Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Engine Code: AQM
- Switch pressure from [bar]: 0.55
- Switch pressure to [bar]: 0.85
- Colour Coding: brown
- Number of connectors: 1
- External Thread [mm]: M10x1
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Colour Coding: grey
- Number of pins: 2
- Manufacturer: JP GROUP
-
Lisainfo: Sender for water temperature gauge,
2 pins -
Additional information: Sender for water temperature gauge,
2 pins
-
Vehicle Identification Number (VIN) from: 1J-
X- 250001 - Number of pins: 4
- Colour Coding: green
- Manufacturer: JP GROUP
- Lisainfo: Sender for water temperature gauge 4 pins
- Additional information: Sender for water temperature gauge 4 pins
- Operating voltage [V]: 12
- Sensor Type: NTC Sensor
- Switch Point [°C]: 150
- Diameter [mm]: 20
- Number of pins: 4
- Manufacturer: JP GROUP
-
Lisainfo: Temperature sensor for cooling system,
4 pins -
Additional information: Temperature sensor for cooling system,
4 pins
-
Vehicle Identification Number (VIN) from: 1J-
X- 250 001 - Thread Size: M10x1
- Colour: brown
- Number of pins: 1
- Manufacturer: DELLO AUTOMEGA
- Engine Code: AGP
- Pressure [bar]: 1
- Spanner Size: 24
- Number of pins: 1
- Manufacturer: KAVO
- Model Year to: 2001
-
Vehicle Identification Number (VIN) from: 1J-
W- 000 001 - Vehicle Equipment: for vehicles with air conditioning
- Number of pins: 2
- Switch Point [°C]: 119
- Lisainfo: Thermo switch for air condition 119 C
- Additional information: Thermo switch for air condition 119 C
- Switch point from [bar]: 0.55
- Switch point to [bar]: 0.85
- Weight [kg]: 0.031
- Required quantity: 1
- External Thread [mm]: M10 x 1
- Number of connectors: 1
- Spanner Size: 22
- Supplementary Article/Info 2: with seal ring
- Colour Coding: brown
- General Information: Oil pressure sensor
- Manufacturer: VIKA
- Switch point from [bar]: 0.55
- Switch point to [bar]: 0.85
- Weight [kg]: 0.031
- Required quantity: 1
- External Thread [mm]: M10 x 1
- Number of connectors: 1
- Spanner Size: 22
- Supplementary Article/Info 2: with seal ring
- Colour Coding: brown
- General Information: Oil pressure sensor
- Manufacturer: VIKA
- Thread Size: M 10x1
- Housing Colour: blue
- Manufacturer: FAE
- Connector Shape: D Shape
- Operating Mode: Hydraulic
- Colour Coding: brown
- Thread Size: M 10
- Thread Pitch [mm]: 1
- Number of pins: 1
-
Control Range [bar]: 0,
55 - 0, 85 - Supplementary Article/Info 2: with seal ring
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fabrication Number: ECC-
AU- 004 - Socket colour: brown
- Number of pins: 1
- Supplementary Article/Info 2: with seal ring
- Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- for OE number: 1100619
- Manufacturer: KAMOKA
- Corresponds to the original part in colour: brown
- Pressure from [bar]: 0.5
- Thread Size: M10X1
- Spanner Size: 24
- for OE number: 038919081K
- Manufacturer: MEAT&DORIA
- for OE number: 59919501
- Temperature range to [°C]: 150
- Manufacturer: KAMOKA
- for OE number: 191 919 369 A S1
- Housing Colour: white
- Manufacturer: KAMOKA
- General Information: Exterior temperature sensor
- Manufacturer: VIKA
-
Fabrication Number: ECT-
AU- 008 - Number of pins: 4
- Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Pressure [bar]: 0.9
- Thread Size: M10 x 1
- Technical Information Number: circuit N.O.
- Manufacturer: ERA
- Weight [kg]: 0.02
- Number of connectors: 4
- Outer Diameter [mm]: 20
- Plug Type ID: 4
- Colour: green
- Required quantity: 1
- General Information: Coolant temperature sensor; green; 4 pins
- Manufacturer: VIKA
-
Fabrication Number: ECT-
AU- 004 - Number of pins: 4
- Colour Coding: green
- Connector Shape: oval
- Manufacturer: NTY
-
Name: NTY ECT-
AU- 004
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
for OE number: 28 906 081,
95VW 12A697 DA - Colour: black
- Number of pins: 2
- Connector Shape: rectangular
-
Fabrication Number: ECT-
AU- 002 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Operating Mode: Manual
- Switch Point [°C]: 10
- Number of pins: 2
- Vehicle Equipment: for vehicles with air conditioning
-
Lisainfo: Thermo switch for air condition 10/
1.7 C -
Additional information: Thermo switch for air condition 10/
1.7 C
-
Vehicle Identification Number (VIN) from: 1J-
X- 250 001 - Pressure [bar]: 8.5
-
Housing Colour: dark-
brown - Thread Size: M10x1.0
- Diameter [mm]: 24
- Spanner Size: 24
- Number of pins: 1
- Manufacturer: DELPHI
- Name: DE SW90017
- Quality class: PJ
Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"
-
Vehicle Identification Number (VIN) from: 1J-
4- 000 001, 1J- 6- 000 001 - Number of pins: 4
- Colour: green
- Manufacturer: DELLO AUTOMEGA
- Engine Code: AGP
- Colour: brown
- Pressure to [bar]: 0.85
- Pressure from [bar]: 0.55
- Pressure [bar]: 0.7
- Thread Size: M10x1
- Spanner Size: 24
- Name: EP 1.800.132
- Manufacturer: EPS
- Engine Code: AGP
- Colour: brown
- Pressure to [bar]: 0.85
- Pressure from [bar]: 0.55
- Pressure [bar]: 0.7
- Thread Size: M10x1
- Spanner Size: 24
- Manufacturer: FACET
- Engine Code: AGP
- Number of connectors: 4
- Manufacturer: 3RG
- Switch Pressure [bar]: 0.7
- Thread Size: M10x1.0
-
Sensor Type: Open-
style sensor - Manufacturer: VERNET
-
Vehicle Identification Number (VIN) to: 1J-
X- 250000 - Colour Coding: green
- Connector Shape: rectangular
- Sensor Type: NTC Sensor
- Number of pins: 4
- for OE number: 059 919 501
-
Supplementary Article/Info 2: with clip,
with seal ring - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Vehicle Identification Number (VIN) from: 1J-
X- 250001 - Thread Size: M 10x1
- Housing Colour: brown
- Pressure [bar]: 0.7
- Manufacturer: FAE
- Number of pins: 3
- Supplementary Article/Info 2: with clip
- Guarantee: 3 years guarantee
- Weight [kg]: 0.1
- Always compare old and new part (in particular OE No.):
- Name: CE 17SKV550
- Manufacturer: ESEN SKV
-
Anduritüüp: NTC-
andur - Montaaživiis: klemmitud
- Pistikukatte kuju: ristkülik
- Pistikkontaktide arv: 4
- Pistiku värv: must
- OE-numbri jaoks: 059919501
- Piirangutega toode/piirangu info 2: koos osadega
- Manufacturer: NRF
- alternatively:
- Housing Colour: black
- Number of pins: 4
- Spanner Size: 0
- Manufacturer: DELPHI
-
Name: DE TS10236-
12B1
- Number of connectors: 4
- Connector Shape: angular
- Thread Size: 20 mm
- Manufacturer: VERNET
- Additional information: WS2605 VERNET
- Lisainfo: WS2605 VERNET
-
Anduritüüp: NTC-
andur - Montaaživiis: klemmitud
-
Pistikukatte kuju: D-
kuju - Pistikkontaktide arv: 2
- OE-numbri jaoks: 06A919501
- Piirangutega toode/piirangu info 2: koos osadega
- Manufacturer: NRF
- Engine Code: AQM
- Switch point from [bar]: 0.55
- Switch point to [bar]: 0.85
- External Thread Size: M10 x 1
- Spanner Size: 22
- Number of connectors: 1
- Colour Coding: brown
- Weight [kg]: 0.031
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Surve (bar): 0,
7 - Keermemõõt: M10 x 1
- Pistikkontaktide arv: 1
- tehnilise informatsiooni number: circuit N.O.
- Manufacturer: ERA
- Cable Length [mm]: 535
-
Fabrication Number: ECP-
AU- 008 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Connector Shape: D Shape
- Material: Plastic
- Number of pins: 4
- Plug Type: Female
- Sensor Type: NTC Sensor
- Name: NI 207009
- Manufacturer: NISSENS
Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.
-
Vehicle Identification Number (VIN) from: 1J-
X- 250001 - Colour Coding: green
- Connector Shape: oval
- Sensor Type: NTC Sensor
- Number of pins: 4
-
for OE number: 059 919 501A,
1 124 770 - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Anduritüüp: NTC-
andur - Montaaživiis: klemmitud
-
Pistikukatte kuju: D-
kuju - Pistikkontaktide arv: 4
- OE-numbri jaoks: 059919501A
- Piirangutega toode/piirangu info 2: koos osadega
- Manufacturer: NRF
- for OE number: 059 919 501
- Manufacturer: TRUCKTEC
- Weight [kg]: 0.02
- Number of connectors: 4
- Outer Diameter [mm]: 20
- Plug Type ID: 4
- Colour: black
- Required quantity: 1
- General Information: Coolant temperature sensor; black; 4 pins
- Manufacturer: VIKA
- Engine Code: AQM
- Switch point from [bar]: 0.55
- Switch point to [bar]: 0.85
- External Thread Size: M10 x 1
- Spanner Size: 22
- Number of connectors: 1
- Colour Coding: brown
- Weight [kg]: 0.031
- Supplementary Article/Info 2: with seal ring
- Name: SW 30 91 9018
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thread Size: 20 mm
- Number of pins: 2
- Manufacturer: VERNET
- Additional information: WS2607
- Lisainfo: WS2607
- Number of connectors: 4
- Connector Shape: round
- Thread Size: 20 mm
- Number of pins: 4
- Manufacturer: VERNET
- Housing Colour: dark green
- Number of pins: 4
- Spanner Size: 0
- Manufacturer: DELPHI
- Name: DE TS10279
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Tightening torque from [Nm]: 20
- Voltage [V]: 12
- Combi Switch Function: Normally Open Contact
- Current Strength [A]: 0.15
- Tolerance [%]: 15
- Thread Size: M10x1
- Spanner Size: 24
- Pressure from [bar]: 0.555
- Pressure to [bar]: 0.85
- Number of pins: 1
- Corresponds to the original part in colour: brown
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Vehicle Identification Number (VIN) to: ******1J*X*350001
- Temperature range to [°C]: 150
- Outer Diameter [mm]: 20
- Number of connectors: 4
- Weight [kg]: 0.2
-
Supplementary Article/Supplementary Info: with gasket/
seal, with retaining spring - Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Control Range [bar]: 0.55/
0.85BAR - Colour: brown
-
General Information: Oil pressure sensor; 1 pin; brown; 0.55-
0.85 BAR - Manufacturer: BORSEHUNG
- Vehicle Identification Number (VIN) from: ******1J*X*350001
- Number of connectors: 4
- Weight [kg]: 0.038
-
Supplementary Article/Supplementary Info: with retaining spring,
with gasket/ seal - Manufacturer: FEBI BILSTEIN
- Additional information: FE32510
- Lisainfo: FE32510
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: AGP
- Colour: grey
-
for article number: 1.660.015K,
1.830.278K, 1.879.946 - Name: EP 1.830.278
- Manufacturer: EPS
-
Additional information: 1-
830- 278 -
Lisainfo: 1-
830- 278
- Engine Code: AGP
- Housing Colour: green
- Corresponds to the original part in colour: black
- Name: EP 1.830.258
- Manufacturer: EPS
- Engine Code: AGP
- Colour: grey
-
for article number: 26.0015K,
7.3278K, 7.7946 - Manufacturer: FACET
- for OE number: 51271207038
- Sensor Type: Passive sensor
- Manufacturer: KAMOKA
- Engine Code: AGP
- Housing Colour: green
- Corresponds to the original part in colour: black
- Manufacturer: FACET
- for OE number: 9118368
- Sensor Type: Passive sensor
- Manufacturer: KAMOKA
- for OE number: 078 919 501 C
- Manufacturer: TRUCKTEC
-
Fabrication Number: ECC-
AU- 001 - Thread Size: M10x1
- Number of pins: 2
- Socket colour: grey
- Supplementary Article/Info 2: with seal ring
- Spanner Size: 22
- Connector Shape: oval
- Manufacturer: NTY
-
Name: NTY ECC-
AU- 001
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Thread Size: M20
- Number of pins: 2
- Housing Colour: grey
- Connector Shape: oval
- Manufacturer: ERA
- Vehicle Identification Number (VIN) to: ******1J*X*350001
- Temperature range to [°C]: 150
- Outer Diameter [mm]: 20
- Number of connectors: 4
- Colour: green
- Weight [kg]: 0.2
-
Supplementary Article/Supplementary Info: with gasket/
seal, with retaining spring - Name: SW 30 93 1539
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Vehicle Identification Number (VIN) from: ******1J*X*350001
- Number of connectors: 4
- Weight [kg]: 0.038
-
Supplementary Article/Supplementary Info: with gasket/
seal, with retaining spring - Name: SW 30 93 2510
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Voltage [V]: 12
- Number of pins: 4
- Guarantee: 3 years guarantee
- Weight [kg]: 0.02
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV345
- Switch pressure from [bar]: 0.55
- Switch pressure to [bar]: 0.85
- Pressure [bar]: 0.7
- Thread Size: M10x1
-
Corresponds to the original part in colour: brown,
black - Manufacturer: METZGER
Manufacturer: MAGNETI MARELLI
- Number of pins: 4
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [kg]: 0.3
- Packaging length [cm]: 12
- Packaging width [cm]: 8
- Packaging height [cm]: 6
- Version: 2
- Number of pins: 2
- Weight [kg]: 0.3
- Packaging length [cm]: 12
- Packaging width [cm]: 8
- Packaging height [cm]: 6
-
Engine Code: AQM,
AGP - Number of pins: 2
- Housing Colour: black
- Connector Shape: rectangular
- Guarantee: 3 years guarantee
- Weight [kg]: 0.02
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV680
-
Engine Code: AQM,
AGP -
Vehicle Identification Number (VIN) from: 1J-
1- 320001 - Operating Mode: Mechanical
- Number of pins: 2
- Combi Switch Function: Normally Open Contact
- Colour: blue
- Material: Plastic
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Construction Year to: 12.2001
-
Vehicle Identification Number (VIN) to: F 1J-
X- 250 000 - Number of pins: 4
- Supplementary Article/Info 2: with seal ring
- Colour: black
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Required quantity: 1
- Construction Year from: 01.2000
- Number of pins: 4
- Supplementary Article/Info 2: with seal ring
- Colour: green
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- for OE number: 038 907 319 A
- Cable Length [mm]: 500
- Sensor Type: Passive sensor
- Manufacturer: KAMOKA
- General Information: Intake air temperature sensor
- Manufacturer: VIKA
- Connector Shape: rectangular
- Number of pins: 2
-
Housing material: GRP
(Glass fibre Reinforced Plastic), PA 6 GF 30 - Sensor Type: NTC Sensor
- for OE number: 028 906 081
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Housing Colour: grey
- Number of pins: 2
- Spanner Size: 0
- Manufacturer: DELPHI
- Name: DE TS10278
- Number of pins: 4
- Socket colour: black
- Manufacturer: ERA
-
Vehicle Identification Number (VIN) from: 1J-
X- 250 001 - Number of pins: 4
- Colour: green
-
Supplementary Article/Supplementary Info: with gasket/
seal - Version: IAM
- Article number of recommended accessories: 0905458
- Power [W]: 0.06
- Manufacturer: METZGER
- Construction Year to: 04.2001
- Vehicle Equipment: for vehicles with power steering
- Guarantee: 3 years guarantee
- Weight [kg]: 0.06
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV ESEN
- Transmission Type: Manual Transmission
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.04
- Always compare old and new part (in particular OE No.):
- Name: CE 17SKV551
- Manufacturer: ESEN SKV
- Mounting Type: Plugged
- Voltage [V]: 12
-
Supplementary Article/Supplementary Info: with gasket/
seal - Colour: black
- Sensor Type: NTC Sensor
- Number of pins: 2
- Supplementary Article/Info 2: with retaining ring
-
Corresponds to the original part in colour: black,
grey - Fitting Depth [mm]: 20
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Manufacturer: HELLA
- Name: HE 6PT009309331
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Vehicle Equipment: for vehicles with power steering
- Construction Year to: 04.2001
- Connector Shape: D Shape
- Operating Mode: Hydraulic
- Colour Coding: grey
- Thread Size: M 10
- Thread Pitch [mm]: 1
- Number of pins: 2
-
Control Range [bar]: 0,
28 - 0, 40 - Supplementary Article/Info 2: with seal ring
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Pistikukatte kuju: ristkülik
- Materjal: Messing
- Pistikkontaktide arv: 4
- Pistikute teostus: Male
-
Anduritüüp: NTC-
andur - Võtmekaugus: 20 mm
- Manufacturer: NISSENS
Tehniline informatsioon: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.
- Cable Length [mm]: 535
- Number of pins: 3
- Sensor Type: Inductive Sensor
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Number of pins: 4
- Manufacturer: ERA
- Voltage [V]: 12
- Number of pins: 2
- Housing Colour: black
- Manufacturer: FAE
- Cable Length [mm]: 460
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.1
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV506
- Sensor Type: NTC Sensor
- Supplementary Article/Info 2: without seal ring
- Colour: green
- Number of pins: 4
- Manufacturer: MEYLE
- Engine Code: AGP
- Colour: blue
- Corresponds to the original part in colour: blue
- Name: EP 1.830.260
- Manufacturer: EPS
Manufacturer: MAGNETI MARELLI
- Engine Code: AGP
- Colour: blue
- Corresponds to the original part in colour: blue
- Manufacturer: FACET
- Version: 2
-
Pistikukatte kuju: D-
kuju - Materjal: Plastik
- Pistikkontaktide arv: 2
- Pistikute teostus: Female
-
Anduritüüp: NTC-
andur - Manufacturer: NISSENS
Tehniline informatsioon: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.
-
Vehicle Identification Number (VIN) to: 1J-
X- 990 000 - Number of pins: 4
- Housing Colour: blue
-
Corresponds to the original part in colour: green,
blue -
Supplementary Article/Supplementary Info: with gasket/
seal - Power [W]: 0.06
- Manufacturer: METZGER
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.05
- Always compare old and new part (in particular OE No.):
- Name: CE 17SKV552
- Manufacturer: ESEN SKV
- Mounting Type: Plugged
- Voltage [V]: 12
-
Supplementary Article/Supplementary Info: with gasket/
seal - Colour: green
- Sensor Type: NTC Sensor
- Number of pins: 4
- Supplementary Article/Info 2: with retaining ring
-
Corresponds to the original part in colour: green,
black - Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PT009107141
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Number of connectors: 4
- Connector Shape: round
-
Supplementary Article/Supplementary Info: with gasket/
seal - for OE number: 059 919 501 A
- Colour Coding: green
- Spring Design: Retaining Spring
- Number of pins: 4
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of pins: 2
- Fitting Position: Footwell
- Colour: black
-
Operating Mode: Mechanical,
Manual (foot operated), Electric - Material: Plastic
-
Mounting Type: Plug-
in connection - adjustable: adjustable
- Combi Switch Function: Normally Open Contact
- Rated Voltage [V]: 12
- Connector Shape: angular
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Mounting Type: Plugged
- Voltage [V]: 12
-
Supplementary Article/Supplementary Info: with gasket/
seal - Colour: green
- Sensor Type: NTC Sensor
- Number of pins: 4
- Supplementary Article/Info 2: with retaining ring
-
Corresponds to the original part in colour: green,
blue - Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PT009107541
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Engine Code: AGP
- Name: EP 1.994.013
- Manufacturer: EPS
- Engine Code: AGP
- Manufacturer: FACET
- Voltage [V]: 12
- Number of pins: 2
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
-
Transmission Type: 4-
Speed Automatic Transmission - Number of pins: 2
- Guarantee: 3 years guarantee
- Weight [kg]: 0.03
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV505
- Number of pins: 2
- Connector Shape: rectangular
- Colour: black
- for OE number: 1003742
- Manufacturer: MEAT&DORIA
-
Vehicle Identification Number (VIN) from: 1J-
Y- 000 001 - Cable Length [mm]: 535
- Number of connectors: 3
- Housing Colour: black
-
Lisainfo: Sensor,
crankshaft pulse -
Additional information: Sensor,
crankshaft pulse
- Outer Diameter [mm]: 20
- Weight [kg]: 0.02
- Number of connectors: 4
- Colour: black
- Required quantity: 1
- General Information: Coolant temperature sensor; 4 pin; black
- Manufacturer: BORSEHUNG
- Pressure from [bar]: 0.55
- Pressure to [bar]: 0.85
- Combi Switch Function: Normally Open Contact
- Colour: brown
- Spanner Size: 24
-
Thread Size: M10 x 1,
0 - Number of pins: 1
- Manufacturer: MEYLE
- Number of pins: 2
- Sensor Type: Inductive Sensor
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Outer Diameter [mm]: 20
- Weight [kg]: 0.02
- Number of connectors: 4
- Colour: green
- Required quantity: 1
- General Information: Coolant temperature sensor; 4 pin; green
- Manufacturer: BORSEHUNG
- Number of pins: 2
- Connector Shape: rectangular
- Manufacturer: ERA
- Vehicle Identification Number (VIN) from: ******1J*Y*000001
- Housing Colour: grey
- Length [mm]: 67
- External Thread Size: M10 x 1
- Spanner Size: 22
- Number of connectors: 2
- Shifting Points [bar]: 0.3
- Weight [kg]: 0.055
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of pins: 4
-
Supplementary Article/Supplementary Info: with gasket/
seal - Net Weight [g]: 23
- Packaging width [cm]: 6.7
- Packaging length [cm]: 8.7
- Packaging height [cm]: 9.2
- Name: MH TSE1D
- Manufacturer: MAHLE
General Information: SIMPLE FIT - Installation accessories, such as O-rings, seals, screws, nuts, bolts, and hose clips, are included with the product.
- Construction Year to: 05.2006
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.06
- Always compare old and new part (in particular OE No.):
- Name: CE 17SKV486
- Manufacturer: ESEN SKV
- Vehicle Identification Number (VIN) from: ******1J*Y*000001
- Length [mm]: 67
- Housing Colour: grey
- External Thread Size: M10 x 1
- Spanner Size: 22
- Number of connectors: 2
- Shifting Points [bar]: 0.3
- Weight [kg]: 0.055
- Name: SW 33 10 4569
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Weight [kg]: 0.1
- Number of connectors: 3
- Required quantity: 1
- General Information: Crankshaft position sensor
- Manufacturer: VIKA
- Construction Year to: 04.2001
- Thread Size: M10 x 1
- Number of pins: 2
- Pressure to [bar]: 0.4
- Pressure [bar]: 0.28
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Engine Code: AQM
- Vehicle Identification Number (VIN) to: 1J X 800 000
- Voltage [V]: 12
- Supplementary Article/Supplementary Info: without cable pull
- Number of pins: 2
- Guarantee: 3 years guarantee
- Weight [kg]: 0.02
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV
Transmission Type: 4-Speed Automatic Transmission, Automatic Transmission
-
Vehicle Identification Number (VIN) from: 1J-
Y- 000001 - Connector Shape: D Shape
- Number of pins: 3
- Supplementary Article/Info 2: with cable
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Anduritüüp: NTC-
andur - Montaaživiis: klemmitud
- Pistikukatte kuju: ristkülik
- Pistikkontaktide arv: 4
- Pistiku värv: must
- OE-numbri jaoks: 058919501A
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Manufacturer: NRF
-
Control Range [bar]: 28/
40BAR -
General Information: Oil pressure sensor; 28/
40 BAR - Manufacturer: BORSEHUNG
- Pressure [bar]: 0.35
- Thread Size: M10 x 1
- Number of pins: 2
- Technical Information Number: circuit N.O.
- Manufacturer: ERA
- General Information: Transmission speed sensor
- Manufacturer: VIKA
Manufacturer: VERNET
-
Engine Code: AQM,
AGP -
Vehicle Identification Number (VIN) from: 1J-
Y- 000 001 - Number of Gears: 4 Speed
- Block Separation:
- Number of pins: 3
-
Supplementary Article/Info 2: with seal ring,
with cable - Connector Shape: angular
- Manufacturer: VEMO GERMANY
Transmission Type: Automatic Transmission, 4-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 058 919 501 A
- Number of pins: 4
- Fitted Diameter [mm]: 20
- Housing Colour: black
- Manufacturer: FAE
- Pistikukatte kuju: ristkülik
- Materjal: Messing
- Pistikkontaktide arv: 4
- Pistikute teostus: Male
-
Anduritüüp: NTC-
andur - Võtmekaugus: 20 mm
- Name: NI 207061
- Manufacturer: NISSENS
Tehniline informatsioon: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.
Manufacturer: MAGNETI MARELLI
- Thread Size: 20 mm
- Manufacturer: VERNET
- Supplementary Article/Info 2: with cable
- Length [mm]: 535
- Height [mm]: 46
-
Resistor [Ohm]: 1,
200 - Number of connectors: 3
- Manufacturer: VERNET
-
Vehicle Identification Number (VIN) to: 1J-
1- 320 000 - Mounting Type: Bayonet
- Voltage [V]: 12
- Number of pins: 2
- Operating Mode: Electric
- Colour: black
- Combi Switch Function: Normally Open Contact
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6DD008622701
- Number of pins: 3
- Connector Shape: D Shape
- Cable Length [mm]: 535
- Sensor Type: Inductive Sensor
- for OE number: 038907319A
- Manufacturer: MEAT&DORIA
- Number of connectors: 4
- Diameter [mm]: 25
- Length [mm]: 50
-
Supplementary Article/Supplementary Info: with gasket/
seal - for OE number: 059 919 501
- Spring Design: Retaining Spring
- Number of pins: 4
- Connector Shape: angular
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of pins: 4
- Colour Coding: white
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Diameter [mm]: 26
- Number of pins: 2
- Supplementary Article/Info 2: with seal ring
- Spring Design: Retaining Spring
- Length [mm]: 20
- Housing Colour: blue
- Height [mm]: 57
- Colour: grey
- Number of connectors: 2
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Cable Length [mm]: 500
- Number of pins: 3
- Manufacturer: DELPHI
- Name: DE SS11053
- General Information: Crankshaft position sensor
- Manufacturer: VIKA
-
Supplementary Article/Supplementary Info: with gasket/
seal - Number of pins: 4
- Mounting Type: Pressed
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
-
Vehicle Identification Number (VIN) from: 1J-
Y- 000 001 - for OE number: 038 957 147 C
- Number of pins: 3
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Vehicle Identification Number (VIN) from: ******1J*Y*000001
- Length [mm]: 535
- Number of connectors: 3
- Cable Length [mm]: 450
- Weight [kg]: 0.1
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: AQM
- Number of pins: 2
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PT009109281
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Number of connectors: 3
- Number of mounting bores: 1
- Cable Length 1 [mm]: 450
- Fitting Depth [mm]: 46
-
Operating temperature from [°C]: -
40 - Operating temperature to [°C]: 125
- Sensor Type: Inductive Sensor
- Connector Shape: D Shape
-
Colour: grey/
black - Name: SN CKP154.09
- Manufacturer: SNR
Vehicle Identification Number (VIN): [1J-Y-000001;], [1U-Y-284730;], [6K-Y-507 601;], [;8L-21050000], [;8L-2-150000], [8L-Y-000001;]
- Model Year to: 2001
-
Vehicle Identification Number (VIN) from: 1J-
W- 000 001 - Length [mm]: 22
- Height [mm]: 61
- Thread Size: M10 x 1
-
Control Range [bar]: 0,
28 - 0, 40 - Vehicle Equipment: for vehicles with power steering
- Number of pins: 2
- Manufacturer: VIEROL
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: AGP
- Length [mm]: 535
- Name: EP 1.953.391
- Manufacturer: EPS
- Number of pins: 4
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [kg]: 0.3
- Packaging length [cm]: 12
- Packaging width [cm]: 8
- Packaging height [cm]: 6
- for OE number: 058919501A
- Engine Code: AGP
- Length [mm]: 535
- Manufacturer: FACET
-
Resistor [Ohm]: 1,
200 - Cable Length [mm]: 535
- Sensor Type: Inductive Sensor
- Number of pins: 3
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
-
Engine Code: AQM,
AGP -
Vehicle Identification Number (VIN) from: 1J-
Y- 000 001 -
Transmission Type: 4-
Speed Automatic Transmission - Block Separation:
- Length [mm]: 59
-
Supplementary Article/Info 2: for crankshaft,
with seal ring, without cable - Required quantity: 1
- Resistor [Ohm]: 850
- Colour: black
- Sensor Type: Inductive Sensor
- Number of pins: 2
- Number of connectors: 2
- Rated Voltage [V]: 12
- Fitting Depth [mm]: 30.3
- Connector Shape: D Shape
- Manufacturer: VIEROL
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: AGP
- Colour: black
- Temperature range [°C]: 120
- Fitting Depth [mm]: 20
- Name: EP 1.830.232
- Manufacturer: EPS
- Engine Code: AGP
- Colour: black
- Fitting Depth [mm]: 20
- Manufacturer: FACET
- Required quantity: 1
-
Vehicle Identification Number (VIN) to: 1J-
X- 999 999 - Number of pins: 3
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Cable Length [mm]: 500
- Number of pins: 3
- Fitting Depth [mm]: 46
- Resistor [kOhm]: 1.1
- Manufacturer: ERA
- Engine Code: AQM
-
Vehicle Identification Number (VIN) from: 1J-
Y- 000001 - Number of pins: 3
- Housing Colour: grey
- Manufacturer: FAE
-
Vehicle Identification Number (VIN) from: 1J-
X- 250 001 - Installatsiooni sügavus (mm): 20
- Ühenduste arv: 4
- Manufacturer: BERU
- Vehicle Identification Number (VIN) to: ******1J*X*999999
- Length [mm]: 453
- Number of connectors: 3
- Weight [kg]: 0.1
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Vehicle Identification Number (VIN) to: ******1J*X*999999
- Length [mm]: 453
- Number of connectors: 3
- Weight [kg]: 0.1
- Supplementary Article/Info 2: with seal ring
- Name: SW 30 92 4576
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Manufacturer: MAGNETI MARELLI
- Number of pins: 3
- Housing Colour: black
- Manufacturer: FAE
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks