Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Switch pressure from [bar]: 0.55
- Switch pressure to [bar]: 0.85
- Colour Coding: brown
- Number of connectors: 1
- External Thread [mm]: M10x1
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Colour Coding: grey
- Number of pins: 2
- Manufacturer: JP GROUP
-
Lisainfo: Sender for water temperature gauge,
2 pins -
Additional information: Sender for water temperature gauge,
2 pins
-
Vehicle Identification Number (VIN) from: 1J-
X- 250001 - Number of pins: 4
- Colour Coding: green
- Manufacturer: JP GROUP
- Lisainfo: Sender for water temperature gauge 4 pins
- Additional information: Sender for water temperature gauge 4 pins
- Operating voltage [V]: 12
- Sensor Type: NTC Sensor
- Switch Point [°C]: 150
- Diameter [mm]: 20
- Number of pins: 4
-
Manufacturer: JP GROUP A/
S -
Lisainfo: Temperature sensor for cooling system,
4 pins -
Additional information: Temperature sensor for cooling system,
4 pins
- Thread Size: M10x1
- Colour: brown
- Number of pins: 1
- Manufacturer: DELLO AUTOMEGA
- Engine Code: ASZ
- Pressure [bar]: 1
- Spanner Size: 24
- Number of pins: 1
- Manufacturer: KAVO
- Model Year to: 2001
-
Vehicle Identification Number (VIN) from: 1J-
W- 000 001 - Vehicle Equipment: for vehicles with air conditioning
- Number of pins: 2
- Switch Point [°C]: 119
- Manufacturer: JP GROUP
- Lisainfo: Thermo switch for air condition 119 C
- Additional information: Thermo switch for air condition 119 C
- Quantity: 1
- Switch point from [bar]: 0.55
- Switch point to [bar]: 0.85
- Weight [kg]: 0.031
- Required quantity: 1
- External Thread [mm]: M10 x 1
- Number of connectors: 1
- Spanner Size: 22
- Supplementary Article/Info 2: with seal ring
- Colour Coding: brown
- General Information: Oil pressure sensor
- Manufacturer: VIKA
- Quantity: 1
- Switch point from [bar]: 0.55
- Switch point to [bar]: 0.85
- Weight [kg]: 0.031
- Required quantity: 1
- External Thread [mm]: M10 x 1
- Number of connectors: 1
- Spanner Size: 22
- Supplementary Article/Info 2: with seal ring
- Colour Coding: brown
- General Information: Oil pressure sensor
- Manufacturer: VIKA
- Connector Shape: D Shape
- Operating Mode: Hydraulic
- Colour Coding: brown
- Thread Size: M 10
- Thread Pitch [mm]: 1
- Number of pins: 1
-
Control Range [bar]: 0,
55 - 0, 85 - Supplementary Article/Info 2: with seal ring
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: ASZ
- Colour: brown
- Thread Size: M10x1
- Spanner Size: 24
-
Supplementary Article/Supplementary Info: with gasket/
seal - Name: OLISURVELLITUS
- Manufacturer: MAX
-
Fabrication Number: ECC-
AU- 004 - Socket colour: brown
- Number of pins: 1
- Supplementary Article/Info 2: with seal ring
- Manufacturer: NTY
-
Name: NTY ECC-
AU- 004
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- for OE number: 59919501
- Temperature range to [°C]: 150
- Manufacturer: KAMOKA
- for OE number: 1100619
- Manufacturer: KAMOKA
- for OE number: 191 919 369 A S1
- Housing Colour: white
- Manufacturer: KAMOKA
- Quantity: 1
- General Information: Exterior temperature sensor
- Manufacturer: VIKA
- Weight [kg]: 0.2
- Number of connectors: 4
- Outer Diameter [mm]: 20
- Plug Type ID: 4
- Colour: blue
- Supplementary Article/Info 2: with seal ring
- Required quantity: 1
- General Information: Coolant temperature sensor; blue; 4 pins
- Manufacturer: VIKA
-
Fabrication Number: ECT-
AU- 008 - Number of pins: 4
- Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Quantity: 1
- Weight [kg]: 0.02
- Number of connectors: 4
- Outer Diameter [mm]: 20
- Plug Type ID: 4
- Colour: green
- Required quantity: 1
- General Information: Coolant temperature sensor; green; 4 pins
- Manufacturer: VIKA
-
Fabrication Number: ECT-
AU- 004 - Number of pins: 4
- Colour Coding: green
- Connector Shape: oval
- Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Operating Mode: Manual
- Switch Point [°C]: 10
- Number of pins: 2
- Vehicle Equipment: for vehicles with air conditioning
-
Lisainfo: Thermo switch for air condition 10/
1.7 C -
Additional information: Thermo switch for air condition 10/
1.7 C
-
Fabrication Number: ECT-
AU- 005 - Number of pins: 2
- Supplementary Article/Info 2: with seal ring
- Sensor Type: NTC Sensor
- Socket colour: black
- Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Thread Size: M10x1
- Spanner Size: 22
- Colour Coding: brown
- Number of pins: 1
- Pressure from [bar]: 0.55
- Pressure to [bar]: 0.85
- Name: OLISURVELLITUS
- Manufacturer: MAX
-
Lisainfo: 21-
0359 -
Additional information: 21-
0359
- Pressure [bar]: 8.5
-
Housing Colour: dark-
brown - Thread Size: M10x1.0
- Diameter [mm]: 24
- Spanner Size: 24
- Number of pins: 1
- Name: OLISURVELLITUS
- Manufacturer: DLP
- Quality class: PJ
Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"
- Engine Code: ASZ
- Colour: brown
- Pressure to [bar]: 0.85
- Pressure from [bar]: 0.55
- Pressure [bar]: 0.7
- Thread Size: M10x1
- Spanner Size: 24
- Name: OLISURVELLITUS
- Manufacturer: EPS
- Engine Code: ASZ
- Number of connectors: 4
- Manufacturer: 3RG
- Engine Code: ASZ
- Colour: brown
- Pressure to [bar]: 0.85
- Pressure from [bar]: 0.55
- Pressure [bar]: 0.7
- Thread Size: M10x1
- Spanner Size: 24
- Manufacturer: FACET
- Switch Pressure [bar]: 0.7
- Thread Size: M10x1.0
-
Sensor Type: Open-
style sensor - Manufacturer: VERNET
-
Vehicle Identification Number (VIN) to: 1J-
X- 250000 - Colour Coding: green
- Connector Shape: rectangular
- Sensor Type: NTC Sensor
- Number of pins: 4
- for OE number: 059 919 501
-
Supplementary Article/Info 2: with clip,
with seal ring - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Vehicle Identification Number (VIN) from: 1J-
X- 350001 - Number of pins: 4
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MAX
-
Vehicle Identification Number (VIN) to: 1J-
X- 350001 - Temperature range to [°C]: 150
- Colour: green
- Number of pins: 4
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MAX
- Thread Size: M 10x1
- Housing Colour: brown
- Pressure [bar]: 0.7
- Manufacturer: FAE
-
Vehicle Identification Number (VIN) from: 1J-
4- 000 001, 1J- 6- 000 001 - Number of pins: 4
- Colour: green
- Manufacturer: DELLO AUTOMEGA
- Vehicle Equipment: for vehicles with air conditioning
- Colour: white
- Number of pins: 2
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MAX
- Number of pins: 3
- Supplementary Article/Info 2: with clip
- Guarantee: 3 years guarantee
- Weight [kg]: 0.1
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV550
- Sensor Type: NTC Sensor
- Mounting Type: Clamped
- Connector Shape: rectangular
- Number of pins: 4
- Socket colour: black
- for OE number: 059919501
- Supplementary Article/Info 2: with mounting parts
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
- Sensor Type: NTC Sensor
- Mounting Type: Clamped
- Connector Shape: D Shape
- Number of pins: 2
- for OE number: 06A919501
- Supplementary Article/Info 2: with mounting parts
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
- Pressure from [bar]: 0.55
- Pressure to [bar]: 0.85
- Combi Switch Function: Normally Open Contact
- Colour: brown
- Spanner Size: 24
-
Thread Size: M10 x 1,
0 - Number of pins: 1
- Name: OLISURVELLITUS
- Manufacturer: MEY
- Switch point from [bar]: 0.55
- Switch point to [bar]: 0.85
- External Thread Size: M10 x 1
- Spanner Size: 22
- Number of connectors: 1
- Colour Coding: brown
- Weight [kg]: 0.031
- Supplementary Article/Info 2: with seal ring
- Name: OLISURVELLITUS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Alternatively:
- Housing Colour: black
- Number of pins: 4
- Spanner Size: 0
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: DLP
- Number of connectors: 4
- Connector Shape: angular
- Thread Size: 20 mm
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: VER
- Additional information: WS2605 VERNET
- Lisainfo: WS2605 VERNET
- Engine Code: ASZ
- Housing Colour: black
- Number of pins: 4
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: DLP
- Pressure [bar]: 0.7
- Thread Size: M10 x 1
- Number of pins: 1
- Technical Information Number: circuit N.O.
- Manufacturer: ERA
- Sensor Type: NTC Sensor
- Mounting Type: Clamped
- Connector Shape: D Shape
- Number of pins: 4
- for OE number: 059919501A
- Supplementary Article/Info 2: with mounting parts
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
- Connector Shape: D Shape
- Material: Plastic
- Number of pins: 4
- Plug Type: Female
- Sensor Type: NTC Sensor
- Spanner Size: 0
- Thread Size: 0
- Manufacturer: NISSENS
- Name: NI 207009
Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.
- Sensor Type: NTC Sensor
- Supplementary Article/Info 2: without seal ring
- Colour: green
- Number of pins: 4
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MEY
- Construction Year from: 05.2002
- Number of pins: 2
- Sensor Type: NTC Sensor
- Connector Shape: D Shape
- Colour: black
- for OE number: 06B905379D
- Manufacturer: DELLO AUTOMEGA
-
Vehicle Identification Number (VIN) from: 1J-
X- 250001 - Colour Coding: green
- Connector Shape: oval
- Sensor Type: NTC Sensor
- Number of pins: 4
-
for OE number: 059 919 501A,
1 124 770 - Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Switch point from [bar]: 0.55
- Switch point to [bar]: 0.85
- External Thread Size: M10 x 1
- Spanner Size: 22
- Number of connectors: 1
- Colour Coding: brown
- Weight [kg]: 0.031
- Supplementary Article/Info 2: with seal ring
- Name: SW 30 91 9018
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of pins: 4
-
Supplementary Article/Supplementary Info: with gasket/
seal - Supplementary Article/Info 2: with clamp holder
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Thread Size: 20 mm
- Number of pins: 2
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: VER
- Additional information: WS2607
- Lisainfo: WS2607
- Number of connectors: 4
- Connector Shape: round
- Thread Size: 20 mm
- Number of pins: 4
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: VER
- Quantity: 1
-
Control Range [bar]: 0.55/
0.85BAR - Colour: brown
-
General Information: Oil pressure sensor; 1 pin; brown; 0.55-
0.85 BAR - Manufacturer: BORSEHUNG
- Number of pins: 2
- Temperature range to [°C]: 120
- Manufacturer: ERA
- Vehicle Identification Number (VIN) to: ******1J*X*350001
- Temperature range to [°C]: 150
- Outer Diameter [mm]: 20
- Number of connectors: 4
- Weight [kg]: 0.2
-
Supplementary Article/Supplementary Info: with retaining spring,
with gasket/ seal -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Housing Colour: dark green
- Number of pins: 4
- Spanner Size: 0
- Manufacturer: DELPHI
- Name: DE TS10279
- Vehicle Identification Number (VIN) from: ******1J*X*350001
- Number of connectors: 4
- Weight [kg]: 0.038
-
Supplementary Article/Supplementary Info: with retaining spring,
with gasket/ seal -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: FEB
- Additional information: FE32510
- Lisainfo: FE32510
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Tightening torque from [Nm]: 20
- Voltage [V]: 12
- Combi Switch Function: Normally Open Contact
- Current Strength [A]: 0.15
- Tolerance [%]: 15
- Thread Size: M10x1
- Spanner Size: 24
- Pressure from [bar]: 0.555
- Pressure to [bar]: 0.85
- Number of pins: 1
- Corresponds to the original part in colour: brown
- Assy./disassy. by qualified personnel required!:
- Name: HE 6ZL008280031
- Manufacturer: HELLA
- Construction Year to: 12.2001
-
Vehicle Identification Number (VIN) to: 1J-
X- 250 000 - Sensor Type: NTC Sensor
- Supplementary Article/Info 2: with seal ring
- Number of pins: 4
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MEY
- Engine Code: ASZ
- Housing Colour: green
- Corresponds to the original part in colour: black
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
- Engine Code: ASZ
- Colour: grey
-
for article number: 1.660.015K,
1.830.278K, 1.879.946 -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
-
Additional information: 1-
830- 278 -
Lisainfo: 1-
830- 278
- Engine Code: ASZ
- Colour: grey
-
for article number: 26.0015K,
7.3278K, 7.7946 - Manufacturer: FACET
- Engine Code: ASZ
- Housing Colour: green
- Corresponds to the original part in colour: black
- Manufacturer: FACET
- for OE number: 078 919 501 C
- Manufacturer: TRUCKTEC
- Thread Size: M20
- Number of pins: 2
- Housing Colour: grey
- Connector Shape: oval
- Manufacturer: ERA
- Vehicle Identification Number (VIN) to: ******1J*X*350001
- Temperature range to [°C]: 150
- Outer Diameter [mm]: 20
- Number of connectors: 4
- Colour: green
- Weight [kg]: 0.2
-
Supplementary Article/Supplementary Info: with gasket/
seal, with retaining spring - Name: SW 30 93 1539
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Vehicle Identification Number (VIN) from: ******1J*X*350001
- Number of connectors: 4
- Weight [kg]: 0.038
-
Supplementary Article/Supplementary Info: with retaining spring,
with gasket/ seal - Name: SW 30 93 2510
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Required quantity: 1
- Number of pins: 4
- Supplementary Article/Info 2: with seal ring
- Colour: green
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Voltage [V]: 12
- Number of pins: 4
- Guarantee: 3 years guarantee
- Weight [kg]: 0.02
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV345
- Vehicle Equipment: for vehicles with power steering
- Construction Year to: 04.2001
- Connector Shape: D Shape
- Thread Size: M 10
- Number of pins: 2
- Colour Coding: grey
- Supplementary Article/Info 2: with seal ring
- Name: Olisurvellitus
- Manufacturer: MAX
Manufacturer: MAGNETI MARELLI
- Engine Code: ASZ
-
Vehicle Identification Number (VIN) from: 1J-
1- 320001 - Operating Mode: Mechanical
- Number of pins: 2
- Combi Switch Function: Normally Open Contact
- Colour: blue
- Material: Plastic
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Sensor Type: NTC Sensor
- Supplementary Article/Info 2: with seal ring
- Colour: black
- Number of pins: 2
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MEY
- Construction Year to: 12.2001
-
Vehicle Identification Number (VIN) to: F 1J-
X- 250 000 - Number of pins: 4
- Supplementary Article/Info 2: with seal ring
- Colour: black
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Number of pins: 4
- Socket colour: black
- Manufacturer: ERA
- Housing Colour: grey
- Number of pins: 2
- Spanner Size: 0
- Manufacturer: DELPHI
- Name: DE TS10278
- General Information: Intake air temperature sensor
- Manufacturer: VIKA
- Construction Year from: 04.2001
- Mounting Type: Plugged
- Voltage [V]: 12
-
Supplementary Article/Supplementary Info: with gasket/
seal - Colour: black
- Sensor Type: NTC Sensor
- Number of pins: 2
- Supplementary Article/Info 2: with retaining ring
-
Corresponds to the original part in colour: black,
grey - Fitting Depth [mm]: 20
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead -
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
-
Vehicle Identification Number (VIN) from: 1J-
X- 250 001 - Number of pins: 4
- Colour: green
-
Supplementary Article/Supplementary Info: with gasket/
seal - Version: IAM
- Article number of recommended accessories: 0905458
- Power [W]: 0.06
- Manufacturer: METZGER
- Construction Year to: 04.2001
- Vehicle Equipment: for vehicles with power steering
- Guarantee: 3 years guarantee
- Weight [kg]: 0.06
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Transmission Type: Manual Transmission
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.04
- Always compare old and new part (in particular OE No.):
- Name: CE 17SKV551
- Manufacturer: ESEN SKV
- Vehicle Equipment: for vehicles with power steering
- Construction Year to: 04.2001
- Connector Shape: D Shape
- Operating Mode: Hydraulic
- Colour Coding: grey
- Thread Size: M 10
- Thread Pitch [mm]: 1
- Number of pins: 2
-
Control Range [bar]: 0,
28 - 0, 40 - Supplementary Article/Info 2: with seal ring
- Name: OLISURVELLITUS
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Connector Shape: rectangular
- Material: Brass
- Number of pins: 4
- Plug Type: Male
- Sensor Type: NTC Sensor
- Spanner Size: 20 mm
- Thread Size: 0
- Manufacturer: NISSENS
Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.
-
Fabrication Number: ECC-
AU- 001 - Thread Size: M10x1
- Number of pins: 2
- Socket colour: grey
- Supplementary Article/Info 2: with seal ring
- Spanner Size: 22
- Connector Shape: oval
- Manufacturer: NTY
-
Name: NTY ECC-
AU- 001
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of pins: 4
- Manufacturer: ERA
- Number of pins: 2
- Weight [kg]: 0.3
- Packaging length [cm]: 12
- Packaging width [cm]: 8
- Packaging height [cm]: 6
- Number of pins: 4
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [kg]: 0.3
- Packaging length [cm]: 12
- Packaging width [cm]: 8
- Packaging height [cm]: 6
- Engine Code: ASZ
- Colour: blue
- Corresponds to the original part in colour: blue
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
Manufacturer: MAGNETI MARELLI
- Engine Code: ASZ
- Colour: blue
- Corresponds to the original part in colour: blue
- Manufacturer: FACET
- Construction Year from: 04.2001
- Mounting Type: Plugged
- Voltage [V]: 12
-
Supplementary Article/Supplementary Info: with gasket/
seal - Colour: green
- Sensor Type: NTC Sensor
- Number of pins: 4
- Supplementary Article/Info 2: with retaining ring
-
Corresponds to the original part in colour: green,
black - Assy./disassy. by qualified personnel required!:
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
Manufacturer: NRF
- Version: 2
- Connector Shape: D Shape
- Material: Plastic
- Number of pins: 2
- Plug Type: Female
- Sensor Type: NTC Sensor
- Spanner Size: 0
- Thread Size: 0
- Manufacturer: NISSENS
Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.
-
Vehicle Identification Number (VIN) to: 1J-
X- 990 000 - Number of pins: 4
- Housing Colour: blue
-
Corresponds to the original part in colour: green,
blue -
Supplementary Article/Supplementary Info: with gasket/
seal - Power [W]: 0.06
- Manufacturer: METZGER
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.05
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV
- Number of connectors: 4
- Connector Shape: round
-
Supplementary Article/Supplementary Info: with gasket/
seal - for OE number: 059 919 501 A
- Colour Coding: green
- Spring Design: Retaining Spring
- Number of pins: 4
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 04.2001
- Mounting Type: Plugged
- Voltage [V]: 12
-
Supplementary Article/Supplementary Info: with gasket/
seal - Colour: green
- Sensor Type: NTC Sensor
- Number of pins: 4
- Supplementary Article/Info 2: with retaining ring
-
Corresponds to the original part in colour: green,
blue - Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PT009107541
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Engine Code: ASZ
- Construction Year from: 05.2002
- Construction Year to: 05.2006
-
Name: ANDUR,
SISENDOHU TEMPERATUUR - Manufacturer: EPS
- Engine Code: ASZ
- Construction Year from: 05.2002
- Construction Year to: 05.2006
- Manufacturer: FACET
-
Transmission Type: 4-
Speed Automatic Transmission - Number of pins: 2
- Guarantee: 3 years guarantee
- Weight [kg]: 0.03
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV505
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Number of pins: 2
- Supplementary Article/Info 2: without cable
- Manufacturer: ERA
- for OE number: 038 957 147 F
- Length [mm]: 530
- Supplementary Article/Info 2: with seal ring
-
Fabrication Number: ECP-
AU- 013 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Outer Diameter [mm]: 20
- Weight [kg]: 0.02
- Number of connectors: 4
- Colour: black
- Required quantity: 1
- General Information: Coolant temperature sensor; 4 pin; black
- Manufacturer: BORSEHUNG
- Number of pins: 2
- Sensor Type: Inductive Sensor
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Vehicle Equipment: for vehicles with power steering
- Block Separation:
- Model Year to: 2001
-
Vehicle Identification Number (VIN) from: 1J-
W- 000 001 - Pressure from [bar]: 0.28
- Pressure to [bar]: 0.4
- Combi Switch Function: Normally Open Contact
- Colour: grey
- Spanner Size: 22
-
Thread Size: M10 x 1,
0 - Number of pins: 2
- Name: OLISURVELLITUS
- Manufacturer: MEY
- Quantity: 1
- Outer Diameter [mm]: 20
- Weight [kg]: 0.02
- Number of connectors: 4
- Colour: green
- Required quantity: 1
- General Information: Coolant temperature sensor; 4 pin; green
- Manufacturer: BORSEHUNG
- Number of pins: 2
- Connector Shape: rectangular
- Manufacturer: ERA
- Vehicle Identification Number (VIN) from: ******1J*Y*000001
- Length [mm]: 67
- Housing Colour: grey
- External Thread Size: M10 x 1
- Spanner Size: 22
- Number of connectors: 2
- Shifting Points [bar]: 0.3
- Weight [kg]: 0.055
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Cable Length [mm]: 530
- Number of pins: 3
- Sensor Type: Inductive Sensor
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
-
Vehicle Identification Number (VIN) from: 1J-
W- 000 001 - Plug housing design: Plug sleeve housing
- Manufacturer Restriction: VAG
- Cable Length [mm]: 500
- Number of pins: 2
- Supplementary Article/Info 2: with pipe
- Cable Cross Section [mm²]: 0.75
- Socket Width [mm]: 1.5
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- Cable insulation material: Silicone
- Current carrying capacity [A]: 9
- Operating voltage [V]: 24
-
for OE number: 1J6 943 021 B,
1JE 943 021, 1K8 943 021 C - for article number: 70660022
- SVHC: No SVHC present!
-
Name: Kaabli remondikomplekt,
- Manufacturer: HBE
Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals, with heat shrink tubing
- Vehicle Identification Number (VIN) from: ******1J*Y*000001
- Housing Colour: grey
- Length [mm]: 67
- External Thread Size: M10 x 1
- Spanner Size: 22
- Number of connectors: 2
- Shifting Points [bar]: 0.3
- Weight [kg]: 0.055
- Name: SW 33 10 4569
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year from: 04.2001
- Construction Year to: 05.2006
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.06
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV486
- Construction Year to: 04.2001
- Thread Size: M10 x 1
- Number of pins: 2
- Pressure to [bar]: 0.4
- Pressure [bar]: 0.28
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Cable Length [mm]: 530
- Number of connectors: 3
- Housing Colour: black
-
Lisainfo: Sensor,
crankshaft pulse -
Additional information: Sensor,
crankshaft pulse
- for OE number: 1100749
- Cable Length [mm]: 500
- Sensor Type: Passive sensor
- Manufacturer: KAMOKA
- Sensor Type: NTC Sensor
- Mounting Type: Clamped
- Connector Shape: rectangular
- Number of pins: 4
- Socket colour: black
- for OE number: 058919501A
- Supplementary Article/Info 2: with seal ring
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
- Quantity: 1
-
Control Range [bar]: 28/
40BAR -
General Information: Oil pressure sensor; 28/
40 BAR - Manufacturer: BORSEHUNG
- Pressure [bar]: 0.35
- Thread Size: M10 x 1
- Number of pins: 2
- Technical Information Number: circuit N.O.
- Manufacturer: ERA
- Cable Length [mm]: 450
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.1
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV509
- Length [mm]: 445
- Number of pins: 3
- Sensor Type: Hall Sensor
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- General Information: Transmission speed sensor
- Manufacturer: VIKA
- Connector Shape: rectangular
- Material: Brass
- Number of pins: 4
- Plug Type: Male
- Sensor Type: NTC Sensor
- Spanner Size: 20 mm
- Thread Size: 0
- Name: NI 207061
- Manufacturer: NISSENS
Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.
- for OE number: 058 919 501 A
- Number of pins: 4
- Fitted Diameter [mm]: 20
- Housing Colour: black
- Manufacturer: FAE
- Engine Code: ASZ
- Cable Length [mm]: 530
-
Name: ANDUR,
VNTVOLL - Manufacturer: MAX
Manufacturer: NRF
- for OE number: 03G 906 433
- Sensor Type: Active sensor
- Manufacturer: KAMOKA
- for OE number: 1100748
- Sensor Type: Active sensor
- Manufacturer: KAMOKA
- Thread Size: 20 mm
- Manufacturer: VERNET
- Construction Year from: 04.2001
-
Supplementary Article/Supplementary Info: with gasket/
seal - Number of pins: 4
- Mounting Type: Pressed
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PT358058201
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Cable Length [mm]: 515
- Number of pins: 3
-
Name: ANDUR,
VNTVOLL - Manufacturer: DLP
- Quality class: PJ
Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"
- Construction Year from: 04.2001
- Voltage [V]: 12
- Length [mm]: 340
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.08
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV365
- Number of connectors: 4
- Diameter [mm]: 25
- Length [mm]: 50
-
Supplementary Article/Supplementary Info: with gasket/
seal - for OE number: 059 919 501
- Spring Design: Retaining Spring
- Number of pins: 4
- Connector Shape: angular
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of pins: 4
- Colour Coding: white
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Diameter [mm]: 26
- Number of pins: 2
- Supplementary Article/Info 2: with seal ring
- Spring Design: Retaining Spring
- Length [mm]: 20
- Housing Colour: blue
- Height [mm]: 57
- Colour: grey
- Number of connectors: 2
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Required quantity: 1
- Number of pins: 3
- Sensor Type: Inductive Sensor
- Supplementary Article/Info 2: with cable
- Housing Colour: black
- Socket colour: grey
-
Name: CZUJNIK POO½ENIA WAU KORB. VW BORA 1,
9TDI 00- - Manufacturer: BRM
- Connector Shape: D Shape
- Number of pins: 3
-
for OE number: 1 431 017,
038 957 147F - Supplementary Article/Info 2: with cable
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Construction Year from: 04.2001
- Number of pins: 3
- Connector Shape: D Shape
- Sensor Type: Hall Sensor
- for OE number: 045957147B
-
Name: Andur,
Nukkvollipositsioon - Manufacturer: MD
- Quantity: 1
- Weight [kg]: 0.04
- Number of connectors: 3
- Required quantity: 1
- General Information: Camshaft position sensor
- Manufacturer: VIKA
- Construction Year from: 04.2001
- Resistor [Ohm]: 500
- Cable Length [mm]: 530
- Sensor Type: Inductive Sensor
- Number of pins: 3
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PU009167251
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Supplementary Article/Info 2: with cable
- Length [mm]: 445
- Sensor Type: Hall Sensor
- Number of connectors: 3
- Manufacturer: VERNET
- Required quantity: 1
- Voltage [V]: 12
- Number of pins: 3
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: with cable
- Housing Colour: black
-
Name: CZUJNIK POO½ENIA WAKA ROZRZ. VW POLO 01-
- Manufacturer: BRM
- Construction Year from: 04.2001
- Manufacturer: MAGNETI MARELLI
- Supplementary Article/Info 2: with cable
- Length [mm]: 530
- Height [mm]: 46
- Resistor [Ohm]: 190
- Number of connectors: 3
- Manufacturer: VERNET
- Model Year to: 2001
-
Vehicle Identification Number (VIN) from: 1J-
W- 000 001 - Length [mm]: 22
- Height [mm]: 61
- Thread Size: M10 x 1
-
Control Range [bar]: 0,
28 - 0, 40 - Vehicle Equipment: for vehicles with power steering
- Number of pins: 2
- Manufacturer: VIEROL
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Supplementary Article/Info 2: without integrated air temperature sensor
- Number of pins: 5
- Connector Shape: D Shape
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
-
Additional information: 120-
08- 071 ABAK -
Lisainfo: 120-
08- 071 ABAK
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Length [mm]: 380
- Number of pins: 3
-
Cable Length [mm]: 445,
330 - Required quantity: 1
-
Sensor Type: Active sensor,
Hall Sensor - Number of connectors: 3
- Rated Voltage [V]: 12
- Supplementary Article/Info 2: with cable
- Housing Colour: black
- Connector Shape: D Shape
- Number of mounting bores: 1
- Socket colour: black
- for OE number: 045 957 147 A
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Sensor Type: Inductive Sensor
-
Supplementary Article/Info 2: with seal ring,
with protection hose - Cable Length [mm]: 506
- Number of pins: 3
-
Name: ANDUR,
VNTVOLL - Manufacturer: MEY
- Length [mm]: 245
- Number of pins: 3
-
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: DLP
Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"
- Sensor Type: Hall Sensor
- Cable Length [mm]: 306
- Supplementary Article/Supplementary Info: with cable protection pipe
- Number of pins: 3
-
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: MEY
- Length [mm]: 530
- Number of connectors: 3
- Cable Length [mm]: 500
- Weight [kg]: 0.09
- Supplementary Article/Info 2: with seal ring
-
Name: ANDUR,
VNTVOLL - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: ASZ
- Colour: black
- Temperature range [°C]: 120
- Fitting Depth [mm]: 20
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
- Engine Code: ASZ
- Length [mm]: 530
-
Name: ANDUR,
VNTVOLL - Manufacturer: EPS
-
Vehicle Identification Number (VIN) from: 1J-
Y- 000 001 - Manufacturer Restriction: VAG
- Number of pins: 4
- Cable Length [mm]: 200
- Cable Cross Section [mm²]: 0.75
-
Contact surface: Gold-
plated - Socket Width [mm]: 1.6
-
Supplementary Article/Supplementary Info: with socket housing,
with gasket/ seal - Supplementary Article/Info 2: with pipe
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- Cable insulation material: Silicone
- SVHC: No SVHC present!
-
Name: Kaabli remondikomplekt,
rattaprete andur - Manufacturer: HBE
-
Transmission Type: 4-
Speed Automatic Transmission - Length [mm]: 59
-
Supplementary Article/Info 2: for crankshaft,
with seal ring, without cable - Required quantity: 1
- Resistor [Ohm]: 850
- Colour: black
- Sensor Type: Inductive Sensor
- Number of pins: 2
- Number of connectors: 2
- Rated Voltage [V]: 12
- Fitting Depth [mm]: 30.3
- Connector Shape: D Shape
- Manufacturer: VIEROL
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: ASZ
- Colour: black
- Fitting Depth [mm]: 20
- Manufacturer: FACET
- Engine Code: ASZ
- Length [mm]: 530
- Manufacturer: FACET
- Construction Year from: 04.2002
- Vehicle Identification Number (VIN) from: 1J2600001
- Housing Type: with housing
-
Fabrication Number: EPP-
AU- 001
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of pins: 4
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [kg]: 0.3
- Packaging length [cm]: 12
- Packaging width [cm]: 8
- Packaging height [cm]: 6
- for OE number: 058919501A
- Length [mm]: 358
- Number of connectors: 3
- Cable Length [mm]: 265
- Weight [kg]: 0.04
- Manufacturer: FEBI BILSTEIN
- Additional information: F37607
- Lisainfo: F37607
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Connector Shape: D Shape
- Number of pins: 3
- Supplementary Article/Info 2: with cable
- Supplementary Article/Supplementary Info: with cable protection pipe
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Voltage [V]: 12
-
Fabrication Number: EPP-
AU- 031 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Alternatively:
- Number of pins: 3
- Alternative Repair Kit: 550254
- Total Length [mm]: 450
- Manufacturer: ERA
- Number of pins: 3
- Length [mm]: 530
- Sensor Type: Inductive Sensor
- for OE number: 038957147F
- Manufacturer: MEAT & DORIA
- Number of pins: 5
-
Fabrication Number: EPP-
AU- 018 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Construction Year from: 04.2001
- Construction Year to: 05.2006
- Sensor Type: Hall Sensor
- Number of pins: 3
- Voltage [V]: 12
- Connector Shape: D Shape
- Supplementary Article/Info 2: with cable
-
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: VAL
- Lisainfo: VAL253807
- Additional information: VAL253807
- Number of pins: 5
- Housing Type: with housing
- Connector Shape: D Shape
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Construction Year from: 04.2001
- Construction Year to: 05.2006
- Sensor Type: Inductive Sensor
- Number of pins: 3
- Voltage [V]: 12
- Connector Shape: D Shape
- Supplementary Article/Info 2: with cable
- Resistor [Ohm]: 500
-
Name: ANDUR,
VNTVOLL - Manufacturer: VAL
- Length [mm]: 330
- Sensor Type: Hall Sensor
- Number of pins: 3
- Manufacturer: METZGER
- Engine Code: ASZ
- Length [mm]: 340
-
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: EPS
- Length [mm]: 358
- Number of connectors: 3
- Cable Length [mm]: 265
- Weight [kg]: 0.04
- Name: SW 30 93 7607
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: ASZ
- Length [mm]: 340
- Manufacturer: FACET
- Construction Year from: 04.2001
- Length [mm]: 260
- Sensor Type: Hall Sensor
- Number of pins: 3
- Assy./disassy. by qualified personnel required!:
-
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
-
Vehicle Identification Number (VIN) to: 1J-
2- 600000 - Housing Type: with housing
- Number of pins: 5
- Housing material: Plastic
- Connector Shape: D Shape
- Number of mounting bores: 2
- Supplementary Article/Info 2: with integrated grille
- Recommended additional repairs: Air Filter
- New Part:
- Used part return not required:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Manufacturer: VIEROL
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 05.2002
- Construction Year to: 05.2006
- Voltage [V]: 12
- Number of connectors: 2
- Fitting Depth [mm]: 44
- Manufacturer: BERU
-
Fabrication Number: EPP-
VW- 010 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Guarantee: 5 years guarantee
- Height [mm]: 18.45
-
General Information: Sold in Hueco brand:
printing and packaging - Manufacturer: HUCO
- Operating Mode: Electric
- Manufacturer: MAGNETI MARELLI
- Engine Code: ASZ
- Construction Year to: 04.2002
- Cable Length [mm]: 530
- Number of pins: 3
- Manufacturer: FAE
- Construction Year to: 03.2002
- Vehicle Identification Number (VIN) to: 1J2600000
- Number of pins: 5
- Plug Type: Male
- Voltage [V]: 12
- Quality class: PJ
- Name: Air flow sensor
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 05.2002
-
Vehicle Identification Number (VIN) from: 1J-
2- 600 001 - Housing Type: with housing
- Number of pins: 5
- Plug Type: Male
- Voltage [V]: 12
- Quality class: PJ
- Name: Air flow sensor
- for OE number: 06A906461D
- Number of pins: 5
- Voltage [V]: 12
- Manufacturer: DELLO AUTOMEGA
-
Vehicle Identification Number (VIN) from: 1J-
2- 600 001 - Climate Zones: for cold climate zones
- for OE number: 28906461
- Number of pins: 5
- Voltage [V]: 12
- Manufacturer: DELLO AUTOMEGA
- for OE number: 06A 906 461 D
- Manufacturer: KAMOKA
- for OE number: 1209109
- Manufacturer: KAMOKA
- Voltage [V]: 12
- for OE number: 059 906 461 A
- Manufacturer: KAMOKA
- Recommended additional repairs: Air Filter
- Name: OHUMASSIMOOTJA
- Manufacturer: MAX
- Construction Year from: 04.2001
- Manufacturer: BOSCH
-
Vehicle Identification Number (VIN) from: 1J-
2- 600 001 - Climate Zones: for cold climate zones
- for OE number: 1209109
- Manufacturer: DELLO AUTOMEGA
- Construction Year from: 05.2002
- Vehicle Identification Number (VIN) from: 1J..2..600001
- Recommended additional repairs: Air Filter
- Name: OHUMASSIMOOTJA
- Manufacturer: MAX
- Engine Code: ASZ
-
Vehicle Identification Number (VIN) from: 1J-
2- 600001 - Voltage [V]: 12
- Name: Ohumassimootja
- Manufacturer: MAX
- Construction Year from: 05.2001
-
Vehicle Identification Number (VIN) from: 1J-
2- 600 001 - Housing Type: with housing
- Number of pins: 5
- Manufacturer: JP GROUP
- Lisainfo: Air meter
- Additional information: Air meter
- Engine Code: ASZ
- Voltage [V]: 12
- Name: OHUMASSIMOOTJA
- Manufacturer: MAX
- Engine Code: ASZ
- Construction Year from: 05.2001
- Construction Year to: 05.2006
- Voltage [V]: 12
- Housing Type: with housing
- Number of pins: 5
- Guarantee: 3 years guarantee
- New Part:
- Used part return not required:
- Weight [kg]: 0.32
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 07SKV083
- Voltage [V]: 12
- Number of pins: 5
- Guarantee: 3 years guarantee
- New Part:
- Used part return not required:
- Weight [kg]: 0.07
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 07SKV508
- Manufacturer: ESEN SKV
- Voltage [V]: 12
- Number of pins: 5
- Guarantee: 3 years guarantee
- New Part:
- Used part return not required:
- Weight [kg]: 0.07
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 07SKV501
- Manufacturer: ESEN SKV
-
Vehicle Identification Number (VIN) from: 1J-
2- 600001 - Housing Type: with housing
- Number of pins: 5
- Housing material: Plastic
- Connector Shape: D Shape
- Number of mounting bores: 2
- Supplementary Article/Info 2: with integrated grille
- Recommended additional repairs: Air Filter
- New Part:
- Used part return not required:
- Consult accessories list for recommended additional repairs:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Quantity: 1
- Recommended additional repairs: Air Filter
- General Information: Air mass meter
- Manufacturer: VIKA
- Construction Year from: 04.2001
- Construction Year to: 04.2002
- Vehicle Identification Number (VIN) to: 1J..2..600 000
- Required quantity: 1
- Voltage [V]: 12
- Housing Type: with housing
- Number of pins: 5
- Guarantee: 3 years guarantee
- New Part:
- Used part return not required:
- Weight [kg]: 0.27
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV
- Construction Year from: 05.2001
- Quality: OE EQUIVALENT
- for OE number: A05033320AA
- Manufacturer: MEAT & DORIA
- Construction Year from: 04.2002
- Vehicle Identification Number (VIN) from: 1J_2_600001
- Mounting Type: Bolted
- Number of pins: 5
- Assy./disassy. by qualified personnel required!:
- Name: Ohumassimootja
- Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Guarantee: 5 years guarantee
-
General Information: Sold in Hueco brand:
printing and packaging - Manufacturer: HUCO
- Name: HU 138976
- Guarantee: 5 years guarantee
- Cable Length [mm]: 445
- Number of pins: 3
- Manufacturer: HUCO
- Vehicle Identification Number (VIN) from: 1J..2..600001
- Construction Year from: 05.2002
- Supplementary Article/Supplementary Info: without suction pipe
- Guarantee: 5 years guarantee
-
General Information: Sold in Hueco brand:
printing and packaging - Name: OHUMASSIMOOTJA
- Manufacturer: HUC
Technical Information: Designed as plug-in sensor: Original tube is used furthermore. Look out for contamination!
- Operating Mode: Electric
- Name: OHUMASSIMOOTJA
- Manufacturer: MAG
- Construction Year to: 03.2002
- Vehicle Identification Number (VIN) to: 1J2600000
- Housing Type: with housing
- Number of pins: 5
- Plug Type: Male
- Housing Colour: black
- Voltage [V]: 12
- Recommended additional repairs: Air Filter
- Name: OHUMASSIMOOTJA
- Manufacturer: DLP
- Construction Year from: 04.2002
- Vehicle Identification Number (VIN) from: 1J2600001
- Housing Type: with housing
- Number of pins: 5
- Plug Type: Male
- Housing Colour: black
- Voltage [V]: 12
- Recommended additional repairs: Air Filter
- Name: OHUMASSIMOOTJA
- Manufacturer: DLP
- Operating Mode: Electric
- Manufacturer: MAGNETI MARELLI
- Construction Year from: 01.2002
-
Vehicle Identification Number (VIN) from: 1J-
2- 600 001 - Engine Code: ASZ
- Operating Mode: Electric
- Voltage [V]: 12
- Housing Type: without housing
- Name: OHUMASSIMOOTJA
- Manufacturer: PIE
- Quality: OE EQUIVALENT
- for OE number: 000VT5077
- Manufacturer: MEAT & DORIA
- Vehicle Identification Number (VIN) from: 1J..2..600001
- Construction Year from: 05.2002
- Supplementary Article/Supplementary Info: without suction pipe
-
General Information: Sold in Hitachi brand:
printing and packaging - Manufacturer: HUCO
Technical Information: Designed as plug-in sensor: Original tube is used furthermore. Look out for contamination!
-
Vehicle Identification Number (VIN) to: 1J-
2- 600 000 - Engine Code: ASZ
- Operating Mode: Electric
- Voltage [V]: 12
- Housing Type: without housing
- Name: OHUMASSIMOOTJA
- Manufacturer: PIE
- Construction Year from: 04.2002
- Vehicle Identification Number (VIN) from: 1J2600001
- Housing Type: without housing
- Number of pins: 5
- Plug Type: Male
- Housing Colour: black
- Voltage [V]: 12
- Recommended additional repairs: Air Filter
- Manufacturer: DELPHI ELEKTRONIKA
- Construction Year from: 05.2002
- Vehicle Identification Number (VIN) from: 1J..2..600 001
- Recommended additional repairs: Air Filter
- Name: Ohumassimootja
- Manufacturer: BOS
- Supplementary Article/Supplementary Info: without pipe
- Supplementary Article/Info 2: Can only be fitted with original mounting
- for OE number: 074906461BX
- Manufacturer: MEAT&DORIA
- Construction Year to: 03.2002
- Vehicle Identification Number (VIN) to: 1J2600000
- Housing Type: without housing
- Number of pins: 5
- Plug Type: Male
- Housing Colour: black
- Voltage [V]: 12
- Recommended additional repairs: Air Filter
- Manufacturer: DELPHI
- Construction Year from: 04.2001
- Construction Year to: 05.2006
- Number of pins: 5
- Connector Shape: D Shape
-
Sensor Type: Hot-
film Sensor - Voltage [V]: 12
- Length [mm]: 182
- Width [mm]: 165
- Height [mm]: 125
- Manufacturer: VALEO
- Construction Year from: 04.2001
- Construction Year to: 04.2002
- Vehicle Identification Number (VIN) to: 1J..2..600 000
- Recommended additional repairs: Air Filter
- Name: Ohumassimootja
- Manufacturer: BOS
- Sensor Type: Hall Sensor
- Mounting Type: Screw Connection
- Shape: D Shape
- Number of pins: 3
- Cable Length [mm]: 410
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks