Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Left,
Right, Drive Axle -
Transmission Type: 5-
Speed Manual Transmission - Inner Diameter [mm]: 48
- Outer Diameter [mm]: 62
- Height [mm]: 7
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Length [mm]: 13
- Outer Diameter [mm]: 14
- External Thread Size: M10 x 1
- Thread Length [mm]: 6.5
- Spanner Size: 5
- Bolt Head-/Nut Design: Hexagon Socket
- Material: Steel
- Screw length below head [mm]: 9.5
- Supplementary Article/Info 2: with seal ring
- Weight [kg]: 0.008
-
Name: Sulgurkruvi,
sillaajam - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 04.2001
- Shape: round
- Fitting Position: both sides
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Length [mm]: 13
- Outer Diameter [mm]: 14
- External Thread Size: M10 x 1
- Thread Length [mm]: 6.5
- Spanner Size: 5
- Bolt Head-/Nut Design: Hexagon Socket
- Material: Steel
- Screw length below head [mm]: 9.5
- Supplementary Article/Info 2: with seal ring
- Weight [kg]: 0.008
-
Name: Sulgurkruvi,
sillaajam - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Transmission Code: EGR
- Transmission Type: for manual transmission
-
Fitting Position: Outlet,
Left - Alternatively:
- Thickness [mm]: 7
- Inner Diameter [mm]: 48
- Outer Diameter [mm]: 62
- Weight [kg]: 0.021
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Vehicle Identification Number (VIN) from: 1J-
3- 000001 -
Transmission Type: 5-
Speed Manual Transmission -
Fitting Position: Left,
Drive Axle - Inner Diameter [mm]: 48
- Outer Diameter [mm]: 62
- Height [mm]: 7
-
Material: ACM
(Polyacrylate) - Dust Cover: with dust lip
- Swirl Type: Alternating Twist
-
Name: Volli rongastihend,
diferentsiaal - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Outlet,
outer - Inner Diameter [mm]: 50
- Thickness [mm]: 10
- Seal Diameter [mm]: 65.5
- Shape: O Shape
-
Material: ACM
(Polyacrylate) - Outer Diameter [mm]: 65.5
- Weight [kg]: 0.024
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 04.2001
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 60
- Height [mm]: 12
- Fitting Position: Drive Axle
-
Material: NBR
(nitrile butadiene rubber) - Dust Cover: with dust lip
- Swirl Type: Alternating Twist
-
Name: Volli rongastihend,
diferentsiaal - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Engine Code: AGR,
ALH - Block Separation:
- Fitting Position: frontal sided
-
Material: FPM
(fluoride rubber) - Inner Diameter 1 [mm]: 32
- Outer Diameter 1 [mm]: 47
- Height 1 [mm]: 10
- Swirl Type: Alternating Twist
- Dust Cover: with dust lip
- for OE number: 026103085D
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: COT
- Additional information: 12012709
- Lisainfo: 12012709
Vehicle Identification Number (VIN) to: 1J-1B090 443, 1J-1D310 510, 1J-1P148 597, 1J-1U126 098, 1J-1W358 437
-
Vehicle Identification Number (VIN) to: 1J-
1- 300 000 - Thickness [mm]: 10
- for OE number: 068 103 085 E
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Weight [kg]: 0.023
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Centre
- General Information: radial shaft seal
- Manufacturer: BORSEHUNG
- Shape: O Shape
-
Material: NBR
(nitrile butadiene rubber) - Inner Diameter [mm]: 45
- Thickness [mm]: 6
- Seal Diameter [mm]: 60
- Outer Diameter [mm]: 40
- Weight [kg]: 0.022
- Manufacturer: VAICO
Fitting Position: Rear Axle, Rear Axle both sides, Front Axle both sides General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Transmission Code: EGR
- Transmission Type: for manual transmission
-
Fitting Position: Outlet,
Left - Inner Diameter 1 [mm]: 48
- Outer Diameter 1 [mm]: 62
- Height 1 [mm]: 7
-
Material: ACM
(Polyacrylate) - Dust Cover: with dust lip
- Swirl Type: Alternating Twist
-
Name: VOLLI RONGASTIHEND,
JAOTUSKAST - Manufacturer: COT
- Model Year to: 2001
- Fitting Position: Left
- Weight [kg]: 0.035
- Packaging length [cm]: 7.4
- Packaging width [cm]: 7.4
- Packaging height [cm]: 0.8
- Manufacturer: FEBEST
-
Fitting Position: Front Axle,
Outlet, Left - Inner Diameter 1 [mm]: 60
- Outer Diameter 1 [mm]: 74
- Height 1 [mm]: 8
-
Material: ACM
(Polyacrylate) - Dust Cover: with dust lip
- Swirl Type: Alternating Twist
-
Name: VOLLI RONGASTIHEND,
DIFERENTSIAAL - Manufacturer: COT
-
Transmission Type: 5-
Speed Manual Transmission - Required quantity: 2
- Construction Year to: 07.2002
- Fitting Position: Front Axle
- Inner Diameter [mm]: 48
- Outer Diameter [mm]: 62
- Height [mm]: 7
- Radial Shaft Seal Design: ASW
-
Material: ACM
(Polyacrylate) - Dust Cover: with dust lip
- Manufacturer: ELRING
- Fitting Position: frontal sided
- Inner Diameter [mm]: 51
- Outer Diameter [mm]: 65
- Thickness [mm]: 7
- Weight [kg]: 0.016
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- General Information: tapered ring; small
- Manufacturer: VIKA
-
Fitting Position: Front,
Right, Outlet - Transmission Code: EGR
- Inner Diameter 1 [mm]: 48
- Outer Diameter 1 [mm]: 60
- Outer Diameter 2 [mm]: 74
- Height 1 [mm]: 12.6
- Height 2 [mm]: 26.6
-
Material: ACM
(Polyacrylate) -
Name: VOLLI RONGASTIHEND,
JAOTUSKAST - Manufacturer: COT
-
Transmission Type: 5-
Speed Manual Transmission - Construction Year from: 07.2002
-
Fitting Position: Front Axle,
Right - Inner Diameter [mm]: 48
- Outer Diameter [mm]: 60
- Outer Diameter 1 [mm]: 74
- Height [mm]: 26.6
- Radial Shaft Seal Design: SP
-
Material: ACM
(Polyacrylate) -
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
- Manufacturer: ELRING
-
Vehicle Identification Number (VIN) from: 1J-
3- 000 001 -
Transmission Type: 5-
Speed Manual Transmission - Transmission ID: EGR
- Inner Diameter [mm]: 47
-
Material: ACM
(Polyacrylate) - Fitting Position: Right
- Weight [kg]: 0.05
-
Name: VOLLI RONGASTIHEND,
DIFERENTSIAAL - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Type: 5-
Speed Manual Transmission - Construction Year from: 07.2002
-
Fitting Position: Front Axle,
Right - Inner Diameter [mm]: 48
- Outer Diameter [mm]: 60
- Outer Diameter 1 [mm]: 74
- Height [mm]: 26.5
- Radial Shaft Seal Design: SP
-
Swirl Type: Right-
hand Twist -
Material: ACM
(Polyacrylate) - Dust Cover: with dust lip
-
Name: Volli rongastihend,
diferentsiaal - Manufacturer: ELR
- General Information: taper roller bearing
- Manufacturer: VIKA
- Outer Diameter [mm]: 47
- Thickness [mm]: 10
- Inner Diameter [mm]: 32
- Fitting Position: transmission sided
- Weight [kg]: 0.195
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.