• Vehicle Identification Number (VIN) to: 1J-X-999 000, 1J-Y-800 000
• Installatsiooni pool: esisild vasakul, esisild paremal
• Siseläbimõõt [mm]: 14
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

Lisainfo: "Tootja: TEKNOROT
VW GOLF4/OCTAVIA/ A3
(kvaliteediklass: PJ)"

• Diameter 4 [mm]: 23
• Installatsiooni pool: esisild vasakul, esisild paremal
• Siseläbimõõt [mm]: 23
• pikkus [mm]: 26
• Name: Stabilizer mount left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
VW GOLF 4/OCTAV/LEON
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
VW GOLF 4/OCTAV/LEON
(kvaliteediklass: PJ)"

• for PR number: 0AL
• Installatsiooni pool: esisild vasakul, esisild paremal
• Siseläbimõõt [mm]: 19
• Manufacturer: JP GROUP

• for PR number: 0AE
• Installatsiooni pool: esisild vasakul, esisild paremal
• Siseläbimõõt [mm]: 21
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Installatsiooni pool: ees
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

Lisainfo: AUDI A3

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: GSP

• Quantity per packing unit: 2
• Installatsiooni pool: Esisild, sees
• Laagritüüp: Kummipuks
• Stabilisaatori läbimõõt [mm]: 21
• Siseläbimõõt [mm]: 19,5
• Pikkus (mm): 25
• Laius (mm): 37
• Kõrgus (mm): 40
• OE-numbri jaoks: 1J0411314R
• Manufacturer: SASIC

• Vehicle Identification Number (VIN) to: 1J-4-220 000*, 1J-Y-900 000*
• Vehicle Identification Number (VIN) from: 1J-1-000 001*, 1J-Y-000 001
• Fitting Position: Front Axle Left, Front Axle Right
• Laagritüüp: Kummipuks
• Siseläbimõõt [mm]: 20
• Manufacturer: DELLO AUTOMEGA

• Stabiliser Bar Diameter [mm]: 20.7, 21
• Block Separation:
• Quantity per packing unit: 2
• Installatsiooni pool: esisild vasakul, esisild paremal
• Laagritüüp: Kummipuks
• Siseläbimõõt [mm]: 21
• ainult paarina välja vahetada:
• uus mudel:
• Hulk telje kohta: 2
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle, inner
• Laagritüüp: Kummipuks
• Siseläbimõõt [mm]: 21
• Stabilisaatori läbimõõt [mm]: 23
• SVHC: SVHS aineid ei esine
• Name: Kinnitus,stabilisaator
• Manufacturer: FAG

• Stabiliser Bar Diameter [mm]: 23
• Vehicle Identification Number (VIN) from: 1J-1-000001
• Vehicle Identification Number (VIN) to: 1J-4-060000
• Quantity per packing unit: 2
• Installatsiooni pool: esisild vasakul, esisild paremal
• Laagritüüp: Kummipuks
• ainult paarina välja vahetada:
• Hulk telje kohta: 2
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Left, Front Axle Right
• OE-numbri jaoks: 1J0 411 314 G
• Manufacturer: GSP

• Diameter 4 [mm]: 17
• Installatsiooni pool: ees
• pikkus üle kõige (mm): 25,5
• Siseläbimõõt [mm]: 17
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Quantity per packing unit: 2
• Installatsiooni pool: Esisild, sees
• Laagritüüp: Kummipuks
• Stabilisaatori läbimõõt [mm]: 23
• Siseläbimõõt [mm]: 21,5
• Pikkus (mm): 25
• Laius (mm): 37
• Kõrgus (mm): 40
• OE-numbri jaoks: 1J0411314T
• Manufacturer: SASIC

• Installatsiooni pool: esisild vasakul, esisild paremal
• Pikkus (mm): 25
• Laius (mm): 37
• Kõrgus (mm): 36
• Siseläbimõõt [mm]: 21
• Manufacturer: 3RG

• Installatsiooni pool: Esisild
• Läbimõõt [mm]: 23
• Manufacturer: OYODO

• Stabiliser Bar Diameter [mm]: 19
• Construction Year to: 01.2005
• Quantity per packing unit: 2
• Installatsiooni pool: esisild vasakul, esisild paremal
• Laagritüüp: Kummipuks
• ainult paarina välja vahetada:
• Hulk telje kohta: 2
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) from: 1J-1-000 001*, 1J-Y-600 001*
• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) to: 1J-Y-900 000*, 1J-Y-900 000
• Siseläbimõõt [mm]: 21
• Laagritüüp: Kummipuks
• Manufacturer: DELLO AUTOMEGA

• for PR number: 0AL, 0AM
• Block Separation:
• Installatsiooni pool: Esisild
• Siseläbimõõt [mm]: 18
• Manufacturer: OYODO

• for PR number: 0AL, 0AM
• Block Separation:
• Siseläbimõõt [mm]: 19
• Hooldusinfot jälgida:
• Installatsiooni pool: esisild vasakul, esisild paremal
• Name: Paigutus - K„„ndmik VW P. GOLF 4 WEW
• Manufacturer: MAX

• Quantity per packing unit: 4
• Installatsiooni pool: Esisild
• Kaal (kg): 0,02
• Siseläbimõõt [mm]: 21
• Laagritüüp: Kummipuks
• Kaal (g): 20
• Manufacturer: METALCAUCHO

• Fitting Position: Front Axle, Left, Right
• Läbimõõt [mm]: 21
• vajaminev tükihulk: 2
• Manufacturer: OYODO

• Quantity per packing unit: 4
• Laagritüüp: Kummipuks
• Installatsiooni pool: esisild vasakul, esisild paremal
• Siseläbimõõt [mm]: 22
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity per packing unit: 2
• Installatsiooni pool: Esisild
• Kaal (kg): 0,022
• Siseläbimõõt [mm]: 20, 21
• Laagritüüp: Kummipuks
• Kaal (g): 22
• Manufacturer: METALCAUCHO

• Installatsiooni pool: sees, Esisild
• Laagritüüp: Kummipuks
• Pikkus (mm): 25
• vajaminev tükihulk: 2
• Kaal (kg): 0,02
• Siseläbimõõt [mm]: 20
• Name: Kinnitus,stabilisaator
• Manufacturer: TED

• Fitting Position: Front Axle
• Quantity: 2
• Installatsiooni pool: esisild mõlemapoolselt
• Kaal (kg): 0,06
• Materjal: kumm koos koekihiga, Kumm
• vajaminev tükihulk: 2
• Siseläbimõõt [mm]: 19
• Üldine informatsioon: Rubber bush for stabilizer bar; 19mm
• Manufacturer: VIKA

• Installatsiooni pool: esisild mõlemapoolselt
• Materjal: Metall
• Manufacturer: MERTZ

• Quantity per packing unit: 2
• Installatsiooni pool: esisild mõlemapoolselt
• Materjal: Raudplekk
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for PR number: 0AL, 0AM
• Block Separation:
• uus mudel:
• Siseläbimõõt [mm]: 18
• Installatsiooni pool: Esisild
• Kaal (kg): 0,026
• Hooldusinfot jälgida:
• Name: Paigutus - K„„ndmik VW P. GOLF 4 WEW
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right, inner
• Construction Year to: 09.2003
• Siseläbimõõt [mm]: 21
• Välisläbimõõt [mm]: 37
• Pikkus (mm): 19
• paaris tootenumbrid: 270726
• Kaal (kg): 0,02
• Montaažiinfo: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Fitting Position: Front Axle
• Quantity: 2
• Kaal (kg): 0,05
• vajaminev tükihulk: 2
• Installatsiooni pool: ees
• Üldine informatsioon: Rubber bush clamp for stabilizer bar
• Manufacturer: VIKA

• Fitting Position: Lower, Front Axle both sides
• for PR number: 0AE
• Installatsiooni pool: esisild vasakul, esisild paremal
• Siseläbimõõt [mm]: 10
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Installatsiooni pool: ees
• Stabilisaatori läbimõõt [mm]: 23
• Name: Paigutus - K„„ndmik VW P. GOLF 4 WEW
• Manufacturer: MAX

• Construction Year from: 05.2001
• Vehicle Identification Number (VIN) to: 1K-4-000 000
• Fitting Position: Right, Left
• Installatsiooni pool: Esisild
• Läbimõõt [mm]: 19
• Kaal (kg): 0,02
• Manufacturer: CORTECO

• Construction Year to: 05.2006
• Fitting Position: both sides
• Kvaliteet: OE Performance
• Materjal: Kumm
• Installatsiooni pool: ees
• Värv: must
• Kaal (g): 24
• Siseläbimõõt [mm]: 21
• Manufacturer: GATES

• Installatsiooni pool: esisild vasakul, esisild paremal
• Pikkus (mm): 25
• Laius (mm): 39
• Kõrgus (mm): 37
• Siseläbimõõt [mm]: 23
• Manufacturer: 3RG

• Installatsiooni pool: esisild paremal, esisild vasakul
• Materjal: Metall
• Manufacturer: 3RG

• Fitting Position: Front Axle
• Quantity: 2
• Vehicle Identification Number (VIN) to: 1J-4-060 000
• Installatsiooni pool: esisild mõlemapoolselt
• Kaal (kg): 0,06
• Materjal: Kumm
• vajaminev tükihulk: 2
• Siseläbimõõt [mm]: 21
• Üldine informatsioon: Rubber bush for stabilizer bar; 21mm
• Manufacturer: VIKA

• Installatsiooni pool: Esisild
• Siseläbimõõt [mm]: 20
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Installatsiooni pool: Esisild
• Siseläbimõõt [mm]: 21
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle, inner
• Laagritüüp: Kummipuks
• Siseläbimõõt [mm]: 19
• Stabilisaatori läbimõõt [mm]: 21
• SVHC: SVHS aineid ei esine
• Name: Kinnitus,stabilisaator
• Manufacturer: FAG

• Quantity per packing unit: 5
• Installatsiooni pool: Esisild, kese
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Stabiliser Bar Diameter [mm]: 21.7
• Pikkus (mm): 48
• Laius (mm): 30
• Jämedus/Tugevus (mm): 40
• Siseläbimõõt [mm]: 22
• Välisläbimõõt [mm]: 48
• Materjal: Kumm
• Installatsiooni pool: Tagasild
• Kaal (kg): 0,034
• Name: Kinnitus,stabilisaator
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: esisild mõlemapoolselt
• Name: KINNITUS,STABILISAATORIPAIGUTUS
• Manufacturer: MAX

• for PR number: 0AE
• Installatsiooni pool: esisild vasakul, esisild paremal
• Siseläbimõõt [mm]: 21
• vajaminev tükihulk: 2
• Name: Paigutus - K„„ndmik VW P. GOLF 4 WEW 21MM LE/PR
• Manufacturer: MEY

• Fitting Position: Front Axle Left, Front Axle Right
• OE-numbri jaoks: 1J0 411 314 S
• Manufacturer: GSP AUTOMOTIVE

• for PR number: 0AE
• Installatsiooni pool: esisild vasakul, esisild paremal
• Siseläbimõõt [mm]: 23
• vajaminev tükihulk: 2
• Name: Paigutus - K„„ndmik VW P. GOLF 4 WEW
• Manufacturer: MEY

• for PR number: 0AL
• Installatsiooni pool: esisild vasakul, esisild paremal
• Siseläbimõõt [mm]: 19
• Hulgaühik: Tükk
• vajaminev tükihulk: 2
• Name: Paigutus - K„„ndmik VW P. GOLF 4 WEW 19MM
• Manufacturer: MEY

• Fitting Position: Left, Right, inner, outer
• for combined PR number: 0AE
• vajaminev tükihulk: 2
• Läbimõõt [mm]: 23
• Laagritüüp: Kummipuks
• Kaal (kg): 0,1
• pakendi pikkus [cm]: 11
• pakendi laius [cm]: 6
• pakendi kõrgus [cm]: 6
• Manufacturer: MONROE

• Installatsiooni pool: Tagasild, sees
• Laagritüüp: Kummipuks
• Stabilisaatori läbimõõt [mm]: 21,7
• Siseläbimõõt [mm]: 20,2
• Pikkus (mm): 30
• Laius (mm): 48
• Kõrgus (mm): 41
• OE-numbri jaoks: 1J0511423
• Manufacturer: SASIC

• Fitting Position: Front Axle both sides, outer
• Installatsiooni pool: esisild vasakul, esisild paremal
• Siseläbimõõt [mm]: 21
• Laagritüüp: Kummipuks
• Name: Stabilizer mount left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
VW GOLF 4/OCTAV/LEON
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
VW GOLF 4/OCTAV/LEON
(kvaliteediklass: PJ)"

• vana mudel:
• Siseläbimõõt [mm]: 21
• Materjal: Kumm, kumm koos koekihiga
• Installatsiooni pool: Esisild
• Kaal (kg): 0,06
• Hooldusinfot jälgida:
• Name: Paigutus - K„„ndmik VW P. GOLF 4 WEW
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Esisild
• Siseläbimõõt [mm]: 17
• Pikkus (mm): 25
• vajaminev tükihulk: 2
• Kõrgus (mm): 36
• Name: ALT 88928AL
• Manufacturer: ALTE AUTOMOTIVE

• Installatsiooni pool: Pealis
• Laagritüüp: Kummi-metalllaager
• Name: Stabilizer mount left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VW GOLF 4/OCTAV/LEON
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VW GOLF 4/OCTAV/LEON
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Siseläbimõõt [mm]: 21
• Netokaal [kg]: 0,05
• Name: Paigutus - K„„ndmik VW P. GOLF 4 WEW
• Manufacturer: NK

• Installatsiooni pool: Sillakeha
• Üldine informatsioon: Rubber bush for stabilizer bar
• Manufacturer: BORSEHUNG

• Stabiliser Bar Diameter [mm]: 21.7
• Quantity per packing unit: 2
• Installatsiooni pool: esisild vasakul, esisild paremal
• Laagritüüp: Kummipuks
• ainult paarina välja vahetada:
• Hulk telje kohta: 2
• Manufacturer: HANS PRIES

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: esisild vasakul, esisild paremal
• Laagritüüp: Kummipuks
• Siseläbimõõt [mm]: 21
• Stabilisaatori läbimõõt [mm]: 21
• Garantii: Garantii 3 aastat või kuni 75 000 km
• alternatiivne remondikomplekt: 52056548
• Manufacturer: METZGER

• Installatsiooni pool: esisild vasakul, esisild paremal
• Hulk telje kohta: 2
• Stabilisaatori läbimõõt [mm]: 23
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Name: Paigutus - K„„ndmik VW P. GOLF 4 WEW
• Manufacturer: LMI

• Kaal (kg): 0,04
• Installatsiooni pool: Tagasild, sees
• Stabilisaatori läbimõõt [mm]: 21,7
• vajaminev tükihulk: 2
• Manufacturer: TEDGUM

• Installatsiooni pool: ees
• Manufacturer: KAMOKA

• Installatsiooni pool: esisild mõlemapoolselt
• Siseläbimõõt [mm]: 21
• Välisläbimõõt [mm]: 39
• Pikkus (mm): 37
• Name: ALT 83245PAAL
• Manufacturer: ALTE AUTOMOTIVE

• Installatsiooni pool: esisild mõlemapoolselt
• Siseläbimõõt [mm]: 19
• Välisläbimõõt [mm]: 39
• Pikkus (mm): 37
• Name: ALT 83244PAAL
• Manufacturer: ALTE AUTOMOTIVE

• Installatsiooni pool: esisild vasakul, esisild paremal
• Hulk telje kohta: 2
• Ava läbimõõt [mm]: 21
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Name: Kinnitus,stabilisaator
• Manufacturer: LMI

• Fitting Position: Front Axle
• Laagritüüp: Kummipuks
• Siseläbimõõt [mm]: 17
• Stabilisaatori läbimõõt [mm]: 19
• SVHC: SVHS aineid ei esine
• Manufacturer: FAG
• Name: LU 819011810

• Installatsiooni pool: esisild mõlemapoolselt, all
• Laagritüüp: Kummipuks
• Siseläbimõõt [mm]: 21
• Pikkus (mm): 24,6
• Kaal (kg): 0,024
• Manufacturer: RTS

• Fitting Position: Front Axle both sides
• Required quantity: 2
• paaris tootenumbrid: VKDS 351004
• Kõrgus (mm): 37
• Siseläbimõõt [mm]: 19
• Manufacturer: SKF
• Name: SK VKDS351004

• Fitting Position: Front Axle
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Front, Left, Right
• Diameter [mm]: 23
• Quantity per packing unit: 2
• Siseläbimõõt 1 [mm]: 21
• Jämedus/Tugevus 1 (mm): 25
• Manufacturer: DELPHI
• Name: DE TD561W

• Stabiliser Bar Diameter [mm]: 18
• Pikkus (mm): 48
• Laius (mm): 30
• Jämedus/Tugevus (mm): 30
• Siseläbimõõt [mm]: 16,2
• Materjal: Kumm
• Installatsiooni pool: Tagasild
• Kaal (kg): 0,037
• Name: Kinnitus,stabilisaator
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle both sides
• Required quantity: 2
• Inner Diameter [mm]: 21
• paaris tootenumbrid: VKDS 351005
• Manufacturer: SKF
• Name: SK VKDS351005

• Fitting Position: Front Axle
• Quantity: 2
• Kaal (kg): 0,05
• vajaminev tükihulk: 2
• Installatsiooni pool: ees
• Üldine informatsioon: Rubber bush kit for stabilizer bar
• Manufacturer: VIKA

• Installatsiooni pool: esisild mõlemapoolselt
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Installatsiooni pool: esisild vasakul, esisild paremal
• Kaal (kg): 0,05
• Hooldusinfot jälgida:
• Name: KINNITUS,STABILISAATORIPAIGUTUS
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.