Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)



- Filtritüüp: Keeratav filter
- Kõrgus (mm): 174
- Välisläbimõõt 1 [mm]: 75
- Välisläbimõõt 2 [mm]: 81
-
Sisend-Ø (mm): 7,
9 -
Väljalase-Ø (mm): 7,
9 - Manufacturer: JP GROUP
- Lisainfo: Fuel filter
- Additional information: Fuel filter



- Fitting Position: Rear Axle
- Brake System: Lucas
- Height [mm]: 53
- Width [mm]: 87
- Thickness [mm]: 15.2
- Wear Warning Contact: not prepared for wear warning indicator
-
Lisainfo: Brake pad set,
rear, 15.2 mm -
Additional information: Brake pad set,
rear, 15.2 mm



-
for PR number: 1LE,
1LJ, 1LN, 1ZD, 1ZE, 1ZH, 1ZR, E54 - Fitting Position: Front Axle
- Brake System: Teves
- Height [mm]: 74.2
- Width [mm]: 156
- Thickness [mm]: 20.6
- Wear Warning Contact: with integrated wear warning contact
- Manufacturer: JP GROUP
-
Lisainfo: Brake pad set,
front, 20.6 mm -
Additional information: Brake pad set,
front, 20.6 mm


-
Filter type: In-
Line Filter - Fuel Mixture Formation: Petrol Injection
- General Information: Petrol fuel filter
- Manufacturer: VIKA





-
Vehicle Identification Number (VIN) from: 1J-
4- 000 001 - Kütusesüsteemi seadmed: Bensiini sissepritse
- Välisläbimõõt 1 [mm]: 75
- Välisläbimõõt 2 [mm]: 81
-
Sisend-Ø (mm): 7,
9 -
Väljalase-Ø (mm): 7,
9 - Kõrgus 1 (mm): 110
- Kõrgus 2 (mm): 174
- Filtritüüp: Ühendusfilter
- Manufacturer: DELLO AUTOMEGA


-
Filter type: Spin-
on Filter - Height [mm]: 174
- Outer Diameter [mm]: 75
- Inlet Ø [mm]: 7.9
- Outlet Ø [mm]: 7.9
- Outer Diameter 1 [mm]: 81
- Name: KTUSEFILTER
- Manufacturer: MAX





- Filtritüüp: Ühendusfilter
- Sisend-Ø (mm): 8
- Väljalase-Ø (mm): 8
- OE-numbri jaoks: 0J1201511A
- Kõrgus (mm): 171
- Kütuseliik: Bensiin
- Välisläbimõõt [mm]: 75
- Manufacturer: KAMOKA


-
Filter type: In-
Line Filter - Height [mm]: 176
- Outer Diameter 1 [mm]: 74
- Outer Diameter 2 [mm]: 80
- Inner Diameter 1 [mm]: 8
- Inner Diameter 2 [mm]: 8
- Manufacturer: DENCKERMANN FILTRY


- Height [mm]: 171
- Outer Diameter [mm]: 75
- Inlet Ø [mm]: 8
- Outlet Ø [mm]: 8
-
Filter type: In-
Line Filter - Name: CFD DFF0204
- Manufacturer: DACO

-
Filter type: Spin-
on Filter - Height [mm]: 172
- Inner Diameter [mm]: 8
- Outer Diameter [mm]: 81
-
Lisainfo:
(kvaliteediklass: PJ) - Name: Fuel filter
- Quality class: PJ
-
Additional information:
(kvaliteediklass: PJ)


- Läbimõõt [mm]: 80
- Filtritüüp: Ühendusfilter
- Kõrgus (mm): 176
- Korpuse materjal: Metall
- Name: KTUSEFILTER
- Manufacturer: MEY


- Outer Diameter [mm]: 75
- Inlet Ø [mm]: 7.9
- Outlet Ø [mm]: 7.9
- Outer Diameter 1 [mm]: 81
- Height [mm]: 179
- Filter type: Filter Insert
- Name: BM FE0394
- Manufacturer: BREMSI



-
Filter type: In-
Line Filter - Length [mm]: 171
- Housing material: Aluminium
- Outer Diameter [mm]: 74
- Pipe Diameter [mm]: 8
- Weight [kg]: 0.24
- Observe service information:
- Manufacturer: BLUEPRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


-
Filter type: Spin-
on Filter - Height [mm]: 172
- Outer Diameter [mm]: 81
- Inlet Ø [mm]: 8
- Outlet Ø [mm]: 8
- Name: KTUSEFILTER
- Manufacturer: ALC



- Filtritüüp: Ühendusfilter
- Korpuse materjal: Alumiinium
- Pikkus (mm): 171
- Välisläbimõõt [mm]: 74
- Toru läbimõõt [mm]: 8
-
Kaal (kg): 0,
25 - Name: KTUSEFILTER
- Manufacturer: FEB
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


















- Läbimõõt [mm]: 83
- Materjal: Plastik
- Filtritüüp: Ühendusfilter
- Kõrgus (mm): 171
- Manufacturer: DELPHI
- Name: DE EFP204


- Height [mm]: 175
- Fuel Type: Petrol
-
Filter type: In-
Line Filter -
Fitted Diameter1/Fitted Diameter2 [mm]: 8 /
8 - Outer Diameter 1 [mm]: 83
- Outer Diameter 2 [mm]: 75
- Manufacturer: DRIVE


- Filtritüüp: Ühendusfilter
- Välisläbimõõt [mm]: 74
- Kõrgus (mm): 175
- Sisend-Ø (mm): 8
- Väljalase-Ø (mm): 8
- Manufacturer: TOPRAN
Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


-
Filter type: In-
Line Filter - Outer Diameter [mm]: 80
- Height [mm]: 173
- Manufacturer: HENGST FILTER



- Construction Year to: 02.2001
- Engine Code: AGZ
- Filtritüüp: Ühendusfilter
- Kõrgus (mm): 175
- Välisläbimõõt [mm]: 83
- Välisläbimõõt 1 [mm]: 75
- Sisend-Ø (mm): 8
- Väljalase-Ø (mm): 8
-
Kaal (kg): 0,
23 - Manufacturer: VALEO
- Name: VA 587022


- Filtritüüp: Ühendusfilter
- Kõrgus (mm): 171
- Välisläbimõõt [mm]: 75
- Sisend-Ø (mm): 8
- Väljalase-Ø (mm): 8
- SVHC: SVHS aineid ei esine
- Manufacturer: FILTRON


-
Filter type: In-
Line Filter - Diameter [mm]: 75
- Height [mm]: 170
- Inlet Ø [mm]: 8
- Outlet Ø [mm]: 7.9
- Packaging height [cm]: 17.2
- Net Weight [g]: 223
- Packaging length [cm]: 8.2
- Packaging width [cm]: 8.2
- Name: KN KL79
- Manufacturer: KNECHT







- Quantity per packing unit: 4
- Installatsiooni pool: Tagasild
- Jämedus/Tugevus (mm): 17
- Laius (mm): 87
-
Kõrgus (mm): 52,
9 - Pidurisüsteem: TRW
- OE-numbri jaoks: 5K0 698 451 E
- Manufacturer: RAP BRAKES


- Construction Year to: 02.2001
-
Filter type: In-
Line Filter - Height [mm]: 171
- Outer Diameter [mm]: 81
- Diameter 3 [mm]: 8
- Diameter 4 [mm]: 8
- Name: Fuel filter
- Quality class: PJ
Lisainfo: "Tootja: COOPERSFIAAM FILTERS
BORA (1J2), 10.98-09
(kvaliteediklass: PJ)"
Additional information: "Tootja: COOPERSFIAAM FILTERS
BORA (1J2), 10.98-09
(kvaliteediklass: PJ)"


-
Filter type: In-
Line Filter - Diameter [mm]: 75
- Height [mm]: 170
- Inlet Ø [mm]: 8
- Outlet Ø [mm]: 7.9
- Packaging height [cm]: 17.2
- Net Weight [g]: 223
- Packaging length [cm]: 8.2
- Packaging width [cm]: 8.2
- Manufacturer: MAHLE KNECHT



-
Filter type: In-
Line Filter - Height [mm]: 169
- Height 1 [mm]: 106
- Outer Diameter [mm]: 74
- Inlet Ø [mm]: 8
- Outlet Ø [mm]: 8
- Packing Type: Carton
- Packaging length [cm]: 8.7
- Packaging width [cm]: 8.7
- Packaging height [cm]: 21
- Name: CH CFF100237
- Manufacturer: CHAMPION


- Construction Year to: 02.2001
- Filtritüüp: Ühendusfilter
- Kõrgus (mm): 171
- Välisläbimõõt [mm]: 81
- Läbimõõt 3 (mm): 8
- Läbimõõt 4 (mm): 8
- Manufacturer: PURFLUX


- Filtritüüp: Filtrer
- Läbimõõt [mm]: 81
- Sisend-Ø (mm): 8
- Väljalase-Ø (mm): 8
- Kõrgus (mm): 175
- OE-numbri jaoks: 0J1201511A
- Manufacturer: MEAT & DORIA


-
Filter type: In-
Line Filter - Diameter [mm]: 81
- Inlet Ø [mm]: 8
- Outlet Ø [mm]: 8
- Height [mm]: 174
- Fuel Type: Petrol
- Fuel Mixture Formation: Petrol Injection
- Diameter 1 [mm]: 75
- Diameter 2 [mm]: 8
- Height 1 [mm]: 110
- General Information: Petrol fuel filter
- Manufacturer: BORSEHUNG


- Filtritüüp: Ühendusfilter
- Läbimõõt [mm]: 75
- Kõrgus (mm): 171
- Sisend-Ø (mm): 8
- Väljalase-Ø (mm): 8
- Manufacturer: PROFIPOWER



-
for PR number: 1KP,
1KT, 1KU, 1KX, 1KY, 2EE, 2EL, E54 - Fitting Position: Rear Axle
- Brake System: Lucas
- Height [mm]: 53
- Width [mm]: 87
- Thickness [mm]: 17.2
- Wear Warning Contact: not prepared for wear warning indicator
-
Lisainfo: Brake pad set,
rear, 17.2 mm
PR:1KD, 1KU -
Additional information: Brake pad set,
rear, 17.2 mm
PR:1KD, 1KU


- Fitting Position: Rear Axle
-
for PR number: 1KE,
1KP, 1KT -
Brake System: Lucas /
TRW - Width 1 [mm]: 87.6
- Height [mm]: 52.9
- Thickness [mm]: 17.2
- for OE number: 1J0698451
- Test Mark: ECE R90
- Wear Warning Contact: excl. wear warning contact
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.


-
EU Product Safety Regulation (GPSR): IEC 60417-
6183 mechanical expertise required -
Filter type: In-
Line Filter - Height [mm]: 174
- Outer Diameter [mm]: 75
- Inlet Ø [mm]: 8
- Outlet Ø [mm]: 8
- Outer Diameter 1 [mm]: 81
- SVHC: No SVHC present!
- Name: KTUSEFILTER
- Manufacturer: MAN


-
Filter type: In-
Line Filter - Outer Diameter 1 [mm]: 74
- Outlet Ø [mm]: 8
- Thread Size: 8 mm
- Height [mm]: 171
- Manufacturer: KOLBENSCHMIDT






























- Construction Year to: 02.2001
- Kütusesüsteemi seadmed: Bensiini sissepritse
- Filtritüüp: Ühendusfilter
-
Läbimõõt [mm]: 74,
9 - Välisläbimõõt 1 [mm]: 82
- Kõrgus (mm): 175
- Sisend-Ø (mm): 8
- Väljalase-Ø (mm): 8
- Name: KTUSEFILTER
- Manufacturer: BOS


-
for PR number: 1KE,
1KP, 1KT - Fitting Position: Rear Axle
- Width [mm]: 87.6
- Thickness [mm]: 17.2
- Height [mm]: 52.9
- Wear Warning Contact: excl. wear warning contact
-
Brake System: Lucas /
TRW - Manufacturer: DENCKERMANN ZAWIESZENIE


- Fitting Position: Rear Axle
-
for PR number: 1KE,
1KP, 1KT - Quantity per packing unit: 4
-
Supplementary Article/Info 2: with bolts/
screws - Thickness [mm]: 17
- Width [mm]: 87
- Height [mm]: 52.9
- Brake System: TRW
- Manufacturer: LPR
- Name: LPR 05P634
- Additional information: 05P634
- Lisainfo: 05P634


- Fitting Position: Rear Axle
-
for PR number: 1KE,
1KP, 1KT - Quantity per packing unit: 4
- Pidurisüsteem: TRW
- Piirangutega toode/piirangu info 2: koos kruvidega
- Jämedus/Tugevus (mm): 17
- Laius (mm): 87
-
Kõrgus (mm): 52,
9 - Name: SAK 5SP634
- Manufacturer: SAMKO


- Fitting Position: Rear Axle
- Width [mm]: 87
- Thickness [mm]: 15
- Height [mm]: 53
- Wear Warning Contact: excl. wear warning contact
-
Brake System: Lucas -
TRW - Manufacturer: KAMOKA UK£ADY HAMULCOWE


- Filtritüüp: Filtrer
- Läbimõõt [mm]: 80
- Sisend-Ø (mm): 8
- Väljalase-Ø (mm): 8
- Kõrgus (mm): 170
- OE-numbri jaoks: 1J0201511A
- Manufacturer: MEAT&DORIA


- Fitting Position: Rear Axle
- Width [mm]: 88
- Thickness [mm]: 17
- Height [mm]: 53
- Wear Warning Contact: excl. wear warning contact
-
Brake System: Lucas -
TRW - Manufacturer: KAMOKA UK£ADY HAMULCOWE





























































- Fitting Position: Rear Axle
- Quantity per packing unit: 4
- Manufacturer Restriction: TRW
- Width [mm]: 87
- Height [mm]: 52.9
- Thickness [mm]: 17
- Wear Warning Contact: not prepared for wear warning indicator
- Brake Lining: With bevelled edges
- Observe technical data:
-
Manufacturer: AUTO-
GH
Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs


-
for PR number: 1KP,
1KT, 1KX, 2EL, 1KU, 2EE, 1KY, E54 - Fitting Position: Rear Axle
- Width [mm]: 87
- Height [mm]: 53
- Thickness [mm]: 17.2
- Wear Warning Contact: not prepared for wear warning indicator
- Brake System: Lucas
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: MAX


-
Brake System: Girling-
Lucas - Fitting Position: Rear Axle
- Quantity per packing unit: 4
-
Test Mark: ECE-
R90 - Height 1 [mm]: 53.1
- Wear Warning Contact: excl. wear warning contact
- Vibration: with vibration damper
- Width 1 [mm]: 87.2
- Thickness 1 [mm]: 17
- Manufacturer: METELLI UKL.HAMULCOWY




-
for PR number: E54,
1KY, 2EE, 1KU, 2EL, 1KX, 1KT, 1KP - Fitting Position: Rear Axle
- Thickness [mm]: 17
- Length [mm]: 87
- Width [mm]: 53
- Brake System: TRW Lucas
- WVA Number: 20961
- for OE number: 4D0698451C
-
Manufacturer: ASHIKA-
KLOCKI


-
for PR number: 1KE,
1KY, 1KK, 1KP, 1KS, 1KT - Fitting Position: Rear Axle
- Wear Warning Contact: not prepared for wear warning indicator
- Thickness 1 [mm]: 17.2
- Number of pads: 4
- Supplementary Article/Supplementary Info: with accessories
- Test Mark: ECE R90 APPROVED
- Supplementary Article/Info 2: with mounting manual
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


- Width [mm]: 87
- Height [mm]: 53
- Thickness [mm]: 17.2
- Wear Warning Contact: incl. wear warning contact
- Number of wear indicators [per axle]: 1
- Brake System: Lucas
- Fitting Position: Rear Axle
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: MAX



- Quantity per packing unit: 4
- Installatsiooni pool: Tagasild
-
Kõrgus (mm): 52,
8 - Jämedus/Tugevus (mm): 17
- Piduriklots: Lõigatud servaga
-
Laius (mm): 87,
1 - Pidurisüsteem: Lucas
- Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
- täidab ECE-normi: ECE R90
- EG/ECE - kõlblik:
- WVA-number: 20961
- Piirangutega toode/piirangu info 2: ilma kruvideta
- Piirangutega toode/piirangu info: distantsseibidega
- Manufacturer: VASCO BREYKO





























































- Fitting Position: Rear Axle
- Quantity per packing unit: 4
- Manufacturer Restriction: TRW
- Width [mm]: 87
- Height [mm]: 52.9
- Thickness [mm]: 17
- Wear Warning Contact: not prepared for wear warning indicator
- Supplementary Article/Supplementary Info: with accessories
- Supplementary Article/Info 2: with brake caliper screws
- Brake Lining: With bevelled edges
- Observe technical data:
-
Manufacturer: AUTO-
GH
Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs




-
for PR number: 1KP,
1KT, 1KU, 1KX, 1KY, 2EE, 2EL, E54 - Quantity per packing unit: 4
- Installatsiooni pool: Tagasild
- Jämedus/Tugevus (mm): 17
- Laius (mm): 87
-
Kõrgus (mm): 52,
9 - Pidurisüsteem: TRW
- Piirangutega toode/piirangu info 2: koos pidurisadula kruvidega
-
Kaal (kg): 0,
77 - Manufacturer: TOMEX


- Fitting Position: Rear Axle
- Width [mm]: 87
- Thickness [mm]: 17.2
- Height [mm]: 52.6
-
Material: Semi-
Metallic - Wear Warning Contact: excl. wear warning contact
- Supplementary Article/Supplementary Info: with spring
- Supplementary Article/Info 2: without bolts
- General Information: Brake pad; rear; without wire
- Manufacturer: VIKA



- Engine Code: AGZ
- Kõrgus (mm): 171
- Kütuseliik: Bensiin
- Filtritüüp: Ühendusfilter
- Väliskeere [mm]: 8
- Välisläbimõõt [mm]: 75
- Manufacturer: MAGNETI MARELLI


- Fitting Position: Rear Axle
- Construction Year to: 12.2000
- Wear Warning Contact: without integrated wear sensor
- Height 1 [mm]: 52.9
- Brake System: TRW
- Width 1 [mm]: 87
- Thickness 1 [mm]: 16.4
- Manufacturer: PROFIPOWER




- Fitting Position: Rear Axle
- Brake System: TRW
- Width [mm]: 87
- Height [mm]: 52.9
- Thickness [mm]: 17
- Wear Warning Contact: without integrated wear sensor
-
Supplementary Article/Info 2: with anti-
squeak plate -
Test Mark: ECE-
R90 - WVA Number: 20960
- Weight [kg]: 0.87
- Name: VA 301463
- Manufacturer: VALEO


-
for brake disc diameter [mm]: 232,
230 -
for PR number: 1KP,
1KT, 1KX - Block Separation:
- Length [mm]: 87
- Width [mm]: 52.9
- Test Mark: ECE R90 Approved
-
Supplementary Article/Info 2: with anti-
squeak plate - Fitting Position: Rear Axle
- Thickness 1 [mm]: 16.8
- Weight [kg]: 0.916
- Observe service information:
- Manufacturer: FEBI BILSTEIN
- Lisainfo: 16488 FEBI
- Additional information: 16488 FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.



-
for PR number: 1KP,
1KT - Fitting Position: Rear Axle
- Width [mm]: 87.1
- Height [mm]: 52.8
- Thickness [mm]: 17.2
- Wear Warning Contact: not prepared for wear warning indicator
- Brake System: TRW
- Supplementary Article/Supplementary Info: with accessories
- Supplementary Article/Info 2: with brake caliper screws
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: MEY
- Lisainfo: 0252096117
- Additional information: 0252096117
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.


- Fitting Position: Rear Axle
- for brake disc diameter [mm]: 230
-
for PR number: 1KP,
1LT, 1KX - Width 1 [mm]: 87
- Height 1 [mm]: 52.9
- Thickness 1 [mm]: 15
-
Brake System: LUCAS/
TRW - Wear Warning Contact: without integrated wear sensor
- Weight [kg]: 0.86
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: ABS



- Fitting Position: Rear Axle
-
for PR number: 1KY,
1KT, 1KU, 1KX, E54, 2EE, 2EL, 1KP - Quantity per packing unit: 4
- Width [mm]: 87
- Thickness [mm]: 17
- Height [mm]: 53
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article/Supplementary Info: with accessories
- Brake System: Lucas
-
Supplementary Article/Info 2: with brake caliper screws,
with anti- squeak plate -
WVA Number: 20961,
23554 - Manufacturer: BREMBO
- Name: BR P 85 020


-
for brake disc diameter [mm]: 232,
230 -
for PR number: 1KP,
1KT, 1KX - Block Separation:
- Length [mm]: 87
- Width [mm]: 53
- Test Mark: ECE R90 Approved
-
Supplementary Article/Info 2: with anti-
squeak plate - Fitting Position: Rear Axle
- Thickness 1 [mm]: 17
- Weight [kg]: 0.916
- Observe service information:
- Manufacturer: BLUEPRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.




-
for PR number: E54,
1KY, 2EE, 1KU, 2EL, 1KX, 1KT, 1KP - Fitting Position: Rear Axle
- Thickness [mm]: 17
- Length [mm]: 87
- Width [mm]: 53
- Brake System: TRW Lucas
- WVA Number: 20961
- for OE number: 4D0698451C
- Manufacturer: JAPKO



- Quantity per packing unit: 4
- Installatsiooni pool: Tagasild
-
Kõrgus (mm): 52,
8 - Klambrite arv: 4
- Jämedus/Tugevus (mm): 17
- Piduriklots: Lõigatud servaga
-
Laius (mm): 87,
1 - Pidurisüsteem: Lucas
- Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
- täidab ECE-normi: ECE R90
- EG/ECE - kõlblik:
- WVA-number: 20961
- Piirangutega toode/piirangu info 2: koos kruvidega
- Piirangutega toode/piirangu info: distantsseibidega
- Manufacturer: VASCO BREYKO


- Fitting Position: Rear Axle
-
for PR number: 1KP,
1KT, 1KX, 2EL, 1KU, 2EE, 1KY, E54 - Width [mm]: 87
- Height [mm]: 53
- Thickness [mm]: 17.2
- Wear Warning Contact: not prepared for wear warning indicator
- Brake System: Lucas
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: QUARO


- Fitting Position: Front Axle
-
for PR number: 1ZD,
1ZE -
Vehicle Identification Number (VIN) from: 1J-
Y- 000001 - Brake System: ATE
- Number of wear indicators [per axle]: 1
- Width 1 [mm]: 156.3
- Height [mm]: 74
- Thickness [mm]: 19.8
- Thickness 2 [mm]: 20.3
- Warning Contact Length [mm]: 145
- Test Mark: ECE R90
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.







































- Fitting Position: Rear Axle
- Quantity per packing unit: 4
-
FMSI Code: D1017-
7920 D1112- 821 -
Test Mark: E1 90R-
01878/ 507 - Brake System: TRW
-
Supplementary Article/Info 2: without anti-
squeak plate - Supplementary Article/Supplementary Info: with accessories
- WVA Number: 20960
-
Friction Lining Material: Low-
Metallic - Wear Warning Contact: not prepared for wear warning indicator
- Width 1 [mm]: 87.2
- Width 2 [mm]: 87
- Height 1 [mm]: 53
- Height 2 [mm]: 53
- Thickness 1 [mm]: 17
- Thickness 2 [mm]: 17
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE LP565
- Additional information: LP565 DELPHI
- Lisainfo: LP565 DELPHI


- Fitting Position: Front Axle
- Width [mm]: 156
- Thickness [mm]: 20
- Height [mm]: 74
- Number of wear indicators [per axle]: 1
- Wear Warning Contact: incl. wear warning contact
- Brake System: ATE
- Warning Contact Length [mm]: 145
- Manufacturer: KAMOKA


- Fitting Position: Rear Axle
-
Rim Size [inch]: 15.0,
16.0 - Braking/Driving Dynamics: for vehicles with ABS
- Width 1 [mm]: 87
- Height 1 [mm]: 52.9
- Thickness 1 [mm]: 16.4
-
Brake System: LUCAS/
TRW - Wear Warning Contact: without integrated wear sensor
- Weight [kg]: 0.96
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: ABS


- Fitting Position: Rear Axle
- Width [mm]: 87
- Thickness [mm]: 17.2
- Height [mm]: 52.6
-
Material: Semi-
Metallic - Wear Warning Contact: excl. wear warning contact
- Supplementary Article/Supplementary Info: with spring
- Supplementary Article/Info 2: without bolts
- General Information: Brake pad; rear; without wire
- Manufacturer: VIKA



-
for PR number: 1ZR,
1LJ, E54, 1LN, 1ZH, 1LE, 1ZE, 1ZD - Height [mm]: 74
- Thickness [mm]: 20.8
- Wear Warning Contact: excl. wear warning contact
- Brake System: Teves
-
Article number of recommended accessories: 27-
0732 - Fitting Position: Front Axle
- Width [mm]: 156
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: MAX


- Fitting Position: Rear Axle
- Jämedus/Tugevus (mm): 16
-
Pikkus (mm): 87,
2 -
Kõrgus (mm): 53,
2 - Pidurisüsteem: TRW
- Piduri-/sõidudün.tooteseos: ABS jaoks
- Manufacturer: DRIVE



-
for PR number: 1ZR,
1LJ, E54, 1LN, 1ZH, 1LE, 1ZE, 1ZD - Height [mm]: 74
- Thickness [mm]: 20.8
- Wear Warning Contact: with integrated wear sensor
- Number of wear indicators [per axle]: 1
- directional:
- Brake System: Teves
-
Article number of recommended accessories: 27-
0732 - Fitting Position: Front Axle
- Width [mm]: 156
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: MAX









- Fitting Position: Rear Axle
- Quantity per packing unit: 4
- Manufacturer Restriction: TRW
- Width [mm]: 87
- Height [mm]: 52.9
- Thickness [mm]: 17
- Wear Warning Contact: not prepared for wear warning indicator
- Supplementary Article/Supplementary Info: with accessories
- Supplementary Article/Info 2: with brake caliper screws
- Brake Lining: With bevelled edges
-
Test Mark: E9 90R -
01120/ 457 - Observe technical data:
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: TRW
- Lisainfo: GDB1330
- Additional information: GDB1330
Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs SVHC: No information available, please contact the manufacturer!




- Fitting Position: Rear Axle
- for brake disc diameter [mm]: 230
-
for PR number: 1KP,
1KT - Thickness [mm]: 16.7
- Length [mm]: 87
- Height [mm]: 53
- Wear Warning Contact: not prepared for wear warning indicator
- Brake System: Trw
- Manufacturer: DRIVE




- Fitting Position: Rear Axle
- Thickness [mm]: 15
- Length [mm]: 87.3
- Width [mm]: 87
- Height [mm]: 53
-
Brake System: Lucas-
girling - Manufacturer: DRIVE


- Fitting Position: Rear Axle
- Brake System: TRW
- WVA Number: 20960
- Length 1 [mm]: 87
- Height 1 [mm]: 53
- Thickness 1 [mm]: 17
- Manufacturer: MAGNETI MARELLI


- Fitting Position: Rear Axle
-
for PR number: 1KE,
1KP, 1KT - Quantity per packing unit: 4
-
Supplementary Article/Info 2: with bolts/
screws - Width [mm]: 87
- Height [mm]: 52.9
- Brake System: TRW
- Supplementary Article/Supplementary Info: with accessories
- Thickness [mm]: 17
- Manufacturer: LPR



- for brake disc diameter [mm]: 230
-
for PR number: 1KP,
1KT - Fitting Position: Rear Axle
- Thickness [mm]: 16.7
- Length [mm]: 87
- Height [mm]: 53
- Wear Warning Contact: incl. wear warning contact
- Brake System: Girling
- Warning Contact Length [mm]: 260
- Manufacturer: DRIVE



- Construction Year to: 02.2001
- Fitting Position: Rear Axle
- Brake System: LUCAS
-
Supplementary Article/Info 2: with bolts/
screws, without anti- squeak plate - Width [mm]: 87
- Height [mm]: 52.9
- Thickness [mm]: 15.2
- Wear Warning Contact: without integrated wear sensor
-
Test Mark: ECE-
R90 - WVA Number: 20960
- Weight [kg]: 0.89
- Manufacturer: VALEO KLOCKI


- Fitting Position: Front Axle
- Width [mm]: 137.8
- Thickness [mm]: 19.7
- Height [mm]: 51.2
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article/Supplementary Info: with accessories
- Height 1 [mm]: 49
- General Information: Brake pad; front; without wire
- Manufacturer: VIKA

































































-
for PR number: 1KP,
1KT, 1KX, 1KY, E54, 2EL, 1KU, 2EE - Width [mm]: 87.5
- Wear Warning Contact: excl. wear warning contact
- Brake System: LUCAS
- Thickness [mm]: 17.4
- Height [mm]: 52.9
- Fitting Position: Rear Axle
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.



- Fitting Position: Rear Axle
-
for PR number: 1KP,
1KT, 1KX, 2EL, 1KU, 2EE, 1KY, E54 - Width [mm]: 87
- Height [mm]: 53
- Thickness [mm]: 17.2
- Wear Warning Contact: not prepared for wear warning indicator
- Brake System: Lucas
- Friction Lining Material: Ceramic
-
Name: Piduriklotsi komplekt,
ketaspidur - Manufacturer: QUARO
- Lisainfo: QP8078C
- Additional information: QP8078C







































- Fitting Position: Rear Axle
- reinforced version:
- Block Separation:
- for brake disc diameter [mm]: 230
-
for PR number: 1KP,
1KT - Quantity per packing unit: 4
-
FMSI Code: D1017-
7920 D1112- 821 -
Test Mark: E1 90R-
01878/ 507 - Brake System: TRW
-
Supplementary Article/Info 2: with anti-
squeak plate - Supplementary Article/Supplementary Info: with accessories
- WVA Number: 20960
-
Friction Lining Material: Low-
Metallic - Wear Warning Contact: not prepared for wear warning indicator
- Width 1 [mm]: 87.2
- Width 2 [mm]: 87
- Height 1 [mm]: 53
- Height 2 [mm]: 53
- Thickness 1 [mm]: 17
- Thickness 2 [mm]: 17
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE LP2254


- Fitting Position: Rear Axle
- for brake disc diameter [mm]: 230
-
for PR number: 1KP,
1KT - Quantity per packing unit: 4
-
FMSI Code: D1981-
9209 -
Test Mark: E1 90R-
01878/ 1103 - Brake System: TRW
-
Supplementary Article/Info 2: without anti-
squeak plate - Supplementary Article/Supplementary Info: with accessories
-
WVA Number: 20960,
23823 -
Friction Lining Material: Low-
Metallic - Wear Warning Contact: incl. wear warning contact
- Width 1 [mm]: 87.2
- Width 2 [mm]: 87
- Height 1 [mm]: 52.9
- Height 2 [mm]: 52.9
- Thickness 1 [mm]: 16.9
- Thickness 2 [mm]: 16.9
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE LP1815



-
for PR number: 1KP,
1KT - Fitting Position: Rear Axle
- Width [mm]: 87.1
- Height [mm]: 52.8
- Thickness [mm]: 17.2
- Wear Warning Contact: not prepared for wear warning indicator
- Brake System: TRW
- Supplementary Article/Supplementary Info: with accessories
-
Supplementary Article/Info 2: with anti-
squeak plate, with brake caliper screws - Quality: PREMIUM
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: MEY
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.


- Fitting Position: Front Axle
- Kulumishoiatus kontakt: koos integreeritud kulumianduriga
- Kulumisnäidikute arv [ühe telje kohta]: 1
- Kõrgus 1 (mm): 74
- Kõrgus 2 (mm): 74
- Pidurisüsteem: ATE
- Hoiatuskontakti pikkus (mm): 155
-
Laius 1 (mm): 156,
3 -
Laius 2 (mm): 156,
3 -
Jämedus/Tugevus 1 (mm): 20,
3 -
Jämedus/Tugevus 2 (mm): 19,
7 - Manufacturer: JPN





- Fitting Position: Rear Axle
-
for PR number: 1KP,
1KT - Quantity per packing unit: 4
- Number of pads: 4
- Thickness [mm]: 17
- Length [mm]: 87
- Height [mm]: 53
- Wear Warning Contact: incl. wear warning contact
- Brake Lining: With bevelled edges
- Brake System: TRW
-
WVA Number: 23554,
23823 - Name: SK VKBP90440E
- Manufacturer: SKF


-
for PR number: 1ZD,
1ZE -
Vehicle Identification Number (VIN) from: 1J-
Y- 000001 - Fitting Position: Front Axle
- Width [mm]: 156.3
- Thickness [mm]: 19.8
- Height [mm]: 74
- Wear Warning Contact: incl. wear warning contact
- Brake System: ATE
- Thickness 2 [mm]: 20.3
- Manufacturer: DENCKERMANN ZAWIESZENIE


-
for PR number: 1ZE,
1ZH, 1LN, 1LE - Fitting Position: Front Axle
- Kulumishoiatus kontakt: koos integreeritud kulumianduriga
- Kõrgus 1 (mm): 74
- Kõrgus 2 (mm): 74
- Pidurisüsteem: ATE
-
Laius 1 (mm): 156,
3 -
Laius 2 (mm): 156,
3 -
Jämedus/Tugevus 1 (mm): 20,
3 -
Jämedus/Tugevus 2 (mm): 19,
7 - Manufacturer: PROFIPOWER



- Fitting Position: Rear Axle
- Brake System: LUCAS
-
Supplementary Article/Info 2: with bolts/
screws, without anti- squeak plate - Width [mm]: 87
- Height [mm]: 52.8
- Thickness [mm]: 17.2
- Wear Warning Contact: without integrated wear sensor
-
Test Mark: ECE-
R90 - WVA Number: 20960
- Weight [kg]: 0.949
- Manufacturer: VALEO KLOCKI


- Fitting Position: Front Axle
- Width [mm]: 146
- Thickness [mm]: 18.3
- Height [mm]: 54.7
-
Material: Semi-
Metallic - Wear Warning Contact: incl. wear warning contact
- Supplementary Article/Supplementary Info: with spring
- Supplementary Article/Info 2: without bolts
- General Information: Brake pad; front; with wire
- Manufacturer: VIKA



- for brake disc diameter [mm]: 288
-
for PR number: 1ZH,
1ZE, 1ZD, 1LN, 1LE - Fitting Position: Front Axle
- for OE number: 1J0698151M
-
Manufacturer: ASHIKA-
KLOCKI


- Fitting Position: Rear Axle
-
for PR number: 1KP,
1KT, 1KU, 1KX, 1KY, 2EE, 2EL, E54 - Width [mm]: 87
- Height [mm]: 53
- Thickness [mm]: 17.2
- Wear Warning Contact: not prepared for wear warning indicator
- Supplementary Article/Info 2: with brake caliper screws
- WVA Number: 23554
- Brake System: Lucas
- Observe mounting information:
- Packaging length [cm]: 9.5
- Packaging width [cm]: 8.2
- Packaging height [cm]: 7.3
- Weight [kg]: 1
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: TEX







- Fitting Position: Rear Axle
- Quantity per packing unit: 4
- Manufacturer Restriction: TRW
- Wear Warning Contact: not prepared for wear warning indicator
- Width [mm]: 87
- Height [mm]: 52.9
- Thickness [mm]: 17
- Supplementary Article/Supplementary Info: with accessories
- Supplementary Article/Info 2: with brake caliper screws
- Brake Lining: With bevelled edges
-
Test Mark: E9 90R-
02A1148/ 0457 - Observe technical data:
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: TRW
- Quality class: Q
Braking System: Low dust brake pads, also for perforated brake discs, not for carbon-ceramic brake discs, only in conjunction with steel brake discs SVHC: No information available, please contact the manufacturer!



- Fitting Position: Front Axle
- Brake System: TEVES
- Width [mm]: 157
- Height [mm]: 74.2
- Thickness [mm]: 19.2
- Width 2 [mm]: 157
- Height 2 [mm]: 74.2
- Thickness 2 [mm]: 19.5
- Number of wear indicators [per axle]: 1
- Warning Contact Length [mm]: 155
-
Supplementary Article/Info 2: with anti-
squeak plate -
Test Mark: ECE-
R90 - WVA Number: 21911
- Weight [kg]: 2.09
- Manufacturer: VALEO
- Name: VA 301486
Wear Warning Contact: with integrated wear sensor, with integrated wear warning contact





- Fitting Position: Rear Axle
-
for PR number: 1KP,
1KT, 1KU, 1KX, 1KY, 2EE, 2EL, E54 - Quantity per packing unit: 4
- Width [mm]: 87
- Height [mm]: 53
- Thickness [mm]: 17.2
- Wear Warning Contact: not prepared for wear warning indicator
- Supplementary Article/Info 2: with brake caliper screws
- Supplementary Article/Supplementary Info: with accessories
- WVA Number: 23554
- Brake System: Lucas
- Weight [kg]: 1
- Assy./disassy. by qualified personnel required!:
- Name: HE 8DB355018111
- Manufacturer: HELLA PAGID

- Fitting Position: Front Axle
- Brake System: CONTINENTAL
- Width [mm]: 157
- Height [mm]: 74.2
- Thickness [mm]: 19
- Width 2 [mm]: 157
- Height 2 [mm]: 74.2
- Thickness 2 [mm]: 19.5
- Wear Warning Contact: without integrated wear sensor
-
Supplementary Article/Info 2: with anti-
squeak plate -
Test Mark: ECE-
R90 - WVA Number: 20676
- Weight [kg]: 1.997
- Manufacturer: VALEO
- Name: VA 302493


- Fitting Position: Front Axle
- Brake System: Ate
- Quantity per packing unit: 4
-
Test Mark: ECE-
R90 - Height 1 [mm]: 74.3
- Wear Warning Contact: excl. wear warning contact
- Vibration: with vibration damper
- Width 1 [mm]: 156.4
- Thickness 1 [mm]: 20
- Manufacturer: METELLI UKL.HAMULCOWY


- Fitting Position: Front Axle
- Quantity per packing unit: 4
-
FMSI Code: D687-
7434 -
Test Mark: E1 90R-
01881/ 521 - Brake System: Continental
-
Supplementary Article/Info 2: with anti-
squeak plate - Supplementary Article/Supplementary Info: without accessories
-
WVA Number: 20676,
21624 -
Friction Lining Material: Low-
Metallic - Width 1 [mm]: 155.8
- Width 2 [mm]: 156.3
- Height 1 [mm]: 74.2
- Height 2 [mm]: 74.2
- Thickness 1 [mm]: 19.1
- Thickness 2 [mm]: 19.1
- Manufacturer: DELPHI
- Name: DE LP978
Wear Warning Contact: excl. wear warning contact, not prepared for wear warning indicator


-
Vehicle Identification Number (VIN) to: 1J-
X- 800000 - Fitting Position: Front Axle
-
for PR number: 1LE,
1LN, 1ZE, 1ZH - Quantity per packing unit: 4
- Thickness [mm]: 19.5
- Brake System: ATE
- Height [mm]: 74.2
- Width [mm]: 156.4
- Manufacturer: LPR



- Fitting Position: Rear Axle
-
for PR number: 1KK,
1KP, 1KQ, 1KS, 1KT, 1KV, 1KW - for brake disc diameter [mm]: 230
- Quantity per packing unit: 4
- Brake System: TRW
- Supplementary Article/Supplementary Info: without accessories
- Width [mm]: 87
- Height 1 [mm]: 53
- Thickness [mm]: 17
- WVA Number: 20961
- Test Mark: R90 Homologated
- Quality: 630
- Wear Warning Contact: not prepared for wear warning indicator
- Weight [kg]: 1
- Packing Type: Carton
- Packaging length [cm]: 16.8
- Packaging width [cm]: 12.7
- Packaging height [cm]: 4.7
- Manufacturer: JURID


- Fitting Position: Front Axle
-
for PR number: 1ZR,
1LJ, E54, 1LN, 1ZH, 1LE, 1ZE, 1ZD - Width [mm]: 156
- Height [mm]: 74
- Thickness [mm]: 20.8
- Wear Warning Contact: with integrated wear warning contact
- Number of wear indicators [per axle]: 1
- directional:
- Brake System: Teves
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: QUARO


- for brake disc diameter [mm]: 288
-
for PR number: 1LE,
1LN, 1ZD, 1ZE, 1ZH - Block Separation:
- Length [mm]: 156
- Width [mm]: 74.2
- Test Mark: ECE R90 Approved
- Supplementary Article/Info 2: with piston clip
- Fitting Position: Front Axle
-
Thickness 1 [mm]: 20.3,
19.5 - Wear Warning Contact: incl. wear warning contact
- Weight [kg]: 2.1
- Observe service information:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Fitting Position: Front Axle
-
Vehicle Identification Number (VIN) to: -
1JX800000 -
for PR number: 1ZP,
1ZM, 1ZF, 1LQ, 1LR, 1LS - Quantity per packing unit: 4
-
Brake System: ATE-
TEVES - Width [mm]: 146
- Height [mm]: 55
- Thickness [mm]: 20
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Test Mark: ECE R90 APPROVED
- Manufacturer: ZIMMERMANN




- Construction Year to: 02.2001
-
for PR number: 1ZD,
1LN, 1ZH, 1LE, 1ZE - Block Separation:
- Fitting Position: Front Axle
- Width [mm]: 156.4
- Height [mm]: 74
- Thickness [mm]: 20.1
- Number of wear indicators [per axle]: 1
- Wear Warning Contact: incl. wear warning contact
- Warning Contact Length [mm]: 145
- Brake System: ATE
-
Supplementary Article/Info 2: with anti-
squeak plate -
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: MEY


- Fitting Position: Front Axle
-
for PR number: 1ZR,
1LJ, E54, 1LN, 1ZH, 1LE, 1ZE, 1ZD - Width [mm]: 156
- Height [mm]: 74
- Thickness [mm]: 20.8
- Number of wear indicators [per axle]: 1
- directional:
- Brake System: Teves
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: QUARO


- Fitting Position: Front Axle
- Width [mm]: 156.5
- Thickness [mm]: 19.5
- Height [mm]: 74.2
-
Material: Low-
Metallic - Wear Warning Contact: incl. wear warning contact
- Supplementary Article/Info 2: with mounting manual
- General Information: Brake pad; front; with wire
- Manufacturer: VIKA


- for OE number: 8N0 698 151 C
- Fitting Position: Front Axle
- Manufacturer: TRUCKTEC


- Fitting Position: Front Axle
- Quantity per packing unit: 4
-
FMSI Code: D687-
7710 -
Test Mark: E1 90R-
01881/ 687 - Brake System: Continental
-
Supplementary Article/Info 2: with anti-
squeak plate - Supplementary Article/Supplementary Info: without accessories
-
WVA Number: 20676,
21911, 23392 -
Friction Lining Material: Low-
Metallic - Wear Warning Contact: incl. wear warning contact
- Width 1 [mm]: 156.5
- Width 2 [mm]: 156.3
- Height 1 [mm]: 74.2
- Height 2 [mm]: 74.2
- Thickness 1 [mm]: 19.1
- Thickness 2 [mm]: 19.1
- Manufacturer: DELPHI
- Name: DE LP1525



























-
for PR number: 1KE,
1KP, 1KT - Fitting Position: Rear Axle
- Width [mm]: 87.6
- Height [mm]: 52.9
- Thickness [mm]: 17.2
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article/Supplementary Info: with accessories
- Supplementary Article/Info 2: with brake caliper screws
- Number of bolts/screws: 4
-
Brake System: Lucas /
TRW -
Test Mark: E1 90R-
02A0333/ 0221, E1 90R- 02A0650/ 0200 - MAPP code available:
-
Article number of recommended accessories: 13.0460-
0072.2 - Observe dimensions:
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: ATE
- Quality class: Q


- Fitting Position: Front Axle
- General Information: Brake pad; front; with wire
- Manufacturer: VIKA



- Fitting Position: Rear Axle
-
for PR number: 1KK,
1KP, 1KQ, 1KS, 1KT, 1KV, 1KW - for brake disc diameter [mm]: 230
- Quantity per packing unit: 4
- Brake System: TRW
- Supplementary Article/Supplementary Info: with accessories
- Width [mm]: 87
- Height [mm]: 53
- Height 1 [mm]: 53
- Thickness [mm]: 17
- WVA Number: 20961
- Test Mark: R90 Homologated
- Wear Warning Contact: not prepared for wear warning indicator
- Weight [kg]: 1
- Packing Type: Carton
- Packaging length [cm]: 16.8
- Packaging width [cm]: 12.7
- Packaging height [cm]: 4.7
- Manufacturer: JURID


- for brake disc diameter [mm]: 288
-
for PR number: 1LE,
1LN, 1ZD, 1ZE, 1ZH - Block Separation:
- Length [mm]: 156
- Width [mm]: 74
- Test Mark: ECE R90 Approved
- Supplementary Article/Info 2: with piston clip
- Fitting Position: Front Axle
- Thickness 1 [mm]: 20
- Wear Warning Contact: incl. wear warning contact
- Weight [kg]: 2.233
- Observe service information:
- Manufacturer: BLUE PRINT HAMULCE
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.




- Fitting Position: Front Axle
- for brake disc diameter [mm]: 288
-
for PR number: 1LE,
1LJ, 1LN, 1ZD, 1ZE, 1ZH - Quantity per packing unit: 4
- Number of pads: 4
- Length [mm]: 156.4
- Height [mm]: 74.5
- Wear Warning Contact: incl. wear warning contact
- Brake Lining: With bevelled edges
- Brake System: Teves
- Thickness 1 [mm]: 19.3
- Thickness 2 [mm]: 19.6
-
WVA Number: 20676,
21911, 23392 - Name: SK VKBP80270E
- Manufacturer: SKF


- Fitting Position: Rear Axle
- Quantity per packing unit: 4
-
Brake System: LUCAS-
GIRLING - Width [mm]: 87
- Height [mm]: 53
- Thickness [mm]: 17
-
Supplementary Article/Info 2: with bolts/
screws - WVA Number: 20961
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Test Mark: ECE R90 APPROVED
- Manufacturer: ZIMMERMANN


- Fitting Position: Rear Axle
- Quantity per packing unit: 4
-
Brake System: LUCAS-
GIRLING - Width [mm]: 87
- Height [mm]: 53
- Thickness [mm]: 17
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
-
Supplementary Article/Info 2: with bolts/
screws - Test Mark: ECE R90 APPROVED
- Manufacturer: ZIMMERMANN




- Installatsiooni pool: Esisild
-
Jämedus/Tugevus (mm): 19,
3 -
Pikkus (mm): 156,
5 -
Kõrgus (mm): 74,
1 - Kulumishoiatus kontakt: koos kulumianduriga
-
Pidurisüsteem: Ate-
teves - Hoiatuskontakti pikkus (mm): 155
-
Jämedus/Tugevus 1 (mm): 20,
3 -
Jämedus/Tugevus 2 (mm): 19,
5 - Manufacturer: DRIVE


- Fitting Position: Front Axle
- Width [mm]: 156
- Height [mm]: 74
- Wear Warning Contact: excl. wear warning contact
- Brake System: ATE
- Thickness 1 [mm]: 19
- Thickness 2 [mm]: 20
- Manufacturer: KAMOKA



-
for PR number: 1LE,
1LJ, 1LN, 1ZD, 1ZE, 1ZH, 1ZR, E54 - Quantity per packing unit: 4
- Installatsiooni pool: Esisild
-
Laius (mm): 156,
4 -
Kõrgus (mm): 74,
2 - Kulumisnäidikute arv [ühe telje kohta]: 1
- Kulumishoiatus kontakt: koos kulumianduriga
- Pidurisüsteem: ATE
- Hoiatuskontakti pikkus (mm): 155
-
Jämedus/Tugevus 1 (mm): 19,
5 -
Jämedus/Tugevus 2 (mm): 20,
3 -
Kaal (kg): 1,
91 - Manufacturer: TOMEX


- Fitting Position: Front Axle
- Width 1 [mm]: 156.3
- Height 1 [mm]: 74
- Thickness 1 [mm]: 20.3
- Width 2 [mm]: 156.3
- Height 2 [mm]: 74
- Thickness 2 [mm]: 19.7
- Brake System: ATE
- Warning Contact Length [mm]: 155
- Wear Warning Contact: with integrated wear sensor
- Weight [kg]: 1.9
- Number of wear indicators [per axle]: 1
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: ABS



- Fitting Position: Front Axle
-
for PR number: 1ZR,
1LJ, E54, 1LN, 1ZH, 1LE, 1ZE, 1ZD - Width [mm]: 156
- Height [mm]: 74
- Thickness [mm]: 20.8
- Wear Warning Contact: with integrated wear warning contact
- Number of wear indicators [per axle]: 1
- Brake System: Teves
- Friction Lining Material: Ceramic
-
Name: Piduriklotsi komplekt,
ketaspidur - Manufacturer: QUARO






- Fitting Position: Front Axle
- Quantity per packing unit: 4
- Manufacturer Restriction: ATE
- Width [mm]: 156.4
- Height [mm]: 74.2
- Thickness [mm]: 19.5
- Wear Warning Contact: incl. wear warning contact
-
Test Mark: E9 90R 01107/
054 - directional:
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: TRW
- Quality class: Q
SVHC: No information available, please contact the manufacturer!


- Fitting Position: Front Axle
- Vehicle Identification Number (VIN) from: F1JY000001
-
for PR number: 1ZP,
1ZM, 1ZF, 1LQ, 1LR, 1LS - Quantity per packing unit: 4
-
Brake System: ATE-
TEVES - Width [mm]: 146
- Height [mm]: 55
- Thickness [mm]: 20
- Wear Warning Contact: incl. wear warning contact
- Number of wear indicators [per axle]: 1
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Test Mark: ECE R90 APPROVED
- Manufacturer: ZIMMERMANN



- Fitting Position: Rear Axle
-
for PR number: 1KY,
1KT, 1KU, 1KX, E54, 2EE, 2EL, 1KP - Quantity per packing unit: 4
- Width [mm]: 87
- Thickness [mm]: 17
- Height [mm]: 53
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article/Supplementary Info: with accessories
- Brake System: Lucas
-
Supplementary Article/Info 2: with brake caliper screws,
with anti- squeak plate -
WVA Number: 20961,
23554 - Manufacturer: BREMBO
- Name: BR P 85 020X
General Information: Brembo Xtra: the perfect brake pad for Brembo Xtra and Brembo Max brake discs.






























- Construction Year to: 02.2001
- Fitting Position: Front Axle
-
for PR number: 1LN,
1ZD, 1ZE, 1ZH - Wear Warning Contact: with integrated wear sensor
- Supplementary Article/Info 2: with piston clip
- Product must be determined on the vehicle or the motor:
-
Material: Low-
Metallic -
Test Mark: ECE-
R90 - WVA Number: 20676
- Thickness [mm]: 19.5
- Width [mm]: 156.5
- Height [mm]: 74.2
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: BOS
Article number of recommended accessories: 1987474137, 1987474175, 1987474432, 1987474315, 1987474373, 1987474314



- Fitting Position: Front Axle
-
for PR number: 1LJ,
1ZH, 1ZR, 1LE, 1LN, 1ZD, 1ZE, E54 - Quantity per packing unit: 4
- Width [mm]: 157
- Thickness [mm]: 21
- Height [mm]: 74
- Wear Warning Contact: incl. wear warning contact
- Supplementary Article/Supplementary Info: with accessories
- Brake System: Teves
- Warning Contact Length [mm]: 145
-
Supplementary Article/Info 2: with piston clip,
with anti- squeak plate - Number of wear indicators [per axle]: 1
-
WVA Number: 20676,
21911, 23392 - Manufacturer: BREMBO
- Name: BR P 85 045


- Wear Warning Contact: excl. wear warning contact
- Fitting Position: Front Axle
- Thickness [mm]: 18.5
- Length [mm]: 156.5
- Height [mm]: 74.2
-
Brake System: Ate-
teves - Thickness 1 [mm]: 20.3
- Thickness 2 [mm]: 19.5
- Manufacturer: DRIVE




- Construction Year to: 02.2001
-
for PR number: 1ZD,
1LN, 1ZH, 1LE, 1ZE - Block Separation:
- Fitting Position: Front Axle
- Width [mm]: 156.4
- Height [mm]: 74
- Thickness [mm]: 20.1
- Number of wear indicators [per axle]: 1
- Wear Warning Contact: incl. wear warning contact
- Warning Contact Length [mm]: 145
- Brake System: ATE
-
Supplementary Article/Info 2: with anti-
squeak plate - Quality: PREMIUM
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: MEY
General Information: MEYLE-PD brake pads have a very short brake-in time, to ensure safe initial braking and high performance from the start. MEYLE-PD brake pads have a brake-in coating on the pad or are treated with scorching technology.



























-
for PR number: 1KE,
1KP, 1KT - Fitting Position: Rear Axle
- Width [mm]: 87.6
- Height [mm]: 52.9
- Thickness [mm]: 17.2
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article/Supplementary Info: with accessories
- Supplementary Article/Info 2: with brake caliper screws
- Number of bolts/screws: 4
-
Brake System: Lucas /
TRW -
Test Mark: E1 90R-
02A0258/ 0193 - MAPP code available:
-
Article number of recommended accessories: 13.0460-
0072.2 - Observe dimensions:
- Permissible up to vehicle capacity [kW]: 225
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: ATE
- Quality class: Q
Technical Information: Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.



- Fitting Position: Front Axle
- Brake System: TEVES
- Width [mm]: 156
- Height [mm]: 74.1
- Thickness [mm]: 19.5
- Width 2 [mm]: 156
- Height 2 [mm]: 74.1
- Thickness 2 [mm]: 20.6
- Number of wear indicators [per axle]: 1
- Warning Contact Length [mm]: 155
-
Supplementary Article/Info 2: without anti-
squeak plate -
Test Mark: ECE-
R90 -
WVA Number: 21911,
23392 - Weight [kg]: 2.115
- Manufacturer: VALEO KLOCKI
Wear Warning Contact: with integrated wear sensor, with integrated wear warning contact


- Fitting Position: Front Axle
-
for PR number: 1LE,
1LJ, 1LN, 1ZD, 1ZE, 1ZH, 1ZR, E54 - Width 1 [mm]: 156.4
- Width 2 [mm]: 156.3
- Height [mm]: 74
- Thickness 1 [mm]: 20.8
- Thickness 2 [mm]: 19.6
- Wear Warning Contact: with integrated wear warning contact
- Number of wear indicators [per axle]: 1
- directional:
- WVA Number: 23392
- Brake System: Teves
- Article number of recommended accessories: 82029300
- Observe mounting information:
- Packaging length [cm]: 17
- Packaging width [cm]: 12
- Packaging height [cm]: 8.3
- Weight [kg]: 2.09
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: TEX


- Fitting Position: Front Axle
- Quantity per packing unit: 4
- Manufacturer Restriction: ATE
- Width [mm]: 156.4
- Height [mm]: 74.2
- Thickness [mm]: 19.5
- Wear Warning Contact: incl. wear warning contact
-
Test Mark: E9 90R-
02A1062/ 0725 - directional:
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: TRW
- Quality class: Q
Braking System: Low dust brake pads, also for perforated brake discs SVHC: No information available, please contact the manufacturer!


- Fitting Position: Front Axle
-
for PR number: 1ZE,
1ZD, 1LN, 1ZH, 1LE - Quantity per packing unit: 4
- Brake System: ATE
- Width [mm]: 156
- Height [mm]: 74
- Thickness [mm]: 20
- Wear Warning Contact: incl. wear warning contact
- Number of wear indicators [per axle]: 1
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Test Mark: ECE R90 APPROVED
- Manufacturer: ZIMMERMANN



























-
Vehicle Identification Number (VIN) to: 1J-
X- 800000 - for PR number: 1ZE
- Fitting Position: Front Axle
- Width [mm]: 156.3
- Height [mm]: 74
- Thickness [mm]: 19.8
- Thickness 2 [mm]: 20.3
- Spring Clip Diameter [mm]: 43
- Brake System: ATE
-
Test Mark: E9 90R-
02A1259/ 1629 - MAPP code available:
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: ATE
- Quality class: Q
Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact




- Fitting Position: Front Axle
-
for PR number: 1LE,
1LJ, 1LN, 1ZD, 1ZE, 1ZH, 1ZR, E54 - Quantity per packing unit: 4
- Width 1 [mm]: 156.4
- Width 2 [mm]: 156.3
- Height [mm]: 74
- Thickness 1 [mm]: 20.8
- Thickness 2 [mm]: 19.6
- Wear Warning Contact: with integrated wear warning contact
- WVA Number: 23392
- Brake System: Teves
-
Article number of recommended accessories: 8DZ 355 201-
171 - Weight [kg]: 2.09
- Assy./disassy. by qualified personnel required!:
- Name: HE 8DB355008471
- Manufacturer: HELLA PAGID



























-
Vehicle Identification Number (VIN) to: 1J-
X- 800000 - for PR number: 1ZE
- Fitting Position: Front Axle
- Width [mm]: 156.3
- Height [mm]: 74
- Thickness [mm]: 19.8
- Spring Clip Diameter [mm]: 43
- Brake System: ATE
-
Test Mark: E9 90R-
02A1242/ 1629 - MAPP code available:
- Permissible up to vehicle capacity [kW]: 225
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: ATE
- Quality class: Q
Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact Technical Information: Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.



























-
Vehicle Identification Number (VIN) from: 1J-
Y- 000001 -
for PR number: 1ZD,
1ZE - Fitting Position: Front Axle
- Width [mm]: 156.3
- Height [mm]: 74
- Thickness [mm]: 19.8
- Thickness 2 [mm]: 20.3
- Spring Clip Diameter [mm]: 43
- Wear Warning Contact: incl. wear warning contact
- Number of wear indicators [per axle]: 1
- Warning Contact Length [mm]: 145
- Brake System: ATE
-
Test Mark: E9 90R-
02A1259/ 1629 - MAPP code available:
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: ATE
- Quality class: Q


- Fitting Position: Rear Axle
- Quantity per packing unit: 4
- Braking System: Low dust brake pads
-
Brake System: LUCAS-
GIRLING - Width [mm]: 87
- Height [mm]: 53
- Thickness [mm]: 17
-
Supplementary Article/Info 2: with bolts/
screws - WVA Number: 20961
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Test Mark: ECE R90 APPROVED
- Manufacturer: ZIMMERMANN


- Vehicle Identification Number (VIN) from: F1JY000001
- Fitting Position: Front Axle
-
for PR number: 1LQ,
1LR, 1LS, 1ZP, 1ZM, 1ZF - Quantity per packing unit: 4
- Braking System: Low dust brake pads
-
Brake System: ATE-
TEVES - Width [mm]: 146
- Height [mm]: 55
- Thickness [mm]: 20
- Wear Warning Contact: incl. wear warning contact
- Number of wear indicators [per axle]: 1
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Test Mark: ECE R90 APPROVED
- Manufacturer: ZIMMERMANN



























-
Vehicle Identification Number (VIN) from: 1J-
Y- 000001 -
for PR number: 1ZD,
1ZE - Fitting Position: Front Axle
- Width [mm]: 156.3
- Height [mm]: 74
- Thickness [mm]: 19.8
- Thickness 2 [mm]: 20.3
- Spring Clip Diameter [mm]: 43
- Wear Warning Contact: incl. wear warning contact
- Number of wear indicators [per axle]: 1
- Warning Contact Length [mm]: 145
- Brake System: ATE
-
Test Mark: E9 90R-
02A1242/ 1629 - MAPP code available:
- Permissible up to vehicle capacity [kW]: 225
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: ATE
- Quality class: Q
Technical Information: Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.


- Fitting Position: Front Axle
-
for PR number: 1ZE,
1ZD, 1LN, 1ZH, 1LE - Quantity per packing unit: 4
- Braking System: Low dust brake pads
- Brake System: ATE
- Width [mm]: 156
- Height [mm]: 74
- Thickness [mm]: 20
- Wear Warning Contact: incl. wear warning contact
- Number of wear indicators [per axle]: 1
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Test Mark: ECE R90 APPROVED
- Manufacturer: ZIMMERMANN


- Fitting Position: Front Axle
-
Vehicle Identification Number (VIN) to: -
1JX800000 -
for PR number: 1ZP,
1ZM, 1ZF, 1LQ, 1LR, 1LS - Quantity per packing unit: 4
- Braking System: Low dust brake pads
-
Brake System: ATE-
TEVES - Width [mm]: 146
- Height [mm]: 55
- Thickness [mm]: 20
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Test Mark: ECE R90 APPROVED
- Manufacturer: ZIMMERMANN