Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Sensor Type: NTC Sensor
- Colour Coding: black
- Name: MM SPA105
- Manufacturer: MAGNETI MARELLI
- Üldine informatsioon: temperature sensor
- Manufacturer: VIKA
-
Thread Size: M10x1,
0 - Colour: black
- Number of connectors: 1
- Weight [kg]: 0.019
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Manufacturer: MAGNETI MARELLI
- Engine Code: PL
- Diameter [mm]: 26
- Length [mm]: 35
- Weight [kg]: 0.02
- Supplementary Article/Info 2: with seal ring
- for OE number: 251 919 501 D
- Housing Colour: black
- Supplementary Article/Supplementary Info: with seal
- Number of pins: 2
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Pistikkontaktide arv: 3
- Pistiku värv: sinine
-
Seerianumber: ESS-
AU- 001 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Pistikkontaktide arv: 3
- Pistiku värv: roheline
-
Seerianumber: ESS-
AU- 000 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: PL
- Number of pins: 2
- Colour: blue
- Manufacturer: FACET
- Engine Code: PL
- Number of pins: 2
- Colour: blue
- Name: EP 1.830.101
- Manufacturer: EPS
- Catalytic Converter Type: for vehicles with catalytic converter
- Length [mm]: 37
- Weight [kg]: 0.02
- Supplementary Article/Info 2: with seal ring
- for OE number: 025 906 041 A
- Supplementary Article/Supplementary Info: with seal
- Colour Coding: blue
- Number of pins: 2
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: PL
- Number of pins: 2
- Colour: black
- Manufacturer: FACET
- Sensor Type: NTC Sensor
- Voltage [V]: 12
- Colour Coding: blue
- Manufacturer: MAGNETI MARELLI
- Name: MM SPA106
- Engine Code: PL
- Number of pins: 2
- Colour: black
- Name: EP 1.830.086
- Manufacturer: EPS
- Cable Length [mm]: 730
- Manufacturer: KAMOKA
-
Thread Size: M10x1,
0 - Colour: white
- Spanner Size: 19
- Supplementary Article/Supplementary Info: with seal
- Number of pins: 2
- Weight [kg]: 0.029
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: PL
- Number of pins: 2
- Colour: white
- External Thread [mm]: M10x1
- Thread Size: M10x1
- Spanner Size: 19
- Manufacturer: FACET
- Engine Code: PL
- Number of pins: 2
- Colour: white
- External Thread [mm]: M10x1
- Thread Size: M10x1
- Spanner Size: 19
- Name: EP 1.830.171
- Manufacturer: EPS
-
Thread Size: M14x1,
5 - Colour: white
- Spanner Size: 19
- Supplementary Article/Supplementary Info: with seal
- Number of pins: 2
- Weight [kg]: 0.034
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Thread Size: M14x1,
5 - Number of pins: 2
- Housing Colour: white
- Manufacturer: FAE
- Number of pins: 3
- Supplementary Article/Info 2: with cable
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
-
Colour: green,
black - Manufacturer: DELLO AUTOMEGA
- Construction Year from: 01.1989
- Mounting Type: Plugged
- Voltage [V]: 12
-
Resistor [Ohm]: 2,
080, 322 - Supplementary Article/Supplementary Info: with seal
- Temperature range from [°C]: 25
- Temperature range to [°C]: 80
- Colour: blue
- Sensor Type: NTC Sensor
- Number of pins: 2
- Supplementary Article/Info 2: with retaining ring
- Corresponds to the original part in colour: blue
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PT009107551
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Korpusevärv: valge
-
Keermemõõt: M10 x 1,
0 - Pistikkontaktide arv: 2
- Piirangutega toode/piirangu info: koos tihendiga
-
Temperatuurivahemik [°C]: 25,
80 -
Võimsus [W]: 0,
06 - Manufacturer: METZGER
Manufacturer: MAGNETI MARELLI
Manufacturer: MAGNETI MARELLI
- Engine Code: PL
- Number of pins: 2
- Colour: white
-
External Thread [mm]: M14x1,
5 -
Thread Size: M14x1,
5 - Spanner Size: 19
- Corresponds to the original part in colour: black
- Name: EP 1.830.126
- Manufacturer: EPS
- Cable Length [mm]: 535
- Number of pins: 3
- Housing Colour: blue
- Lisainfo: Knock sensor
- Additional information: Knock sensor
- Pistikkontaktide arv: 3
- Värv: must
- Manufacturer: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- for OE number: 035906265B
- Alternatively:
- Lambda Sensor: Planar probe
- Manufacturer: DELLO AUTOMEGA
- Lambda Sensor: Regulating Probe
- Number of circuits: 1
- Manufacturer: KAMOKA
- Lambda andur: Bistabiilne andur
- Pinge [V]: 12
- Ülekandeliinide arv: 3
-
Kaal (kg): 0,
08 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: ENERGY
- Number of circuits: 3
- Lambda Sensor: Regulating Probe
- Manufacturer: KAMOKA
-
Lambda Sensor: Regulating Probe,
Finger probe, Unheated - Cable Length [mm]: 570
-
Name: DE ES10671-
12B1 - Manufacturer: DELPHI
- Number of circuits: 3
- Overall Length [mm]: 989
- Lambda Sensor: Heated
- Manufacturer: JP GROUP
- Lisainfo: Lambda sensor
- Additional information: Lambda sensor
- Colour: green
- Manufacturer: BOSCH
- for OE number: 034906265F
- Lambda Sensor: Planar probe
- Manufacturer: DELLO AUTOMEGA
- tehnilise informatsiooni number: Universal
- pikkus üle kõige (mm): 315
- Pistikkontaktide arv: 3
- Lambda andur: Sond
- Manufacturer: JAPKO
- Construction Year from: 08.1989
- Colour: blue
- Manufacturer: BOSCH
- Name: BS 0261231036
- tootekoodile: 054 905 377 G
- Laius 1 (mm): 91
- Kõrgus 1 (mm): 37
- Pikkus 1 [mm]: 834
- Kaal (g): 75
- Garantii: 3 aastat garantii
- Manufacturer: AT AUTOTEILE GERMANY
Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
- Cable Length [mm]: 550
- Number of pins: 3
- Housing Colour: blue
- Manufacturer: FAE
- Lambda andur: Bistabiilne andur
- Pinge [V]: 12
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 3
-
Kaal (kg): 0,
08 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Name: CE 09SKV903
- Manufacturer: ESEN SKV
- Diameter [mm]: 90
- Length [mm]: 570
- Height [mm]: 37
- Cable Length [mm]: 535
- Weight [kg]: 0.07
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of pins: 2
- Lambda Sensor: Heated
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Alternatively:
- Number of circuits: 1
-
Recommended change interval [km]: 80,
000 - Connector/Clamp: Connector may need adjustment
- Manufacturer: BOSCH
- Name: BS 0258986501
- Cable Length [mm]: 800
- Number of pins: 3
- Housing Colour: green
- Manufacturer: FAE
-
Lambda Sensor: Regulating Probe,
Finger probe, Heated -
Cable Length [mm]: 1,
215 - Manufacturer: DELPHI
-
Name: DE ES10242-
12B1
- Transmission Type: Manual Transmission
-
Exhaust System: for pre-
catalytic converter - Quality: OE
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 3
- Weight [g]: 95
- Gross Weight [g]: 144
- Manufacturer: DENSO
- Name: Lambda sensor
- Quality class: Q
Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor
Additional information: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)"
- Conductor Number: 3
-
Length [mm]: 1,
215 - Number of circuits: 3
- Resistor [Ohm]: 4.5
-
Cable Length [mm]: 1,
215 - Lambda Sensor: Heated
- Manufacturer: MAGNETI MARELLI
- Name: MM OSM078
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Alternatively:
- Number of circuits: 1
- Overall Length [mm]: 500
- Available as universal article as well, see article no.: 0258986501
-
Recommended change interval [km]: 50,
000 - Manufacturer: BOSCH
- Name: BS 0258001051
- Lambda Sensor: Regulating Probe
- Pinge [V]: 12
- Pikkus (mm): 1 215
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 3
-
Kaal (kg): 0,
13 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Name: CE 09SKV066
- Manufacturer: ESEN SKV
- Lambda andur: Sond
- Pinge [V]: 12
- Pikkus (mm): 1 670
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 3
-
Kaal (kg): 0,
23 -
Takistus [oom]: 4,
5 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV546
- Number of circuits: 3
-
Overall Length [mm]: 1,
236 - Lambda Sensor: Heated
- Lisainfo: Lambda sensor
- Additional information: Lambda sensor
- Lambda andur: Sond
- Pinge [V]: 12
- Pikkus (mm): 985
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 3
-
Kaal (kg): 0,
18 -
Takistus [oom]: 4,
5 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: ESEN SKV
-
Lambda Sensor: Regulating Probe,
Finger probe, Heated - Engine Code: PL
- Cable Length [mm]: 985
- Manufacturer: DELPHI
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 3
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Manufacturer: BOSCH
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 3
-
Overall Length [mm]: 1,
236 - Available as universal article as well, see article no.: 0258986502
-
Recommended change interval [km]: 100,
000 - Manufacturer: BOSCH
- Name: BS 0258003957