Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Suspension: for vehicles with bad road version
- Fitting Position: Rear Axle
- Height [mm]: 160
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Fitting Position: Front Axle
- Manufacturer: JP GROUP
- Lisainfo: Antud 1 tk hind.
- Additional information: Antud 1 tk hind.
- Fitting Position: Rear Axle
- Height [mm]: 180
-
Lisainfo: Protection sleeve for shock absorber,
rear -
Additional information: Protection sleeve for shock absorber,
rear
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut Insert
-
Shock Absorber Mounting Type: Top pin,
Bottom eye -
Shock Absorber System: Twin-
Tube - Lisainfo: Shock Absorber
- Additional information: Shock Absorber
Suspension: for vehicles without sports suspension, for vehicles without bad road version
- Fitting Position: Front Axle
- Height [mm]: 215
- Material: Thermoplast
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Front Axle
- Bellows Material: Thermoplast
- Height [mm]: 222
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
for PR number: 1JA,
1JC, 1JD, UA9, UB1, UB2, UB3 - Block Separation:
- Fitting Position: Rear Axle
-
Material: PP
(Polypropylene) - Height [mm]: 179
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Rear Axle
- Manufacturer: GSP
- Quantity: 2
-
Vehicle Identification Number (VIN) from: 1J-
1- 000 001 -
Vehicle Identification Number (VIN) to: 1J-
Y- 800 000, 1J- Y- 900 000 - Fitting Position: Front Axle
- Weight [kg]: 0.068
- Thickness [mm]: 225
- Material: Thermoplastic polyester elastomer
- Required quantity: 2
- General Information: Dust cover for shock absorber; front
- Manufacturer: VIKA
- Mounting Type: Rubber Mount
- Fitting Position: Front Axle
- Height [mm]: 222
- for OE number: 357413175A
- Manufacturer: SASIC
- Suspension: for vehicles without heavy duty suspension
- Width [mm]: 59
- Thickness [mm]: 180
-
Material: PP
(Polypropylene) - Fitting Position: Rear Axle
- Weight [kg]: 0.032
- Manufacturer: FEBI BILSTEIN
- Additional information: F22142
- Lisainfo: F22142
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 225
- Material: Thermoplastic polyester elastomer
- Fitting Position: Front Axle
- Weight [kg]: 0.068
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle both sides
- General Information: Dust cover for shock absorber; rear
- Manufacturer: BORSEHUNG
- Suspension: for vehicles without heavy duty suspension
- Width [mm]: 59
- Thickness [mm]: 180
-
Material: PP
(Polypropylene) - Fitting Position: Rear Axle
- Weight [kg]: 0.032
- Name: SW 30 92 2142
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 225
- Material: Thermoplastic polyester elastomer
- Fitting Position: Front Axle
- Weight [kg]: 0.068
- Name: SW 30 60 0038
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 1J0513425
- Fitting Position: Rear Axle
- Height [mm]: 162
- Required quantity: 2
- Material: Thermoplast
- Weight [g]: 54
- Diameter 1 [mm]: 36
- Diameter 2 [mm]: 56
- Name: IM 37265
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- for OE number: 1J0513425A
- Fitting Position: Rear Axle
- Height [mm]: 180
- Required quantity: 2
- Material: Thermoplast
- Weight [g]: 58
- Diameter 1 [mm]: 37
- Diameter 2 [mm]: 56
- Name: IM 37372
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- Fitting Position: Front Axle both sides
- General Information: Dust cover for shock absorber; front
- Manufacturer: BORSEHUNG
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: LEMFORDER
- Name: LMI 2039001
SVHC: No information available, please contact the manufacturer!
-
Fabrication Number: A-
AU- 015 -
Fitting Position: Rear Axle Left,
Rear Axle Right - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Observe technical data:
- Manufacturer: NTY
-
for combined PR number: 1JA,
1JD, UA9 - Fitting Position: Rear Axle
- Manufacturer: FEBEST
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Manufacturer: GSP AMORTYZATOR
-
Fabrication Number: A-
VW- 016 -
Fitting Position: Rear Axle Left,
Rear Axle Right -
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Observe technical data:
- Replace in pairs only:
- Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Suspension: for vehicles with sports suspension
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Manufacturer: GSP AMORTYZATOR
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Shock Absorber System: Twin-
Tube - Manufacturer: KAMOKA
- Suspension: for vehicles with standard suspension
- Shock Absorber Type: Gas Pressure
- Fitting Position: Rear Axle
- Shock Absorber Design: Absorber does not carry a spring
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Shock Absorber System: Twin-
Tube - Name: Gas shock absorber
- Quality class: PJ
Lisainfo: "Tootja: SRL
OCTAVIA/GOLF IV KOM.
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
OCTAVIA/GOLF IV KOM.
(kvaliteediklass: PJ)"
- Fitting Position: Rear Axle
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Suspension: for vehicles with standard suspension
- Manufacturer: KAMOKA AMORTYZATORY
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Name: CFD 563402
- Manufacturer: DACO
Suspension: for vehicles without sports suspension, for vehicles without bad road version
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Top pin,
Bottom eye -
Shock Absorber System: Twin-
Tube - Manufacturer: DENCKERMANN AMORTYZATORY
- Installatsiooni pool: Tagasild
- Amorditüüp: Gaasirõhk
-
Amort-kinnitusliik: ülemine tihvt,
Silma all - Amort-süsteem: kaks toru
-
Amort-Ehitusliik: Teleskoop-
amort - Name: BM SA0021
- Manufacturer: BREMSI
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
-
Fabrication Number: A-
VW- 011 - Manufacturer: NTY
-
Fitting Position: Rear Axle,
Rear Axle Right, Rear Axle Left - Shock Absorber Type: Oil Pressure
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: GH-
694706 - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Manufacturer: AUTO-
GH
Suspension: for vehicles with sports suspension, for vehicles without sports suspension, for vehicles without bad road version
-
Fitting Position: Rear Axle,
Rear Axle Right, Rear Axle Left - Shock Absorber Type: Oil Pressure
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: GH-
694706 - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Manufacturer: AUTO-
GH
Suspension: for vehicles with sports suspension, for vehicles without sports suspension, for vehicles without bad road version
- Fitting Position: Rear Axle
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Article number of recommended accessories: SMA0132
- Shock Absorber Design: Telescopic Shock Absorber
- for OE number: 1J9513025E
-
Manufacturer: ASHIKA-
AMORTYZATORY
- Installatsiooni pool: Tagasild
- Amort-süsteem: kaks toru
- Amorditüüp: Gaasirõhk
-
Amort-kinnitusliik: ülemine tihvt,
Silma all -
Amort-Ehitusliik: Teleskoop-
amort - Name: BM SA0419
- Manufacturer: BREMSI
- Suspension: for vehicles with standard suspension
- Quantity per packing unit: 2
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Diameter [mm]: 39
- Length 1 [mm]: 667
- Length 2 [mm]: 436
- Piston Rod Diameter [mm]: 12
- Quantity per axle: 1
- Observe technical data:
- Manufacturer: TRW AMORTYZATORY
SVHC: No information available, please contact the manufacturer!
- Suspension: for vehicles with heavy duty suspension
- Quantity per packing unit: 2
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Length 1 [mm]: 655
- Length 2 [mm]: 416
- Quantity per axle: 1
- Observe technical data:
- Manufacturer: TRW AMORTYZATORY
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Rear Axle
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Article number of recommended accessories: SMJ0132
- Shock Absorber Design: Telescopic Shock Absorber
- for OE number: 1J9513025E
- Manufacturer: JAPKO
-
Fitting Position: Rear Axle,
Rear Axle Right, Rear Axle Left - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: GH-
694706 - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Manufacturer: AUTO-
GH
Suspension: for vehicles with sports suspension, for vehicles without sports suspension, for vehicles without bad road version
-
Fitting Position: Rear Axle,
Rear Axle Right, Rear Axle Left - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: GH-
694706 - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Manufacturer: AUTO-
GH
Suspension: for vehicles without sports suspension, for vehicles with sports suspension, for vehicles without bad road version
-
Fitting Position: Rear Axle,
Rear Axle Right, Rear Axle Left - Shock Absorber Type: Oil Pressure
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: GH-
694706 - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Name: GH 309915
-
Manufacturer: AUTO-
GH
Suspension: for vehicles with sports suspension, for vehicles without sports suspension, for vehicles without bad road version
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Bottom eye,
Top pin - Manufacturer: KAVO
Suspension: for vehicles without sports suspension, for vehicles without bad road version
- Suspension: for vehicles with sports suspension
- Quantity per packing unit: 2
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Diameter [mm]: 39
- Length 1 [mm]: 637
- Length 2 [mm]: 411
- Piston Rod Diameter [mm]: 12
- Quantity per axle: 1
- Observe technical data:
- Manufacturer: TRW AMORTYZATORY
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Rear Axle,
Rear Axle Right, Rear Axle Left - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: GH-
694706 - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Manufacturer: AUTO-
GH - Name: GH 339915
Suspension: for vehicles without sports suspension, for vehicles with sports suspension, for vehicles without bad road version
- Suspension: for vehicles with sports suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
- Manufacturer: GSP AMORTYZATOR
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
- Name: CFD 454710
- Manufacturer: DACO
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
-
Shock Absorber System: Twin-
Tube - Manufacturer: KAMOKA AMORTYZATORY
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
-
Shock Absorber System: Twin-
Tube - Manufacturer: KAMOKA AMORTYZATORY
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
-
Shock Absorber System: Twin-
Tube - Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Quantity: 2
-
Vehicle Identification Number (VIN) from: 1J-
Y- 480 001 - Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - General Information: Rear shock absorber; gas
- Manufacturer: VIKA
- Quantity: 2
- Fitting Position: Rear Axle
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - General Information: Rear shock absorber; oil
- Manufacturer: VIKA
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom Pin
-
Shock Absorber System: Twin-
Tube - Manufacturer: DENCKERMANN AMORTYZATORY
- Vehicle Equipment Line/Variant: ECONOMY
- Quantity per packing unit: 2
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Diameter [mm]: 39
- Length 1 [mm]: 649
- Length 2 [mm]: 410
- Quantity per axle: 1
- Observe technical data:
- Manufacturer: TRW AMORTYZATORY
SVHC: No information available, please contact the manufacturer!
- Suspension: for vehicles without sports suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Manufacturer: KAMOKA AMORTYZATORY
- Quantity per packing unit: 2
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
- Diameter [mm]: 50
- Length 1 [mm]: 525
- Length 2 [mm]: 355
- Piston Rod Diameter [mm]: 22
- Quantity per axle: 1
- Observe technical data:
- Manufacturer: TRW AMORTYZATORY
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Article number of recommended accessories: SMA0144
- Shock Absorber Mounting Type: Top pin
- for OE number: 1J0413031AM
-
Manufacturer: ASHIKA-
AMORTYZATORY
- Fitting Position: Rear Axle
- Amorditüüp: Gaasirõhk
-
Amort-Ehitusliik: Teleskoop-
amort -
Amort-kinnitusliik: Silma all,
ülemine tihvt - Manufacturer: OYODO
- Quantity per packing unit: 2
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Diameter [mm]: 50
- Length 1 [mm]: 525
- Length 2 [mm]: 355
- Piston Rod Diameter [mm]: 20
- Quantity per axle: 1
- Observe technical data:
- Manufacturer: TRW AMORTYZATORY
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front Axle,
Front Axle Right, Front Axle Left - Shock Absorber Type: Oil Pressure
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: GH-
364708, GH- 364709 - Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin
-
Manufacturer: AUTO-
GH
Suspension: for vehicles without sports suspension, for vehicles with sports suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
- Manufacturer: JP GROUP
-
Lisainfo: Suspension strut,
complete, front -
Additional information: Suspension strut,
complete, front
Suspension: for vehicles with sports suspension, for vehicles with bad road version
- Fitting Position: Front Axle
- Block Separation:
- Amorditüüp: Gaasirõhk
- Amort-Ehitusliik: Vedruamort
-
Amort-kinnitusliik: ülemine tihvt,
Rõngaskinnituse all - Manufacturer: OYODO
Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version
- Installatsiooni pool: Esisild
- Amorditüüp: Gaasirõhk
- Amort-Ehitusliik: Vedruamort
- Amort-süsteem: kaks toru
- Amort-kinnitusliik: ülemine tihvt
- Manufacturer: OYODO
- Fitting Position: Rear Axle
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Telescopic Shock Absorber
- Manufacturer: KYB
- Name: KY 9430018
Suspension: for vehicles without sports suspension, for vehicles without bad road version
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Shock Absorber System: Twin-
Tube - Length 1 [mm]: 448
- Length 2 [mm]: 668
- Bore Diameter [mm]: 25
- Piston Rod Diameter [mm]: 11
-
Article number of recommended accessories: MK118,
PK078 - Weight [kg]: 1.7
- Packaging length [cm]: 60
- Packaging width [cm]: 7.2
- Packaging height [cm]: 7.2
- Manufacturer: MONROE
Guarantee: 5 years guarantee with accessories when replaced in pairs
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Article number of recommended accessories: SMJ0144
- Shock Absorber Mounting Type: Top pin
- for OE number: 1J0413031AM
- Manufacturer: JAPKO
-
Fitting Position: Front Axle,
Front Axle Right, Front Axle Left - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: GH-
364708, GH- 364709, GH- 694702 - Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin
-
Manufacturer: AUTO-
GH
Suspension: for vehicles without sports suspension, for vehicles with sports suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp - General Information: Front shock absorber; oil
- Manufacturer: VIKA
- Fitting Position: Rear Axle
- Length [mm]: 672
- Length 2 [mm]: 449
- Shock Absorber Design: Damper Module
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Diameter 1 [mm]: 45
- Diameter 2 [mm]: 25
- Spring Type: for vehicles with coil spring suspension
- Manufacturer: MAGNETI MARELLI
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp - General Information: Front shock absorber; gas
- Manufacturer: VIKA
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Parameter: SEOV26X204A
- Manufacturer: SACHS
SVHC: No information available, please contact the manufacturer!
- Suspension: for vehicles with standard suspension
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Shock Absorber System: Twin-
Tube - Manufacturer: BILSTEIN
- Name: Gas shock absorber
- Quality class: Q
Lisainfo: "Tootja: BILSTEIN
SKODA/VW
(kvaliteediklass: Q)"
- Fitting Position: Front Axle
- Shock Absorber Type: Oil Pressure
- Article number of recommended accessories: SMJ0144
- Shock Absorber Mounting Type: Top pin
- Shock Absorber Design: Suspension Strut
- for OE number: 1J0413031AM
- Manufacturer: JAPKO
- Quantity: 2
-
Vehicle Identification Number (VIN) from: 1J-
1- 000 001, 1J- Y- 750 001, 1J- Y- 800 001 -
Vehicle Identification Number (VIN) to: 1J-
Y- 750 000, 1J- Y- 800 000, 1J- Y- 900 000 - Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp - General Information: Front shock absorber; gas
- Manufacturer: VIKA
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- reinforced version:
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Parameter: SEOV26X187A
- Manufacturer: SACHS
SVHC: No information available, please contact the manufacturer!
- Shock Absorber Type: Gas Pressure
- Fitting Position: Rear Axle
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin
- max. length [mm]: 665
- min. length [mm]: 428
- Standpipe Diameter [mm]: 40
- Piston Rod Diameter [mm]: 12
- Piston Rod Thread: M10x100
- Manufacturer: SNR AMORTYZATORY
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - General Information: Rear shock absorber
- Manufacturer: BORSEHUNG
- Fitting Position: Rear Axle
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Telescopic Shock Absorber
- Manufacturer: KYB
- Name: KY 343298
Suspension: for vehicles without sports suspension, for vehicles without bad road version
- Suspension: for vehicles without sports suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
-
Shock Absorber System: Twin-
Tube - Manufacturer: KAYABA AMORTYZATORY
- Name: KY 9410019
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp -
Shock Absorber System: Twin-
Tube -
Thread Size: M14x1,
5 - Piston Rod Length [mm]: 220
- Suspension: for vehicles with standard suspension
- Piston Rod Diameter [mm]: 22
-
Article number of recommended accessories: 732302,
AK- 735039, AK- 735410, F8- 5683 - Suspension Strut Outer Diameter [mm]: 51
- Manufacturer: OPTIMAL ZAWIESZENIE
-
Vehicle Identification Number (VIN): [;8L-
X- 140000] - Suspension: for vehicles with comfort suspension
- Shock Absorber Design: Suspension Strut
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
- max. length [mm]: 528
- min. length [mm]: 343
- Standpipe Diameter [mm]: 51
- Piston Rod Diameter [mm]: 20
- Piston Rod Thread: M14X150
- Name: SN SA65443.09
- Manufacturer: SNR
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp -
Shock Absorber System: Twin-
Tube - Bore Diameter [mm]: 32
- Piston Rod Diameter [mm]: 22
-
Article number of recommended accessories: MK077,
PK076 - Weight [kg]: 3.8
- Packaging length [cm]: 51.5
- Packaging width [cm]: 16.2
- Packaging height [cm]: 16.2
- Manufacturer: MONROE
Guarantee: 5 years guarantee with accessories when replaced in pairs
- Fitting Position: Front Axle
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Manufacturer: FEBEST
-
Vehicle Identification Number (VIN): [;8L-
X- 140000] - Suspension: for vehicles with comfort suspension
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Fitting Position: Front Axle
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- max. length [mm]: 524
- min. length [mm]: 337
- Standpipe Diameter [mm]: 51
- Piston Rod Diameter [mm]: 22
- Piston Rod Thread: M14X150
- Name: SN SA65443.12
- Manufacturer: SNR
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Oil Pressure
-
Parameter: SF32/
22X178A - Shock Absorber Mounting Type: Top pin
- Manufacturer: SACHS
- Name: SHS 315087
SVHC: No information available, please contact the manufacturer!
- Name: Gas shock absorber
- Quality class: PJ
Lisainfo: "Tootja: MAGNETI MARELLI
AUDI A3/GOLF IV/OCTA
(kvaliteediklass: Q)"
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Bottom Plate,
Top pin -
Shock Absorber System: Twin-
Tube - Manufacturer: BILSTEIN
-
Name: BI 22-
045744 - Quality class: Q
Suspension: for vehicles with standard suspension, for vehicles with bad road version
Lisainfo: "Tootja: BILSTEIN
A3/GOLF IV/OCTAVIA
(kvaliteediklass: Q)"
- Suspension: for vehicles with sports suspension
- Fitting Position: Rear Axle
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Telescopic Shock Absorber
- Manufacturer: KYB
- Name: KY 553206
- Suspension: for vehicles without sports suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Manufacturer: KYB
- Name: KY 634812
- Fitting Position: Front Axle
- Suspension: for vehicles with sports suspension
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube -
Parameter: SFE30/
22X179A - reinforced version:
- Shock Absorber Mounting Type: Top pin
- Manufacturer: SACHS
- Name: SHS 200954
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
- Manufacturer: KYB
- Name: KY 334812
- Suspension: for vehicles with sports suspension
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Shock Absorber System: Twin-
Tube - Manufacturer: BILSTEIN
-
Name: BI 19-
029177 - Quality class: Q
Additional information: "Tootja: BILSTEIN
AUDI A3/VW GOLF IV
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
AUDI A3/VW GOLF IV
(kvaliteediklass: Q)"
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp - General Information: Front shock absorber; gas
- Manufacturer: BORSEHUNG
- Suspension: for vehicles with bad road version
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Shock Absorber System: Twin-
Tube - Manufacturer: BILSTEIN
- Name: Gas shock absorber
- Quality class: Q
Additional information: "Tootja: BILSTEIN
AUDA A3 WZM. 96-
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
AUDA A3 WZM. 96-
(kvaliteediklass: Q)"
- Fitting Position: Front Axle
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Spring Type: for vehicles with coil spring suspension
- Manufacturer: MAGNETI MARELLI
- Name: MM 4303G
- Suspension: for vehicles with sports suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Bottom Plate,
Top pin -
Shock Absorber System: Twin-
Tube - Manufacturer: BILSTEIN
-
Name: BI 22-
045751 - Quality class: Q
Lisainfo: "Tootja: BILSTEIN
AUDI A3/VW GOLF IV
(kvaliteediklass: Q)"
- Suspension: for vehicles with sports suspension
- Fitting Position: Front Axle
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Manufacturer: KYB
- Suspension: for vehicles with standard suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Shock Absorber System: Single Tube Upside Down
- Manufacturer: BILSTEIN
-
Name: BI 35-
046370 - Quality class: Q
Additional information: "Tootja: BILSTEIN
AUDI TT ' 98-
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
AUDI TT ' 98-
(kvaliteediklass: Q)"
- Suspension: for vehicles with sports suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Shock Absorber System: Single Tube Upside Down
- Manufacturer: BILSTEIN
-
Name: BI 35-
046387 - Quality class: Q
Additional information: "Tootja: BILSTEIN
AUDI TT ' 98-
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
AUDI TT ' 98-
(kvaliteediklass: Q)"
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks