Passenger cars • VW • GOLF IV Variant (1J5) • GOLF IV Variant (1J5) 1.9 TDI 4motion (ATD) (09.2000 - 06.2006) • Flywheel

Passenger cars VW GOLF IV Variant (1J5) GOLF IV Variant (1J5) 1.9 TDI 4motion (ATD) (09.2000 - 06.2006) Flywheel

Assembly categories

Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior Service

Product

Description

In stock

Price

(incl. VAT)

57365
Flywheel Bolt

AIC

Quantity per packing unit: 8
Thread Size: M10 x 1 x 22
Strength class: 12.9
Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

Orderable

4.33

Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimus tööpäeviti kell 17.00

Additional information OE codes Linked vehicles

411 0133 10
Screw Set, flywheel

Schaeffler LuK

Number of bolts/screws: 6
SVHC: No SVHC present!
Manufacturer: LUK
Name: LU 411013310
Lisainfo: 411 0133 10
Additional information: 411 0133 10

Tellitav 1p

215

7.76

Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimus tööpäeviti kell 17.00

Ord. 1 b-day

8.25

Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimused hiljemalt 17.00

Tellitav 1 tp

8.60

Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimus läheb 17.00 Saabub meie lattu alates 15.00

Additional information OE codes Linked vehicles

415 0654 10
Flywheel

Schaeffler LuK

Transmission Type: Manual Transmission
Supplementary Article/Info 2: with screw set
Number of mounting bores: 6
SVHC: No SVHC present!
Manufacturer: LUK
Name: LU 415065410

Tellitav 1p

373.96

Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimus tööpäeviti kell 17.00

Orderable

375.01

Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimus tööpäeviti kell 17.00

Tellitav 1 tp

382.55

Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimus läheb 17.00 Saabub meie lattu alates 15.00

Ord. 1 b-day

397.46

Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimused hiljemalt 17.00

Tellitav

437.43

Kaup on euroopa kesklaos. Tarne 2 tööpäeva LakiAuto lattu. Tellimuse saadame 17.00

Additional information OE codes Linked vehicles

2294 000 871
Flywheel

SACHS

Outer Diameter [mm]: 240
Supplementary Article/Supplementary Info: with flywheel screws
Manufacturer: SACHS

SVHC: No information available, please contact the manufacturer!

Tellitav 1p

414.39

Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimus tööpäeviti kell 17.00

Orderable

470.19

Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimus tööpäeviti kell 17.00

Tellitav

477.44

Kaup on euroopa kesklaos. Tarne 2 tööpäeva LakiAuto lattu. Tellimuse saadame 17.00

Additional information OE codes Linked vehicles

845050
Conversion Set, clutch

VALEO

Transmission Type: Manual Transmission
Construction Year to: 06.2005
New Part:
Tightening Torque [Nm]: 60
Tightening angle [degrees]: 90
Clutch Pressure Plate Outer Diameter [mm]: 240
Number of Teeth: 23
Weight [kg]: 17.72
Manufacturer: VALEO
Name: VA 845050

Supplementary Article/Supplementary Info: with single-mass flywheel, with central slave cylinder Clutch: Conversion from dual-mass flywheel to single-mass flywheel

Orderable

452.15

Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimus tööpäeviti kell 17.00

Tellitav 1 tp

465.63

Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimus läheb 17.00 Saabub meie lattu alates 15.00

Tellitav

563.39

Kaup on euroopa kesklaos. Tarne 2 tööpäeva LakiAuto lattu. Tellimuse saadame 17.00

Additional information OE codes Linked vehicles

835050
Conversion Set, clutch

VALEO

Construction Year to: 06.2005
Engine Code: ATD
Transmission Code: FBS
Transmission Type: 6-Speed Manual Transmission
New Part:
Tightening Torque [Nm]: 60
Tightening angle [degrees]: 90
Clutch Pressure Plate Outer Diameter [mm]: 240
Number of Teeth: 23
Hub Profile: 24,2 x 21,8
Weight [kg]: 17.59
Manufacturer: VALEO
Name: VA 835050

Supplementary Article/Supplementary Info: with single-mass flywheel, without central slave cylinder Clutch: Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch Supplementary Article/Info 2: with screw set, Special tools for mounting not necessary

Tellitav 1 tp

471.20

Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimus läheb 17.00 Saabub meie lattu alates 15.00

Tellitav 1p

472.35

Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimus tööpäeviti kell 17.00

Orderable

480.46

Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimus tööpäeviti kell 17.00

Additional information OE codes Linked vehicles

836225
Flywheel

VALEO

Construction Year to: 06.2005
Engine Code: ATD
Transmission Code: FBS
Transmission Type: 6-Speed Manual Transmission
Engine Features/Arrangement: for engines with dual-mass flywheel
for flywheel manufacturer: LUK
Outer Diameter [mm]: 289
Number of mounting bores: 6
Supplementary Article/Info 2: with screw set
Tightening Torque [Nm]: 60
Tightening angle [degrees]: 90
for flywheel depth [mm]: 60.73
Weight [kg]: 11.65
Manufacturer: VALEO

Tellitav

476.14

Kaup on euroopa kesklaos. Tarne 2 tööpäeva LakiAuto lattu. Tellimuse saadame 17.00

Additional information OE codes Linked vehicles

Navigation Languages

Catalogue

History

1. Üldtingimused.

Käesolevad müügitingimused on leping e-poe klientide (Ostja) ja S.V Ärigrupp OÜ (Müüja) vahel ostmise ja müümise reeglite kehtestamiseks ja osapoolte vaidluste lahendamiseks. Neis tingimustes sätestatakse Müüja ja Ostja õigused ja kohustused, vastutus, kaupade omandamise ja nende eest tasumise tingimused, tarne- ja reklamatsiooni kord. Müügitingimused ei saa olla vastuolus Eesti Vabariigis kehtivate õigusnormidega. Müüja jätab endale õiguse käesolevaid tingimusi ilma ette teatamata muuta või täiendada. Kõik muudatused ja täiendused jõustuvad veebilehel avaldamise hetkest. Müüja ei ole vastutav võimalike kahjude eest, mis tekkisid seetõttu, et Ostja ei ole käesolevaid Tingimusi lugenud.

2. Kliendi andmed.

Ostja poolt Müüjale edastatud isikuandmeid käideldakse vastavuses Andmekaitseseadusega. Ostja vastutab oma esitatavate andmete õigsuse eest. Ostja vastutab selle eest, et tema sisselogimisandmed ei satuks kolmandate isikute kätte. Müüja ei vastuta tagajärgede eest, mida on põhjustanud Ostja sisselogimisandmete sattumine kolmandate isikute kätte Ostja süü läbi.

3. Kaupade hind ja informatsiooni täpsus.

Toodete hinnad on esitatud eurodes ilma transpordikuluta. Hinnad sisaldavad käibemaksu. Müüja ei vastuta tooteinfo ebatäpsuse eest, see informatsioon pärineb tootjatelt. Hinna- ja tooteinfo võib muutuda, muudatused jõustuvad alates avaldamise hetkest. Juhul, kui tehnilise vea tõttu on mõne pakutava toote hind muutunud ebamõistlikult odavaks ja Müüja ei ole eraldi märkinud, et tegemist on tema poolt Kaubale kehtestatud allahindlusega, siis on Müüjal õigus taganeda ostu-müügitehingust. Lisaks Kauba hinnale kohustub Ostja tasuma ka Kaubaga kaasnevad transpordikulud. Transpordikulu suurus oleneb transpordi viisist, sihtkohast, saadetise kaalust ja mõõtudest.

4. Tellimuse esitamine.

Ostja saab tellimuse esitada LakiNet.ee veebilehe tellimussüsteemi kaudu või meiliga aadressil info@lakiauto.ee . Peale tellimuse sooritamist saadab Müüja Ostja e-posti aadressile tellimuse kinnituse. Kauba eest on võimalik tasuda üle Pangalingi või ülekandega. Ostja ja Müüja vaheline müügitehing loetakse sõlmituks hetkest, kui Ostja on nõustunud müügitingimustega ja tellimuse edukalt sooritanud. Tellimuse täitmist alustatakse peale tellimuse täissumma laekumist Müüja pangaarvele. Tellimus tühistatakse automaatselt, kui Ostja ei ole tellimuse summat õigeaegselt tasunud. Tellimuse tähtaega arvestatakse tööpäevades. Tarnetähtaeg kehtib juhul, kui tellimise hetkel on kaup varuosade tarnija laos. Müüjal on õigus keelduda tellimuse täitmisest kui tellimuse täitmine on võimatu temast sõltumatutel asjaoludel.

5. Kaupade kättetoimetamine.

Ostjal on võimalus kaup kätte saada Laki Auto Tallinna või Tartu esindustes. Soovi korral toimetatakse kaup Ostjale kulleriga, sellisel juhul lisandub kauba hinnale transpordikulu vastavalt hinnakirjale. Transpordiviisi valiku teeb Ostja tellimust vormistades. Tellitud kaup saadetakse tellimuses märgitud aadressile. Juhul, kui tarne Ostja märgitud aadressil ei ole võimalik, tagastatakse kaup Müüja lattu. Korduva tarne kulu kannab Ostja. Müüja ei vastuta kauba tarne hilinemise ja sellest põhjustatud kahjude eest.

6. Tellimuse tühistamine ja toote tagastamine.

Füüsilisest isikust Ostjal on õigus taganeda ostu-müügilepingust 14 kalendripäeva jooksul alates Kauba kättesaamisest. Lepingu katkestamiseks tuleb kaup tagastada. Tagastatav kaup ei tohi olla kasutatud ja peab olema originaalpakendis. Kaubal peavad alles olema kõik originaalkleebised ja sildid. Kui pakend puudub, on määrdunud või rikutud, on Müüjal õigus keelduda kauba tagasi ostmisest. Ostjapoolsel lepingust taganemisel kannab toote tagastamise kulud Ostja. Ostjal puudub õigus ostu-müügilepingust taganeda, kui ostu-müügilepingu objektiks on toode mis on valmistatud Ostja tellimuse alusel ja Müüjal puudub võimalus toote tagastamiseks tarnijale.

7. Garantii.

Kõigi kaupade puhul kehtib eraisikust ostjale 24 kuuline garantii. Juriidilisest isikust ostja puhul kehtib tootja poolt määratud garantiiaeg. Garantiiperioodi arvestatakse alates kauba üleandmisest ostjale. Toote ümbervahetamine või garantiiremont ei pikenda esialgset garantiiaega. Garantii aluseks on Müüja poolt väljastatud müügidokument. Garantii hõlmab ennekõike tootel ilmnenud tootmis- ja materjalivigu ning garantii alla ei kuulu vead mis põhjustatud normaalsest kulumisest, valest paigaldusest, valest kasutamisest, muudest välisteguritest põhjustatud vigadest. Garantii kehtib ainult tingimusel, et toode on paigaldatud ametlikus autotöökojas ja paigaldamisel on täidetud kõik tootjapoolsed nõuded.

8. Vaidluste lahendamine.

Ostja ja Müüja vahel tekkinud vaidlused lahendatakse läbirääkimiste teel. Kui kokkuleppele ei jõuta, on pooltel õigus pöörduda Tarbijakaitseametisse või Harju Maakohtusse. Erimeelsuste lahendamisel lähtutakse Eesti Vabariigis kehtivatest seadustest.

1.02.2018
S. V. Ärigrupp OÜ
Laki 7, Tallinn

1. General provisions

1.1. This privacy policy regulates the principles of collection, processing, and storage of personal data. Personal data is processed and stored by S. V. Ärigrupp OÜ, who is the controller of the personal data (hereinafter the controller).

1.2. For the purposes of this privacy policy, a data subject means the customer or another natural person whose personal data is processed by the controller.

1.3. For the purposes of this privacy policy, a customer means anyone who purchases goods or services on the controller’s website.

1.4. The controller observes the principles relating to personal data processing provided by legislation and, among other things, processes personal data in a lawful, fair, and secure manner. The controller is able to declare that personal data has been processed in accordance with the provisions of the legislation.

2. Collection, processing, and storage of personal data

2.1. The personal data collected, processed, and stored by the controller has been collected electronically, mainly via the website and e-mail.

2.2. By sharing their personal data, the data subject grants the controller the right to collect, arrange, use and administer, for the purpose defined in the privacy policy, the personal data that the data subject shares with the controller either directly or indirectly when purchasing goods or services on the website.

2.3. The data subject is liable for the accuracy, correctness, and integrity of the data submitted by them. The submission of knowingly false data is regarded as a breach of the privacy policy. The data subject is required to immediately notify the controller of any changes in the data submitted.

2.4. The controller is not liable for any damage or loss caused to the data subject or a third party as a result of the submission of false data by the data subject.

3. Processing of personal data of customers

3.1. The controller may process the following personal data of the data subject:

3.1.1. Given name and surname;

3.1.2. Telephone number;

3.1.3. E-mail address;

3.1.4. Delivery address;

3.2. In addition to the foregoing, the controller has the right to collect data about the customer that are available in public registers.

3.3. The legal basis for the processing of personal data points (a), (b), (c) and (f) of Article 6(1) of the General Data Protection Regulation:

(a) the data subject has given consent to the processing of his or her personal data for one or more specific purposes;

(b) processing is necessary for the performance of a contract to which the data subject is a party or in order to take steps at the request of the data subject prior to entering into a contract;

(c) processing is necessary for compliance with a legal obligation to which the controller is subject;

(f) processing is necessary for the purposes of the legitimate interests pursued by the controller or by a third party, except where such interests are overridden by the interests or fundamental rights and freedoms of the data subject which require protection of personal data, in particular where the data subject is a child.

3.4. Processing of personal data according to the purpose of processing:

3.4.1. Purpose of processing – security and safety
The maximum period of storage of personal data – according to the terms specified by law

3.4.2. Purpose of processing – the processing of orders
Maximum period of storage of personal data – 7 years.

3.4.3. Purpose of processing – ensuring the functioning of online store services
Maximum period of storage of personal data – 7 years.

3.4.4. Purpose of processing – customer management
Maximum period of storage of personal data – 7 years.

3.4.5. Purpose of processing – financial activities, accounting
Maximum period of storage of personal data – according to the terms specified by law

3.4.6. Purpose of processing – marketingMaximum period of storage of personal data – 7 years.

3.5. The controller has the right to share personal data of customers with third parties such as processors, accountants, transport and courier companies, companies providing transfer services. The controller is in charge of the processing of personal data.

3.6. The controller processes and stores personal data of the data subject implementing the organizational and technical measures to ensure that the personal data is protected against any accidental or unlawful destruction, alteration, disclosure, and any other unlawful processing.

3.7. The controller stores the data of the data subjects depending on the purpose of processing, but no longer than for 7 years.

4. Rights of the data subject

4.1. The data subject has the right to gain access to and examine their personal data.

4.2. The data subject has the right to obtain information on the processing of their personal data.

4.3. The data subject has the right to modify or rectify inaccurate data.

4.4. If the controller processes personal data of the data subject based on the consent granted by the latter, the data subject has the right to withdraw their consent at any time.

4.5. To exercise their rights, the data subject can contact the customer support of the online store at info@lakiauto.ee.

4.6. To protect their rights, the data subject can file a complaint with the Data Protection Inspectorate.

5. Final provisions

5.1. These data protection terms and conditions have been prepared in compliance with Regulation (EU) 2016/679 of the European Parliament and of the Council on the protection of natural persons with regard to the processing of personal data and on the free movement of such data, and repealing Directive 95/46/EC (General Data Protection Regulation), the Personal Data Protection Act of the Republic of Estonia and legislation of the Republic of Estonia and the European Union.

5.2. The controller has the right to amend the data protection terms and conditions in part or in full, notifying the data subjects of the amendments via https://lakinet.ee/.

Articles

Assembly categories

Product

Description

In stock

Price

(incl. VAT)