Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Shape: O-
Ring, round - Inner Diameter [mm]: 55
- Outer Diameter [mm]: 61
- Thickness [mm]: 3
-
Material: MVQ
(silicone rubber) -
Name: TIHEND,
EGR- KLAPP - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Material: Stainless Steel
-
Name: TIHEND,
EGR- KLAPP - Manufacturer: FIS
- Fitting Position: Lower
- Gasket Design: Fibre Composite
- Chemical Properties: Asbestos Free
- Mounting Type: Flange mounting
- Number of flange connections: 2
-
Name: TIHEND,
EGR- KLAPP - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Engine Code: BEW,
AXR -
Construction Year from: 07.2003,
06.2003 - Block Separation:
- Thickness [mm]: 1
- Width [mm]: 46
- Length [mm]: 76
-
Name: TIHEND,
EGR- KLAPP - Manufacturer: AJU
- Model Year from: 2002
- Model Year to: 2005
- Weight [kg]: 0.003
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 41
- Packaging length [cm]: 4.1
- Packaging width [cm]: 4.1
- Packaging height [cm]: 0.3
- Manufacturer: FEBEST
- Engine Code: ATD
- Shape: round
- Material: Rubber
-
Name: Tihend,
EGR- klapp - Manufacturer: MAX
-
Lisainfo: 70-
0130 -
Additional information: 70-
0130
- Inner Diameter [mm]: 32
-
Name: TIHEND,
EGR- KLAPP - Manufacturer: FIS
- Weight [kg]: 0.01
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Gasket Design: Steel
- Mounting Type: Flange mounting
- Flange Hole Diameter [mm]: 25
- Number of flange connections: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Inner Diameter [mm]: 32
- Manufacturer: ELRING
- Lisainfo: 729.970 ELR
- Additional information: 729.970 ELR
Inner Diameter [mm]: 32
- Weight [kg]: 0.007
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Inner Diameter [mm]: 22
- Manufacturer: ELRING
- Engine Code: BEW
- Fitting Position: EGR valve at manifold
- Inner Diameter [mm]: 44
- Thickness [mm]: 2.6
-
Material: FPM
(fluoride rubber) -
Shape: O-
Ring - Alternatively:
-
Supplementary Article/Supplementary Info: without gasket/
seal - Operating Mode: Pneumatic
- Manufacturer: KAMOKA
- Additional information: F19024
- Lisainfo: F19024
- Manufacturer Restriction: VAG
- Number of pins: 2
- Cable Length [mm]: 500
- Cable Cross Section [mm²]: 1
-
Contact surface: Tin-
plated -
Supplementary Article/Supplementary Info: with socket housing,
with gaskets/ seals - Supplementary Article/Info 2: with pipe
- Cable insulation material: Silicone
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- Plug housing design: Plug sleeve housing
- SVHC: No SVHC present!
-
Name: Kaabli remondikomplekt,
EGR- klapp - Manufacturer: HBE
- Fitting Position: Pipe at manifold
- Manufacturer: WAHLER
- Voltage [V]: 12
- Number of pins: 2
- Operating Mode: Electric
- Valve type: Solenoid Valve
-
for OE number: 1J0906283B,
1J0906283C, 1K0906283A, 1K0906283 - Weight [kg]: 1.1
- Packaging length [cm]: 21
- Packaging width [cm]: 21
- Packaging height [cm]: 17
- Manufacturer: AKSDASIS
Manufacturer: MAGNETI MARELLI
- Operating Mode: Pneumatic
-
Fabrication Number: EGR-
SK- 000 - Manufacturer: NTY
-
Name: NTY EGR-
SK- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Engine Code: ATD,
BEW - Block Separation:
- Construction Year to: 11.2009
-
Manufacturer Restriction: VAG,
Renault - Number of pins: 6
- Socket Width [mm]: 1.5
- Cable Cross Section [mm²]: 0.75
- Cable Length [mm]: 200
-
Contact surface: Tin-
plated -
Supplementary Article/Supplementary Info: with socket housing,
with seal - Supplementary Article/Info 2: with pipe
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- Cable insulation material: Silicone
- SVHC: No SVHC present!
-
Name: Kaabli remondikomplekt,
EGR- klapp - Manufacturer: HBE
- Supplementary Article/Supplementary Info: with seal
- Operating Mode: Pneumatic
- Manufacturer: KAMOKA
- Fitting Position: Pipe at manifold
-
Supplementary Article/Supplementary Info: without gaskets/
seals -
Fabrication Number: EGR-
AU- 046 - Number of mounting bores: 4
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Supplementary Article/Supplementary Info: without EGR cooler,
with gaskets/ seals - Operating Mode: Pneumatic
-
Fabrication Number: EGR-
CH- 011
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Construction Year to: 01.2002
- Operating Mode: Pneumatic
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Model Year from: 1998
- Model Year to: 2010
- New Part:
- Used part return not required:
-
Manufacturer: ABAKUS DEPO/
LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
-
Name: EGR-
klapp - Manufacturer: MAG
-
Name: EGR-
klapp - Manufacturer: MAG
- Lisainfo: EV080C
- Additional information: EV080C
- Fitting Position: Pipe at manifold
-
Supplementary Article/Supplementary Info: with gaskets/
seals -
Fabrication Number: EGR-
VW- 046 - Manufacturer: NTY
-
Name: NTY EGR-
VW- 046
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Operating Mode: Pneumatic
- Manufacturer: JAPKO
- Operating Mode: Pneumatic
- Always compare old and new part (in particular OE No.):
- Weight [kg]: 0.58
- Warranty: 3 years warranty
- Manufacturer: SKV GERMANY
- Name: CE 14SKV019
- Engine Code: BEW
- Weight [kg]: 0.37
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Operating Mode: Pneumatic
- Always compare old and new part (in particular OE No.):
- Weight [kg]: 0.6
- Warranty: 3 years warranty
- Manufacturer: SKV GERMANY
- Name: CE 14SKV090
- Operating Mode: Pneumatic
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Packaging length [cm]: 19
- Packaging width [cm]: 19
- Packaging height [cm]: 18
-
for OE number: 038131501E,
045131501C, 045131501L - Valve type: Diaphragm Valve
- Weight [kg]: 0.74
- Manufacturer: AKSDASIS
- Construction Year to: 01.2002
- Engine Code: ATD
- Quality class: PJ
- Name: Exhaust gas recirculation valve
- Construction Year to: 12.2001
- Supplementary Article/Supplementary Info: without EGR cooler
-
Name: EGR-
klapp - Manufacturer: NIS
Technical Information: FIRST FIT - Includes gaskets and O-rings when needed
- Supplementary Article/Supplementary Info: with seal
- Operating Mode: Pneumatic
- Quality: OE EQUIVALENT
-
Name: EGR-
klapp - Manufacturer: MD
- Construction Year to: 12.2001
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Manufacturer: NRF
- Operating Mode: Pneumatic
-
Supplementary Article/Supplementary Info: without gasket/
seal - Quality: OE EQUIVALENT
-
Name: EGR-
klapp - Manufacturer: MD
-
Name: EGR-
klapp - Manufacturer: MAG
- for OE number: 038 131 501 E
- Manufacturer: TRUCKTEC AUTOMOTIVE
- Operating Mode: Pneumatic
-
Name: EGR-
KLAPP - Manufacturer: JPA
- Engine Code: BEW
- Fitting Position: EGR valve at manifold
- Inner Diameter [mm]: 44
- Thickness [mm]: 2.6
-
Material: FPM
(fluoride rubber) -
Shape: O-
Ring
-
Supplementary Article/Supplementary Info: without EGR cooler,
with gaskets/ seals - Operating Mode: Electric
- Number of pins: 5
-
Fabrication Number: EGR-
AU- 008 - Manufacturer: NTY
-
Name: NTY EGR-
AU- 008
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Operating Mode: Electric
-
Supplementary Article/Supplementary Info: without gasket/
seal - Valve type: Control Valve
- New Part:
- Used part return not required:
-
Manufacturer: ABAKUS DEPO/
LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
- Construction Year to: 12.2001
- Operating Mode: Pneumatic
- Supplementary Article/Supplementary Info: with seal
- Weight [kg]: 0.6
- Packaging length [cm]: 21
- Packaging width [cm]: 20
- Packaging height [cm]: 19
- for OE number: 038131501N
- Operating Mode: Electric
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Lisainfo: EGR Valve
- Additional information: EGR Valve
- Construction Year from: 01.2002
-
Engine Code: ATD,
BEW - Supplementary Article/Supplementary Info: without EGR cooler
-
Name: ZAWàR EGR VW T5 1,
9TDI - Manufacturer: NIS
- Construction Year from: 01.2002
- Voltage [V]: 12
- Operating Mode: Electric
- Number of pins: 5
- Always compare old and new part (in particular OE No.):
- Weight [kg]: 0.9
- Warranty: 3 years warranty
- Manufacturer: SKV GERMANY
- Name: CE 14SKV172
-
Engine Code: ATD,
BEW - Operating Mode: Electric
- Supplementary Article/Supplementary Info: with seal
- Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
- Name: DRM 211108
- Engine Code: BEW
- Operating Mode: Electric
- Supplementary Article/Supplementary Info: with seal
- Manufacturer: WAHLER
- Construction Year from: 01.2002
- Voltage [V]: 12
- Connector Shape: oval
- Operating Mode: Electric
-
Supplementary Article/Supplementary Info: with gaskets/
seals -
Name: EGR-
klapp - Manufacturer: NRF
-
Name: EGR-
klapp - Manufacturer: MAG
- Engine Code: ATD
- Operating Mode: Pneumatic
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Manufacturer: WAHLER
- Construction Year from: 01.2002
- Supplementary Article/Supplementary Info: with seal
- Operating Mode: Electric
- Number of pins: 5
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6NU014864471
- Engine Code: BEW
- Operating Mode: Electric
- Supplementary Article/Supplementary Info: with seal
-
Manufacturer: BORGWARNER
(WAHLER)
- Operating Mode: Electric
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Number of connectors: 5
- Net weight [kg]: 0.72
-
Name: EGR-
KLAPP - Manufacturer: ELS
Price of the deposit will be added in the sum of 32.19€
- Voltage [V]: 12
- Operating Mode: Electric
- Number of connectors: 5
- Supplementary Article/Info 2: with seal ring
- Connector Shape: oval
- Number of mounting bores: 3
- Weight [kg]: 0.86
- Manufacturer: ERA
- New Part:
- Construction Year from: 01.2002
- Number of pins: 5
- Manufacturer Restriction: WAHLER
- Operating Mode: Electronic
-
Supplementary Article/Supplementary Info: with gaskets/
seals -
Name: EGR-
KLAPP - Manufacturer: TRI
- Engine Code: BEW
- Valve type: Control Valve
- Operating Mode: Electric
- Voltage [V]: 12
- Supplementary Article/Supplementary Info: with seal
-
Name: EGR-
KLAPP - Manufacturer: PIE
- Lisainfo: 7.00365.06.0
- Additional information: 7.00365.06.0
- Engine Code: ATD
- Inner Diameter [mm]: 61
- Thickness [mm]: 3
-
Material: NBR
(nitrile butadiene rubber) -
Shape: O-
Ring - Fitting Position: EGR valve at manifold
- Alternatively:
- Engine Code: ATD
- Inner Diameter [mm]: 61
- Thickness [mm]: 3
-
Material: NBR
(nitrile butadiene rubber) -
Shape: O-
Ring - Fitting Position: EGR valve at manifold
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks