Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: frontal sided
- Required quantity: 1
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Width [mm]: 10
- SVHC: No SVHC present!
- Manufacturer: INA
- Name: LU 413009310
-
Engine Code: AHF,
ASV - Block Separation:
- Fitting Position: Front
- Height 1 [mm]: 10
- Outer Diameter 1 [mm]: 47
- Inner Diameter 1 [mm]: 32
-
Material: FPM
(fluoride rubber) - for OE number: 026103085D
- Swirl Type: Alternating Twist
- Dust Cover: with dust lip
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: COT
- Additional information: 12012709
- Lisainfo: 12012709
Vehicle Identification Number (VIN) to: 1J-1B090 443, 1J-1D310 510, 1J-1P148 597, 1J-1U126 098, 1J-1W358 437
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: ASW
- Swirl Type: Alternating Twist
-
Material: FPM
(fluoride rubber)/ ACM (polyacrylate rubber) - Dust Cover: with dust lip
- Alternative Repair Kit: 325.156
- Manufacturer: ELRING
- Fitting Position: frontal sided
-
Engine Code: AHF,
ASV - Block Separation:
-
Material: FPM
(fluoride rubber) - Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: A SL
- Swirl Type: Alternating Twist
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: REI
-
Lisainfo: 81-
19299- 10 -
Additional information: 81-
19299- 10
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
-
Swirl Type: Alternating Twist,
Right- hand Twist - Dust Cover: with dust lip
-
Material: PTFE
(polytetrafluoroethylene) - Manufacturer: TOPRAN HANS PRIES
Vehicle Identification Number (VIN) from: 1J-1B090444, 1J-1U126099, 1J-1D310511, 1J-1P148598, 1J-1W358438 General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Engine Code: AHF,
ASV - Engine Number from: 140001
- Block Separation:
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Swirl Type: Alternating Twist
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: AJU
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: ASW
- Swirl Type: Alternating Twist
-
Material: FPM
(fluoride rubber) - Dust Cover: with dust lip
- Alternative Repair Kit: 325.155
- Manufacturer: ELRING
- Fitting Position: frontal sided
- Engine Code: ASV
- Height [mm]: 10
- Outer Diameter [mm]: 47
- Inner Diameter [mm]: 32
-
Material: PTFE
(polytetrafluoroethylene) - for OE number: MN980030
- Rotation Direction: Clockwise rotation
- Manufacturer: FAI
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: ASW
-
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
- Observe mounting information:
- Manufacturer: ELRING
- Lisainfo: 129.780 ELRING
- Additional information: 129.780 ELRING
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease
-
Engine Code: AHF,
ASV - Block Separation:
- Fitting Position: frontal sided
- Height 1 [mm]: 10
- Outer Diameter 1 [mm]: 47
- Inner Diameter 1 [mm]: 32
-
Material: PTFE
(polytetrafluoroethylene) - for OE number: 038103085A
-
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: COT
- Additional information: 20026413
- Lisainfo: 20026413
Vehicle Identification Number (VIN) from: 1J-1B090 444, 1J-1D310 511, 1J-1P148 598, 1J-1U126 099, 1J-1W358 438
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
-
Swirl Type: Right-
hand Twist - Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
- Fitting Position: Axle beam
- General Information: Oil seal for camshaft
- Manufacturer: BORSEHUNG
- Thickness [mm]: 10
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Rotation Direction: Clockwise rotation
-
Material: ACM
(Polyacrylate), PTFE (polytetrafluoroethylene) - Supplementary Article/Info 2: with mounting sleeve
- Fitting Position: frontal sided
- Weight [kg]: 0.01
- Observe service information:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 03G 105 021 C
- Thickness [mm]: 10
- Inner Diameter [mm]: 35
- Fitting Position: frontal sided
- Outer Diameter [mm]: 48
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: ASV
- Quantity per packing unit: 10
- Additionally required articles (article numbers): PD002
- Width [mm]: 25
- for shaft diameter from [mm]: 28.921
- Standard Size [STD]:
- Thickness [mm]: 1.512
- Manufacturer: FAI
- Outer Diameter [mm]: 47
- Thickness [mm]: 10
- Inner Diameter [mm]: 32
- Fitting Position: transmission sided
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: ASV
- Standard Size [STD]:
-
Position/Degree: 1-
5 -
Component Number: 73-
3903 - Name: Nukkvollilaager
- Manufacturer: GLY
-
Engine Code: AHF,
ASV - Block Separation:
- Length [mm]: 418
- Diameter [mm]: 46.6
- Name: NUKKVOLL
- Manufacturer: FRE
-
Fitting Position: Intake Side,
Exhaust Side - Engine Code: ASV
- Name: Nukkvoll
- Manufacturer: MVE
- Engine Code: ASV
- Guarantee: 3 years guarantee
- Weight [kg]: 4.35
- Always compare old and new part (in particular OE No.):
- Name: CE 80SKV005
- Manufacturer: ESEN SKV
- Weight [kg]: 2.3
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Weight [kg]: 2.3
- Name: SW 30 91 9738
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- SVHC: No SVHC present!
- Name: NUKKVOLL
- Manufacturer: INA
-
Engine Code: ASV,
AHF - Block Separation:
- Supplementary Article/Info 3: for cast shaft
- Name: NUKKVOLL
- Manufacturer: KS
Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
- Engine Code: ASV
- Material: Cast Iron
- Manufacturer: FEDERAL MOGUL
- Engine Code: ASV
- Additionally required articles (article numbers): BFS66S
- Material: Cast Steel
- for OE number: 038109101K
- Manufacturer: FAI
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks