Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Vehicle Identification Number (VIN) to: 16-
D- 270 000 - not for country specific design: Sweden
- Fitting Position: Front
- Pump Type: Mono Pump
- Operating Mode: Electric
- Number of pins: 2
- Manufacturer: JP GROUP
-
Lisainfo: Washer pump for windshield washer,
single outlet -
Additional information: Washer pump for windshield washer,
single outlet
- Vehicle Equipment: for vehicles with rear window cleaning
- Fitting Position: Front and Rear
- Pump Type: Dual Pump
- Lisainfo: Washer pump
- Additional information: Washer pump
-
Engine Code: PB,
EV - Supplementary Article/Info 2: for windscreen cleaning
- Pump Type: Mono Pump
- Plug Type: Blade Terminal
- Operating Mode: Electric
- Number of pins: 2
- Rated Voltage [V]: 12
- for OE number: 431 955 651
- Consult accessories list for recommended additional repairs:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Pump Type: Mono Pump
- Voltage [V]: 12
- Number of pins: 2
- Fitting Position: Front
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
-
Engine Code: EV,
PB, GZ -
Vehicle Identification Number (VIN) to: 16-
D- 270 000 - not for country specific design: Sweden
- Block Separation:
- Pump Type: Mono Pump
- Voltage [V]: 12
- Number of connectors: 2
- Weight [kg]: 0.105
- Manufacturer: ENERGY
-
Fitting Position: Rear,
Front - Pump Type: Dual Pump
- Manufacturer: DELLO AUTOMEGA
- Additional information: 150102010 DELLO
- Lisainfo: 150102010 DELLO
-
Engine Code: EV,
PB, GZ -
Vehicle Identification Number (VIN) to: 16-
D- 270000 - not for country specific design: Sweden
- Block Separation:
- Pump Type: Mono Pump
- Voltage [V]: 12
- Number of pins: 2
-
Name: KLAASIPESUVEE PUMP,
KLAASIPUHASTUS - Manufacturer: MAX
- Required quantity: 1
-
Vehicle Identification Number (VIN) to: 16-
D- 270000 - not for country specific design: Sweden
- Fitting Position: Front
- Pump Type: Mono Pump
- Voltage [V]: 12
- Housing Diameter [mm]: 35
-
Name: Klaasipesuvee pump,
klaasipuhastus - Manufacturer: MAX
- Voltage [V]: 12
- Operating Mode: Electric
- Guarantee: 3 years guarantee
- Weight [kg]: 0.08
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 15SKV002
- Vehicle Equipment: for vehicles with rear window cleaning
- Pump Type: Dual Pump
- Voltage [V]: 12
- Number of pins: 2
-
Name: KLAASIPESUVEE PUMP,
KLAASIPUHASTUS - Manufacturer: MAX
- Voltage [V]: 12
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Number of pins: 2
- Pump Type: Dual Pump
- Manufacturer: ERA
- Operating Mode: Electric
- Fitting Position: Front and Rear
- Weight [kg]: 0.08
- Voltage [V]: 12
- Pump Type: Mono Pump
- Manufacturer: 3RG
- Required quantity: 1
-
Vehicle Identification Number (VIN) to: 16-
D- 270 000 - not for country specific design: Sweden
- Operating Mode: Electric
- Weight [kg]: 0.078
- Manufacturer: VEMO GERMANY
-
Additional information: V20-
08- 0101 VEMO -
Lisainfo: V20-
08- 0101 VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front
- Pump Type: Mono Pump
- Voltage [V]: 12
- Number of pins: 2
- Outlet Ø [mm]: 3.4
-
Name: KLAASIPESUVEE PUMP,
KLAASIPUHASTUS - Manufacturer: MEY
- for OE number: 000 860 3226
- Operating Mode: Electric
-
Name: KLAASIPESUVEE PUMP,
KLAASIPUHASTUS - Manufacturer: TRU
- Lisainfo: 01.60.001
- Additional information: 01.60.001
-
Engine Code: EV,
PB, GZ - Vehicle Identification Number (VIN) to: ******16*D*270000
- not for country specific design: Sweden
- Block Separation:
- Pump Type: Mono Pump
- Voltage [V]: 12
- Number of connectors: 2
- Weight [kg]: 0.105
-
Name: KLAASIPESUVEE PUMP,
KLAASIPUHASTUS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Required quantity: 1
-
Vehicle Identification Number (VIN) to: 16-
D- 270 000 - not for country specific design: Sweden
- Pump Type: Mono Pump
- Voltage [V]: 12
- Operating Mode: Electric
- Number of pins: 2
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Pump Type: Dual Pump
- for OE number: 1K6955651
- Manufacturer: MEAT&DORIA
- Fitting Position: Front
- Weight [kg]: 0.08
- Voltage [V]: 12
- Number of connectors: 2
- Supplementary Article/Info 2: for window cleaning system
- Pump Type: Mono Pump
- Manufacturer: METALCAUCHO
-
Engine Code: EV,
PB, GZ - Vehicle Identification Number (VIN) to: ******16*D*270000
- not for country specific design: Sweden
- Block Separation:
- Pump Type: Mono Pump
- Voltage [V]: 12
- Number of connectors: 2
- Weight [kg]: 0.105
- Name: SW 99 90 3940
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: EV,
PB, GZ -
Vehicle Identification Number (VIN) to: 16-
D- 270 000 - not for country specific design: Sweden
- Block Separation:
- Voltage [V]: 12
- Operating Mode: Electric
- Pump Type: Diaphragm Pump
- Weight [kg]: 0.066
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Vehicle Identification Number (VIN) from: 19-
G- 383 356 - only in connection with: 1J0 973 722
- Fitting Position: Front and Rear
- Vehicle Equipment: for vehicles with rear window cleaning
- Pump Type: Dual Pump
- Voltage [V]: 12
- Number of pins: 2
- Connection Diameter 1 [mm]: 3.4
- Connection Diameter 2 [mm]: 3.4
-
Name: KLAASIPESUVEE PUMP,
KLAASIPUHASTUS - Manufacturer: MEY
-
Lisainfo: 1009550010 koodiga LTD-
1K6955651 -
Additional information: 1009550010 koodiga LTD-
1K6955651
- Vehicle Equipment: for vehicles with rear window cleaning
- Voltage [V]: 12
- Operating Mode: Electric
- Guarantee: 3 years guarantee
- Weight [kg]: 0.12
- Always compare old and new part (in particular OE No.):
- Name: CE 15SKV015
- Manufacturer: ESEN SKV
- Vehicle Equipment: for vehicles with rear window cleaning
- Operating Mode: Electric
- Voltage [V]: 12
- Number of pins: 2
- Pump Type: Dual Pump
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Operating Mode: Electric
- Pump Type: Mono Pump
- Fitting Position: Front
- Manufacturer: METZGER
- Weight [kg]: 0.105
- Voltage [V]: 12
- Number of connectors: 2
- Supplementary Article/Info 2: for window cleaning system
- Pump Type: Dual Pump
- Manufacturer: METALCAUCHO
- Vehicle Equipment: for vehicles with rear window cleaning
- new version:
- Pump Type: Dual Pump
- Voltage [V]: 12
- Number of connectors: 2
- Weight [kg]: 0.105
-
Name: KLAASIPESUVEE PUMP,
KLAASIPUHASTUS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 07.1988
- Operating Mode: Electric
- Pump Type: Diaphragm Pump
- Weight [kg]: 0.083
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Operating Mode: Electric
- Pump Type: Dual Pump
- Number of connectors: 2
- Vehicle Equipment: for vehicles with rear window wiper
- Fitting Position: Front
- Manufacturer: METZGER
- Vehicle Equipment: for vehicles with rear window cleaning
- new version:
- Pump Type: Dual Pump
- Voltage [V]: 12
- Number of connectors: 2
- Weight [kg]: 0.001
-
Name: KLAASIPESUVEE PUMP,
KLAASIPUHASTUS - Manufacturer: BLP
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Vehicle Equipment: for vehicles with rear window cleaning
- new version:
- Pump Type: Dual Pump
- Voltage [V]: 12
- Number of connectors: 2
- Weight [kg]: 0.105
- Name: SW 10 92 6259
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Vehicle Equipment: for vehicles with rear window cleaning
- Voltage [V]: 12
- Length [mm]: 113
- Width [mm]: 61
- Height [mm]: 55
- Weight [kg]: 0.106
- Operating Mode: Electric
- Pump Type: Dual Pump
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of pins: 2
- Pump Type: Mono Pump
- Weight [kg]: 0.17
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Pump Type: Mono Pump
- for OE number: 3B7955681
- Manufacturer: MEAT&DORIA
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks