Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Outer Diameter [mm]: 63
- Width [mm]: 24
- Lisainfo: Tension pulley for timing belt
- Additional information: Tension pulley for timing belt
- Outer Diameter [mm]: 66
- Width [mm]: 24
- Manufacturer: JP GROUP
- Lisainfo: Tension pulley for timing belt
- Additional information: Tension pulley for timing belt
- Outer Diameter [mm]: 73
- Width [mm]: 27
- Lisainfo: Tension pulley for timing belt
- Additional information: Tension pulley for timing belt
- Diameter [mm]: 63
- Width [mm]: 24
- Tensioner Pulley Actuation: Automatic
-
Name: SEADE-
/ JUHTRULL, HAMMASRIHM - Manufacturer: MAX
Manufacturer: DELLO AUTOMEGA
- Diameter [mm]: 73
- Width [mm]: 27
- Tensioner Pulley Actuation: Automatic
-
Name: SEADE-
/ JUHTRULL, HAMMASRIHM - Manufacturer: MAX
- Driven Units: Injection pump
- Width [mm]: 24
- Outer Diameter [mm]: 66
- Manufacturer: KAMOKA
- Width [mm]: 24
- Outer Diameter [mm]: 63
- Manufacturer: OPTIMAL
- Diameter [mm]: 66
- Width [mm]: 24
- Tensioner Pulley Actuation: Automatic
-
Name: SEADE-
/ JUHTRULL, HAMMASRIHM - Manufacturer: MAX
- Supplementary Article/Supplementary Info: with attachment material
- Supplementary Article/Info 2: with screw
- Width [mm]: 27
- Outer Diameter [mm]: 73
- Manufacturer: KAMOKA
- Width [mm]: 24
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 63
- for OE number: 074130245
- Supplementary Article/Info 2: without screw set
- Manufacturer: SASIC
-
Vehicle Identification Number (VIN) from: 2D-
1H037243 -
Material: Polyamid 6,
Polyamid 6.6 - Diameter [mm]: 81.5
- Width [mm]: 26.5
- Weight [kg]: 0.25
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Width [mm]: 27
- Outer Diameter [mm]: 73
- Height [mm]: 35.1
- Manufacturer: OPTIMAL
- Width 1 [mm]: 24
- Outer Diameter 1 [mm]: 63
-
Manufacturer: SNR /
NTN- SNR/ - Name: SN GT365.05
- Driven Units: Injection pump
- Fitting Position: Lower
- Outer Diameter [mm]: 63
- Width [mm]: 24
- SVHC: No SVHC present!
-
Name: PINGUTUSRULL,
HAMMASRIHM - Manufacturer: INA
- Driven Units: Camshaft
- Inner Diameter [mm]: 8
- Outer Diameter [mm]: 73
- Width [mm]: 27
- Material: Plastic
- Supplementary Article/Supplementary Info: with holder
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Width [mm]: 24
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 63
- Weight [kg]: 0.197
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Lower
- Driven Units: Injection pump
- Diameter [mm]: 63
- Width [mm]: 24
- Tensioner Pulley Actuation: Automatic
-
Name: PINGUTUSRULL,
HAMMASRIHM - Manufacturer: SKF
- Width 1 [mm]: 27
- Outer Diameter 1 [mm]: 73
- Manufacturer: SNR
- Name: SN GT357.33
- Outer Diameter [mm]: 73
- Width [mm]: 27
- Observe service information:
- SVHC: No SVHC present!
-
Name: PINGUTUSRULL,
HAMMASRIHM - Manufacturer: INA
- Diameter [mm]: 73
- Width [mm]: 27
- Tensioner Pulley Actuation: Automatic
-
Name: PINGUTUSRULL,
HAMMASRIHM - Manufacturer: SKF
- Width [mm]: 27
- Inner Diameter [mm]: 8
- Outer Diameter [mm]: 73
- Material: Plastic
- Weight [kg]: 0.367
- Supplementary Article/Info 2: with screw
- Observe service information:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Width 1 [mm]: 24
- Outer Diameter 1 [mm]: 66
- Manufacturer: SNR
- Driven Units: Injection pump
- Fitting Position: Upper
- Outer Diameter [mm]: 66
- Width [mm]: 24
- Follow installation instructions:
- SVHC: No SVHC present!
-
Name: PINGUTUSRULL,
HAMMASRIHM - Manufacturer: INA
- Width [mm]: 24
- Inner Diameter [mm]: 8
- Outer Diameter [mm]: 66
- Weight [kg]: 0.311
-
Name: PINGUTUSRULL,
HAMMASRIHM - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Upper
- Diameter [mm]: 66
- Width [mm]: 24
- Tensioner Pulley Actuation: Automatic
-
Name: PINGUTUSRULL,
HAMMASRIHM - Manufacturer: SKF
- Construction Year to: 06.2006
- Driven Units: Camshaft
- Surface: Smooth
- Outer Diameter [mm]: 73
- Width [mm]: 27
- Manufacturer: GATES
- Construction Year to: 06.2006
- Driven Units: Injection pump
- Surface: Smooth
- Outer Diameter [mm]: 65.5
- Width [mm]: 24.5
- Manufacturer: GATES NAPINACZE
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks