Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
External Thread [mm]: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 510
- Oxygen Sensor: Planar Sensor
- Manufacturer: JP GROUP
- Lisainfo: Lambda sensor
- Additional information: Lambda sensor
-
External Thread [mm]: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 620
- Oxygen Sensor: Heated
- Manufacturer: JP GROUP
- Lisainfo: Lambda sensor
- Additional information: Lambda sensor
-
External Thread [mm]: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 480
- Oxygen Sensor: Planar Sensor
- Manufacturer: JP GROUP
- Lisainfo: Lambda sensor
- Additional information: Lambda sensor
- Number of pins: 3
- Supplementary Article/Info 2: with cable
- Sensor Type: Hall Sensor
-
Fabrication Number: ECP-
AU- 001 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitted Diameter [mm]: 20
- Number of pins: 4
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MAX
- Number of pins: 4
- Socket colour: black
- Connector Shape: D Shape
- Fitted Diameter [mm]: 20
- Diameter [mm]: 25.5
- for OE number: 078919501C
- Manufacturer: MEAT&DORIA
- Engine Code: BEH
- Colour: grey
-
for article number: 1.660.015K,
1.830.278K, 1.879.946 -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
-
Additional information: 1-
830- 278 -
Lisainfo: 1-
830- 278
- Engine Code: BEH
- Housing Colour: green
- Corresponds to the original part in colour: black
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
- Engine Code: BEH
- Housing Colour: green
- Corresponds to the original part in colour: black
- Manufacturer: FACET
- Engine Code: BEH
- Colour: grey
-
for article number: 26.0015K,
7.3278K, 7.7946 - Manufacturer: FACET
- Supplementary Article/Supplementary Info: with holder
- Number of pins: 3
- Sensor Type: Hall Sensor
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Supplementary Article/Info 2: without cable
- Socket colour: black
-
Fabrication Number: ESS-
VW- 000 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of pins: 4
- Connector Shape: D Shape
- Socket colour: green
- Fitted Diameter [mm]: 20
- Diameter [mm]: 25.5
- for OE number: 059919501A
- Manufacturer: MEAT & DORIA
- Number of pins: 4
- Housing Colour: green
- Connector Shape: round
- Fitted Diameter [mm]: 20
- Manufacturer: FAE
- for OE number: 06A 905 161 B
- Sensor Type: Active sensor
- Manufacturer: KAMOKA
- Construction Year from: 05.2002
- Voltage [V]: 12
- Supplementary Article/Supplementary Info: without cable pull
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.1
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 17SKV221
- Manufacturer: ESEN SKV
- General Information: Intake air temperature sensor
- Manufacturer: VIKA
- Length [mm]: 149
- Number of pins: 3
-
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: MAX
- Engine Code: BEH
- Colour: blue
- Corresponds to the original part in colour: blue
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
- Engine Code: BEH
- Colour: blue
- Corresponds to the original part in colour: blue
- Manufacturer: FACET
Manufacturer: DELLO AUTOMEGA
- Sensor Type: NTC Sensor
- Voltage [V]: 12
- Length [mm]: 20
- Colour Coding: grey
- Manufacturer: MAGNETI MARELLI
- Name: MM SPA111
- Number of connectors: 4
- Connector Shape: round
-
Supplementary Article/Supplementary Info: with gasket/
seal - for OE number: 059 919 501 A
- Colour Coding: green
- Spring Design: Retaining Spring
- Number of pins: 4
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity: 1
- Weight [kg]: 0.09
- Number of connectors: 3
- Required quantity: 1
- General Information: Camshaft position sensor
- Manufacturer: VIKA
- Sensor Type: Hall Sensor
- Number of connectors: 3
- Manufacturer: VERNET
- Additional information: CS0334 VERNET
- Lisainfo: CS0334 VERNET
- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Connector Shape: D Shape
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Number of pins: 2
- Connector Shape: rectangular
- Manufacturer: ERA
- Sensor Type: Hall Sensor
- Number of pins: 3
- Connector Shape: D Shape
- Supplementary Article/Info 2: with cable
- Supplementary Article/Supplementary Info: with holder
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
Manufacturer: MAGNETI MARELLI
- Number of pins: 2
- Connector Shape: D Shape
- Supplementary Article/Info 2: without cable
- for OE number: 1205185
- Manufacturer: MEAT&DORIA
- Engine Code: BEH
- Sensor Type: Hall Sensor
- Number of pins: 3
- Voltage [V]: 12
-
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: MAX
- Weight [kg]: 0.48
- Number of connectors: 2
- Colour: black
- General Information: Knock sensor
- Manufacturer: VIKA
- Colour: black
- Number of pins: 2
- Weight [kg]: 0.058
- Manufacturer: ERA
- Required quantity: 1
- Voltage [V]: 12
- Number of pins: 3
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: with cable
- Housing Colour: black
- Manufacturer: BRM
Name: CZUJNIK POO½ENIA WAKA ROZRZ. VW GOLF IV 1,6/2,0 97-
- for OE number: 058 919 501 A
- Number of pins: 4
- Fitted Diameter [mm]: 20
- Housing Colour: black
- Manufacturer: FAE
- Number of pins: 3
- Connector Shape: D Shape
- Sensor Type: Hall Sensor
- for OE number: 06A905161C
- Manufacturer: MEAT&DORIA
- Sensor Type: Hall Sensor
- Number of pins: 3
- Voltage [V]: 12
- Connector Shape: D Shape
- Supplementary Article/Info 2: with cable
- Weight [kg]: 0.14
-
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: VAL
- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Housing Colour: black
- Manufacturer: FAE ELEKTRYKA
- Number of pins: 3
-
Fabrication Number: EFP-
VW- 006 - Manufacturer: NTY
-
Name: NTY EFP-
VW- 006
- Engine Code: BEH
- Housing Colour: black
- Name: EP 1.957.144
- Manufacturer: EPS
- Engine Code: BEH
- Housing Colour: black
- Manufacturer: FACET
- Number of connectors: 4
- Diameter [mm]: 25
- Length [mm]: 50
-
Supplementary Article/Supplementary Info: with gasket/
seal - for OE number: 059 919 501
- Spring Design: Retaining Spring
- Number of pins: 4
- Connector Shape: angular
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Oxygen Sensor: Diagnostic Probe,
Thread pre- greased - Fitting Position: after catalytic converter
-
Fabrication Number: ESL-
AU- 007 - Manufacturer: NTY
-
Name: NTY ESL-
AU- 007
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of pins: 4
- Colour Coding: white
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Diameter [mm]: 26
- Number of pins: 2
- Supplementary Article/Info 2: with seal ring
- Spring Design: Retaining Spring
- Length [mm]: 20
- Housing Colour: blue
- Height [mm]: 57
- Colour: grey
- Number of connectors: 2
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Sensor Type: Hall Sensor
- Supplementary Article/Supplementary Info: with holder
- Number of pins: 3
-
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: MEY
- Construction Year from: 05.2002
-
Supplementary Article/Supplementary Info: with gasket/
seal - Number of pins: 4
- Mounting Type: Pressed
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
-
Engine Code: BEH,
AZG - Length [mm]: 180
- Number of pins: 3
-
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: DLP
Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"
- Alternatively:
- Number of pins: 3
- Weight [kg]: 0.095
- Alternative Repair Kit: 550235
- Manufacturer: ERA
- Number of pins: 2
- Colour: black
- Material: Plastic
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Oxygen Sensor: Diagnostic Probe,
Thread pre- greased -
Fabrication Number: ESL-
SK- 000 - Manufacturer: NTY
-
Name: NTY ESL-
SK- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Pinge [V]: 12
- Pistikkontaktide arv: 2
- Väändejõud [Nm]: 20
- Piirangutega toode/piirangu info 2: ilma kaablita
- Vastab originaalosa värvile: must
- Pistikute teostus: Lamepistik
- Pistikukatte kuju: ovaalne
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Name: HE 6PG013114301
- Manufacturer: HELLA
Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.
- Name: DETONATSIOONIANDUR
- Manufacturer: BOS
- Number of connectors: 2
- Colour: black
- Weight [kg]: 0.48
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of pins: 2
- Manufacturer: DELPHI
- Name: DE AS10169
- Engine Code: BEH
- Colour: black
- Temperature range [°C]: 120
- Fitting Depth [mm]: 20
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
- Engine Code: BEH
- Colour: black
- Fitting Depth [mm]: 20
- Manufacturer: FACET
- Voltage [V]: 12
- Number of pins: 5
-
Fabrication Number: EPP-
AU- 014 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Length [mm]: 149
- Number of connectors: 3
- Supplementary Article/Supplementary Info: with holder
- Weight [kg]: 0.09
- Observe dimensions:
- Supplementary Article/Info 2: with cable
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Oxygen Sensor: Regulating Sensor
- Number of circuits: 4
- Manufacturer: KAMOKA
-
Fabrication Number: EPP-
AU- 026 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Length [mm]: 149
- Number of connectors: 3
- Supplementary Article/Supplementary Info: with holder
- Weight [kg]: 0.09
- Supplementary Article/Info 2: with cable
- Observe dimensions:
- Name: SW 30 93 7027
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Voltage [V]: 12
-
Fabrication Number: EPP-
AU- 035 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: BEH
- Fitting Position: both sides
- Number of pins: 2
- Colour: black
- Name: Detonatsiooniandur
- Manufacturer: VDO
- Fitting Position: before catalytic converter
- Observe technical data:
- Manufacturer Restriction: VAG
- Number of pins: 6
- Cable Length [mm]: 250
- Cable Cross Section [mm²]: 1
- Socket Width [mm]: 2.8
-
Contact surface: Tin-
plated -
Supplementary Article/Supplementary Info: with socket housing,
with gaskets/ seals - Supplementary Article/Info 2: with pipe
- Cable insulation material: Silicone
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- Plug housing design: Plug sleeve housing
- SVHC: No SVHC present!
-
Name: Kaabli remondikomplekt,
tagatuli - Manufacturer: HBE
-
Oxygen Sensor: Switching-
type Oxygen Sensor - Voltage [V]: 12
- Number of circuits: 4
- Weight [kg]: 0.09
- Resistor [Ohm]: 9
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: ENERGY
- Voltage [V]: 12
- Number of pins: 5
- Housing Type: with housing
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
Manufacturer: DELLO AUTOMEGA
- Oxygen Sensor: Heated
- Manufacturer: JP GROUP
- Lisainfo: Lambda sensor
- Additional information: Lambda sensor
- Manufacturer Restriction: Bosch
- Voltage [V]: 12
- Housing Type: with housing
- Number of pins: 5
- Guarantee: 3 years guarantee
- New Part:
- Used part return not required:
- Weight [kg]: 0.3
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV ESEN
- Quality class: PJ
- Name: Air flow sensor
- Voltage [V]: 12
- Sensor Type: Hall Sensor
- Number of pins: 3
-
Supplementary Article/Info 2: with clip,
Holder may need adaptation - Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- for OE number: 06A 906 461 G
- Manufacturer: KAMOKA
- General Information: Fuel pressure sensor
- Manufacturer: VIKA
- Lambda andur: Bistabiilne andur
- Pinge [V]: 12
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 4
-
Kaal (kg): 0,
09 - Takistus [oom]: 9
- Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Name: CE 09SKV909
- Manufacturer: ESEN SKV
- Number of pins: 3
-
Supplementary Article/Info 2: without cable,
High Pressure Side - Spanner Size: 24
- Housing Colour: black
- Connector Shape: D Shape
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fuel Type: CNG
- Manufacturer: NRF KLIMATYZACJA
- for OE number: 6Q1 721 503 C
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Number of pins: 6
- Connector Shape: rectangular
-
Fabrication Number: EAP-
AU- 000 - Manufacturer: NTY
-
Name: NTY EAP-
AU- 000
- Voltage [V]: 12
- Housing Type: with housing
- Number of pins: 5
- Guarantee: 3 years guarantee
- New Part:
- Used part return not required:
- Weight [kg]: 0.3
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 07SKV054
- Engine Code: BEH
- Voltage [V]: 12
- Name: Ohumassimootja
- Manufacturer: MAX
Manufacturer: METZGER
-
Oxygen Sensor: Diagnostic Probe,
Finger- type Sensor - Fitting Position: after catalytic converter
- Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Transmission Type: Manual Transmission
- Name: LAMBDA ANDUR
- Manufacturer: MAX
- Voltage [V]: 12
- Number of pins: 2
- Tightening Torque [Nm]: 20
- Supplementary Article/Info 2: without cable
- Corresponds to the original part in colour: black
- Plug Type: Blade Terminal
- Connector Shape: oval
- Quantity: 1
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PG009108561
- Manufacturer: HELLA
SVHC: 1317-36-8; Lead monoxide (lead oxide), 12060-00-3; Lead titanium trioxide, 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Construction Year from: 05.2002
- Number of pins: 5
- Housing Type: with housing
- Manufacturer: JP GROUP
- Lisainfo: Air meter
- Additional information: Air meter
- Fitting Position: Fuel Line
- Supplementary Article/Info 2: Low Pressure Side
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.05
- Shape: straight
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV624
-
Oxygen Sensor: Regulating Sensor,
Thread pre- greased - Number of circuits: 5
- Fitting Position: before catalytic converter
-
Fabrication Number: ESL-
AU- 002 - Manufacturer: NTY
-
Name: NTY ESL-
AU- 002
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of pins: 5
- Voltage [V]: 12
- Name: OHUMASSIMOOTJA
- Manufacturer: MAX
-
Lisainfo: ELS51-
0077 -
Additional information: ELS51-
0077
- Number of pins: 5
- Manufacturer: DENCKERMANN FILTRY
- Number of connectors: 3
- Weight [kg]: 0.04
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: BEH
- Manufacturer: FACET
-
Fitting Position: Front,
Right Front, after catalytic converter -
Oxygen Sensor: Diagnostic Probe,
Thread pre- greased -
Fabrication Number: ESL-
AU- 004 - Manufacturer: NTY
-
Name: NTY ESL-
AU- 004
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: Front
- Length [mm]: 940
- Number of connectors: 4
- Manufacturer: VERNET
- Pinge [V]: 12
- Pistikkontaktide arv: 5
- Garantii: 3 aastat garantii
- Uus osa:
- Vana detaili tagastus mittevajalik:
-
Kaal (kg): 0,
07 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
- Name: CE 07SKV504
- Engine Code: BEH
- Pinge [V]: 12
- Korpusetüüp: koos korpusega
- Pistikkontaktide arv: 5
- Garantii: 3 aastat garantii
- Uus osa:
- Vana detaili tagastus mittevajalik:
-
Kaal (kg): 0,
28 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV
- Engine Code: BEH
- Fitting Position: from rail to injector
- Number of pins: 3
- Connector Shape: D Shape
- Socket colour: black
-
Fuel Type: Petrol,
Petrol/ Gas (Bifuel) - Supplementary Article/Info 2: High Pressure Side
- Thread Size: M10
- Spanner Size: 24 mm
- for OE number: 03C906051A
- Manufacturer: MEAT&DORIA
- Housing Type: with housing
- Number of pins: 5
- Housing material: Plastic
- Connector Shape: D Shape
- Number of mounting bores: 2
- Supplementary Article/Info 2: with integrated grille
- Recommended additional repairs: Air Filter
- New Part:
- Used part return not required:
- Consult accessories list for recommended additional repairs:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Construction Year from: 05.2002
- Lambda andur: Diagnoosisond
- Pinge [V]: 12
- Pikkus (mm): 760
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 4
-
Kaal (kg): 0,
15 - Takistus [oom]: 9
- Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Name: CE 09SKV694
- Manufacturer: ESEN SKV
- Engine Code: BEH
- Oxygen Sensor: Unheated
- Number of pins: 4
- Cable Length [mm]: 630
- Quality: OE EQUIVALENT
- for OE number: 06A906262AS
- Manufacturer: MEAT&DORIA
- Engine Code: BEH
- Oxygen Sensor: Diagnostic Probe
- Ülekandeliinide arv: 4
- Piirangutega toode/piirangu info 2: ilma pistikuta
- Name: LAMBDA ANDUR
- Manufacturer: NTK
- Oxygen Sensor: Heated
- Number of pins: 4
- Total Length [mm]: 780
- Manufacturer: ERA
-
Oxygen Sensor: Diagnostic Probe,
Planar Sensor, Heated - Cable Length [mm]: 700
- Name: LAMBDA ANDUR
- Manufacturer: DLP
- Quality class: PJ
Additional information: "Tootja: DELPHI
BORA (1J2), 10.98-09
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
BORA (1J2), 10.98-09
(kvaliteediklass: PJ)"
-
Oxygen Sensor: Diagnostic Probe,
Heated -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 580
- Weight [kg]: 0.097
- for OE number: 06A 906 262 AH
- Name: SW 33 10 3202
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Conductor Number: 4
- Resistor [Ohm]: 9
- Length [mm]: 721
- Number of circuits: 4
- Cable Length [mm]: 721
- Oxygen Sensor: Heated
- Name: LAMBDA ANDUR
- Manufacturer: MAG
- Construction Year from: 05.2002
- Lambda andur: Diagnoosisond
- Pinge [V]: 12
- Pikkus (mm): 650
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 4
-
Kaal (kg): 0,
15 - Takistus [oom]: 6
- Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV706
- Transmission Type: Manual Transmission
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Manufacturer Restriction: DENSO
- Quality: OE
- Weight [g]: 93
- Gross Weight [g]: 140
- Manufacturer: DENSO
-
Name: DN DOX-
0150 - Quality class: Q
Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
-
Fabrication Number: EAP-
AU- 001 - Manufacturer: NTY
-
Name: NTY EAP-
AU- 001
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Lambda andur: Bistabiilne andur
- Kaablipikkus (mm): 290
- valikuliselt:
- Ülekandeliinide arv: 4
- alternatiivne remondikomplekt: 570112
- Manufacturer: ERA
- Number of pins: 3
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Construction Year from: 05.2002
- Length [mm]: 550
- Technical Information Number: Universal 77015
- Manufacturer: FAE
- Guarantee: 5 years guarantee
- Name: OHUMASSIMOOTJA
- Manufacturer: HUC
- Engine Code: BEH
- Construction Year from: 05.2002
-
Oxygen Sensor: Regulating Sensor,
Heated - Fitting Position: before catalytic converter
- Number of circuits: 5
-
Length [mm]: 1,
500 - Name: LAMBDA ANDUR
- Manufacturer: MAX
- Engine Code: BEH
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Overall Length [mm]: 1,
800 - Number of pins: 4
-
Recommended change interval [km]: 160,
000 -
Oxygen Sensor: Thread pre-
greased - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Transmission Type: Manual Transmission
- Thread Size: M18x1.5
- Cable Length [mm]: 800
- Number of pins: 4
- Manufacturer Restriction: DENSO
- for OE number: 06C906265
- Quality: OE
- Weight [g]: 115
- Gross Weight [g]: 148
- Manufacturer: DENSO
-
Name: DN DOX-
2008 - Quality class: Q
Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor
Additional information: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)"
- Construction Year from: 05.2002
-
Transmission Type: 5-
Speed Manual Transmission, Manual Transmission - Number of mounting bores: 3
- Number of pins: 6
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Assy./disassy. by qualified personnel required!:
-
Name: ANDUR,
SOIDUPEDAALIASEND - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Transmission Type: Manual Transmission
- Thread Size: M18x1.5
- Cable Length [mm]: 650
- Number of pins: 4
- Manufacturer Restriction: DENSO
- for OE number: 022906262BG
- Quality: OE
- Weight [g]: 189
- Gross Weight [g]: 222
- Manufacturer: DENSO
-
Name: DN DOX-
2000 - Quality class: Q
Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor
Additional information: "Tootja: DENSO
POLO SEDAN, 09.02-
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
POLO SEDAN, 09.02-
(kvaliteediklass: Q)"
- Fitting Position: Fuel Line
- Supplementary Article/Info 2: Low Pressure Side
- Number of pins: 3
- Shape: straight
- Manufacturer: METZGER
- Oxygen Sensor: Regulating Sensor
- Fitting Position: before catalytic converter
-
Length [mm]: 1,
500 - Number of pins: 6
- for article number: 77030
- Manufacturer: FAE
- Construction Year from: 05.2002
- Guarantee: 5 years guarantee
- Manufacturer: HUCO
- Operating Mode: Electric
- Manufacturer: MAGNETI MARELLI
- Required quantity: 1
- Voltage [V]: 12
- Number of pins: 5
- Manufacturer: BREMI
- Fitting Position: before catalytic converter
- Rated Voltage [V]: 12
- Number of pins: 6
- Connector Shape: oval
-
Cable Length [mm]: 1,
510 -
Overall Length [mm]: 1,
538 - Spanner Size: 22
- Thread Size: M 18
- Thread Pitch [mm]: 1.5
- Supplementary Article/Supplementary Info: with cable tie
-
Supplementary Article/Info 2: with plastic socket,
with heat shield pipe - Lubrication: with grease lubrication
- Full Set:
- Manufacturer: TOPRAN
Oxygen Sensor: Regulating Sensor, Broadband Oxygen Sensor, Heated, Planar Sensor General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: BEH
- Operating Mode: Electric
- Voltage [V]: 12
- Housing Type: without housing
- Name: OHUMASSIMOOTJA
- Manufacturer: PIE
-
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: BOS
- Construction Year from: 05.2002
- Transmission Type: Manual Transmission
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Length [mm]: 500
- Number of circuits: 4
- Manufacturer: VDO
-
Length [mm]: 1,
510 - Conductor Number: 5
- Number of circuits: 5
-
Cable Length [mm]: 1,
510 - Oxygen Sensor: Heated
- Name: LAMBDA ANDUR
- Manufacturer: MAG
- Quantity: 1
- General Information: camshaft position sensor
- Manufacturer: BORSEHUNG
- Lambda andur: Bistabiilne andur
- Pinge [V]: 12
- Värv: punane
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 5
-
Kaal (kg): 0,
15 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV905
- Construction Year from: 05.2002
- Number of pins: 5
- Connector Shape: D Shape
-
Cable Length [mm]: 1,
360 - Fitting Position: Exhaust Manifold
- Oxygen Sensor: Broadband Oxygen Sensor
- Quality: OE EQUIVALENT
- for OE number: 022906262H
- Manufacturer: MEAT&DORIA
- Fitting Position: before catalytic converter
- Cable Length [mm]: 950
- Name: LAMBDA ANDUR
- Manufacturer: DLP
Oxygen Sensor: Regulating Sensor, Switching-type Oxygen Sensor, Heated
- Housing Type: with housing
- Number of pins: 5
- Plug Type: Male
- Housing Colour: black
- Voltage [V]: 12
- Recommended additional repairs: Air Filter
- Manufacturer: DELPHI
- Oxygen Sensor: Diagnostic Probe
- Length [mm]: 465
- Number of connectors: 4
- Transmission Type: Manual Transmission
- Number of pins: 6
- Colour: black
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Manufacturer: METZGER
Vehicle Identification Number (VIN) from: 1J-XB044 158, 1J-XD091 224, 1J-XP072 545, 1J-XW180 710 Vehicle Equipment: for vehicles with electronic accelerator pedal (DbW)
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Transmission Type: Automatic Transmission
- Manufacturer: BOSCH
- Construction Year from: 05.2002
- Lambda andur: Bistabiilne andur
- Pinge [V]: 12
- Pikkus (mm): 1 470
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 5
-
Kaal (kg): 0,
22 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Name: CE 09SKV860
- Manufacturer: ESEN SKV
- Oxygen Sensor: Heated
- Conductor Number: 5
- General Information: Lambda sensor; 5 wire
- Manufacturer: VIKA
-
Oxygen Sensor: Switching-
type Oxygen Sensor - Guarantee: 3 years guarantee
- Weight [kg]: 0.15
- Always compare old and new part (in particular OE No.):
- Technical Information: Universal
- Name: CE 09SKV915
- Manufacturer: ESEN SKV
- Oxygen Sensor: Regulating Sensor
- Exhaust System: before catalytic converter
- Lambda andur: Bistabiilne andur
- Pinge [V]: 12
- Garantii: 3 aastat garantii
-
Kaal (kg): 0,
16 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Name: CE 09SKV907
- Manufacturer: ESEN SKV
- Construction Year from: 05.2002
- Lambda andur: Bistabiilne andur
- Pinge [V]: 12
- Pikkus (mm): 1 510
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 5
-
Kaal (kg): 0,
22 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV
- Fitting Position: before catalytic converter
- Oxygen Sensor: Regulating Sensor
-
Cable Length [mm]: 1,
500 - Number of pins: 6
- Exhaust System: before catalytic converter
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years. Name: SONDA LAMBDA VV GOLF IV, TRANSPORTER, PHAETON 1,4-6,0 97-
- Oxygen Sensor: Regulating Sensor
- Fitting Position: before catalytic converter
- Number of circuits: 5
- Overall Length [mm]: 760
-
Recommended change interval [km]: 160,
000 - Manufacturer: BOSCH
- Recommended additional repairs: Air Filter
- Name: OHUMASSIMOOTJA
- Manufacturer: BOS
- Number of pins: 5
- Supplementary Article/Info 2: with integrated air temperature sensor
- Connector Shape: D Shape
-
Sensor Type: Hot-
film Sensor - Voltage [V]: 12
- Length [mm]: 108
- Width [mm]: 125
- Height [mm]: 108
- Weight [kg]: 0.25
- Name: OHUMASSIMOOTJA
- Manufacturer: VAL
- Fitting Position: Front
-
Line insulation design: with silicone-
coated woven- fibre insulation - Conductor Number: 5
-
Thread Size: M18 x 1,
5 - Connector Shape: D Shape
-
Cable Length [mm]: 1,
510 - Supplementary Article/Supplementary Info: with cable tie
-
Oxygen Sensor: Broadband Oxygen Sensor,
Thread pre- greased - Number of circuits: 5
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks