• Lambda Sensor: Diagnostic Probe
• Number of circuits: 4
• Overall Length [mm]: 750
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• External Thread [mm]: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 510
• Lambda Sensor: Planar probe
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• External Thread [mm]: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 620
• Lambda Sensor: Heated
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fitting Position: after catalytic converter
• Fabrication Number: ESL-AU-007
• Manufacturer: NTY

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• External Thread [mm]: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 480
• Lambda Sensor: Planar probe
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Engine Code: AYD, BFS
• Lambda Sensor: Diagnostic Probe, Lambda Sensor
• Fitting Position: Front, after catalytic converter
• Number of circuits: 4
• Length [mm]: 480
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 750
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

• Lambda Sensor: Diagnostic Probe
• Exhaust System: after catalytic converter
• Fitting Position: Front
• Length [mm]: 940
• Number of connectors: 4
• Manufacturer: VERNET

• Fitting Position: Front, after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 720
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Number of circuits: 4
• Weight [kg]: 0.156
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Unheated
• Number of pins: 4
• Cable Length [mm]: 630
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Engine Code: BFS, AYD
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Socket colour: brown
• for OE number: 036 906 265 H
• Length [mm]: 625
• Weight [kg]: 0.171
• Thread Size: M18 x 1,5
• Connector Shape: D Shape
• Cable Length [mm]: 620
• Number of pins: 4
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Number of circuits: 4
• Exhaust System: before catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 06.2005
• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Cable Length [mm]: 700
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
BORA (1J2), 10.98-09
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
BORA (1J2), 10.98-09
(kvaliteediklass: PJ)"

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Number of circuits: 5
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-AU-002
• Manufacturer: NTY
• Name: NTY ESL-AU-002

• Resistor [Ohm]: 9
• Conductor Number: 4
• Length [mm]: 721
• Number of circuits: 4
• Cable Length [mm]: 721
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Construction Year to: 06.2005
• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 650
• Number of circuits: 4
• Weight [kg]: 0.15
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV706

• Construction Year to: 06.2005
• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 760
• Number of circuits: 4
• Weight [kg]: 0.15
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV694
• Manufacturer: ESEN SKV

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 740
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Construction Year to: 06.2005
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Length [mm]: 550
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Engine Code: AYD, BFS
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Diagnostic Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Number of pins: 5
• Overall Length [mm]: 1,510
• Lambda Sensor: Regulating Probe
• Manufacturer: JP GROUP
• Lisainfo: Lambda Sensor
• Additional information: Lambda Sensor

• Engine Code: AYD,BFS
• Line insulation design: with silicone-coated woven-fibre insulation
• Weight [kg]: 0.122
• Socket colour: brown
• Connector Shape: D Shape
• Thread Size: M18 x 1,5
• Length [mm]: 570
• for OE number: 06A 906 262 F
• Cable Length [mm]: 570
• Number of pins: 4
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Number of circuits: 4
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: before catalytic converter
• Rated Voltage [V]: 12
• Number of pins: 6
• Connector Shape: oval
• Cable Length [mm]: 1,510
• Overall Length [mm]: 1,538
• Spanner Size: 22
• Thread Size: M 18
• Thread Pitch [mm]: 1.5
• Supplementary Article/Supplementary Info: with cable tie
• Supplementary Article/Info 2: with plastic socket, with heat shield pipe
• Lubrication: with grease lubrication
• Full Set:
• Manufacturer: TOPRAN

Lambda Sensor: Regulating Probe, Broadband lambda sensor, Heated, Planar probe General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Connector/Clamp: Connector may need adjustment
• Lambda Sensor: Heated
• Overall Length [mm]: 750
• Number of pins: 4
• Recommended change interval [km]: 160,000
• General Information: lambda probe; 4 wire
• Manufacturer: VIKA

• for OE number: 022906262BG
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 650
• Number of pins: 4
• Weight [g]: 189
• Gross Weight [g]: 222
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
POLO SEDAN, 09.02-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
POLO SEDAN, 09.02-
(kvaliteediklass: Q)"

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 8
• Overall Length [mm]: 560
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Number of circuits: 5
• Length [mm]: 1,510
• Conductor Number: 5
• Cable Length [mm]: 1,510
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Fitting Position: before catalytic converter
• Lambda Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 720
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.17
• Manufacturer: VALEO
• Name: VA 368041

• Engine Code: AYD, BFS
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Length [mm]: 1,500
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: AYD, BFS
• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Length [mm]: 1,510
• Number of circuits: 5
• Weight [kg]: 0.22
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV852

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.16
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV911

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Exhaust System: before catalytic converter
• Voltage [V]: 12
• Weight [kg]: 0.16
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV907

• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe
• Cable Length [mm]: 1,500
• Number of pins: 6
• Exhaust System: before catalytic converter
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA
• Name: HE 6PA009166821

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Heated
• Conductor Number: 5
• General Information: lambda probe; 5 wire
• Manufacturer: VIKA

• Engine Code: AYD, BFS
• Number of pins: 4
• Connector Shape: D Shape
• Cable Length [mm]: 1,360
• Lambda Sensor: Regulating Probe, Broadband lambda sensor
• Fitting Position: Exhaust Manifold
• for article number: 81519
• Manufacturer: MEAT&DORIA

• Fitting Position: Front
• Line insulation design: with silicone-coated woven-fibre insulation
• Conductor Number: 5
• Thread Size: M18 x 1,5
• Connector Shape: D Shape
• Cable Length [mm]: 1,510
• Supplementary Article/Supplementary Info: with accessories
• Lambda Sensor: Broadband lambda sensor, Thread pre-greased
• Number of circuits: 5
• Weight [kg]: 0.155
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of pins: 5
• Overall Length [mm]: 1,510
• Recommended change interval [km]: 250,000
• Manufacturer: METZGER