Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Material: Plastic
-
Manufacturer: JP GROUP A/
S - Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Thickness [mm]: 3.5
- Inner Diameter [mm]: 19.5
-
Material: NBR
(nitrile butadiene rubber) - Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Manufacturer: JP GROUP
- Lisainfo: Quick coupling piece
- Additional information: Quick coupling piece
- Quantity per packing unit: 100
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Material: NBR
(nitrile butadiene rubber) - Weight [kg]: 0.003
- Thickness [mm]: 3.5
- Inner Diameter [mm]: 19.5
- Required quantity: 1
- General Information: O ring
- Manufacturer: VIKA
- Material: Plastic
- for OE number: 032121142
- Manufacturer: DELLO AUTOMEGA
-
Vehicle Identification Number (VIN) from: 1J-
6- 000 001, 1J- Y- 000 001, 1J- 4- 000 001 -
Vehicle Identification Number (VIN) to: 1J-
X- 800 000 - Diameter [mm]: 20
- Manufacturer: DELLO AUTOMEGA
- Thickness [mm]: 3.5
- Inner Diameter [mm]: 19.5
-
Material: NBR
(nitrile butadiene rubber) - Weight [kg]: 0.003
-
Name: TIHEND,
JAHUTUSVEDEDELIKUFLANTS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Plastic
- Name: STOPPER
- Manufacturer: MAX
- Material: Plastic
- Weight [kg]: 0.015
-
Name: KINNITUSVEDRU,
JAHUTUSVEDELIKUFLANTS- SULGURKORK - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: AUE,
AQP - Material: Rubber
- Weight [kg]: 0.003
-
Name: TIHEND,
JAHUTUSVEDEDELIKUFLANTS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Width [mm]: 32
- Thickness [mm]: 1.98
- Material: Steel
- Weight [kg]: 0.001
-
Name: KINNITUSVEDRU,
JAHUTUSVEDELIKUFLANTS- SULGURKORK - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Cylinder Head
- Quantity per packing unit: 25
- Inner Diameter [mm]: 50
- Outer Diameter [mm]: 56.3
- Thickness [mm]: 3.15
-
Shape: O-
Ring - Manufacturer: ELRING
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Thickness [mm]: 3.15
- Inner Diameter [mm]: 36
- Material: Rubber
- Weight [kg]: 0.003
-
Name: TIHEND,
JAHUTUSVEDEDELIKUFLANTS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 1J0 122 291 D
- Name: Jahutusvedeliku flants
- Manufacturer: MAX
-
Supplementary Article/Supplementary Info: with gasket/
seal - Supplementary Article/Info 2: with clip
- for OE number: 1J0 122 291D
- Consult accessories list for recommended additional repairs:
- Number of inlets/outlets: 2
-
Material: GRP
(Glass fibre Reinforced Plastic) - Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- for manufacturer number: 7920082
- Manufacturer: KAMOKA
- Material: Plastic
- Manufacturer: DELLO AUTOMEGA
- Weight [kg]: 0.031
- Inner Diameter [mm]: 15
- Outer Diameter [mm]: 20
- General Information: Coolant flange
- Manufacturer: VIKA
- for manufacturer number: 7920123
- Manufacturer: KAMOKA
-
Supplementary Article/Supplementary Info: with gasket/
seal - Material: Plastic
- Number of inlets/outlets: 2
- Manufacturer: JP GROUP
-
Supplementary Article/Supplementary Info: with gasket/
seal -
Material: GRP
(Glass fibre Reinforced Plastic) - for OE number: 3B0 122 291B
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MAX
-
Supplementary Article/Supplementary Info: with gasket/
seal - Supplementary Article/Info 2: with clip
- for OE number: 3B0 122 291B
- Consult accessories list for recommended additional repairs:
- Number of inlets/outlets: 2
-
Material: GRP
(Glass fibre Reinforced Plastic) - Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Housing material: Plastic
- for OE number: 7M3122291
- Manufacturer: DELLO AUTOMEGA
- General Information: Coolant flange
- Manufacturer: VIKA
- for OE number: 1J0122291D
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [g]: 30
- Supplementary Article/Info 2: without thermostat
- Name: IM 90569
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- Construction Year to: 06.2005
- Supplementary Article/Info 2: without thermostat
- Weight [g]: 27
- Material: Plastic
- for OE number: 1J0122291D
- Packaging length [cm]: 7.5
- Packaging width [cm]: 7.5
- Packaging height [cm]: 8.3
- Manufacturer: MOTORAD
- OE-numbri jaoks: 1J0122291D
- Manufacturer: NRF
- for manufacturer number: 7920169
- Manufacturer: KAMOKA
-
Supplementary Article/Supplementary Info: with gasket/
seal - Supplementary Article/Info 2: with clip
-
for OE number: 7M3 122 291,
3B0 122 291C - Consult accessories list for recommended additional repairs:
- Number of inlets/outlets: 2
-
Material: GRP
(Glass fibre Reinforced Plastic) - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- for manufacturer number: 7920105
- Manufacturer: KAMOKA
- Weight [kg]: 0.064
- General Information: Coolant flange
- Manufacturer: VIKA
- Material: Plastic
-
Supplementary Article/Supplementary Info: with gasket/
seal - Name: Jahutusvedeliku flants
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- General Information: Coolant flange
- Manufacturer: VIKA
- Inner Diameter [mm]: 15
- Outer Diameter [mm]: 20
- Weight [kg]: 0.031
- for OE number: 1J0 122 291 D
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Thermostat
-
Name: KRàCIEC UKADU CHODZENIA VW GOLF 2.8 98-
- Manufacturer: NRF
- Inner Diameter [mm]: 15
- Outer Diameter [mm]: 20
- Weight [kg]: 0.03
- for OE number: 1J0 122 291 D
- Name: SW 30 94 5980
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 59.2
- Weight [kg]: 0.025
- Inner Diameter [mm]: 29
- Manufacturer: METALCAUCHO
- Construction Year to: 06.2005
- Weight [g]: 26
- Material: Plastic
- for OE number: 3B0122291B
- Packaging length [cm]: 7.5
- Packaging width [cm]: 7.5
- Packaging height [cm]: 8.3
- Manufacturer: MOTORAD
- Construction Year to: 06.2005
- Weight [g]: 41
- Material: Plastic
- for OE number: 3B0122291C
- Colour: black
- Packaging length [cm]: 7.5
- Packaging width [cm]: 7.5
- Packaging height [cm]: 8.3
- Manufacturer: MOTORAD
- Fitting Position: Cylinder Head
- Thickness [mm]: 5
- Width [mm]: 56
- Length [mm]: 56
-
Name: Tihend,
jahutusvededelikuflants - Manufacturer: AJU
- Engine Code: AQP
- Construction Year to: 06.2005
- Manufacturer: FACET
- Diameter 1 [mm]: 20
- Diameter 2 [mm]: 36
- for OE number: 3B0122291B
- Manufacturer: MEAT & DORIA
-
Fitting Position: Cylinder Head,
face side - Manufacturer: ELRING
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- for OE number: 3B0122291B
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [g]: 29
- Supplementary Article/Info 2: without thermostat
- Name: IM 90582
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- for OE number: 6A121133D
- Material: Plastic
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [g]: 126
- Supplementary Article/Info 2: without thermostat
- Name: IM 90302
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- Engine Code: BDE
- Fitting Position: Lower Left
- Weight [kg]: 0.064
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: AQP
- Name: EP 1.660.022
- Manufacturer: EPS
- Engine Code: AQP
- Manufacturer: FACET
- Length [mm]: 59.2
- Inner Diameter [mm]: 29
- Weight [kg]: 0.025
- Supplementary Article/Supplementary Info: with quick coupling
- for OE number: 3B0 122 291 B
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Plastic
- Opening Temperature [°F]: 82
- Fitting Position: Front
- Manufacturer: 3RG
- Length [mm]: 59.2
- Inner Diameter [mm]: 29
- Weight [kg]: 0.025
- Supplementary Article/Supplementary Info: with quick coupling
- for OE number: 3B0 122 291 B
- Name: SW 30 10 3334
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 3B0 122 291 B
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Supplementary Article/Supplementary Info: with gasket/
seal - Supplementary Article/Info 2: without sensor
- Manufacturer: DELLO AUTOMEGA
-
Supplementary Article/Supplementary Info: with gasket/
seal - Fitting Position: Cylinder Head
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: VER
- Fitting Position: transmission sided
- Weight [kg]: 0.36
-
Supplementary Article/Supplementary Info: with gasket/
seal - Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: transmission sided
- Weight [kg]: 0.36
-
Supplementary Article/Supplementary Info: with gasket/
seal - Name: SW 30 10 5783
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Opening Temperature [°C]: 105
- Number of sensors: 1
- Weight [kg]: 0.2
-
Supplementary Article/Supplementary Info: with gasket/
seal - Number of pins: 1
- Weight [g]: 200
- Supplementary Article/Info 2: with thermostat
- Manufacturer: METALCAUCHO
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks