Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Material: Plastic
-
Manufacturer: JP GROUP A/
S - Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Thickness [mm]: 3.5
- Inner Diameter [mm]: 19.5
-
Material: NBR
(nitrile butadiene rubber) - Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Quantity per packing unit: 100
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Material: NBR
(nitrile butadiene rubber) - Weight [kg]: 0.003
- Thickness [mm]: 3.5
- Inner Diameter [mm]: 19.5
- Required quantity: 1
- General Information: O ring
- Manufacturer: VIKA
- Material: Plastic
- for OE number: 032121142
- Manufacturer: DELLO AUTOMEGA
-
Vehicle Identification Number (VIN) from: 1J-
Y- 000 001 -
Vehicle Identification Number (VIN) to: 1J-
X- 800 000 - Diameter [mm]: 20
- Manufacturer: DELLO AUTOMEGA
- Thickness [mm]: 3.5
- Inner Diameter [mm]: 19.5
-
Material: NBR
(nitrile butadiene rubber) - Weight [kg]: 0.003
-
Name: TIHEND,
JAHUTUSVEDEDELIKUFLANTS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Plastic
- Name: STOPPER
- Manufacturer: MAX
- Material: Plastic
- Weight [kg]: 0.015
-
Name: KINNITUSVEDRU,
JAHUTUSVEDELIKUFLANTS- SULGURKORK - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Width [mm]: 32
- Thickness [mm]: 1.98
- Material: Steel
- Weight [kg]: 0.001
-
Name: KINNITUSVEDRU,
JAHUTUSVEDELIKUFLANTS- SULGURKORK - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Supplementary Article/Supplementary Info: with accessories
-
Name: SULGURKORK,
JAHUTUSVEDELIKUFLANTS - Manufacturer: MAX
- Fitting Position: Cylinder Head
- Quantity per packing unit: 25
- Inner Diameter [mm]: 50
- Outer Diameter [mm]: 56.3
- Thickness [mm]: 3.15
-
Shape: O-
Ring - Manufacturer: ELRING
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Forward- /Backflow: for foreflow
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Transmission Type: Automatic Transmission
-
Vehicle Identification Number (VIN) to: 1J-
X- 800 000 - Number of flange connections: 4
- Manufacturer: DELLO AUTOMEGA
- Housing material: Plastic
- for OE number: 1J0122291
- Manufacturer: DELLO AUTOMEGA
- Transmission Type: Manual Transmission
-
Vehicle Identification Number (VIN) to: 1J-
X- 800000 - Number of inlets/outlets: 3
-
Material: GRP
(Glass fibre Reinforced Plastic) -
for pipe diameter [mm]: 32,
8 - for OE number: 1J0 121 087B
- Consult accessories list for recommended additional repairs:
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Thickness [mm]: 3.15
- Inner Diameter [mm]: 36
- Material: Rubber
- Weight [kg]: 0.003
-
Name: TIHEND,
JAHUTUSVEDEDELIKUFLANTS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Manufacturer: JP GROUP A/S
- for manufacturer number: 7920034
- Manufacturer: KAMOKA
- for manufacturer number: 7920038
- Manufacturer: KAMOKA
-
Vehicle Identification Number (VIN) to: 1J-
X- 800000 -
Supplementary Article/Supplementary Info: with gasket/
seal - Supplementary Article/Info 2: with clip
- for OE number: 1J0 122 291
- Consult accessories list for recommended additional repairs:
- Number of inlets/outlets: 2
-
Material: GRP
(Glass fibre Reinforced Plastic) - Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- for manufacturer number: 7920044
- Manufacturer: KAMOKA
- Weight [kg]: 0.051
- Required quantity: 1
- General Information: Coolant flange
- Manufacturer: VIKA
-
Material: GRP
(Glass fibre Reinforced Plastic) - Number of inlets/outlets: 3
- General Information: Coolant flange
- Manufacturer: VIKA
- for OE number: 1J0121087B
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [g]: 45
- Supplementary Article/Info 2: without thermostat
- Name: IM 90305
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
-
Material: GRP
(Glass fibre Reinforced Plastic) - Number of inlets/outlets: 4
- General Information: Coolant flange
- Manufacturer: VIKA
- Transmission Type: Manual Transmission
-
Vehicle Identification Number (VIN) to: 1J-
X- 800000 -
Material: GRP
(Glass fibre Reinforced Plastic) - for OE number: 1J0 121 087B
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MAX
-
Supplementary Article/Supplementary Info: with gasket/
seal - Material: Plastic
- Number of inlets/outlets: 2
- Manufacturer: JP GROUP
- Fitting Position: Lower
- Manufacturer: JP GROUP
- Lisainfo: Quick coupling piece
- Additional information: Quick coupling piece
- for manufacturer number: 7920091
- Manufacturer: KAMOKA
-
Fitting Position: Lower,
Radiator -
Supplementary Article/Supplementary Info: with gasket/
seal -
Supplementary Article/Info 2: with clip,
with breather valve - for OE number: 6Q0 122 291F
- Consult accessories list for recommended additional repairs:
- Number of inlets/outlets: 2
-
Material: GRP
(Glass fibre Reinforced Plastic) - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Material: Plastic
- Manufacturer: DELLO AUTOMEGA
- Housing material: Plastic
- for OE number: 7M3122291
- Manufacturer: DELLO AUTOMEGA
- General Information: Coolant flange
- Manufacturer: VIKA
- Construction Year to: 02.2001
- Supplementary Article/Info 2: without thermostat
- Weight [g]: 27
- Material: Plastic
- for OE number: 1J0122291D
- Packaging length [cm]: 7.5
- Packaging width [cm]: 7.5
- Packaging height [cm]: 8.3
- Manufacturer: MOTORAD
-
Vehicle Identification Number (VIN) to: 1J-
X- 800000 - Engine Code: AGZ
- Diameter 1 [mm]: 32
- Diameter 2 [mm]: 47
- for OE number: 1J0122291
- Manufacturer: MEAT&DORIA
-
Fitting Position: Radiator,
Upper Left -
Supplementary Article/Supplementary Info: with gasket/
seal - Supplementary Article/Info 2: with clip
-
for OE number: 7M3 122 291,
3B0 122 291C - Consult accessories list for recommended additional repairs:
- Number of inlets/outlets: 2
-
Material: GRP
(Glass fibre Reinforced Plastic) - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- for manufacturer number: 7920105
- Manufacturer: KAMOKA
- Weight [kg]: 0.082
- Fitting Position: Lower
- Required quantity: 1
- General Information: Coolant flange
- Manufacturer: VIKA
- Fitting Position: Lower
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MAX
-
Vehicle Identification Number (VIN) from: 1J-
Y- 000001 - Material: Plastic
-
Supplementary Article/Supplementary Info: with gasket/
seal - Name: Jahutusvedeliku flants
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Vehicle Identification Number (VIN) to: ******1J*X*800000
- Transmission Type: Manual Transmission
- Weight [kg]: 0.047
- for OE number: 1J0 121 087 B
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Lower
-
Fabrication Number: CTM-
VW- 022 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Thermostat
-
Name: KRàCIEC UKADU CHODZENIA VW GOLF 2.8 98-
- Manufacturer: NRF
- Vehicle Identification Number (VIN) to: ******1J*X*800000
- Transmission Type: Manual Transmission
- Weight [kg]: 0.047
- for OE number: 1J0 121 087 B
- Name: SW 33 10 3756
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Behind the radiator,
Upper - Manufacturer: METALCAUCHO
- Additional information: F45045
- Lisainfo: F45045
- Construction Year to: 02.2001
- Weight [g]: 41
- Material: Plastic
- for OE number: 3B0122291C
- Colour: black
- Packaging length [cm]: 7.5
- Packaging width [cm]: 7.5
- Packaging height [cm]: 8.3
- Manufacturer: MOTORAD
- Fitting Position: Cylinder Head
- Thickness [mm]: 5
- Width [mm]: 56
- Length [mm]: 56
-
Name: Tihend,
jahutusvededelikuflants - Manufacturer: AJU
-
Fabrication Number: CTM-
VW- 077 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: AGZ
- Construction Year to: 02.2001
- Manufacturer: FACET
- Diameter 1 [mm]: 20
- Diameter 2 [mm]: 36
- for OE number: 3B0122291B
- Manufacturer: MEAT & DORIA
- for OE number: 1J0121100
- Fitting Position: Lower
-
Supplementary Article/Supplementary Info: without gasket/
seal - Weight [g]: 88
- Supplementary Article/Info 2: without thermostat
- Name: IM 90361
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- Colour: black
- Fitting Position: Lower
- Weight [kg]: 0.082
- Supplementary Article/Supplementary Info: with quick coupling
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 3B0122291B
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [g]: 29
- Supplementary Article/Info 2: without thermostat
- Name: IM 90582
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
-
Installatsiooni pool: radiaatori taga,
üleval - OE-numbri jaoks: 1J0121087B
- Manufacturer: NRF
- Engine Code: AGZ
- Construction Year to: 02.2001
- Manufacturer: FACET
- Colour: black
- Fitting Position: Lower
- Supplementary Article/Supplementary Info: with quick coupling
- Name: SW 30 94 6154
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Behind the radiator,
Upper - Manufacturer: VERNET
- Material: Plastic
- Number of connectors: 4
- Manufacturer: METZGER
- Construction Year to: 02.2001
- Supplementary Article/Info 2: without thermostat
- Weight [g]: 50
- Material: Plastic
- for OE number: 1J0121087C
- Colour: black
- Packaging length [cm]: 9.1
- Packaging width [cm]: 9.1
- Packaging height [cm]: 13.5
- Manufacturer: MOTORAD
-
Installatsiooni pool: Mootoriradiaator,
üleval - OE-numbri jaoks: 1J0121619A
- Manufacturer: NRF
- for OE number: 3B0 122 291 B
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Vehicle Identification Number (VIN) from: ******1J*Y*000001
- Fitting Position: transmission sided
- Weight [kg]: 0.36
-
Supplementary Article/Supplementary Info: with gasket/
seal - Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Vehicle Identification Number (VIN) from: ******1J*Y*000001
- Fitting Position: transmission sided
- Weight [kg]: 0.36
-
Supplementary Article/Supplementary Info: with gasket/
seal - Name: SW 30 10 5783
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Diameter 1 [mm]: 32
- Diameter 2 [mm]: 16
- Diameter 3 [mm]: 32
- Diameter 4 [mm]: 8
- for OE number: 1J0121087C
- Lisainfo: 93131 NIS
- Additional information: 93131 NIS
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks