Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Diameter 4 [mm]: 23
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 23
- Length from [mm]: 26
- Name: Stabilizer mount left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
VW GOLF 4/OCTAV/LEON
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
VW GOLF 4/OCTAV/LEON
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: GSP
- Quantity per packing unit: 2
-
Fitting Position: Front Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 21
- Inner Diameter [mm]: 19.5
- Length [mm]: 25
- Width [mm]: 37
- Height [mm]: 40
- for OE number: 1J0411314R
- Manufacturer: SASIC
-
Stabiliser Bar Diameter [mm]: 20.7,
21 - Block Separation:
- Quantity per packing unit: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Mounting Type: Rubber Mount
- Inner Diameter [mm]: 21
- Replace in pairs only:
- new version:
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Stabiliser Bar Diameter [mm]: 23
-
Vehicle Identification Number (VIN) from: 1J-
1- 000001 -
Vehicle Identification Number (VIN) to: 1J-
4- 060000 - Quantity per packing unit: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Mounting Type: Rubber Mount
- Replace in pairs only:
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Front Axle Left,
Front Axle Right - for OE number: 1J0 411 314 G
- Manufacturer: GSP
- Quantity per packing unit: 2
-
Fitting Position: Front Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 23
- Inner Diameter [mm]: 21.5
- Length [mm]: 25
- Width [mm]: 37
- Height [mm]: 40
- for OE number: 1J0411314T
- Manufacturer: SASIC
- Stabiliser Bar Diameter [mm]: 19
- Construction Year to: 01.2005
- Quantity per packing unit: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Mounting Type: Rubber Mount
- Replace in pairs only:
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
for PR number: 0AL,
0AM - Block Separation:
- Fitting Position: Front Axle
- Inner Diameter [mm]: 18
- Manufacturer: OYODO
-
for PR number: 0AL,
0AM - Block Separation:
- Inner Diameter [mm]: 19
- Observe service information:
-
Fitting Position: Front Axle Left,
Front Axle Right -
Name: Paigutus -
Kndmik VW P. GOLF 4 WEW - Manufacturer: MAX
-
Fitting Position: Front Axle,
Left, Right - Diameter [mm]: 21
- Required quantity: 2
- Manufacturer: OYODO
-
Fitting Position: inner,
Front Axle - Mounting Type: Rubber Mount
- Length [mm]: 25
- Required quantity: 2
- Weight [kg]: 0.02
- Inner Diameter [mm]: 20
-
Name: Kinnitus,
stabilisaator - Manufacturer: TED
- Fitting Position: Front Axle both sides
- Weight [kg]: 0.06
-
Material: Rubber with fabric lining,
Rubber - Required quantity: 2
- Inner Diameter [mm]: 19
- General Information: Rubber bush for stabilizer bar; 19mm
- Manufacturer: VIKA
-
for PR number: 0AL,
0AM - Block Separation:
- new version:
- Inner Diameter [mm]: 18
- Fitting Position: Front Axle
- Weight [kg]: 0.026
- Observe service information:
-
Name: Paigutus -
Kndmik VW P. GOLF 4 WEW - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Installatsiooni pool: esisild mõlemapoolselt
- Materjal: Metall
- Manufacturer: MERTZ
- Quantity per packing unit: 2
- Fitting Position: Front Axle both sides
- Material: Sheet Steel
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Weight [kg]: 0.05
- Required quantity: 2
- Fitting Position: Front
- General Information: Rubber bush clamp for stabilizer bar
- Manufacturer: VIKA
- Fitting Position: Front
- Stabiliser Bar Diameter [mm]: 23
-
Name: Paigutus -
Kndmik VW P. GOLF 4 WEW - Manufacturer: MAX
- Fitting Position: Front Axle both sides
- Weight [kg]: 0.06
- Material: Rubber
- Required quantity: 2
- Inner Diameter [mm]: 21
- General Information: Rubber bush for stabilizer bar; 21mm
- Manufacturer: VIKA
-
Fitting Position: Front Axle,
inner - Mounting Type: Rubber Mount
- Inner Diameter [mm]: 19
- Stabiliser Bar Diameter [mm]: 21
- SVHC: No SVHC present!
-
Name: Kinnitus,
stabilisaator - Manufacturer: FAG
- Quantity per packing unit: 5
-
Fitting Position: Front Axle,
Centre - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Stabiliser Bar Diameter [mm]: 21.7
- Length [mm]: 48
- Width [mm]: 30
- Thickness [mm]: 40
- Inner Diameter [mm]: 22
- Outer Diameter [mm]: 48
- Material: Rubber
- Fitting Position: Rear Axle
- Weight [kg]: 0.034
-
Name: Kinnitus,
stabilisaator - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle both sides
-
Name: KINNITUS,
STABILISAATORIPAIGUTUS - Manufacturer: MAX
-
Fitting Position: Front Axle Left,
Front Axle Right - for OE number: 1J0 411 314 S
- Manufacturer: GSP AUTOMOTIVE
-
Fitting Position: Left,
Right, inner, outer - Construction Year from: 05.2002
- for combined PR number: 0AE
- Required quantity: 2
- Diameter [mm]: 23
- Mounting Type: Rubber Mount
- Weight [kg]: 0.1
- Packaging length [cm]: 11
- Packaging width [cm]: 6
- Packaging height [cm]: 6
- Manufacturer: MONROE
-
Fitting Position: Rear Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 21.7
- Inner Diameter [mm]: 20.2
- Length [mm]: 30
- Width [mm]: 48
- Height [mm]: 41
- for OE number: 1J0511423
- Manufacturer: SASIC
- Inner Diameter [mm]: 21
- Mounting Type: Rubber Mount
- Name: Stabilizer mount left=right
- Quality class: PJ
Fitting Position: Front Axle both sides, outer, Front Axle Left, Front Axle Right
Lisainfo: "Tootja: SRL
VW GOLF 4/OCTAV/LEON
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
VW GOLF 4/OCTAV/LEON
(kvaliteediklass: PJ)"
- old version:
- Inner Diameter [mm]: 21
-
Material: Rubber,
Rubber with fabric lining - Fitting Position: Front Axle
- Weight [kg]: 0.06
- Observe service information:
-
Name: Paigutus -
Kndmik VW P. GOLF 4 WEW - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Axle beam
- General Information: Rubber bush for stabilizer bar
- Manufacturer: BORSEHUNG
- Stabiliser Bar Diameter [mm]: 21.7
- Quantity per packing unit: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Mounting Type: Rubber Mount
- Replace in pairs only:
- Quantity per axle: 2
- Manufacturer: HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Front Axle Left,
Front Axle Right - Mounting Type: Rubber Mount
- Inner Diameter [mm]: 21
- Stabiliser Bar Diameter [mm]: 21
-
Guarantee: 3 years guarantee or up to 75,
000km - Alternative Repair Kit: 52056548
- Manufacturer: METZGER
-
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
- Stabiliser Bar Diameter [mm]: 23
-
Name: Paigutus -
Kndmik VW P. GOLF 4 WEW - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
- Weight [kg]: 0.04
-
Fitting Position: Rear Axle,
inner - Stabiliser Bar Diameter [mm]: 21.7
- Required quantity: 2
- Manufacturer: TEDGUM
- Fitting Position: Front
- Manufacturer: KAMOKA
- Fitting Position: Front Axle both sides
- Inner Diameter [mm]: 21
- Outer Diameter [mm]: 39
- Length [mm]: 37
- Name: ALT 83245PAAL
- Manufacturer: ALTE AUTOMOTIVE
- Fitting Position: Front Axle both sides
- Inner Diameter [mm]: 19
- Outer Diameter [mm]: 39
- Length [mm]: 37
- Name: ALT 83244PAAL
- Manufacturer: ALTE AUTOMOTIVE
-
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
- Bore Diameter [mm]: 21
-
Name: Kinnitus,
stabilisaator - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 17
- Stabiliser Bar Diameter [mm]: 19
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 819011810
-
Installatsiooni pool: esisild mõlemapoolselt,
all - Laagritüüp: Kummipuks
- Siseläbimõõt [mm]: 21
-
Pikkus (mm): 24,
6 -
Kaal (kg): 0,
024 - Manufacturer: RTS
- Fitting Position: Front Axle both sides
- Required quantity: 2
- paired article number: VKDS 351004
- Height [mm]: 37
- Inner Diameter [mm]: 19
- Manufacturer: SKF
- Name: SK VKDS351004
- Fitting Position: Front Axle
- Manufacturer: GSP ZAWIESZENIE
-
Fitting Position: Front,
inner, Left, Right - for PR number: 0AE
- Quantity per packing unit: 2
- Inner Diameter 1 [mm]: 21
- Thickness 1 [mm]: 25
- Manufacturer: DELPHI
- Name: DE TD561W
- Stabiliser Bar Diameter [mm]: 18
- Pikkus (mm): 48
- Laius (mm): 30
- Jämedus/Tugevus (mm): 30
-
Siseläbimõõt [mm]: 16,
2 - Materjal: Kumm
- Installatsiooni pool: Tagasild
-
Kaal (kg): 0,
037 -
Name: Kinnitus,
stabilisaator - Manufacturer: FEB
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle both sides
- Required quantity: 2
- Inner Diameter [mm]: 21
- paired article number: VKDS 351005
- Manufacturer: SKF
- Name: SK VKDS351005
- Weight [kg]: 0.05
- Required quantity: 2
- Fitting Position: Front
- General Information: Rubber bush kit for stabilizer bar
- Manufacturer: VIKA
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.05
- Observe service information:
-
Name: KINNITUS,
STABILISAATORIPAIGUTUS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front,
inner, Left, Right - for PR number: 0AL
- Quantity per packing unit: 2
- Inner Diameter 1 [mm]: 19
- Thickness 1 [mm]: 25
- Manufacturer: DELPHI
- Name: DE TD560W
-
for PR number: 0AL,
0AM - Block Separation:
- Inner Diameter [mm]: 19
- Observe service information:
-
Fitting Position: Front Axle Left,
Front Axle Right -
Name: Paigutus -
Kndmik VW P. GOLF 4 WEW 19MM Z OBEJM¤ - Manufacturer: MAX
- Inner Diameter [mm]: 21
- Fitting Position: Front Axle
- Supplementary Article/Supplementary Info: with holder
-
Name: Paigutus -
Kndmik VW P. GOLF 4 WEW 21MM Z OBEJM¤ - Manufacturer: MAX
-
Fitting Position: Front Axle Left,
Front Axle Right, inner - Required quantity: 2
- Diameter [mm]: 21
- Weight [kg]: 0.1
- Packaging length [cm]: 11
- Packaging width [cm]: 6
- Packaging height [cm]: 6
- Manufacturer: MONROE
-
Fitting Position: Front Axle Left,
Front Axle Right, inner - Vehicle Identification Number (VIN) from: 1JY000001
- Inner Diameter [mm]: 20
- Outer Diameter [mm]: 36
- Length [mm]: 26
- Stabiliser Bar Diameter [mm]: 21
- paired article number: 270725
- Weight [kg]: 0.03
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: ABS
-
for PR number: 0AL,
0AM - Block Separation:
- Inner Diameter [mm]: 18
- Fitting Position: Front Axle
- Weight [kg]: 0.076
- Supplementary Article/Info 2: with screw
- Supplementary Article/Supplementary Info: with holder
- Observe service information:
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Ootshoovad - Kndmik. VW P. GOLF4/A3 18MM KPL. ZE RUB¤ NA JEDN¤ STRON¨
- Fitting Position: Front Axle
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 819020810
- Fitting Position: Front Axle both sides
- Inner Diameter [mm]: 21
- Stabiliser Bar Diameter [mm]: 23
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Colour: red
-
Material: PU
(Polyurethane) -
Fitting Position: inner,
Front Axle - Weight [kg]: 0.02
- Inner Diameter [mm]: 20
- Supplementary Article/Info 2: with grease cap
- Length [mm]: 25
- Required quantity: 2
- Shore-A hardness value, base body: 80
-
Name: Kinnitus,
stabilisaator - Manufacturer: TED
- for PR number: 0AE
- Inner Diameter [mm]: 21
- Fitting Position: Front Axle
- Weight [kg]: 0.11
- Supplementary Article/Info 2: with screw
- Supplementary Article/Supplementary Info: with holder
-
Name: Paigutus -
Kndmik VW P. GOLF 4 WEW - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Shore-A hardness value, base body: 80
- Weight [kg]: 0.022
- Colour: red
-
Material: PU
(Polyurethane) - Length [mm]: 25
- Required quantity: 2
-
Fitting Position: inner,
Front Axle - Supplementary Article/Info 2: with grease cap
- Inner Diameter [mm]: 21
- Manufacturer: TEDGUM
- Name: TG TED99395
- Fitting Position: Front Axle
- Manufacturer: MAGNETI MARELLI
-
Fitting Position: inner,
Front Axle - Supplementary Article/Info 2: with grease cap
- Length [mm]: 25
- Colour: red
-
Material: PU
(Polyurethane) - Required quantity: 2
- Weight [kg]: 0.023
- Inner Diameter [mm]: 19
- Shore-A hardness value, base body: 80
- Manufacturer: TEDGUM
- Fitting Position: Front Axle Right
- Manufacturer: MAGNETI MARELLI
- Colour: red
- Inner Diameter [mm]: 17
- Shore-A hardness value, base body: 80
- Required quantity: 2
- Length [mm]: 25
-
Fitting Position: Front Axle,
inner - Supplementary Article/Info 2: with grease cap
- Weight [kg]: 0.05
-
Material: PU
(Polyurethane) - Manufacturer: TEDGUM
- Fitting Position: Front Axle Left
- Manufacturer: MAGNETI MARELLI
- for PR number: 0AE
- Inner Diameter [mm]: 21
- Material: Plastic
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.704
- Supplementary Article/Info 2: with coupling rod
- Observe service information:
-
Name: Remondikomplekt,
stabilisaatori otsavarras - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks