Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Vehicle Identification Number (VIN) from: 1H-
SB019 476, 1H- SW062 539 - Fitting Position: Front Axle
- Height [mm]: 83
- Lisainfo: Tower rubber stop
- Additional information: Tower rubber stop
- Fitting Position: Front Axle
- Material: Plastic
- Colour: black
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- new version:
- Length [mm]: 84
- Inner Diameter [mm]: 54
-
Outer Diameter [mm]: 75,
67 - Colour: black
- Material: Plastic
- Fitting Position: Front Axle
- Weight [kg]: 0.032
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Height [mm]: 86
- Weight [kg]: 0.11
- Fitting Position: Front Axle
- Required quantity: 2
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 60
- Name: TG 00720332
- Manufacturer: TEDGUM
-
Vehicle Identification Number (VIN) from: ******1H*SB019476,
******1H*SW062539 -
Internal Thread Size: M14 x 1,
5 - Fitting Position: Front Axle
- Weight [kg]: 0.05
- Manufacturer: FEBI BILSTEIN
- Additional information: FE14099
- Lisainfo: FE14099
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) from: 1H-
SB019 476, 1H- SW062 539 - Installatsiooni pool: Esisild
- Jämedus/Tugevus (mm): 83
- Manufacturer: OYODO
-
Vehicle Identification Number (VIN) to: 1H-
SB019 475, 1H- SW062 538 - Fitting Position: Front Axle
- Material: Thermoplast
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Vehicle Identification Number (VIN) to: ******1H*SB019475,
******1H*SW062538 - Thickness [mm]: 84
- Inner Diameter [mm]: 18.5
- Material: Rubber
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.112
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) from: 1H-
SB019 476, 1H- SW062 539 - Thickness [mm]: 63
-
Material: PU
(Polyurethane) - Fitting Position: Front Axle
- Weight [kg]: 0.09
- Name: SW 30 91 8365
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) from: ******1H*SB019476,
******1H*SW062539 - Thickness [mm]: 63
-
Material: PU
(Polyurethane) - Fitting Position: Front Axle
- Weight [kg]: 0.09
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) from: 1H-
SB019 476, 1H- SW062 539 - Thickness [mm]: 225
- Material: Thermoplastic polyester elastomer
- Fitting Position: Front Axle
- Weight [kg]: 0.068
- Name: SW 30 60 0038
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) from: ******1H*SB019476,
******1H*SW062539 - Thickness [mm]: 83
-
Material: PU
(Polyurethane) - Fitting Position: Front Axle
- Weight [kg]: 0.1
- for OE number: 357 412 303 F
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) from: ******1H*SB019476,
******1H*SW062539 - Thickness [mm]: 225
- Material: Thermoplastic polyester elastomer
- Fitting Position: Front Axle
- Weight [kg]: 0.068
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front
- General Information: front strut bump stop
- Manufacturer: BORSEHUNG
-
Vehicle Identification Number (VIN) from: 1H-
SB019 476, 1H- SW062 539 - Quantity per packing unit: 2
- Fitting Position: Front Axle
- Weight [kg]: 0.069
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle both sides
- General Information: dust boot
- Manufacturer: BORSEHUNG
- Fitting Position: Front
- General Information: front strut bump stop
- Manufacturer: BORSEHUNG
- Quantity per packing unit: 2
- Fitting Position: Rear Axle
- Thickness [mm]: 155
- Required quantity: 2
- Weight [kg]: 0.263
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear
- General Information: rear strut bump stop
- Manufacturer: BORSEHUNG
- Fitting Position: Front Axle
- Manufacturer: KAMOKA
- Fitting Position: Rear Axle
- Manufacturer: KAMOKA
-
Material: PU
(Polyurethane) - Fitting Position: Front Axle
- Weight [kg]: 0.215
- Name: SW 30 56 0011
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Material: PU
(Polyurethane) - Fitting Position: Rear Axle
- Weight [kg]: 0.154
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity: 2
- Fitting Position: Front Axle
- Quantity Unit: Kit
- General Information: repair kit for shock absorber; front
- Manufacturer: BORSEHUNG
- Fitting Position: Front Axle
- Manufacturer: BILSTEIN
-
Name: BI 11-
101291 - Quality class: Q
Suspension: for vehicles with standard suspension, for vehicles with sports suspension
Additional information: "Tootja: BILSTEIN
SEAT/ VW
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
SEAT/ VW
(kvaliteediklass: Q)"
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks