Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Inner Diameter [mm]: 43.95
-
Lisainfo: Seal,
turbo air hose -
Additional information: Seal,
turbo air hose
- Model Year from: 2002
- Inner Diameter [mm]: 44
- Outer Diameter [mm]: 53
- Manufacturer: FEBEST
- Construction Year from: 07.2001
- Inner Diameter [mm]: 57.85
-
Material: FPM
(fluoride rubber) - Manufacturer: ELRING
-
Material: FPM
(fluoride rubber) - Inner Diameter [mm]: 61.9
- Manufacturer: ELRING
- Model Year from: 2002
- Inner Diameter [mm]: 58
- Manufacturer: FEBEST
- Inner Diameter [mm]: 57.85
- Manufacturer: DR.MOTOR
- Fitting Position: Charge Air Cooler
- Name: DRM 01675
- Manufacturer: DR.MOTOR AUTOMOTIVE
- for OE number: 3C0145117J
- Weight [g]: 11
- Name: IM 20280
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- Inner Diameter [mm]: 61.9
- Shape: Ring Form
-
Material: FPM
(fluoride rubber) - Always compare old and new part (in particular OE No.):
-
Alternative Repair Kit: 2400113,
2400121 - Manufacturer: METZGER
- Inner Diameter [mm]: 57.85
- Shape: Ring Form
-
Material: FPM
(fluoride rubber) - Always compare old and new part (in particular OE No.):
-
Alternative Repair Kit: 2400113,
2400118, 2400119, 2400129, 2400277 - Manufacturer: METZGER
- Model Year from: 2002
- Inner Diameter [mm]: 62
- Manufacturer: FEBEST
- for OE number: 3C0145117H
- Weight [g]: 13
- Name: IM 20281
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- Quantity per packing unit: 10
- Diameter [mm]: 56
- Manufacturer: VIEROL
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- OE-numbri jaoks: 1J0 145 822 E
- Materjal: kumm koos koekihiga
-
Seerianumber: GPP-
VW- 010 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fabrication Number: GPP-
VW- 006 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Materjal: kumm koos koekihiga
-
Seerianumber: GPP-
VW- 011 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Construction Year from: 07.2001
- Quantity per packing unit: 5
-
Shape: O-
Ring - Inner Diameter [mm]: 58
- Thickness [mm]: 4.5
-
Material: FPM
(fluoride rubber) - Alternatively:
-
Fitting Position: Lower,
Front - Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- for OE number: 1J0 145 834 AA
- Manufacturer: KAMOKA
- Model Year from: 2002
- Quantity: 10
- Inner Diameter [mm]: 58.5
- Outer Diameter [mm]: 69.1
- Thickness [mm]: 4.6
- Manufacturer: FEBEST
- Quantity per packing unit: 5
- Inner Diameter [mm]: 43.95
- Quantity: 5
- Manufacturer: DR.MOTOR
- for OE number: 1J0145822E
- Manufacturer: KAMOKA
-
Turbocharger Line: Hot Side,
Turbocharger to piping - Construction Year from: 05.2002
- Hose Length [mm]: 290
- Inner Diameter 1 [mm]: 37
- Inner Diameter 2 [mm]: 37
- Manufacturer: DENCKERMANN FILTRY
Vehicle Identification Number (VIN) from: 1J-2B016 331, 1J-2D014 211, 1J-2P032 201, 1J-2W108 601
- Quantity per packing unit: 5
-
Material: FPM
(fluoride rubber) -
Shape: O-
Ring - Inner Diameter [mm]: 62
- Thickness [mm]: 4.3
- Quantity Unit: Packing Unit
- General Information: Turbo charger oil pipe
- Manufacturer: VIKA
- Fitting Position: Left
- Lisainfo: Charger Intake Hose
- Additional information: Charger Intake Hose
- for OE number: 1J0145838T
- Weight [g]: 275
- Plug connector manufacturer: HENN
- Length [mm]: 248
- Inner Diameter 1 [mm]: 51
- Inner Diameter 2 [mm]: 47
- Name: IM 222011
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- General Information: Turbo charger air pipe
- Manufacturer: VIKA
- General Information: Turbo charger air pipe
- Manufacturer: VIKA
- for OE number: 1J0145822E
- Manufacturer: MEAT&DORIA
- General Information: Turbo charger air pipe
- Manufacturer: VIKA
-
Production date from: 01/
03 -
Fitting Position: Charge Air Cooler,
Outlet - for OE number: 1J0145834AA
- Manufacturer: SASIC
- Turbocharger Line: Piping to charge air cooler
-
Material: ACM
(Polyacrylate) -
Fitting Position: Charge Air Cooler,
Left - Weight [kg]: 0.26
- Supplementary Article/Info 2: with quick couplers
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) to: 1J-
2B016330, 1J- 2D014210, 1J- 2P032200, 1J- 2W108600 -
Fitting Position: Lower,
engine sided -
Supplementary Article/Supplementary Info: with gaskets/
seals - Hose Type: Moulded Hose
- Supplementary Article/Info 2: with quick couplers
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Length [mm]: 330
- for OE number: 1J0 145822 E
-
Fitting Position: Charge Air Cooler,
Lower - Outer Diameter [mm]: 50
- Manufacturer: BUGIAD
- Fitting Position: Right Front
-
Cooling Hose: Charge air cooler to piping,
Cold Side - Guarantee: 3 years guarantee
- Weight [kg]: 0.39
- Always compare old and new part (in particular OE No.):
- Name: CE 24SKV161
- Manufacturer: ESEN SKV
- for OE number: 38253016DX
- Weight [g]: 283
- Plug connector manufacturer: HENN
- Length [mm]: 261
- Inner Diameter 1 [mm]: 37
- Inner Diameter 2 [mm]: 37
- Name: IM 221160
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- Construction Year from: 05.2002
-
Turbocharger Line: Hot Side,
Turbocharger to piping - Material: Silicone
- Colour: Orange
- Hose Length [mm]: 290
- Inner Diameter 1 [mm]: 37
- Inner Diameter 2 [mm]: 37
- Observe broschure:
-
Manufacturer: GATES-
PRZEWODY
Vehicle Identification Number (VIN) from: 1J-2B016 331, 1J-2D014 211, 1J-2P032 201, 1J-2W108 601
- Construction Year from: 05.2002
-
Turbocharger Line: Hot Side,
Turbocharger to piping - Material: Silicone
- Supplementary Article/Info 2: with hose clip
- Colour: Orange
- Hose Length [mm]: 290
- Inner Diameter 1 [mm]: 37
- Inner Diameter 2 [mm]: 37
- Observe broschure:
-
Manufacturer: GATES-
PRZEWODY
Vehicle Identification Number (VIN) from: 1J-2B016 331, 1J-2D014 211, 1J-2P032 201, 1J-2W108 601
-
Production date to: 12/
01 - for OE number: 1J0145828R
- Manufacturer: SASIC
- Construction Year from: 05.2002
-
Turbocharger Line: Hot Side,
Turbocharger to piping - Material: Silicone
- Colour: Orange
- Hose Length [mm]: 249
- Inner Diameter 1 [mm]: 37
- Inner Diameter 2 [mm]: 37
- Observe broschure:
- Manufacturer: GATES
Vehicle Identification Number (VIN) to: 1J-2B016 330, 1J-2D014 210, 1J-2P032 200, 1J-2W108 600
-
Fitting Position: Throttle Housing,
Upper - Supplementary Article/Info 2: with quick couplers
- Article number of recommended accessories: 2400582
- Manufacturer: METZGER
- Construction Year from: 05.2002
-
Turbocharger Line: Cold Side,
Charge air cooler to piping -
Material: PE
(Polyethylene) - Colour: black
- Hose Length [mm]: 320
- Inner Diameter 1 [mm]: 52
- Inner Diameter 2 [mm]: 52
- Observe broschure:
- Manufacturer: GATES
- Construction Year from: 05.2002
-
Turbocharger Line: Cold Side,
Piping to engine block -
Material: AEM
(Ethylene Acrylate Rubber) - Colour: black
- Hose Length [mm]: 480
- Inner Diameter 1 [mm]: 42
- Inner Diameter 2 [mm]: 42
- Observe broschure:
- Manufacturer: GATES
- Construction Year from: 05.2002
-
Turbocharger Line: Cold Side,
Piping to engine block -
Material: AEM
(Ethylene Acrylate Rubber) - Supplementary Article/Info 2: with hose clip
- Colour: black
- Hose Length [mm]: 480
- Inner Diameter 1 [mm]: 42
- Inner Diameter 2 [mm]: 42
- Observe broschure:
-
Manufacturer: GATES-
PRZEWODY
- Construction Year from: 07.2001
- Quantity per packing unit: 100
-
Shape: O-
Ring - Inner Diameter [mm]: 58
- Thickness [mm]: 4.5
-
Material: FPM
(fluoride rubber)
- Quantity per packing unit: 100
-
Shape: O-
Ring -
Material: FPM
(fluoride rubber) - Inner Diameter [mm]: 62
- Thickness [mm]: 4.3
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks