Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Shape: T Shape
(T Piece) -
Material: AEM
(Ethylene Acrylate Rubber) - Hose Type: Moulded Hose
- Number of inlets/outlets: 3
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Material: AEM
(Ethylene Acrylate Rubber) -
Name: VOOLIK,
KARTERITUULUTUS - Manufacturer: MAX
- for manufacturer number: 8703040
- Manufacturer: KAMOKA
- Name: PRZEWàD WENTYLACJI SKRZYNI KORBOWEJ VW 1.8T
- Manufacturer: VAI
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: AUM
- Number of Holes: 3
- Manufacturer: JP GROUP
- Lisainfo: Breather tube for cylinder head
- Additional information: Breather tube for cylinder head
- Consult accessories list for recommended additional repairs:
- Supplementary Article/Supplementary Info: with retaining spring
-
Supplementary Article/Info 2: with fastening clamp,
with seal ring - Material: Plastic
-
Name: VOOLIK,
KLAPIKAMBRIOHUTUS - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: inner
- Additionally required articles (article numbers): 476.020
- Alternative Repair Kit: 633.350
-
Name: Tihend,
klapikaan - Manufacturer: ELR
-
Hose Type: Moulded Hose,
Breather Hose -
Material: ECO
(Epichlorohydrin Rubber) - Number of inlets/outlets: 3
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: AUM
- Number of Holes: 2
-
Manufacturer: JP GROUP A/
S - Lisainfo: Breather tube for cylinder head
- Additional information: Breather tube for cylinder head
- Number of inlets/outlets: 3
-
Material: ECO
(Epichlorohydrin Rubber) -
Name: Voolik,
klapikambriohutus - Manufacturer: MAX
-
Engine Code: AGU,
AUM - Manufacturer: DELLO AUTOMEGA
- General Information: Connecting pipe for secondary air pump
- Manufacturer: VIKA
-
Engine Code: AGU,
AUM, ARZ - Block Separation:
-
Name: TIHEND,
KLAPIKAAN - Manufacturer: MAX
-
Lisainfo: 70-
0050 -
Additional information: 70-
0050
- Construction Year from: 09.2000
- Engine Code: AUM
- Manufacturer: FAI
- General Information: vent hose
- Manufacturer: VIKA
-
Material: ACM
(Polyacrylate) - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- for manufacturer number: 8703039
- Manufacturer: KAMOKA
- Material: Plastic
-
Name: VOOLIK,
KLAPIKAMBRIOHUTUS - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Manufacturer: JP GROUP A/
S - Lisainfo: Valve cover gasket set
- Additional information: Valve cover gasket set
-
Vehicle Identification Number (VIN) from: 1J-
3- 000001 -
Hose Type: Moulded Hose,
Breather Hose -
Material: ECO
(Epichlorohydrin Rubber) - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Construction Year to: 12.2000
- Manufacturer: BGA USZCZELKI
- for OE number: 06A 103 247
- Name: PRZEWàD WENTYLACJI SKRZYNI KORBOWEJ VW
- Manufacturer: VAI
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Engine Code: AGU,
AUM, ARZ - Manufacturer: CORTECO
- Name: COU 026143P
- Additional information: COU 026143P
- Lisainfo: COU 026143P
-
Name: USZCZELKA POK. ZAW. VW BORA 1.8 98-
- Manufacturer: DRM
- Weight [kg]: 0.138
-
Name: TIHENDIKOMPLEKT,
KLAPIKAAN - Manufacturer: FEB
- Additional information: FE23548
- Lisainfo: FE23548
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Manufacturer: FA1 FISCHER
- Fitting Position: outer
- Additionally required articles (article numbers): 476.030
- Alternative Repair Kit: 633.350
-
Name: Tihend,
klapikaan - Manufacturer: ELR
- Name: DRM 01302
- Manufacturer: DR.MOTOR AUTOMOTIVE
- General Information: Engine repair kit
- Manufacturer: VIKA
-
Material: ACM
(Polyacrylate) - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Engine Code: AGU,
AUM, ARZ - Block Separation:
-
Name: TIHENDIKOMPLEKT,
KLAPIKAAN - Manufacturer: REI
Manufacturer: ELRING
- Engine Code: AGU
- for OE number: 06A 103 213
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 06A 103 213 F
- Fitting Position: Crankcase
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Alternative Repair Kit: 56003300
- for OE number: 058103483F
-
Name: TIHEND,
KLAPIKAAN - Manufacturer: AJU
- Engine Code: AGU
- Transmission Type: Manual Transmission
- for OE number: 06A 103 221 BQ
-
Name: Voolik,
klapikambriohutus - Manufacturer: MAX
- General Information: Connecting pipe for secondary air pump
- Manufacturer: VIKA
- Material: Plastic
- General Information: PCV pipe kit
- Manufacturer: VIKA
- for OE number: 06A 103 221 BQ
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Engine Code: AGU,
ARZ, AUM - Block Separation:
- Construction Year to: 05.2003
- Weight [g]: 80.442
- Manufacturer: AJUSA
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks