Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
External Thread [mm]: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 510
- Oxygen Sensor: Planar Sensor
- Manufacturer: JP GROUP
- Lisainfo: Lambda sensor
- Additional information: Lambda sensor
-
External Thread [mm]: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 620
- Oxygen Sensor: Heated
- Manufacturer: JP GROUP
- Lisainfo: Lambda sensor
- Additional information: Lambda sensor
-
External Thread [mm]: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 480
- Oxygen Sensor: Planar Sensor
- Manufacturer: JP GROUP
- Lisainfo: Lambda sensor
- Additional information: Lambda sensor
-
Oxygen Sensor: Diagnostic Probe,
Thread pre- greased - Fitting Position: after catalytic converter
-
Fabrication Number: ESL-
AU- 007 - Manufacturer: NTY
-
Name: NTY ESL-
AU- 007
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Oxygen Sensor: Diagnostic Probe,
Thread pre- greased -
Fabrication Number: ESL-
SK- 000 - Manufacturer: NTY
-
Name: NTY ESL-
SK- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Oxygen Sensor: Regulating Sensor
- Number of circuits: 4
- Manufacturer: KAMOKA
-
Oxygen Sensor: Switching-
type Oxygen Sensor - Voltage [V]: 12
- Number of circuits: 4
- Weight [kg]: 0.09
- Resistor [Ohm]: 9
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: ENERGY
- Oxygen Sensor: Heated
- Manufacturer: JP GROUP
- Lisainfo: Lambda sensor
- Additional information: Lambda sensor
- Lambda andur: Bistabiilne andur
- Pinge [V]: 12
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 4
-
Kaal (kg): 0,
09 - Takistus [oom]: 9
- Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Name: CE 09SKV909
- Manufacturer: ESEN SKV
-
Oxygen Sensor: Diagnostic Probe,
Finger- type Sensor - Fitting Position: after catalytic converter
- Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Transmission Type: Manual Transmission
- Name: LAMBDA ANDUR
- Manufacturer: MAX
-
Oxygen Sensor: Regulating Sensor,
Thread pre- greased - Number of circuits: 5
- Fitting Position: before catalytic converter
-
Fabrication Number: ESL-
AU- 002 - Manufacturer: NTY
-
Name: NTY ESL-
AU- 002
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Front,
Right Front, after catalytic converter -
Oxygen Sensor: Diagnostic Probe,
Thread pre- greased -
Fabrication Number: ESL-
AU- 004 - Manufacturer: NTY
-
Name: NTY ESL-
AU- 004
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: Front
- Length [mm]: 940
- Number of connectors: 4
- Manufacturer: VERNET
- Construction Year from: 05.2002
- Lambda andur: Diagnoosisond
- Pinge [V]: 12
- Pikkus (mm): 760
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 4
-
Kaal (kg): 0,
15 - Takistus [oom]: 9
- Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Name: CE 09SKV694
- Manufacturer: ESEN SKV
- Engine Code: BEH
- Oxygen Sensor: Unheated
- Number of pins: 4
- Cable Length [mm]: 630
- Quality: OE EQUIVALENT
- for OE number: 06A906262AS
- Manufacturer: MEAT&DORIA
- Engine Code: BEH
- Oxygen Sensor: Diagnostic Probe
- Ülekandeliinide arv: 4
- Piirangutega toode/piirangu info 2: ilma pistikuta
- Name: LAMBDA ANDUR
- Manufacturer: NTK
- Oxygen Sensor: Heated
- Number of pins: 4
- Total Length [mm]: 780
- Manufacturer: ERA
-
Oxygen Sensor: Diagnostic Probe,
Planar Sensor, Heated - Cable Length [mm]: 700
- Name: LAMBDA ANDUR
- Manufacturer: DLP
- Quality class: PJ
Additional information: "Tootja: DELPHI
BORA (1J2), 10.98-09
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
BORA (1J2), 10.98-09
(kvaliteediklass: PJ)"
-
Oxygen Sensor: Diagnostic Probe,
Heated -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 580
- Weight [kg]: 0.097
- for OE number: 06A 906 262 AH
- Name: SW 33 10 3202
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Conductor Number: 4
- Resistor [Ohm]: 9
- Length [mm]: 721
- Number of circuits: 4
- Cable Length [mm]: 721
- Oxygen Sensor: Heated
- Name: LAMBDA ANDUR
- Manufacturer: MAG
- Construction Year from: 05.2002
- Lambda andur: Diagnoosisond
- Pinge [V]: 12
- Pikkus (mm): 650
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 4
-
Kaal (kg): 0,
15 - Takistus [oom]: 6
- Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV706
- Transmission Type: Manual Transmission
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Manufacturer Restriction: DENSO
- Quality: OE
- Weight [g]: 93
- Gross Weight [g]: 140
- Manufacturer: DENSO
-
Name: DN DOX-
0150 - Quality class: Q
Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
- Lambda andur: Bistabiilne andur
- Kaablipikkus (mm): 290
- valikuliselt:
- Ülekandeliinide arv: 4
- alternatiivne remondikomplekt: 570112
- Manufacturer: ERA
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Construction Year from: 05.2002
- Length [mm]: 550
- Technical Information Number: Universal 77015
- Manufacturer: FAE
- Engine Code: BEH
- Construction Year from: 05.2002
-
Oxygen Sensor: Regulating Sensor,
Heated - Fitting Position: before catalytic converter
- Number of circuits: 5
-
Length [mm]: 1,
500 - Name: LAMBDA ANDUR
- Manufacturer: MAX
- Engine Code: BEH
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Overall Length [mm]: 1,
800 - Number of pins: 4
-
Recommended change interval [km]: 160,
000 -
Oxygen Sensor: Thread pre-
greased - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Transmission Type: Manual Transmission
- Thread Size: M18x1.5
- Cable Length [mm]: 800
- Number of pins: 4
- Manufacturer Restriction: DENSO
- for OE number: 06C906265
- Quality: OE
- Weight [g]: 115
- Gross Weight [g]: 148
- Manufacturer: DENSO
-
Name: DN DOX-
2008 - Quality class: Q
Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor
Additional information: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)"
- Transmission Type: Manual Transmission
- Thread Size: M18x1.5
- Cable Length [mm]: 650
- Number of pins: 4
- Manufacturer Restriction: DENSO
- for OE number: 022906262BG
- Quality: OE
- Weight [g]: 189
- Gross Weight [g]: 222
- Manufacturer: DENSO
-
Name: DN DOX-
2000 - Quality class: Q
Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor
Additional information: "Tootja: DENSO
POLO SEDAN, 09.02-
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
POLO SEDAN, 09.02-
(kvaliteediklass: Q)"
- Oxygen Sensor: Regulating Sensor
- Fitting Position: before catalytic converter
-
Length [mm]: 1,
500 - Number of pins: 6
- for article number: 77030
- Manufacturer: FAE
- Fitting Position: before catalytic converter
- Rated Voltage [V]: 12
- Number of pins: 6
- Connector Shape: oval
-
Cable Length [mm]: 1,
510 -
Overall Length [mm]: 1,
538 - Spanner Size: 22
- Thread Size: M 18
- Thread Pitch [mm]: 1.5
- Supplementary Article/Supplementary Info: with cable tie
-
Supplementary Article/Info 2: with plastic socket,
with heat shield pipe - Lubrication: with grease lubrication
- Full Set:
- Manufacturer: TOPRAN
Oxygen Sensor: Regulating Sensor, Broadband Oxygen Sensor, Heated, Planar Sensor General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Construction Year from: 05.2002
- Transmission Type: Manual Transmission
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Length [mm]: 500
- Number of circuits: 4
- Manufacturer: VDO
-
Length [mm]: 1,
510 - Conductor Number: 5
- Number of circuits: 5
-
Cable Length [mm]: 1,
510 - Oxygen Sensor: Heated
- Name: LAMBDA ANDUR
- Manufacturer: MAG
- Lambda andur: Bistabiilne andur
- Pinge [V]: 12
- Värv: punane
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 5
-
Kaal (kg): 0,
15 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV905
- Fitting Position: before catalytic converter
- Cable Length [mm]: 950
- Name: LAMBDA ANDUR
- Manufacturer: DLP
Oxygen Sensor: Regulating Sensor, Switching-type Oxygen Sensor, Heated
- Oxygen Sensor: Diagnostic Probe
- Length [mm]: 465
- Number of connectors: 4
- Construction Year from: 05.2002
- Lambda andur: Bistabiilne andur
- Pinge [V]: 12
- Pikkus (mm): 1 470
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 5
-
Kaal (kg): 0,
22 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Name: CE 09SKV860
- Manufacturer: ESEN SKV
- Oxygen Sensor: Heated
- Conductor Number: 5
- General Information: Lambda sensor; 5 wire
- Manufacturer: VIKA
-
Oxygen Sensor: Switching-
type Oxygen Sensor - Guarantee: 3 years guarantee
- Weight [kg]: 0.15
- Always compare old and new part (in particular OE No.):
- Technical Information: Universal
- Name: CE 09SKV915
- Manufacturer: ESEN SKV
- Oxygen Sensor: Regulating Sensor
- Exhaust System: before catalytic converter
- Lambda andur: Bistabiilne andur
- Pinge [V]: 12
- Garantii: 3 aastat garantii
-
Kaal (kg): 0,
16 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Name: CE 09SKV907
- Manufacturer: ESEN SKV
- Construction Year from: 05.2002
- Lambda andur: Bistabiilne andur
- Pinge [V]: 12
- Pikkus (mm): 1 510
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 5
-
Kaal (kg): 0,
22 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV
- Construction Year from: 05.2002
- Number of pins: 5
- Connector Shape: D Shape
-
Cable Length [mm]: 1,
360 - Fitting Position: Exhaust Manifold
- Oxygen Sensor: Broadband Oxygen Sensor
- Quality: OE EQUIVALENT
- for OE number: 022906262H
- Manufacturer: MEAT & DORIA
- Fitting Position: before catalytic converter
- Oxygen Sensor: Regulating Sensor
-
Cable Length [mm]: 1,
500 - Number of pins: 6
- Exhaust System: before catalytic converter
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years. Name: SONDA LAMBDA VV GOLF IV, TRANSPORTER, PHAETON 1,4-6,0 97-
- Oxygen Sensor: Regulating Sensor
- Fitting Position: before catalytic converter
- Number of circuits: 5
- Overall Length [mm]: 760
-
Recommended change interval [km]: 160,
000 - Manufacturer: BOSCH
- Fitting Position: Front
-
Line insulation design: with silicone-
coated woven- fibre insulation - Conductor Number: 5
-
Thread Size: M18 x 1,
5 - Connector Shape: D Shape
-
Cable Length [mm]: 1,
510 - Supplementary Article/Supplementary Info: with cable tie
-
Oxygen Sensor: Broadband Oxygen Sensor,
Thread pre- greased - Number of circuits: 5
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks