• Engine Code: AZD
• Switch point from [bar]: 1.2
• Switch point to [bar]: 1.6
• Colour Coding: black
• Number of connectors: 1
• External Thread [mm]: M10x1
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Engine Code: AZD
• Vehicle Identification Number (VIN) from: 1J-X-250 001
• Thread Size: M10X1
• Colour: black
• Number of pins: 1
• Manufacturer: DELLO AUTOMEGA

• Engine Code: AZD
• Colour: black
• Number of pins: 1
• Thread Size: M10x1
• Pressure from [bar]: 1.2
• Pressure to [bar]: 1.6
• Name: OLISURVELšLITUS
• Manufacturer: MAX
• Lisainfo: 21-0107
• Additional information: 21-0107

• Switch point from [bar]: 1.4
• Switch point to [bar]: 1.6
• General Information: Oil pressure sensor; 1.4Bar-1.6Bar
• Manufacturer: VIKA

• Vehicle Identification Number (VIN) from: 1J-X-250001
• Connector Shape: D Shape
• Operating Mode: Hydraulic
• Colour Coding: black
• Thread Size: M 10
• Thread Pitch [mm]: 1
• Number of pins: 1
• Control Range [bar]: 1,2 - 1,6
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Quantity: 1
• Pressure [bar]: 0.5
• General Information: Oil pressure sensor; 0.5Bar
• Manufacturer: VIKA

• Engine Code: ATN, AUS, AZD
• Pressure [bar]: 16
• Housing Colour: black
• Thread Size: M10x1.0
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: DELPHI
• Name: DE SW90025
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Fabrication Number: ECC-AU-005
• Thread Size: M10x1,0
• Supplementary Article/Info 2: with seal ring
• Number of pins: 1
• Socket colour: black
• Manufacturer: NTY
• Name: NTY ECC-AU-005

• Name: Rongastihend,mootorioli tasemeandur
• Manufacturer: MAX

• Engine Code: ATN/AUS/BCB
• Vehicle Identification Number (VIN) from: 1J-X-250 000
• Switch point from [bar]: 0.3
• Switch point to [bar]: 0.6
• Colour Coding: green
• Number of connectors: 1
• External Thread [mm]: M10X1
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Vehicle Identification Number (VIN) from: 1J-X-250001
• Connector Shape: D Shape
• Operating Mode: Hydraulic
• Colour Coding: green
• Thread Size: M 10
• Thread Pitch [mm]: 1
• Number of pins: 1
• Control Range [bar]: 0,3 - 0,6
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: AZD
• Switch point from [bar]: 1.2
• Switch point to [bar]: 1.6
• External Thread Size: M10 x 1
• Number of connectors: 1
• Colour: black
• Weight [kg]: 0.031
• Supplementary Article/Info 2: with seal ring
• Name: OLISURVELšLITUS
• Manufacturer: FEB
• Additional information: F18904
• Lisainfo: F18904

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fabrication Number: ECC-AU-003
• Thread Size: M10x1
• Spanner Size: 24
• Supplementary Article/Info 2: with seal ring
• Socket colour: green
• Number of pins: 1
• Manufacturer: NTY
• Name: NTY ECC-AU-003

• Corresponds to the original part in colour: black
• Pressure [bar]: 1.4
• Thread Size: M 10 x 1
• for OE number: 06A919081J
• Manufacturer: MEAT & DORIA

• Pressure [bar]: 0.5
• Thread Size: M 10 x 1
• for OE number: 036919081D
• Manufacturer: MEAT&DORIA

• Engine Code: ATN, BCB, AUS
• Vehicle Identification Number (VIN) from: 1J-X-250000
• Thread Size: M10x1
• Spanner Size: 22
• Colour Coding: green
• Number of pins: 1
• Pressure from [bar]: 0.3
• Pressure to [bar]: 0.6
• Name: OLISURVELšLITUS
• Manufacturer: MAX

• Always compare old and new part (in particular OE No.):
• Name: Rongastihend, oli „ravoolukruvi
• Manufacturer: DRM

Brief Information: Always compare old and new part (in particular OE No.)

• Engine Code: AZD
• Switch point from [bar]: 1.2
• Switch point to [bar]: 1.6
• External Thread Size: M10 x 1
• Number of connectors: 1
• Colour: black
• Weight [kg]: 0.031
• Supplementary Article/Info 2: with seal ring
• Name: SW 30 91 8904
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: ATN, AUS, AZD
• Switch Pressure [bar]: 1.4
• Thread Size: M10x1.0
• Sensor Type: Open-style sensor
• Plug Type: Round Plug
• Manufacturer: VERNET

• Number of pins: 1
• Number of circuits: 1
• Plug Type: Female
• Cable insulation material: Silicone
• Material: CuSn (copper-tin)
• Cable Length [mm]: 300
• Cable cross-section from [mm²]: 0.75
• Cable cross-section to [mm²]: 0.75
• Manufacturer: 3RG

• Engine Code: AZD, AZD/BCB
• Colour: green
• Pressure to [bar]: 0.6
• Pressure from [bar]: 0.3
• Pressure [bar]: 0.5
• Thread Size: M10x1
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Engine Code: AZD, AZD/BCB
• Colour: green
• Pressure to [bar]: 0.6
• Pressure from [bar]: 0.3
• Pressure [bar]: 0.5
• Thread Size: M10x1
• Spanner Size: 24
• Manufacturer: FACET
• Additional information: FAC7.0139
• Lisainfo: FAC7.0139

• Vehicle Identification Number (VIN) from: 1J-X-250001
• for engine number: AZD/BCB
• Pressure [bar]: 6
• Housing Colour: green
• Thread Size: M10x1.0
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: DLP
• Lisainfo: SW90024
• Additional information: SW90024

• Engine Code: AZD
• Thread Size: M10x1,0
• Control Range [bar]: 1,2 - 1,6
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AZD, BCB
• Switch Pressure [bar]: 0.5
• Thread Size: M10x1.0
• Sensor Type: Open-style sensor
• Manufacturer: VERNET

• Pressure [bar]: 1.4
• Thread Size: M10 x 1
• Number of pins: 1
• Technical Information Number: circuit N.O.
• Manufacturer: ERA

• Thread Size: M10 x 1
• Spanner Size: 24
• Number of pins: 1
• Supplementary Article/Info 2: with seal ring
• Pressure [bar]: 0.45
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Control Range [bar]: 1.2/1.6BAR
• Colour: black
• General Information: Oil pressure sensor; 1 pin; black; 1.2-1.6 BAR
• Manufacturer: BORSEHUNG

• Engine Code: AZD
• Thread Size: M 10x1
• Housing Colour: black
• Pressure [bar]: 1.4
• Manufacturer: FAE

• Thread Size: M 10x1
• Housing Colour: green
• Pressure [bar]: 0.5
• Manufacturer: FAE ELEKTRYKA

• Model Year from: 2004
• Model Year to: 2005
• Vehicle Identification Number (VIN) from: 1K-4-000 001
• Pressure from [bar]: 0.3
• Pressure to [bar]: 0.6
• Combi Switch Function: Normally Open Contact
• Colour: green
• Spanner Size: 24
• Thread Size: M10 x 1,0
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: MEY
• Lisainfo: 1148200001
• Additional information: 1148200001

• Pressure [bar]: 0.5
• Thread Size: M10 x 1
• Number of pins: 1
• Technical Information Number: circuit N.O.
• Manufacturer: ERA

• Engine Code: AZD, BCB
• Tightening torque from [Nm]: 20
• Voltage [V]: 12
• Combi Switch Function: Normally Open Contact
• Current Strength [A]: 0.15
• Tolerance [%]: 15
• Thread Size: M10x1
• Spanner Size: 24
• Pressure from [bar]: 0.3
• Pressure to [bar]: 0.6
• Number of pins: 1
• Corresponds to the original part in colour: green
• Assy./disassy. by qualified personnel required!:
• Name: Olisurvellitus
• Manufacturer: HEL

• Quantity: 1
• General Information: Oil pressure sensor
• Manufacturer: BORSEHUNG

• Engine Code: ATN, ATN/AUS/AZD
• Colour: black
• Pressure to [bar]: 1.6
• Pressure from [bar]: 1.2
• Pressure [bar]: 1.4
• Thread Size: M10x1
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Engine Code: ATN, AUS, AZD
• Tightening torque from [Nm]: 20
• Voltage [V]: 12
• Combi Switch Function: Normally Open Contact
• Current Strength [A]: 0.15
• Tolerance [%]: 15
• Thread Size: M10x1
• Spanner Size: 24
• Pressure from [bar]: 1.2
• Pressure to [bar]: 1.6
• Number of pins: 1
• Corresponds to the original part in colour: black
• Assy./disassy. by qualified personnel required!:
• Name: Olisurvellitus
• Manufacturer: HEL

• Engine Code: ATN, ATN/AUS/AZD
• Colour: black
• Pressure to [bar]: 1.6
• Pressure from [bar]: 1.2
• Pressure [bar]: 1.4
• Thread Size: M10x1
• Spanner Size: 24
• Manufacturer: FACET

• Engine Code: ATN, BCB, AUS
• Vehicle Identification Number (VIN) from: ******1J*X*250000
• Switch point from [bar]: 0.3
• Switch point to [bar]: 0.6
• External Thread Size: M10 x 1
• Spanner Size: 22
• Number of connectors: 1
• Colour Coding: green
• Weight [kg]: 0.031
• Supplementary Article/Info 2: with seal ring
• Name: OLISURVELšLITUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fabrication Number: ECC-AU-001
• Thread Size: M10x1
• Number of pins: 2
• Socket colour: grey
• Supplementary Article/Info 2: with seal ring
• Spanner Size: 22
• Connector Shape: oval
• Manufacturer: NTY
• Name: NTY ECC-AU-001

• Engine Code: AZD/BCB
• Thread Size: M 10 x 1
• Control Range [bar]: 0,3-0,6
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Weight [kg]: 0.02
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Name: CE 53SKV220
• Manufacturer: ESEN SKV

• Vehicle Equipment: for vehicles with power steering
• Connector Shape: D Shape
• Thread Size: M 10
• Number of pins: 2
• Colour Coding: grey
• Supplementary Article/Info 2: with seal ring
• Name: Olisurvellitus
• Manufacturer: MAX

• Vehicle Equipment: for vehicles with power steering
• Guarantee: 3 years guarantee
• Weight [kg]: 0.06
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN

• Vehicle Equipment: for vehicles with power steering
• Connector Shape: D Shape
• Operating Mode: Hydraulic
• Colour Coding: grey
• Thread Size: M 10
• Thread Pitch [mm]: 1
• Number of pins: 2
• Control Range [bar]: 0,28 - 0,40
• Supplementary Article/Info 2: with seal ring
• Name: OLISURVELšLITUS
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Housing Type: Aluminium Housing
• Height [mm]: 82
• Supplementary Article/Supplementary Info: with gasket/seal
• Fitting Depth [mm]: 54
• Fabrication Number: EPO-AU-000
• Manufacturer: NTY
• Name: NTY EPO-AU-000

• Vehicle Equipment: for vehicles with power steering
• Block Separation:
• Model Year to: 2001
• Vehicle Identification Number (VIN) from: 1J-W-000 001
• Pressure from [bar]: 0.28
• Pressure to [bar]: 0.4
• Combi Switch Function: Normally Open Contact
• Colour: grey
• Spanner Size: 22
• Thread Size: M10 x 1,0
• Number of pins: 2
• Name: OLISURVELšLITUS
• Manufacturer: MEY

• Housing Colour: black
• Vehicle Identification Number (VIN) from: 1J-X-183 710
• Observe technical data:
• Manufacturer Restriction: VAG
• Socket Width [mm]: 1.5
• Number of pins: 1
• Cable Length [mm]: 500
• Cable Cross Section [mm²]: 0.5
• Contact surface: Tin-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabliparanduskomplekt, olisurvelliti
• Manufacturer: HBE

• Vehicle Identification Number (VIN) from: ******1J*Y*000001
• Housing Colour: grey
• Length [mm]: 67
• External Thread Size: M10 x 1
• Spanner Size: 22
• Number of connectors: 2
• Shifting Points [bar]: 0.3
• Weight [kg]: 0.055
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: ******1J*Y*000001
• Length [mm]: 67
• Housing Colour: grey
• External Thread Size: M10 x 1
• Spanner Size: 22
• Number of connectors: 2
• Shifting Points [bar]: 0.3
• Weight [kg]: 0.055
• Name: SW 33 10 4569
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• for OE number: 1J0907660B
• Assy./disassy. by qualified personnel required!:
• Name: AB 120-06-011
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: AZD, ATN, AUS
• Construction Year to: 04.2001
• Thread Size: M10 x 1
• Number of pins: 2
• Pressure to [bar]: 0.4
• Pressure [bar]: 0.28
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Quantity: 1
• Control Range [bar]: 28/40BAR
• General Information: Oil pressure sensor; 28/40 BAR
• Manufacturer: BORSEHUNG

• Pressure [bar]: 0.35
• Thread Size: M10 x 1
• Number of pins: 2
• Technical Information Number: circuit N.O.
• Manufacturer: ERA

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.14
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV202
• Manufacturer: ESEN SKV

• Number of pins: 3
• Name: ANDUR,MOOTORIOLITASE
• Manufacturer: MAX
• Lisainfo: 1J0907660B
• Additional information: 1J0907660B

• Fitting Position: Oil Sump
• Number of pins: 3
• Connector Shape: D Shape
• Supplementary Article/Info 2: with seal ring
• Number of mounting bores: 3
• Housing Type: Aluminium Housing
• Housing material: Plastic, Polyamid 6.6
• Housing Colour: black
• for OE number: 1 119 169, 1J0 907 660B
• Observe system fill quantity:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) from: 1J-3-000 001
• Manufacturer Restriction: VAG
• Number of pins: 3
• Cable Length [mm]: 200
• Socket Width [mm]: 1.5
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Contact surface: gold-plated
• Cable Cross Section [mm²]: 0.75
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, rattap””rete andur
• Manufacturer: HBE

• Model Year to: 2001
• Vehicle Identification Number (VIN) from: 1J-W-000 001
• Length [mm]: 22
• Height [mm]: 61
• Thread Size: M10 x 1
• Control Range [bar]: 0,28 - 0,40
• Vehicle Equipment: for vehicles with power steering
• Number of pins: 2
• Manufacturer: VIEROL

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity: 1
• Weight [kg]: 0.1
• Number of connectors: 3
• Supplementary Article/Info 2: with seal ring
• General Information: Oil level sensor
• Manufacturer: VIKA

• Number of pins: 3
• Manufacturer: YSPARTS

Manufacturer: DELLO AUTOMEGA

• Number of pins: 3
• Connector Shape: D Shape
• Number of mounting bores: 3
• Height [mm]: 83
• Fitting Depth [mm]: 52
• for OE number: 1J0907660B
• Name: Andur,Mootoriolitase
• Manufacturer: MD

• for manufacturer number: 1040015
• Manufacturer: KAMOKA

• Required quantity: 1
• Number of pins: 3
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• for OE number: 1J0 907 660
• Manufacturer: TRUCKTEC

• Operating voltage [V]: 12
• Sensor Type: Active sensor
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Manufacturer: JP GROUP
• Lisainfo: Oil level sensor
• Additional information: Oil level sensor

• Version: IAM
• Manufacturer: METZGER

• Alternatively:
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: ATN
• Manufacturer Restriction: HELLA
• Pikkus, mõõteandur [mm]: 63,7
• Manufacturer: FACET

• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,MOOTORIOLITASE
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: ATN
• Manufacturer Restriction: HELLA
• Sensor Length [mm]: 63.7
• Manufacturer: EPS

• Number of connectors: 3
• Weight [kg]: 0.1
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.