: koos tihendiga
• Keermemõõt: M10x1,0
• Lülitusulatus (bar): 0,15 - 0,35
• Värv: sinine
• Kaal (kg): 0,038
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pressure [bar]: 0.9
• Thread Size: M10 x 1
• Technical Information Number: circuit N.O.
• Manufacturer: ERA

• Alternatively:
• Surve (bar): 10,5
• Korpusevärv: hall
• Keermemõõt: M10×1-6g
• Läbimõõt [mm]: 24
• Võtmekaugus: 24
• Pistikkontaktide arv: 1
• Manufacturer: DELPHI
• Lisainfo: SW90007
• Additional information: SW90007

• Pikkus (mm): 25
• Temperatuurivahemik kuni [°C]: 125
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 10,9
• Võtmekaugus: 14
• Ühenduste arv: 1
• Värvimarkeering: must
• Kaal (kg): 0,012
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Name: SW 99 90 1939
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Keermemõõt: M 10x1
• Korpusevärv: valge
• Surve (bar): 0,9
• Manufacturer: FAE

• Engine Code: PF
• Colour: grey
• Surve (bar): 0,9
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Vastab originaalosa värvile: pruun
• Name: EP 1.800.095
• Manufacturer: EPS

• Surve (bar): 16
• Korpusevärv: must
• Keermemõõt: M10×1-6g
• Läbimõõt [mm]: 24
• Võtmekaugus: 24
• Pistikkontaktide arv: 1
• Manufacturer: DELPHI
• Name: DE SW90005
• Lisainfo: SW90005
• Additional information: SW90005

• Engine Code: PF
• Colour: grey
• Surve (bar): 0,9
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Vastab originaalosa värvile: pruun
• Manufacturer: FACET

• Lülituspunkt alates [bar]: 0,75
• Pikkus (mm): 46
• Lülituspunkt kuni [bar]: 1,05
• Siseläbimõõt [mm]: 2,48
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 13
• Võtmekaugus: 24
• Ühenduste arv: 1
• Värvimarkeering: hall
• Lülituspunktid [bar]: 0,7
• Pealispind: tsingitud
• Kaal (kg): 0,031
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 07.1990
• Number of pins: 1
• Pressure [bar]: 0.3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Keermemõõt: M 10x1
• Korpusevärv: must
• Surve (bar): 1,4
• Manufacturer: FAE

• Keermemõõt: M10x1,0
• Värv: valge
• Kaal (kg): 0,033
• Surve alates (bar): 1,6
• Surve (bar) kuni: 2
• Manufacturer: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pistikkontaktide arv: 2
• Lülituspunkt [°C]: 55, 65
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Korpusevärv: pruun
• Lülitamispunkt alates [°C]: 65
• Lülituspunkt kuni [°C]: 55
• Kaal (kg): 0,027
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: PF
• Colour: black
• Surve (bar): 1,4
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Name: EP 1.800.046
• Manufacturer: EPS

• Engine Code: PF
• Colour: black
• Surve (bar): 1,4
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Manufacturer: FACET

• Ühenduste arv: 2
• Värvimarkeering: roheline
• Kaal (kg): 0,02
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pikkus (mm): 46
• Lülituspunkt alates [bar]: 0,75
• Lülituspunkt kuni [bar]: 1,05
• Siseläbimõõt [mm]: 2,48
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 13
• Võtmekaugus: 24
• Ühenduste arv: 1
• Värvimarkeering: hall
• Lülituspunktid [bar]: 0,7
• Pealispind: tsingitud
• Kaal (kg): 0,031
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Name: SW 30 23 0004
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pistikukatte kuju: ümar
• Materjal: Messing
• Pistikkontaktide arv: 1
• Pistikute teostus: Male
• Anduritüüp: NTC-andur
• Võtmekaugus: 14 mm
• Keermemõõt: M10x1,0
• Name: NI 207044
• Manufacturer: NISSENS

Tehniline informatsioon: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Anduritüüp: NTC-andur
• Montaaživiis: klemmitud
• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 2
• OE-numbri jaoks: 025906041A
• Piirangutega toode/piirangu info 2: koos osadega
• Manufacturer: NRF

• Ühenduste arv: 2
• Värvimarkeering: roheline
• Kaal (kg): 0,02
• Name: SW 30 91 8666
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Manufacturer: FAE

• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Pinge [V]: 12
• Lüliti funktsioon: avaja
• Voolutugevus (A): 0,25
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Surve alates (bar): 0,15
• Surve (bar) kuni: 0,35
• Pistikkontaktide arv: 1
• Pistikute teostus: Lamepistik
• Vastab originaalosa värvile: sinine
• Monteerimist/demonteerimist peab tegema spetsialist!:
• SVHC: 7439-92-1; plii
• Manufacturer: HELLA
• Name: HE 6ZL003259641

• Number of pins: 2
• Colour: black
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Anduritüüp: NTC-andur
• Montaaživiis: klemmitud
• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 2
• Pistiku värv: must
• OE-numbri jaoks: 251919501A
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: NRF

• Väändejõud alates [Nm]: 20
• Pinge [V]: 12
• Lüliti funktsioon: Lukustaja
• Voolutugevus (A): 0,25
• Tolerants (%): 15
• Keermemõõt: M10x1
• Võtmekaugus: 24
• Surve alates (bar): 1,6
• Surve (bar) kuni: 2
• Pistikkontaktide arv: 1
• Vastab originaalosa värvile: piimvalge
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: HELLA
• Name: HE 6ZL003259441

• Required quantity: 1
• Special Purpose Vehicle: for rental vehicles, for taxis
• only in connection with: Zusatzwasserpumpe
• Number of pins: 2
• Switch Point [°C]: 55, 65
• Colour: red
• Supplementary Article/Info 2: with seal ring
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Anduritüüp: NTC-andur
• Montaaživiis: klemmitud
• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 4
• Pistiku värv: must
• OE-numbri jaoks: 357919501A
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: NRF